Commit 4b087ff8 authored by Rajendra Nayak's avatar Rajendra Nayak Committed by Tony Lindgren
Browse files

omap3sdp: Fix regulator mapping for ads7846 TS controller



On the OMAP3430SDP board, the ads7846 touchscreen controller
is powered by VAUX3 regulator (supplying 2.8v).
Fix this mapping in the board file, and hence prevent
the ads7846 driver init to fail with the below error..

ads7846 spi1.0: unable to get regulator: -19
Signed-off-by: default avatarRajendra Nayak <rnayak@ti.com>
Reviewed-by: default avatarFelipe Balbi <balbi@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 854c122f
...@@ -426,6 +426,11 @@ static struct twl4030_madc_platform_data sdp3430_madc_data = { ...@@ -426,6 +426,11 @@ static struct twl4030_madc_platform_data sdp3430_madc_data = {
.irq_line = 1, .irq_line = 1,
}; };
/* ads7846 on SPI */
static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
REGULATOR_SUPPLY("vcc", "spi1.0"),
};
/* /*
* Apply all the fixed voltages since most versions of U-Boot * Apply all the fixed voltages since most versions of U-Boot
* don't bother with that initialization. * don't bother with that initialization.
...@@ -468,6 +473,8 @@ static struct regulator_init_data sdp3430_vaux3 = { ...@@ -468,6 +473,8 @@ static struct regulator_init_data sdp3430_vaux3 = {
.valid_ops_mask = REGULATOR_CHANGE_MODE .valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS, | REGULATOR_CHANGE_STATUS,
}, },
.num_consumer_supplies = ARRAY_SIZE(sdp3430_vaux3_supplies),
.consumer_supplies = sdp3430_vaux3_supplies,
}; };
/* VAUX4 for OMAP VDD_CSI2 (camera) */ /* VAUX4 for OMAP VDD_CSI2 (camera) */
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment