Commit 422d9abf authored by Olof Johansson's avatar Olof Johansson
Browse files

Merge tag 'mvebu-fixes-3.17' of git://git.infradead.org/linux-mvebu into next/fixes-non-critical

Merge "mvebu fixes for v3.17" from Jason Cooper:

 - kirkwood
    - final driver cleanup of ARCH_KIRKWOOD removal
    - fix DT based DSA

 - mvebu
    - use BCH ECC for the RN2120 and RN104/2 nand chips

* tag 'mvebu-fixes-3.17' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: Netgear RN102: Use Hardware BCH ECC
  ARM: Kirkwood: Fix DT based DSA.
  ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC
  ARM: mvebu: Netgear RN104: Use Hardware BCH ECC
  cpufreq: Remove ARCH_KIRKWOOD dependency
  watchdog: Remove ARCH_KIRKWOOD dependency
  rtc: Remove ARCH_KIRKWOOD dependency
  leds: Remove ARCH_KIRKWOOD dependency
  thermal: Remove ARCH_KIRKWOOD dependency
  ata: Remove ARCH_KIRKWOOD dependency
  cpuidle: kirkwood: Remove ARCH_KIRKWOOD dependency
parents 2fee8c1d ace85781
......@@ -144,8 +144,8 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
kirkwood-openrd-client.dtb \
kirkwood-openrd-ultimate.dtb \
kirkwood-rd88f6192.dtb \
kirkwood-rd88f6281-a0.dtb \
kirkwood-rd88f6281-a1.dtb \
kirkwood-rd88f6281-z0.dtb \
kirkwood-rd88f6281-a.dtb \
kirkwood-rs212.dtb \
kirkwood-rs409.dtb \
kirkwood-rs411.dtb \
......
......@@ -143,6 +143,10 @@
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
/* Use Hardware BCH ECC */
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
partition@0 {
label = "u-boot";
reg = <0x0000000 0x180000>; /* 1.5MB */
......
......@@ -145,6 +145,10 @@
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
/* Use Hardware BCH ECC */
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
partition@0 {
label = "u-boot";
reg = <0x0000000 0x180000>; /* 1.5MB */
......
......@@ -223,6 +223,10 @@
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
/* Use Hardware BCH ECC */
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
partition@0 {
label = "u-boot";
reg = <0x0000000 0x180000>; /* 1.5MB */
......
......@@ -123,11 +123,11 @@
dsa@0 {
compatible = "marvell,dsa";
#address-cells = <2>;
#address-cells = <1>;
#size-cells = <0>;
dsa,ethernet = <&eth0>;
dsa,mii-bus = <&ethphy0>;
dsa,ethernet = <&eth0port>;
dsa,mii-bus = <&mdio>;
switch@0 {
#address-cells = <1>;
......@@ -169,17 +169,13 @@
&mdio {
status = "okay";
ethphy0: ethernet-phy@ff {
reg = <0xff>; /* No phy attached */
speed = <1000>;
duplex = <1>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
speed = <1000>;
duplex = <1>;
};
};
/*
* Marvell RD88F6181 A0 Board descrition
* Marvell RD88F6181 A Board descrition
*
* Andrew Lunn <andrew@lunn.ch>
*
......@@ -7,20 +7,37 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
* This file contains the definitions for the board with the A0 variant of
* the SoC. The ethernet switch does not have a "wan" port.
* This file contains the definitions for the board with the A0 or
* higher stepping of the SoC. The ethernet switch does not have a
* "wan" port.
*/
/dts-v1/;
#include "kirkwood-rd88f6281.dtsi"
/ {
model = "Marvell RD88f6281 Reference design, with A0 SoC";
compatible = "marvell,rd88f6281-a0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
model = "Marvell RD88f6281 Reference design, with A0 or higher SoC";
compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
dsa@0 {
switch@0 {
reg = <10 0>; /* MDIO address 10, switch 0 in tree */
reg = <10 0>; /* MDIO address 10, switch 0 in tree */
};
};
};
\ No newline at end of file
};
&mdio {
status = "okay";
ethphy1: ethernet-phy@11 {
reg = <11>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};
/*
* Marvell RD88F6181 A1 Board descrition
* Marvell RD88F6181 Z0 stepping descrition
*
* Andrew Lunn <andrew@lunn.ch>
*
......@@ -7,17 +7,17 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
* This file contains the definitions for the board with the A1 variant of
* the SoC. The ethernet switch has a "wan" port.
*/
* This file contains the definitions for the board using the Z0
* stepping of the SoC. The ethernet switch has a "wan" port.
*/
/dts-v1/;
#include "kirkwood-rd88f6281.dtsi"
/ {
model = "Marvell RD88f6281 Reference design, with A1 SoC";
compatible = "marvell,rd88f6281-a1", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
model = "Marvell RD88f6281 Reference design, with Z0 SoC";
compatible = "marvell,rd88f6281-z0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
dsa@0 {
switch@0 {
......@@ -28,4 +28,8 @@
};
};
};
};
\ No newline at end of file
};
&eth1 {
status = "disabled";
};
......@@ -37,7 +37,6 @@
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pinctrl-0 = <&pmx_sdio_cd>;
pinctrl-names = "default";
pmx_sdio_cd: pmx-sdio-cd {
......@@ -69,8 +68,8 @@
#address-cells = <2>;
#size-cells = <0>;
dsa,ethernet = <&eth0>;
dsa,mii-bus = <&ethphy1>;
dsa,ethernet = <&eth0port>;
dsa,mii-bus = <&mdio>;
switch@0 {
#address-cells = <1>;
......@@ -119,35 +118,19 @@
};
partition@300000 {
label = "data";
label = "rootfs";
reg = <0x0300000 0x500000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
ethphy1: ethernet-phy@ff {
reg = <0xff>; /* No PHY attached */
speed = <1000>;
duple = <1>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
speed = <1000>;
duplex = <1>;
};
};
......@@ -309,7 +309,7 @@
marvell,tx-checksum-limit = <1600>;
status = "disabled";
ethernet0-port@0 {
eth0port: ethernet0-port@0 {
compatible = "marvell,kirkwood-eth-port";
reg = <0>;
interrupts = <11>;
......@@ -342,7 +342,7 @@
pinctrl-names = "default";
status = "disabled";
ethernet1-port@0 {
eth1port: ethernet1-port@0 {
compatible = "marvell,kirkwood-eth-port";
reg = <0>;
interrupts = <15>;
......
......@@ -299,7 +299,7 @@ config SATA_HIGHBANK
config SATA_MV
tristate "Marvell SATA support"
depends on PCI || ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
select GENERIC_PHY
help
......
......@@ -119,7 +119,7 @@ config ARM_INTEGRATOR
If in doubt, say Y.
config ARM_KIRKWOOD_CPUFREQ
def_bool ARCH_KIRKWOOD || MACH_KIRKWOOD
def_bool MACH_KIRKWOOD
help
This adds the CPUFreq driver for Marvell Kirkwood
SoCs.
......
......@@ -28,7 +28,7 @@ config ARM_HIGHBANK_CPUIDLE
config ARM_KIRKWOOD_CPUIDLE
bool "CPU Idle Driver for Marvell Kirkwood SoCs"
depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
depends on MACH_KIRKWOOD
help
This adds the CPU Idle driver for Marvell Kirkwood SoCs.
......
......@@ -410,7 +410,7 @@ config LEDS_MC13783
config LEDS_NS2
tristate "LED support for Network Space v2 GPIO LEDs"
depends on LEDS_CLASS
depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
depends on MACH_KIRKWOOD
default y
help
This option enable support for the dual-GPIO LED found on the
......@@ -420,7 +420,7 @@ config LEDS_NS2
config LEDS_NETXBIG
tristate "LED support for Big Network series LEDs"
depends on LEDS_CLASS
depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
depends on MACH_KIRKWOOD
default y
help
This option enable support for LEDs found on the LaCie 2Big
......
......@@ -1198,7 +1198,7 @@ config RTC_DRV_TX4939
config RTC_DRV_MV
tristate "Marvell SoC RTC"
depends on ARCH_KIRKWOOD || ARCH_DOVE || ARCH_MVEBU
depends on ARCH_DOVE || ARCH_MVEBU
help
If you say yes here you will get support for the in-chip RTC
that can be found in some of Marvell's SoC devices, such as
......
......@@ -143,7 +143,7 @@ config RCAR_THERMAL
config KIRKWOOD_THERMAL
tristate "Temperature sensor on Marvell Kirkwood SoCs"
depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
depends on MACH_KIRKWOOD
depends on OF
help
Support for the Kirkwood thermal sensor driver into the Linux thermal
......
......@@ -301,7 +301,7 @@ config DAVINCI_WATCHDOG
config ORION_WATCHDOG
tristate "Orion watchdog"
depends on ARCH_ORION5X || ARCH_KIRKWOOD || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU
depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU
select WATCHDOG_CORE
help
Say Y here if to include support for the watchdog timer
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment