Commit 421bf82e authored by Valentin Longchamp's avatar Valentin Longchamp Committed by Sascha Hauer
Browse files

mx31moboard: serial port fix



We get rid of CTS/RTS lines on uart0 on our platform.
This is the port we use as main kernel console. We do not
want it to be blocking because of CTS/RTS signals, not allowing
the system to boot or print messages.

However we often use it with a bluetooth module needing CTS/RTS
lines as backup login in case of trouble. To be able to use it,
we assert CTS low so that the module can always send chars.
Signed-off-by: default avatarValentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
parent 8963c49f
......@@ -45,8 +45,8 @@
static unsigned int moboard_pins[] = {
/* UART0 */
MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
MX31_PIN_CTS1__GPIO2_7,
/* UART4 */
MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
......@@ -101,7 +101,18 @@ static struct platform_device mx31moboard_flash = {
.num_resources = 1,
};
static struct imxuart_platform_data uart_pdata = {
static int moboard_uart0_init(struct platform_device *pdev)
{
gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
return 0;
}
static struct imxuart_platform_data uart0_pdata = {
.init = moboard_uart0_init,
};
static struct imxuart_platform_data uart4_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
......@@ -284,8 +295,9 @@ static void __init mxc_board_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_uart_device4, &uart_pdata);
mxc_register_device(&mxc_uart_device0, &uart0_pdata);
mxc_register_device(&mxc_uart_device4, &uart4_pdata);
mx31moboard_init_sel_gpios();
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment