Commit 49b4ff33 authored by Simon Arlott's avatar Simon Arlott Committed by Adrian Bunk
Browse files

spelling fixes: arch/cris/



Spelling fixes in arch/cris/.
Signed-off-by: default avatarSimon Arlott <simon@fire.lp0.eu>
Signed-off-by: default avatarAdrian Bunk <bunk@kernel.org>
parent c3a2ddee
......@@ -8,7 +8,7 @@
*
* malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
* puts by Nick Holloway 1993, better puts by Martin Mares 1995
* adoptation for Linux/CRIS Axis Communications AB, 1999
* adaptation for Linux/CRIS Axis Communications AB, 1999
*
*/
......
......@@ -83,7 +83,7 @@
*
* Revision 1.4 2002/11/19 14:35:24 starvik
* Changes from linux 2.4
* Changed struct initializer syntax to the currently prefered notation
* Changed struct initializer syntax to the currently preferred notation
*
* Revision 1.3 2002/11/06 09:47:03 starvik
* Modified for new interrupt macros
......
......@@ -84,7 +84,7 @@
* with time based on jiffies and *R_TIMER0_DATA, uses a table
* for fast conversion of timer value to microseconds.
* (Much faster the standard do_gettimeofday() and we don't really
* wan't to use the true time - we wan't the "uptime" so timers don't screw up
* want to use the true time - we want the "uptime" so timers don't screw up
* when we change the time.
* TODO: Add efficient support for continuous timers as well.
*
......
......@@ -169,7 +169,7 @@ init_IRQ(void)
for (i = 0; i < 256; i++)
etrax_irv->v[i] = weird_irq;
/* Initialize IRQ handler descriptiors. */
/* Initialize IRQ handler descriptors. */
for(i = 2; i < NR_IRQS; i++) {
irq_desc[i].chip = &crisv10_irq_type;
set_int_vector(i, interrupt[i]);
......
......@@ -64,7 +64,7 @@ void hard_reset_now (void)
#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
cause_of_death = 0xbedead;
#else
/* Since we dont plan to keep on reseting the watchdog,
/* Since we dont plan to keep on resetting the watchdog,
the key can be arbitrary hence three */
*R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, 3) |
IO_STATE(R_WATCHDOG, enable, start);
......
......@@ -20,7 +20,7 @@ unsigned long r_timer_ctrl_shadow;
* These are only usable if there actually IS a latch connected
* to the corresponding external chip-select pin.
*
* A common usage is that CSP0 controls LED's and CSP4 video chips.
* A common usage is that CSP0 controls LEDs and CSP4 video chips.
*/
unsigned long port_cse1_shadow;
......
......@@ -41,7 +41,7 @@ void *memcpy(void *pdst,
Make sure the compiler is able to make something useful of this.
As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
If gcc was allright, it really would need no temporaries, and no
If gcc was alright, it really would need no temporaries, and no
stack space to save stuff on. */
register void *return_dst __asm__ ("r10") = pdst;
......
......@@ -38,7 +38,7 @@ __copy_user (void __user *pdst, const void *psrc, unsigned long pn)
As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
FIXME: Comment for old gcc version. Check.
If gcc was allright, it really would need no temporaries, and no
If gcc was alright, it really would need no temporaries, and no
stack space to save stuff on. */
register char *dst __asm__ ("r13") = pdst;
......@@ -200,7 +200,7 @@ __copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn)
As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
FIXME: Comment for old gcc version. Check.
If gcc was allright, it really would need no temporaries, and no
If gcc was alright, it really would need no temporaries, and no
stack space to save stuff on. */
register char *dst __asm__ ("r13") = pdst;
......@@ -380,7 +380,7 @@ __do_clear_user (void __user *pto, unsigned long pn)
As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
FIXME: Comment for old gcc version. Check.
If gcc was allright, it really would need no temporaries, and no
If gcc was alright, it really would need no temporaries, and no
stack space to save stuff on. */
register char *dst __asm__ ("r13") = pto;
......
......@@ -8,7 +8,7 @@
*
* malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
* puts by Nick Holloway 1993, better puts by Martin Mares 1995
* adoptation for Linux/CRIS Axis Communications AB, 1999
* adaptation for Linux/CRIS Axis Communications AB, 1999
*
*/
......@@ -151,7 +151,7 @@ serout(const char *s, reg_scope_instances regi_ser)
do {
rs = REG_RD(ser, regi_ser, rs_stat_din);
}
while (!rs.tr_rdy);/* Wait for tranceiver. */
while (!rs.tr_rdy);/* Wait for transceiver. */
REG_WR(ser, regi_ser, rw_dout, dout);
}
......@@ -264,7 +264,7 @@ serial_setup(reg_scope_instances regi_ser)
tr_ctrl.stop_bits = 1; /* 2 stop bits. */
/*
* The baudrate setup is a bit fishy, but in the end the tranceiver is
* The baudrate setup is a bit fishy, but in the end the transceiver is
* set to 4800 and the receiver to 115200. The magic value is
* 29.493 MHz.
*/
......
......@@ -205,7 +205,7 @@ static struct mtd_info *probe_cs(struct map_info *map_cs)
/*
* Probe each chip select individually for flash chips. If there are chips on
* both cse0 and cse1, the mtd_info structs will be concatenated to one struct
* so that MTD partitions can cross chip boundries.
* so that MTD partitions can cross chip boundaries.
*
* The only known restriction to how you can mount your chips is that each
* chip select must hold similar flash chips. But you need external hardware
......
......@@ -275,7 +275,7 @@ i2c_getack(void)
ack = 0;
i2c_delay(CLOCK_HIGH_TIME/2);
if(!ack){
if(!i2c_getbit()) /* receiver pulld SDA low */
if(!i2c_getbit()) /* receiver pulled SDA low */
ack = 1;
i2c_delay(CLOCK_HIGH_TIME/2);
}
......
......@@ -138,7 +138,7 @@ struct mtd_info* __init crisv32_nand_flash_probe (void)
/* Enable the following for a flash based bad block table */
this->options = NAND_USE_FLASH_BBT;
/* Scan to find existance of the device */
/* Scan to find existence of the device */
if (nand_scan (crisv32_mtd, 1)) {
err = -ENXIO;
goto out_ior;
......
......@@ -97,7 +97,7 @@
* with time based on jiffies and *R_TIMER0_DATA, uses a table
* for fast conversion of timer value to microseconds.
* (Much faster the standard do_gettimeofday() and we don't really
* wan't to use the true time - we wan't the "uptime" so timers don't screw up
* want to use the true time - we want the "uptime" so timers don't screw up
* when we change the time.
* TODO: Add efficient support for continuous timers as well.
*
......
......@@ -140,7 +140,7 @@ block_irq(int irq, int cpu)
spin_lock_irqsave(&irq_lock, flags);
intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask);
/* Remember; 1 let thru, 0 block. */
/* Remember; 1 let through, 0 block. */
intr_mask &= ~(1 << (irq - FIRST_IRQ));
REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, intr_mask);
......@@ -156,7 +156,7 @@ unblock_irq(int irq, int cpu)
spin_lock_irqsave(&irq_lock, flags);
intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask);
/* Remember; 1 let thru, 0 block. */
/* Remember; 1 let through, 0 block. */
intr_mask |= (1 << (irq - FIRST_IRQ));
REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, intr_mask);
......@@ -308,7 +308,7 @@ crisv32_do_multiple(struct pt_regs* regs)
*/
irq_enter();
/* Get which IRQs that happend. */
/* Get which IRQs that happened. */
masked = REG_RD_INT(intr_vect, irq_regs[cpu], r_masked_vect);
/* Calculate new IRQ mask with these IRQs disabled. */
......@@ -366,7 +366,7 @@ init_IRQ(void)
for (i = 0; i < 256; i++)
etrax_irv->v[i] = weird_irq;
/* Point all IRQ's to bad handlers. */
/* Point all IRQs to bad handlers. */
for (i = FIRST_IRQ, j = 0; j < NR_IRQS; i++, j++) {
irq_desc[j].chip = &crisv32_irq_type;
set_exception_vector(i, interrupt[j]);
......
......@@ -162,7 +162,7 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
/* Put the switch stack right below the pt_regs. */
swstack = ((struct switch_stack *) childregs) - 1;
/* Paramater to ret_from_sys_call. 0 is don't restart the syscall. */
/* Parameter to ret_from_sys_call. 0 is don't restart the syscall. */
swstack->r9 = 0;
/*
......
......@@ -347,7 +347,7 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
/* Grab and setup a signal frame.
*
* Basically a lot of state-info is stacked, and arranged for the
* user-mode program to return to the kernel using either a trampiline
* user-mode program to return to the kernel using either a trampoline
* which performs the syscall sigreturn(), or a provided user-mode
* trampoline.
*/
......@@ -641,7 +641,7 @@ ugdb_trap_user(struct thread_info *ti, int sig)
user_regs(ti)->spc = 0;
}
/* FIXME: Filter out false h/w breakpoint hits (i.e. EDA
not withing any configured h/w breakpoint range). Synchronize with
not within any configured h/w breakpoint range). Synchronize with
what already exists for kernel debugging. */
if (((user_regs(ti)->exs & 0xff00) >> 8) == BREAK_8_INTR_VECT) {
/* Break 8: subtract 2 from ERP unless in a delay slot. */
......
......@@ -142,7 +142,7 @@ smp_boot_one_cpu(int cpuid)
return -1;
}
/* Secondary CPUs starts uing C here. Here we need to setup CPU
/* Secondary CPUs starts using C here. Here we need to setup CPU
* specific stuff such as the local timer and the MMU. */
void __init smp_callin(void)
{
......
......@@ -99,7 +99,7 @@ unsigned long do_slow_gettimeoffset(void)
/* From timer MDS describing the hardware watchdog:
* 4.3.1 Watchdog Operation
* The watchdog timer is an 8-bit timer with a configurable start value.
* Once started the whatchdog counts downwards with a frequency of 763 Hz
* Once started the watchdog counts downwards with a frequency of 763 Hz
* (100/131072 MHz). When the watchdog counts down to 1, it generates an
* NMI (Non Maskable Interrupt), and when it counts down to 0, it resets the
* chip.
......
......@@ -105,7 +105,7 @@ bad_value:
/*
* This gets called from entry.S when the watchdog has bitten. Show something
* similiar to an Oops dump, and if the kernel if configured to be a nice doggy;
* similar to an Oops dump, and if the kernel is configured to be a nice doggy;
* halt instead of reboot.
*/
void
......
......@@ -41,7 +41,7 @@ void *memcpy(void *pdst,
Make sure the compiler is able to make something useful of this.
As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
If gcc was allright, it really would need no temporaries, and no
If gcc was alright, it really would need no temporaries, and no
stack space to save stuff on. */
register void *return_dst __asm__ ("r10") = pdst;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment