Commit 41561f28 authored by Vitaly Wool's avatar Vitaly Wool Committed by Jean Delvare

i2c: New Philips PNX bus driver

New I2C bus driver for Philips ARM boards (Philips IP3204 I2C IP
block). This I2C controller can be found on (at least) PNX010x,
PNX52xx and PNX4008 Philips boards.
Signed-off-by: default avatarVitaly Wool <vitalywool@gmail.com>
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
parent 51fd554b
......@@ -2,7 +2,7 @@
# Makefile for the linux kernel.
#
obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o
obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o i2c.o
obj-m :=
obj-n :=
obj- :=
......
/*
* I2C initialization for PNX4008.
*
* Author: Vitaly Wool <vitalywool@gmail.com>
*
* 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/clk.h>
#include <linux/i2c.h>
#include <linux/i2c-pnx.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <asm/arch/platform.h>
#include <asm/arch/i2c.h>
static int set_clock_run(struct platform_device *pdev)
{
struct clk *clk;
char name[10];
int retval = 0;
snprintf(name, 10, "i2c%d_ck", pdev->id);
clk = clk_get(&pdev->dev, name);
if (!IS_ERR(clk)) {
clk_set_rate(clk, 1);
clk_put(clk);
} else
retval = -ENOENT;
return retval;
}
static int set_clock_stop(struct platform_device *pdev)
{
struct clk *clk;
char name[10];
int retval = 0;
snprintf(name, 10, "i2c%d_ck", pdev->id);
clk = clk_get(&pdev->dev, name);
if (!IS_ERR(clk)) {
clk_set_rate(clk, 0);
clk_put(clk);
} else
retval = -ENOENT;
return retval;
}
static int i2c_pnx_suspend(struct platform_device *pdev, pm_message_t state)
{
int retval = 0;
#ifdef CONFIG_PM
retval = set_clock_run(pdev);
#endif
return retval;
}
static int i2c_pnx_resume(struct platform_device *pdev)
{
int retval = 0;
#ifdef CONFIG_PM
retval = set_clock_run(pdev);
#endif
return retval;
}
static u32 calculate_input_freq(struct platform_device *pdev)
{
return HCLK_MHZ;
}
static struct i2c_pnx_algo_data pnx_algo_data0 = {
.base = PNX4008_I2C1_BASE,
.irq = I2C_1_INT,
};
static struct i2c_pnx_algo_data pnx_algo_data1 = {
.base = PNX4008_I2C2_BASE,
.irq = I2C_2_INT,
};
static struct i2c_pnx_algo_data pnx_algo_data2 = {
.base = (PNX4008_USB_CONFIG_BASE + 0x300),
.irq = USB_I2C_INT,
};
static struct i2c_adapter pnx_adapter0 = {
.name = I2C_CHIP_NAME "0",
.algo_data = &pnx_algo_data0,
};
static struct i2c_adapter pnx_adapter1 = {
.name = I2C_CHIP_NAME "1",
.algo_data = &pnx_algo_data1,
};
static struct i2c_adapter pnx_adapter2 = {
.name = "USB-I2C",
.algo_data = &pnx_algo_data2,
};
static struct i2c_pnx_data i2c0_data = {
.suspend = i2c_pnx_suspend,
.resume = i2c_pnx_resume,
.calculate_input_freq = calculate_input_freq,
.set_clock_run = set_clock_run,
.set_clock_stop = set_clock_stop,
.adapter = &pnx_adapter0,
};
static struct i2c_pnx_data i2c1_data = {
.suspend = i2c_pnx_suspend,
.resume = i2c_pnx_resume,
.calculate_input_freq = calculate_input_freq,
.set_clock_run = set_clock_run,
.set_clock_stop = set_clock_stop,
.adapter = &pnx_adapter1,
};
static struct i2c_pnx_data i2c2_data = {
.suspend = i2c_pnx_suspend,
.resume = i2c_pnx_resume,
.calculate_input_freq = calculate_input_freq,
.set_clock_run = set_clock_run,
.set_clock_stop = set_clock_stop,
.adapter = &pnx_adapter2,
};
static struct platform_device i2c0_device = {
.name = "pnx-i2c",
.id = 0,
.dev = {
.platform_data = &i2c0_data,
},
};
static struct platform_device i2c1_device = {
.name = "pnx-i2c",
.id = 1,
.dev = {
.platform_data = &i2c1_data,
},
};
static struct platform_device i2c2_device = {
.name = "pnx-i2c",
.id = 2,
.dev = {
.platform_data = &i2c2_data,
},
};
static struct platform_device *devices[] __initdata = {
&i2c0_device,
&i2c1_device,
&i2c2_device,
};
void __init pnx4008_register_i2c_devices(void)
{
platform_add_devices(devices, ARRAY_SIZE(devices));
}
......@@ -536,4 +536,23 @@ config I2C_MV64XXX
This driver can also be built as a module. If so, the module
will be called i2c-mv64xxx.
config I2C_PNX
tristate "I2C bus support for Philips PNX targets"
depends on ARCH_PNX4008 && I2C
help
This driver supports the Philips IP3204 I2C IP block master and/or
slave controller
This driver can also be built as a module. If so, the module
will be called i2c-pnx.
config I2C_PNX_EARLY
bool "Early initialization for I2C on PNXxxxx"
depends on I2C_PNX=y
help
Under certain circumstances one may need to make sure I2C on PNXxxxx
is initialized earlier than some other driver that depends on it
(for instance, that might be USB in case of PNX4008). With this
option turned on you can guarantee that.
endmenu
......@@ -28,6 +28,7 @@ obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
obj-$(CONFIG_I2C_PROSAVAGE) += i2c-prosavage.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_RPXLITE) += i2c-rpx.o
......
This diff is collapsed.
/*
* PNX4008-specific tweaks for I2C IP3204 block
*
* Author: Vitaly Wool <vwool@ru.mvista.com>
*
* 2005 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef __ASM_ARCH_I2C_H__
#define __ASM_ARCH_I2C_H__
#include <linux/pm.h>
#include <linux/platform_device.h>
enum {
mstatus_tdi = 0x00000001,
mstatus_afi = 0x00000002,
mstatus_nai = 0x00000004,
mstatus_drmi = 0x00000008,
mstatus_active = 0x00000020,
mstatus_scl = 0x00000040,
mstatus_sda = 0x00000080,
mstatus_rff = 0x00000100,
mstatus_rfe = 0x00000200,
mstatus_tff = 0x00000400,
mstatus_tfe = 0x00000800,
};
enum {
mcntrl_tdie = 0x00000001,
mcntrl_afie = 0x00000002,
mcntrl_naie = 0x00000004,
mcntrl_drmie = 0x00000008,
mcntrl_daie = 0x00000020,
mcntrl_rffie = 0x00000040,
mcntrl_tffie = 0x00000080,
mcntrl_reset = 0x00000100,
mcntrl_cdbmode = 0x00000400,
};
enum {
rw_bit = 1 << 0,
start_bit = 1 << 8,
stop_bit = 1 << 9,
};
#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */
#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */
#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */
#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */
#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */
#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */
#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */
#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */
#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */
#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */
#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */
#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */
#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */
#define HCLK_MHZ 13
#define I2C_CHIP_NAME "PNX4008-I2C"
#endif /* __ASM_ARCH_I2C_H___ */
/*
* Header file for I2C support on PNX010x/4008.
*
* Author: Dennis Kovalev <dkovalev@ru.mvista.com>
*
* 2004-2006 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef __I2C_PNX_H__
#define __I2C_PNX_H__
#include <asm/arch/i2c.h>
struct i2c_pnx_mif {
int ret; /* Return value */
int mode; /* Interface mode */
struct completion complete; /* I/O completion */
struct timer_list timer; /* Timeout */
char * buf; /* Data buffer */
int len; /* Length of data buffer */
};
struct i2c_pnx_algo_data {
u32 base;
u32 ioaddr;
int irq;
struct i2c_pnx_mif mif;
int last;
};
struct i2c_pnx_data {
int (*suspend) (struct platform_device *pdev, pm_message_t state);
int (*resume) (struct platform_device *pdev);
u32 (*calculate_input_freq) (struct platform_device *pdev);
int (*set_clock_run) (struct platform_device *pdev);
int (*set_clock_stop) (struct platform_device *pdev);
struct i2c_adapter *adapter;
};
#endif /* __I2C_PNX_H__ */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment