Commit 44e58a6a authored by Martin Schitter's avatar Martin Schitter Committed by Linus Torvalds

[PATCH] parport: NetMos nm9855 fix

kernel 2.6.12-rc2 adopted some code by Bjorn Helgaas supporting NetMos combo
controller cards. this implementation doesn't work for nm9855 based cards!

there are two reasons:

a) the module 'parport_pc' doesn't want to give the resonsibility for
   the netmos_9855 to 'parport_serial' and can not handle the serial lines
   -- trivial to fix...

   http://lists.infradead.org/pipermail/linux-parport/2005-February/000250.html
   http://lkml.org/lkml/2005/3/24/199 b) the support for the nm9855 in

   'parport_serial' still doesn't work because of wrong assumptions about
   the relevant BARs port address layout for this chip:

	 0000:00:09.0 Communication controller:
         	      NetMos Technology PCI 9855
         	      Multi-I/O Controller (rev 01)
	 	      (= 9710:9855)
         Subsystem: LSI Logic / Symbios Logic 1P4S (= 1000:0014)
  	 Flags: medium devsel, IRQ 177
	 I/O ports at a800 [size=8]  (= parport)
	 I/O ports at a400 [size=8]
	 I/O ports at a000 [size=8]  (= serial)
	 I/O ports at 9800 [size=8]  (= serial)
	 I/O ports at 9400 [size=8]  (= serial)
	 I/O ports at 9000 [size=16] (= serial)

the following patch will fix the problem.

Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 328007b7
......@@ -2751,7 +2751,6 @@ enum parport_pc_pci_cards {
netmos_9755,
netmos_9805,
netmos_9815,
netmos_9855,
};
......@@ -2826,7 +2825,6 @@ static struct parport_pc_pci {
/* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */
/* netmos_9805 */ { 1, { { 0, -1 }, } }, /* untested */
/* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } }, /* untested */
/* netmos_9855 */ { 2, { { 0, -1 }, { 2, -1 }, } }, /* untested */
};
static struct pci_device_id parport_pc_pci_tbl[] = {
......@@ -2907,8 +2905,6 @@ static struct pci_device_id parport_pc_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9805 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9815,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 },
{ 0, } /* terminate list */
};
MODULE_DEVICE_TABLE(pci,parport_pc_pci_tbl);
......
......@@ -34,6 +34,7 @@ enum parport_pc_pci_cards {
titan_110l = 0,
titan_210l,
netmos_9xx5_combo,
netmos_9855,
avlab_1s1p,
avlab_1s1p_650,
avlab_1s1p_850,
......@@ -87,6 +88,7 @@ static struct parport_pc_pci cards[] __devinitdata = {
/* titan_110l */ { 1, { { 3, -1 }, } },
/* titan_210l */ { 1, { { 3, -1 }, } },
/* netmos_9xx5_combo */ { 1, { { 2, -1 }, }, netmos_parallel_init },
/* netmos_9855 */ { 1, { { 0, -1 }, }, netmos_parallel_init },
/* avlab_1s1p */ { 1, { { 1, 2}, } },
/* avlab_1s1p_650 */ { 1, { { 1, 2}, } },
/* avlab_1s1p_850 */ { 1, { { 1, 2}, } },
......@@ -120,7 +122,7 @@ static struct pci_device_id parport_serial_pci_tbl[] = {
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9845,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 },
/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
{ 0x14db, 0x2110, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p},
{ 0x14db, 0x2111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p_650},
......@@ -207,6 +209,7 @@ static struct pci_board_no_ids pci_boards[] __devinitdata = {
/* titan_110l */ { SPCI_FL_BASE1 | SPCI_FL_BASE_TABLE, 1, 921600 },
/* titan_210l */ { SPCI_FL_BASE1 | SPCI_FL_BASE_TABLE, 2, 921600 },
/* netmos_9xx5_combo */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200, 0, 0, netmos_serial_init },
/* netmos_9855 */ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 1, 115200, 0, 0, netmos_serial_init },
/* avlab_1s1p (n/t) */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
/* avlab_1s1p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
/* avlab_1s1p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment