Commit 44d84d72 authored by David S. Miller's avatar David S. Miller
Browse files
parents de7b5b3d bdec4196
......@@ -10,12 +10,13 @@ Optional properties:
Each button (key) is represented as a sub-node of "gpio-keys":
Subnode properties:
- gpios: OF device-tree gpio specification.
- interrupts: the interrupt line for that input.
- label: Descriptive name of the key.
- linux,code: Keycode to emit.
Required mutual exclusive subnode-properties:
- gpios: OF device-tree gpio specification.
- interrupts: the interrupt line for that input
Note that either "interrupts" or "gpios" properties can be omitted, but not
both at the same time. Specifying both properties is allowed.
Optional subnode-properties:
- linux,input-type: Specify event type this button/key generates.
......@@ -23,6 +24,9 @@ Optional subnode-properties:
- debounce-interval: Debouncing interval time in milliseconds.
If not specified defaults to 5.
- gpio-key,wakeup: Boolean, button can wake-up the system.
- linux,can-disable: Boolean, indicates that button is connected
to dedicated (not shared) interrupt which can be disabled to
suppress events from the button.
Example nodes:
......
......@@ -8,6 +8,8 @@ Optional properties:
- debounce-interval : Debouncing interval time in milliseconds
- st,scan-count : Scanning cycles elapsed before key data is updated
- st,no-autorepeat : If specified device will not autorepeat
- keypad,num-rows : See ./matrix-keymap.txt
- keypad,num-columns : See ./matrix-keymap.txt
Example:
......
VERSION = 3
PATCHLEVEL = 19
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc3
NAME = Diseased Newt
# *DOCUMENTATION*
......
......@@ -203,27 +203,3 @@
compatible = "linux,spdif-dir";
};
};
&pinctrl {
/*
* These pins might be muxed as I2S by
* the bootloader, but it conflicts
* with the real I2S pins that are
* muxed using i2s_pins. We must mux
* those pins to a function other than
* I2S.
*/
pinctrl-0 = <&hog_pins1 &hog_pins2>;
pinctrl-names = "default";
hog_pins1: hog-pins1 {
marvell,pins = "mpp6", "mpp8", "mpp10",
"mpp12", "mpp13";
marvell,function = "gpio";
};
hog_pins2: hog-pins2 {
marvell,pins = "mpp5", "mpp7", "mpp9";
marvell,function = "gpo";
};
};
......@@ -338,6 +338,7 @@ CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_MVEBU=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_EXYNOS=y
CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_EHCI_HCD_STI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
......
......@@ -1046,6 +1046,15 @@ static int c_show(struct seq_file *m, void *v)
seq_printf(m, "model name\t: %s rev %d (%s)\n",
cpu_name, cpuid & 15, elf_platform);
#if defined(CONFIG_SMP)
seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
per_cpu(cpu_data, i).loops_per_jiffy / (500000UL/HZ),
(per_cpu(cpu_data, i).loops_per_jiffy / (5000UL/HZ)) % 100);
#else
seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
loops_per_jiffy / (500000/HZ),
(loops_per_jiffy / (5000/HZ)) % 100);
#endif
/* dump out the processor features */
seq_puts(m, "Features\t: ");
......
......@@ -387,6 +387,18 @@ asmlinkage void secondary_start_kernel(void)
void __init smp_cpus_done(unsigned int max_cpus)
{
int cpu;
unsigned long bogosum = 0;
for_each_online_cpu(cpu)
bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy;
printk(KERN_INFO "SMP: Total of %d processors activated "
"(%lu.%02lu BogoMIPS).\n",
num_online_cpus(),
bogosum / (500000/HZ),
(bogosum / (5000/HZ)) % 100);
hyp_mode_check();
}
......
......@@ -11,7 +11,7 @@
#define NR_syscalls 318 /* length of syscall table */
#define NR_syscalls 319 /* length of syscall table */
/*
* The following defines stop scripts/checksyscalls.sh from complaining about
......
......@@ -331,5 +331,6 @@
#define __NR_getrandom 1339
#define __NR_memfd_create 1340
#define __NR_bpf 1341
#define __NR_execveat 1342
#endif /* _UAPI_ASM_IA64_UNISTD_H */
......@@ -1779,6 +1779,7 @@ sys_call_table:
data8 sys_getrandom
data8 sys_memfd_create // 1340
data8 sys_bpf
data8 sys_execveat
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
......@@ -72,6 +72,7 @@ void __init setup_cpuinfo(void)
cpuinfo.has_div = fcpu_has(cpu, "altr,has-div");
cpuinfo.has_mul = fcpu_has(cpu, "altr,has-mul");
cpuinfo.has_mulx = fcpu_has(cpu, "altr,has-mulx");
cpuinfo.mmu = fcpu_has(cpu, "altr,has-mmu");
if (IS_ENABLED(CONFIG_NIOS2_HW_DIV_SUPPORT) && !cpuinfo.has_div)
err_cpu("DIV");
......
......@@ -365,30 +365,14 @@ ENTRY(ret_from_interrupt)
GET_THREAD_INFO r1
ldw r4, TI_PREEMPT_COUNT(r1)
bne r4, r0, restore_all
need_resched:
ldw r4, TI_FLAGS(r1) /* ? Need resched set */
BTBZ r10, r4, TIF_NEED_RESCHED, restore_all
ldw r4, PT_ESTATUS(sp) /* ? Interrupts off */
andi r10, r4, ESTATUS_EPIE
beq r10, r0, restore_all
movia r4, PREEMPT_ACTIVE
stw r4, TI_PREEMPT_COUNT(r1)
rdctl r10, status /* enable intrs again */
ori r10, r10 ,STATUS_PIE
wrctl status, r10
PUSH r1
call schedule
POP r1
mov r4, r0
stw r4, TI_PREEMPT_COUNT(r1)
rdctl r10, status /* disable intrs */
andi r10, r10, %lo(~STATUS_PIE)
wrctl status, r10
br need_resched
#else
br restore_all
call preempt_schedule_irq
#endif
br restore_all
/***********************************************************************
* A few syscall wrappers
......
......@@ -86,6 +86,11 @@ extern int overlaps_crashkernel(unsigned long start, unsigned long size);
extern void reserve_crashkernel(void);
extern void machine_kexec_mask_interrupts(void);
static inline bool kdump_in_progress(void)
{
return crashing_cpu >= 0;
}
#else /* !CONFIG_KEXEC */
static inline void crash_kexec_secondary(struct pt_regs *regs) { }
......@@ -106,6 +111,11 @@ static inline int crash_shutdown_unregister(crash_shutdown_t handler)
return 0;
}
static inline bool kdump_in_progress(void)
{
return false;
}
#endif /* CONFIG_KEXEC */
#endif /* ! __ASSEMBLY__ */
#endif /* __KERNEL__ */
......
......@@ -366,3 +366,4 @@ SYSCALL_SPU(seccomp)
SYSCALL_SPU(getrandom)
SYSCALL_SPU(memfd_create)
SYSCALL_SPU(bpf)
COMPAT_SYS(execveat)
......@@ -12,7 +12,7 @@
#include <uapi/asm/unistd.h>
#define __NR_syscalls 362
#define __NR_syscalls 363
#define __NR__exit __NR_exit
#define NR_syscalls __NR_syscalls
......
......@@ -384,5 +384,6 @@
#define __NR_getrandom 359
#define __NR_memfd_create 360
#define __NR_bpf 361
#define __NR_execveat 362
#endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */
......@@ -330,7 +330,7 @@ void default_machine_kexec(struct kimage *image)
* using debugger IPI.
*/
if (crashing_cpu == -1)
if (!kdump_in_progress())
kexec_prepare_cpus();
pr_debug("kexec: Starting switchover sequence.\n");
......
......@@ -700,6 +700,7 @@ void start_secondary(void *unused)
smp_store_cpu_info(cpu);
set_dec(tb_ticks_per_jiffy);
preempt_disable();
cpu_callin_map[cpu] = 1;
if (smp_ops->setup_cpu)
smp_ops->setup_cpu(cpu);
......@@ -738,14 +739,6 @@ void start_secondary(void *unused)
notify_cpu_starting(cpu);
set_cpu_online(cpu, true);
/*
* CPU must be marked active and online before we signal back to the
* master, because the scheduler needs to see the cpu_online and
* cpu_active bits set.
*/
smp_wmb();
cpu_callin_map[cpu] = 1;
local_irq_enable();
cpu_startup_entry(CPUHP_ONLINE);
......
......@@ -43,6 +43,7 @@
#include <asm/trace.h>
#include <asm/firmware.h>
#include <asm/plpar_wrappers.h>
#include <asm/kexec.h>
#include <asm/fadump.h>
#include "pseries.h"
......@@ -267,8 +268,13 @@ static void pSeries_lpar_hptab_clear(void)
* out to the user, but at least this will stop us from
* continuing on further and creating an even more
* difficult to debug situation.
*
* There is a known problem when kdump'ing, if cpus are offline
* the above call will fail. Rather than panicking again, keep
* going and hope the kdump kernel is also little endian, which
* it usually is.
*/
if (rc)
if (rc && !kdump_in_progress())
panic("Could not enable big endian exceptions");
}
#endif
......
......@@ -3,6 +3,7 @@ config UML
default y
select HAVE_ARCH_AUDITSYSCALL
select HAVE_UID16
select HAVE_FUTEX_CMPXCHG if FUTEX
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES
select GENERIC_IO
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment