Commit 40ace5b3 authored by Abhijeet Kolekar's avatar Abhijeet Kolekar Committed by John W. Linville
Browse files

iwl3945: replace station function with station ops



Patch replaces station function used in driver by station management ops
in 3945.
Signed-off-by: default avatarAbhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: default avatarReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 79fa455a
......@@ -2114,7 +2114,7 @@ static int iwl3945_commit_rxon(struct iwl_priv *priv)
memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
iwl3945_clear_stations_table(priv);
priv->cfg->ops->smgmt->clear_station_table(priv);
/* If we issue a new RXON command which required a tune then we must
* send a new TXPOWER command or we won't be able to Tx any frames */
......@@ -2125,7 +2125,7 @@ static int iwl3945_commit_rxon(struct iwl_priv *priv)
}
/* Add the broadcast address so we can send broadcast frames */
if (iwl3945_add_station(priv, iwl_bcast_addr, 0, 0) ==
if (priv->cfg->ops->smgmt->add_station(priv, iwl_bcast_addr, 0, 0) ==
IWL_INVALID_STATION) {
IWL_ERR(priv, "Error adding BROADCAST address for transmit.\n");
return -EIO;
......@@ -2135,8 +2135,8 @@ static int iwl3945_commit_rxon(struct iwl_priv *priv)
* add the IWL_AP_ID to the station rate table */
if (iwl_is_associated(priv) &&
(priv->iw_mode == NL80211_IFTYPE_STATION))
if (iwl3945_add_station(priv, priv->active_rxon.bssid_addr,
1, 0)
if (priv->cfg->ops->smgmt->add_station(priv,
priv->active_rxon.bssid_addr, 1, 0)
== IWL_INVALID_STATION) {
IWL_ERR(priv, "Error adding AP address for transmit\n");
return -EIO;
......
......@@ -588,7 +588,7 @@ static int iwl3945_set_mode(struct iwl_priv *priv, int mode)
iwl_connection_init_rx_config(priv, mode);
iwl3945_clear_stations_table(priv);
priv->cfg->ops->smgmt->clear_station_table(priv);
/* don't commit rxon if rf-kill is on*/
if (!iwl_is_ready_rf(priv))
......@@ -734,7 +734,7 @@ static int iwl3945_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr)
/* If we are an AP, then find the station, or use BCAST */
case NL80211_IFTYPE_AP:
sta_id = iwl3945_hw_find_station(priv, hdr->addr1);
sta_id = priv->cfg->ops->smgmt->find_station(priv, hdr->addr1);
if (sta_id != IWL_INVALID_STATION)
return sta_id;
return priv->hw_params.bcast_sta_id;
......@@ -743,11 +743,12 @@ static int iwl3945_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr)
* or create a new station table entry */
case NL80211_IFTYPE_ADHOC: {
/* Create new station table entry */
sta_id = iwl3945_hw_find_station(priv, hdr->addr1);
sta_id = priv->cfg->ops->smgmt->find_station(priv, hdr->addr1);
if (sta_id != IWL_INVALID_STATION)
return sta_id;
sta_id = iwl3945_add_station(priv, hdr->addr1, 0, CMD_ASYNC);
sta_id = priv->cfg->ops->smgmt->add_station(priv,
hdr->addr1, 0, CMD_ASYNC);
if (sta_id != IWL_INVALID_STATION)
return sta_id;
......@@ -1883,7 +1884,7 @@ static void iwl3945_error_recovery(struct iwl_priv *priv)
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
iwlcore_commit_rxon(priv);
iwl3945_add_station(priv, priv->bssid, 1, 0);
priv->cfg->ops->smgmt->add_station(priv, priv->bssid, 1, 0);
spin_lock_irqsave(&priv->lock, flags);
priv->assoc_id = le16_to_cpu(priv->staging_rxon.assoc_id);
......@@ -2678,7 +2679,7 @@ static void iwl3945_alive_start(struct iwl_priv *priv)
goto restart;
}
iwl3945_clear_stations_table(priv);
priv->cfg->ops->smgmt->clear_station_table(priv);
rc = iwl_grab_nic_access(priv);
if (rc) {
......@@ -2783,7 +2784,7 @@ static void __iwl3945_down(struct iwl_priv *priv)
set_bit(STATUS_EXIT_PENDING, &priv->status);
iwl3945_led_unregister(priv);
iwl3945_clear_stations_table(priv);
priv->cfg->ops->smgmt->clear_station_table(priv);
/* Unblock any waiting calls */
wake_up_interruptible_all(&priv->wait_command_queue);
......@@ -2940,7 +2941,7 @@ static int __iwl3945_up(struct iwl_priv *priv)
for (i = 0; i < MAX_HW_RESTARTS; i++) {
iwl3945_clear_stations_table(priv);
priv->cfg->ops->smgmt->clear_station_table(priv);
/* load bootstrap state machine,
* load bootstrap program into processor's memory,
......@@ -3332,7 +3333,7 @@ void iwl3945_post_associate(struct iwl_priv *priv)
case NL80211_IFTYPE_ADHOC:
priv->assoc_id = 1;
iwl3945_add_station(priv, priv->bssid, 0, 0);
priv->cfg->ops->smgmt->add_station(priv, priv->bssid, 0, 0);
iwl3945_sync_sta(priv, IWL_STA_ID,
(priv->band == IEEE80211_BAND_5GHZ) ?
IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP,
......@@ -3660,7 +3661,7 @@ static void iwl3945_config_ap(struct iwl_priv *priv)
/* restore RXON assoc */
priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
iwlcore_commit_rxon(priv);
iwl3945_add_station(priv, iwl_bcast_addr, 0, 0);
priv->cfg->ops->smgmt->add_station(priv, iwl_bcast_addr, 0, 0);
}
iwl3945_send_beacon_cmd(priv);
......@@ -3752,7 +3753,7 @@ static int iwl3945_mac_config_interface(struct ieee80211_hw *hw,
else {
rc = iwlcore_commit_rxon(priv);
if ((priv->iw_mode == NL80211_IFTYPE_STATION) && rc)
iwl3945_add_station(priv,
priv->cfg->ops->smgmt->add_station(priv,
priv->active_rxon.bssid_addr, 1, 0);
}
......@@ -3814,7 +3815,7 @@ static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
static_key = !iwl_is_associated(priv);
if (!static_key) {
sta_id = iwl3945_hw_find_station(priv, addr);
sta_id = priv->cfg->ops->smgmt->find_station(priv, addr);
if (sta_id == IWL_INVALID_STATION) {
IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n",
addr);
......@@ -4497,7 +4498,7 @@ static int iwl3945_init_drv(struct iwl_priv *priv)
mutex_init(&priv->mutex);
/* Clear the driver's (not device's) station table */
iwl3945_clear_stations_table(priv);
priv->cfg->ops->smgmt->clear_station_table(priv);
priv->data_retry_limit = -1;
priv->ieee_channels = NULL;
......@@ -4860,7 +4861,7 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
iwl3945_hw_txq_ctx_free(priv);
iwl3945_unset_hw_params(priv);
iwl3945_clear_stations_table(priv);
priv->cfg->ops->smgmt->clear_station_table(priv);
/*netif_stop_queue(dev); */
flush_workqueue(priv->workqueue);
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment