Commit 47061eda authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull non-critical ARM soc bug fixes from Olof Johansson:
 "These were submitted as bug fixes before v3.6 but not considered
  important enough to be included in it.  Some of them cross over to
  cleanup territory as well, and aren't strictly bugfixes."

* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  ARM: nomadik: remove NAND_NO_READRDY use
  ARM: pxa: fix return value check in pxa2xx_drv_pcmcia_probe()
  ARM: SAMSUNG: Add missing variable declaration in s3c64xx_spi1_set_platdata()
  ARM: S3C24XX: removes unnecessary semicolon
  ARM: S3C24xx: delete double assignment
  ARM: EXYNOS: fix address for EXYNOS4 MDMA1
  ARM: EXYNOS: fixed SYSMMU setup definition to mate parameter name
  ARM: ep93xx: Move ts72xx.h out of include/mach
  ARM: ep93xx: use __iomem pointers for MMIO
  ARM: msm: Fix early debug uart mapping on some memory configs
  ARM: msm: io: Change the default static iomappings to be shared
  ARM: msm: io: Remove 7x30 iomap region from 7x00
  ARM: msm: Remove call to missing FPGA init on 8660
  ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write
  ARM: OMAP4: wakeupgen: Fix the typo in AUXCOREBOOT register save
  dma: tegra: make data used as *of_device_id.data const
  can: mpc5xxx_can: make data used as *of_device_id.data const
  macintosh/mediabay: make data used as *of_device_id.data const
  i2c/mpc: make data used as *of_device_id.data const
  mfd/da9052: make i2c_device_id array const
  ...
parents 797b9e5a b10dcdca
......@@ -2312,7 +2312,7 @@ menu "Power management options"
source "kernel/power/Kconfig"
config ARCH_SUSPEND_POSSIBLE
depends on !ARCH_S5PC100 && !ARCH_TEGRA
depends on !ARCH_S5PC100
depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
def_bool y
......
......@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/sizes.h>
#include <mach/hardware.h>
......
......@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/sizes.h>
#include <mach/hardware.h>
......
......@@ -21,7 +21,6 @@
#include <linux/mtd/partitions.h>
#include <mach/hardware.h>
#include <mach/ts72xx.h>
#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
......@@ -29,30 +28,31 @@
#include <asm/mach/arch.h>
#include "soc.h"
#include "ts72xx.h"
static struct map_desc ts72xx_io_desc[] __initdata = {
{
.virtual = TS72XX_MODEL_VIRT_BASE,
.virtual = (unsigned long)TS72XX_MODEL_VIRT_BASE,
.pfn = __phys_to_pfn(TS72XX_MODEL_PHYS_BASE),
.length = TS72XX_MODEL_SIZE,
.type = MT_DEVICE,
}, {
.virtual = TS72XX_OPTIONS_VIRT_BASE,
.virtual = (unsigned long)TS72XX_OPTIONS_VIRT_BASE,
.pfn = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE),
.length = TS72XX_OPTIONS_SIZE,
.type = MT_DEVICE,
}, {
.virtual = TS72XX_OPTIONS2_VIRT_BASE,
.virtual = (unsigned long)TS72XX_OPTIONS2_VIRT_BASE,
.pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE),
.length = TS72XX_OPTIONS2_SIZE,
.type = MT_DEVICE,
}, {
.virtual = TS72XX_RTC_INDEX_VIRT_BASE,
.virtual = (unsigned long)TS72XX_RTC_INDEX_VIRT_BASE,
.pfn = __phys_to_pfn(TS72XX_RTC_INDEX_PHYS_BASE),
.length = TS72XX_RTC_INDEX_SIZE,
.type = MT_DEVICE,
}, {
.virtual = TS72XX_RTC_DATA_VIRT_BASE,
.virtual = (unsigned long)TS72XX_RTC_DATA_VIRT_BASE,
.pfn = __phys_to_pfn(TS72XX_RTC_DATA_PHYS_BASE),
.length = TS72XX_RTC_DATA_SIZE,
.type = MT_DEVICE,
......
......@@ -14,7 +14,7 @@
*/
#define TS72XX_MODEL_PHYS_BASE 0x22000000
#define TS72XX_MODEL_VIRT_BASE 0xfebff000
#define TS72XX_MODEL_VIRT_BASE IOMEM(0xfebff000)
#define TS72XX_MODEL_SIZE 0x00001000
#define TS72XX_MODEL_TS7200 0x00
......@@ -26,7 +26,7 @@
#define TS72XX_OPTIONS_PHYS_BASE 0x22400000
#define TS72XX_OPTIONS_VIRT_BASE 0xfebfe000
#define TS72XX_OPTIONS_VIRT_BASE IOMEM(0xfebfe000)
#define TS72XX_OPTIONS_SIZE 0x00001000
#define TS72XX_OPTIONS_COM2_RS485 0x02
......@@ -34,18 +34,18 @@
#define TS72XX_OPTIONS2_PHYS_BASE 0x22800000
#define TS72XX_OPTIONS2_VIRT_BASE 0xfebfd000
#define TS72XX_OPTIONS2_VIRT_BASE IOMEM(0xfebfd000)
#define TS72XX_OPTIONS2_SIZE 0x00001000
#define TS72XX_OPTIONS2_TS9420 0x04
#define TS72XX_OPTIONS2_TS9420_BOOT 0x02
#define TS72XX_RTC_INDEX_VIRT_BASE 0xfebf9000
#define TS72XX_RTC_INDEX_VIRT_BASE IOMEM(0xfebf9000)
#define TS72XX_RTC_INDEX_PHYS_BASE 0x10800000
#define TS72XX_RTC_INDEX_SIZE 0x00001000
#define TS72XX_RTC_DATA_VIRT_BASE 0xfebf8000
#define TS72XX_RTC_DATA_VIRT_BASE IOMEM(0xfebf8000)
#define TS72XX_RTC_DATA_PHYS_BASE 0x11700000
#define TS72XX_RTC_DATA_SIZE 0x00001000
......
......@@ -89,7 +89,7 @@
#define EXYNOS4_PA_L2CC 0x10502000
#define EXYNOS4_PA_MDMA0 0x10810000
#define EXYNOS4_PA_MDMA1 0x12840000
#define EXYNOS4_PA_MDMA1 0x12850000
#define EXYNOS4_PA_PDMA0 0x12680000
#define EXYNOS4_PA_PDMA1 0x12690000
#define EXYNOS5_PA_MDMA0 0x10800000
......
......@@ -58,7 +58,7 @@ static inline void platform_set_sysmmu(
#endif
#else /* !CONFIG_EXYNOS_DEV_SYSMMU */
#define platform_set_sysmmu(dev, sysmmu) do { } while (0)
#define platform_set_sysmmu(sysmmu, dev) do { } while (0)
#endif
#define SYSMMU_CLOCK_DEVNAME(ipname, id) (SYSMMU_DEVNAME_BASE "." #id)
......
......@@ -93,11 +93,6 @@ static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
static void __init msm8x60_dt_init(void)
{
if (of_machine_is_compatible("qcom,msm8660-surf")) {
printk(KERN_INFO "Init surf UART registers\n");
msm8x60_init_uart12dm();
}
of_platform_populate(NULL, of_default_bus_match_table,
msm_auxdata_lookup, NULL);
}
......
......@@ -46,7 +46,7 @@
#define MSM8960_TMR0_SIZE SZ_4K
#ifdef CONFIG_DEBUG_MSM8960_UART
#define MSM_DEBUG_UART_BASE 0xE1040000
#define MSM_DEBUG_UART_BASE 0xF0040000
#define MSM_DEBUG_UART_PHYS 0x16440000
#endif
......
......@@ -63,7 +63,7 @@
#define MSM8X60_TMR0_SIZE SZ_4K
#ifdef CONFIG_DEBUG_MSM8660_UART
#define MSM_DEBUG_UART_BASE 0xE1040000
#define MSM_DEBUG_UART_BASE 0xF0040000
#define MSM_DEBUG_UART_PHYS 0x19C40000
#endif
......
......@@ -29,30 +29,31 @@
#include <mach/board.h>
#define MSM_CHIP_DEVICE(name, chip) { \
#define MSM_CHIP_DEVICE_TYPE(name, chip, mem_type) { \
.virtual = (unsigned long) MSM_##name##_BASE, \
.pfn = __phys_to_pfn(chip##_##name##_PHYS), \
.length = chip##_##name##_SIZE, \
.type = MT_DEVICE_NONSHARED, \
.type = mem_type, \
}
#define MSM_DEVICE_TYPE(name, mem_type) \
MSM_CHIP_DEVICE_TYPE(name, MSM, mem_type)
#define MSM_CHIP_DEVICE(name, chip) \
MSM_CHIP_DEVICE_TYPE(name, chip, MT_DEVICE)
#define MSM_DEVICE(name) MSM_CHIP_DEVICE(name, MSM)
#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X27) \
|| defined(CONFIG_ARCH_MSM7X25)
static struct map_desc msm_io_desc[] __initdata = {
MSM_DEVICE(VIC),
MSM_CHIP_DEVICE(CSR, MSM7X00),
MSM_DEVICE(DMOV),
MSM_CHIP_DEVICE(GPIO1, MSM7X00),
MSM_CHIP_DEVICE(GPIO2, MSM7X00),
MSM_DEVICE(CLK_CTL),
MSM_DEVICE_TYPE(VIC, MT_DEVICE_NONSHARED),
MSM_CHIP_DEVICE_TYPE(CSR, MSM7X00, MT_DEVICE_NONSHARED),
MSM_DEVICE_TYPE(DMOV, MT_DEVICE_NONSHARED),
MSM_CHIP_DEVICE_TYPE(GPIO1, MSM7X00, MT_DEVICE_NONSHARED),
MSM_CHIP_DEVICE_TYPE(GPIO2, MSM7X00, MT_DEVICE_NONSHARED),
MSM_DEVICE_TYPE(CLK_CTL, MT_DEVICE_NONSHARED),
#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
defined(CONFIG_DEBUG_MSM_UART3)
MSM_DEVICE(DEBUG_UART),
#endif
#ifdef CONFIG_ARCH_MSM7X30
MSM_DEVICE(GCC),
MSM_DEVICE_TYPE(DEBUG_UART, MT_DEVICE_NONSHARED),
#endif
{
.virtual = (unsigned long) MSM_SHARED_RAM_BASE,
......
......@@ -112,8 +112,7 @@ static struct mtd_partition nhk8815_partitions[] = {
static struct nomadik_nand_platform_data nhk8815_nand_data = {
.parts = nhk8815_partitions,
.nparts = ARRAY_SIZE(nhk8815_partitions),
.options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING \
| NAND_NO_READRDY,
.options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING,
.init = nhk8815_nand_init,
};
......
......@@ -60,6 +60,7 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
if (!pdata->regs) {
pr_err("gpio%d: Memory allocation failed\n", id);
kfree(pdata);
return -ENOMEM;
}
......@@ -121,6 +122,7 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
break;
default:
WARN(1, "Invalid gpio bank_type\n");
kfree(pdata->regs);
kfree(pdata);
return -EINVAL;
}
......
......@@ -229,13 +229,7 @@ static inline void omap4_irq_save_context(void)
/* Save AuxBoot* registers */
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
/* Save SyncReq generation logic */
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_1);
__raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
/* Save SyncReq generation logic */
......
......@@ -380,7 +380,7 @@ int h1940_led_blink_set(unsigned gpio, int state,
default:
blink_gpio = S3C2410_GPA(3);
check_gpio1 = S3C2410_GPA(1);
check_gpio1 = S3C2410_GPA(7);
check_gpio2 = S3C2410_GPA(7);
break;
}
......@@ -460,7 +460,7 @@ static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
break;
default:
break;
};
}
}
static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
......
......@@ -199,7 +199,9 @@ int __init tegra_powergate_init(void)
#ifdef CONFIG_DEBUG_FS
static const char * const powergate_name[] = {
static const char * const *powergate_name;
static const char * const powergate_name_t20[] = {
[TEGRA_POWERGATE_CPU] = "cpu",
[TEGRA_POWERGATE_3D] = "3d",
[TEGRA_POWERGATE_VENC] = "venc",
......@@ -209,6 +211,23 @@ static const char * const powergate_name[] = {
[TEGRA_POWERGATE_MPE] = "mpe",
};
static const char * const powergate_name_t30[] = {
[TEGRA_POWERGATE_CPU] = "cpu0",
[TEGRA_POWERGATE_3D] = "3d0",
[TEGRA_POWERGATE_VENC] = "venc",
[TEGRA_POWERGATE_VDEC] = "vdec",
[TEGRA_POWERGATE_PCIE] = "pcie",
[TEGRA_POWERGATE_L2] = "l2",
[TEGRA_POWERGATE_MPE] = "mpe",
[TEGRA_POWERGATE_HEG] = "heg",
[TEGRA_POWERGATE_SATA] = "sata",
[TEGRA_POWERGATE_CPU1] = "cpu1",
[TEGRA_POWERGATE_CPU2] = "cpu2",
[TEGRA_POWERGATE_CPU3] = "cpu3",
[TEGRA_POWERGATE_CELP] = "celp",
[TEGRA_POWERGATE_3D1] = "3d1",
};
static int powergate_show(struct seq_file *s, void *data)
{
int i;
......@@ -237,14 +256,24 @@ static const struct file_operations powergate_fops = {
int __init tegra_powergate_debugfs_init(void)
{
struct dentry *d;
int err = -ENOMEM;
d = debugfs_create_file("powergate", S_IRUGO, NULL, NULL,
&powergate_fops);
if (!d)
return -ENOMEM;
switch (tegra_chip_id) {
case TEGRA20:
powergate_name = powergate_name_t20;
break;
case TEGRA30:
powergate_name = powergate_name_t30;
break;
}
if (powergate_name) {
d = debugfs_create_file("powergate", S_IRUGO, NULL, NULL,
&powergate_fops);
if (!d)
return -ENOMEM;
}
return err;
return 0;
}
#endif
......@@ -29,6 +29,7 @@ config MACH_MOP500
select I2C
select I2C_NOMADIK
select SOC_BUS
select REGULATOR_FIXED_VOLTAGE
help
Include support for the MOP500 development platform.
......
......@@ -13,6 +13,21 @@
#include <linux/regulator/ab8500.h>
#include "board-mop500-regulators.h"
static struct regulator_consumer_supply gpio_en_3v3_consumers[] = {
REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
};
struct regulator_init_data gpio_en_3v3_regulator = {
.constraints = {
.name = "EN-3V3",
.min_uV = 3300000,
.max_uV = 3300000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(gpio_en_3v3_consumers),
.consumer_supplies = gpio_en_3v3_consumers,
};
/*
* TPS61052 regulator
*/
......
......@@ -18,5 +18,6 @@ extern struct ab8500_regulator_reg_init
ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS];
extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS];
extern struct regulator_init_data tps61052_regulator;
extern struct regulator_init_data gpio_en_3v3_regulator;
#endif
......@@ -23,6 +23,7 @@
#include <linux/spi/spi.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/regulator/ab8500.h>
#include <linux/regulator/fixed.h>
#include <linux/mfd/tc3589x.h>
#include <linux/mfd/tps6105x.h>
#include <linux/mfd/abx500/ab8500-gpio.h>
......@@ -76,6 +77,23 @@ static struct platform_device snowball_led_dev = {
},
};
static struct fixed_voltage_config snowball_gpio_en_3v3_data = {
.supply_name = "EN-3V3",
.gpio = SNOWBALL_EN_3V3_ETH_GPIO,
.microvolts = 3300000,
.enable_high = 1,
.init_data = &gpio_en_3v3_regulator,
.startup_delay = 5000, /* 1200us */
};
static struct platform_device snowball_gpio_en_3v3_regulator_dev = {
.name = "reg-fixed-voltage",
.id = 1,
.dev = {
.platform_data = &snowball_gpio_en_3v3_data,
},
};
static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
.gpio_base = MOP500_AB8500_PIN_GPIO(1),
.irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE,
......@@ -565,6 +583,7 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
&snowball_led_dev,
&snowball_key_dev,
&snowball_sbnet_dev,
&snowball_gpio_en_3v3_regulator_dev,
};
static void __init mop500_init_machine(void)
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment