Commit 3a0c52a6 authored by Vladimir Kondratiev's avatar Vladimir Kondratiev Committed by Johannes Berg

cfg80211: add 802.11ad (60gHz band) support

Add enumerations for both cfg80211 and nl80211.
This expands wiphy.bands etc. arrays.

Extend channel <-> frequency translation to cover 60g band
and modify the rate check logic since there are no legacy
mandatory rates (only MCS is used.)
Signed-off-by: default avatarVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
parent d9b3b28b
......@@ -946,7 +946,7 @@ il3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id)
case IEEE80211_BAND_5GHZ:
rs_sta->expected_tpt = il3945_expected_tpt_a;
break;
case IEEE80211_NUM_BANDS:
default:
BUG();
break;
}
......
......@@ -2545,10 +2545,12 @@ enum nl80211_tx_rate_attributes {
* enum nl80211_band - Frequency band
* @NL80211_BAND_2GHZ: 2.4 GHz ISM band
* @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
* @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
*/
enum nl80211_band {
NL80211_BAND_2GHZ,
NL80211_BAND_5GHZ,
NL80211_BAND_60GHZ,
};
/**
......
......@@ -70,11 +70,13 @@
*
* @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
* @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
* @IEEE80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
* @IEEE80211_NUM_BANDS: number of defined bands
*/
enum ieee80211_band {
IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
IEEE80211_BAND_60GHZ = NL80211_BAND_60GHZ,
/* keep last */
IEEE80211_NUM_BANDS
......
......@@ -140,6 +140,8 @@ static __le16 ieee80211_duration(struct ieee80211_tx_data *tx,
if (r->flags & IEEE80211_RATE_MANDATORY_A)
mrate = r->bitrate;
break;
case IEEE80211_BAND_60GHZ:
/* TODO, for now fall through */
case IEEE80211_NUM_BANDS:
WARN_ON(1);
break;
......
......@@ -468,8 +468,14 @@ int wiphy_register(struct wiphy *wiphy)
continue;
sband->band = band;
if (WARN_ON(!sband->n_channels || !sband->n_bitrates))
if (WARN_ON(!sband->n_channels))
return -EINVAL;
/*
* on 60gHz band, there are no legacy rates, so
* n_bitrates is 0
*/
if (WARN_ON(band != IEEE80211_BAND_60GHZ &&
!sband->n_bitrates))
return -EINVAL;
/*
......
......@@ -35,19 +35,29 @@ int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band)
{
/* see 802.11 17.3.8.3.2 and Annex J
* there are overlapping channel numbers in 5GHz and 2GHz bands */
if (band == IEEE80211_BAND_5GHZ) {
if (chan >= 182 && chan <= 196)
return 4000 + chan * 5;
else
return 5000 + chan * 5;
} else { /* IEEE80211_BAND_2GHZ */
if (chan <= 0)
return 0; /* not supported */
switch (band) {
case IEEE80211_BAND_2GHZ:
if (chan == 14)
return 2484;
else if (chan < 14)
return 2407 + chan * 5;
break;
case IEEE80211_BAND_5GHZ:
if (chan >= 182 && chan <= 196)
return 4000 + chan * 5;
else
return 0; /* not supported */
return 5000 + chan * 5;
break;
case IEEE80211_BAND_60GHZ:
if (chan < 5)
return 56160 + chan * 2160;
break;
default:
;
}
return 0; /* not supported */
}
EXPORT_SYMBOL(ieee80211_channel_to_frequency);
......@@ -60,8 +70,12 @@ int ieee80211_frequency_to_channel(int freq)
return (freq - 2407) / 5;
else if (freq >= 4910 && freq <= 4980)
return (freq - 4000) / 5;
else
else if (freq <= 45000) /* DMG band lower limit */
return (freq - 5000) / 5;
else if (freq >= 58320 && freq <= 64800)
return (freq - 56160) / 2160;
else
return 0;
}
EXPORT_SYMBOL(ieee80211_frequency_to_channel);
......@@ -137,6 +151,11 @@ static void set_mandatory_flags_band(struct ieee80211_supported_band *sband,
}
WARN_ON(want != 0 && want != 3 && want != 6);
break;
case IEEE80211_BAND_60GHZ:
/* check for mandatory HT MCS 1..4 */
WARN_ON(!sband->ht_cap.ht_supported);
WARN_ON((sband->ht_cap.mcs.rx_mask[0] & 0x1e) != 0x1e);
break;
case IEEE80211_NUM_BANDS:
WARN_ON(1);
break;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment