Commit 4188bba0 authored by Al Cooper's avatar Al Cooper Committed by Chris Ball

mmc: Prevent 1.8V switch for SD hosts that don't support UHS modes.

The driver should not try to switch to 1.8V when the SD 3.0 host
controller does not have any UHS capabilities bits set (SDR50, DDR50
or SDR104). See page 72 of "SD Specifications Part A2 SD Host
Controller Simplified Specification Version 3.00" under
"1.8V Signaling Enable". Instead of setting SDR12 and SDR25 in the host
capabilities data structure for all V3.0 host controllers, only set them
if SDR104, SDR50 or DDR50 is set in the host capabilities register. This
will prevent the switch to 1.8V later.
Signed-off-by: default avatarAl Cooper <>
Acked-by: default avatarArindam Nath <>
Acked-by: default avatarPhilip Rakity <>
Acked-by: default avatarGirish K S <>
Signed-off-by: default avatarChris Ball <>
parent 79263f33
......@@ -2782,8 +2782,9 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->caps |= MMC_CAP_NEEDS_POLL;
/* UHS-I mode(s) supported by the host controller. */
if (host->version >= SDHCI_SPEC_300)
/* Any UHS-I mode in caps implies SDR12 and SDR25 support. */
mmc->caps |= MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
/* SDR104 supports also implies SDR50 support */
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment