Commit 48502180 authored by Luotao Fu's avatar Luotao Fu Committed by David S. Miller

smc91x: remove isa stuff from smc91x driver

ISA support in smc91x is incomplete. I doubt there're any smc91x isa card.
This driver is greatly used on arm pxa platforms. Hence we remove the
isa stuff from smc91x driver.
Signed-off-by: default avatarLuotao Fu <lfu@pengutronix.de>
Acked-by: default avatarSteve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 999890b2
...@@ -90,33 +90,6 @@ static const char version[] = ...@@ -90,33 +90,6 @@ static const char version[] =
#include "smc91x.h" #include "smc91x.h"
#ifdef CONFIG_ISA
/*
* the LAN91C111 can be at any of the following port addresses. To change,
* for a slightly different card, you can add it to the array. Keep in
* mind that the array must end in zero.
*/
static unsigned int smc_portlist[] __initdata = {
0x200, 0x220, 0x240, 0x260, 0x280, 0x2A0, 0x2C0, 0x2E0,
0x300, 0x320, 0x340, 0x360, 0x380, 0x3A0, 0x3C0, 0x3E0, 0
};
#ifndef SMC_IOADDR
# define SMC_IOADDR -1
#endif
static unsigned long io = SMC_IOADDR;
module_param(io, ulong, 0400);
MODULE_PARM_DESC(io, "I/O base address");
#ifndef SMC_IRQ
# define SMC_IRQ -1
#endif
static int irq = SMC_IRQ;
module_param(irq, int, 0400);
MODULE_PARM_DESC(irq, "IRQ number");
#endif /* CONFIG_ISA */
#ifndef SMC_NOWAIT #ifndef SMC_NOWAIT
# define SMC_NOWAIT 0 # define SMC_NOWAIT 0
#endif #endif
...@@ -2314,15 +2287,6 @@ static struct platform_driver smc_driver = { ...@@ -2314,15 +2287,6 @@ static struct platform_driver smc_driver = {
static int __init smc_init(void) static int __init smc_init(void)
{ {
#ifdef MODULE
#ifdef CONFIG_ISA
if (io == -1)
printk(KERN_WARNING
"%s: You shouldn't use auto-probing with insmod!\n",
CARDNAME);
#endif
#endif
return platform_driver_register(&smc_driver); return platform_driver_register(&smc_driver);
} }
......
...@@ -265,19 +265,6 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) ...@@ -265,19 +265,6 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
#define SMC_IRQ_FLAGS (0) #define SMC_IRQ_FLAGS (0)
#elif defined(CONFIG_ISA)
#define SMC_CAN_USE_8BIT 1
#define SMC_CAN_USE_16BIT 1
#define SMC_CAN_USE_32BIT 0
#define SMC_inb(a, r) inb((a) + (r))
#define SMC_inw(a, r) inw((a) + (r))
#define SMC_outb(v, a, r) outb(v, (a) + (r))
#define SMC_outw(v, a, r) outw(v, (a) + (r))
#define SMC_insw(a, r, p, l) insw((a) + (r), p, l)
#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l)
#elif defined(CONFIG_M32R) #elif defined(CONFIG_M32R)
#define SMC_CAN_USE_8BIT 0 #define SMC_CAN_USE_8BIT 0
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment