All new accounts created on Gitlab now require administrator approval. If you invite any collaborators, please let Flux staff know so they can approve the accounts.

Commit 3853a042 authored by Adrian Hunter's avatar Adrian Hunter Committed by Ulf Hansson

mmc: core: Record card drive strength

In preparation for adding drive strength support
for eMMC, add drive_strength to struct mmc_card
to record the card drive strength for UHS-I modes
and HS200 / HS400. For eMMC this will be needed
when switching between HS200 and HS400.
Signed-off-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent e23350b3
......@@ -389,6 +389,8 @@ static int sd_select_driver_type(struct mmc_card *card, u8 *status)
int card_drv_type, drive_strength, drv_type;
int err;
card->drive_strength = 0;
card_drv_type = card->sw_caps.sd3_drv_type | SD_DRIVER_TYPE_B;
drive_strength = mmc_select_drive_strength(card,
......@@ -404,6 +406,7 @@ static int sd_select_driver_type(struct mmc_card *card, u8 *status)
mmc_hostname(card->host));
return 0;
}
card->drive_strength = drive_strength;
}
if (drv_type)
......
......@@ -406,6 +406,8 @@ static void sdio_select_driver_type(struct mmc_card *card)
unsigned char card_strength;
int err;
card->drive_strength = 0;
card_drv_type = card->sw_caps.sd3_drv_type | SD_DRIVER_TYPE_B;
drive_strength = mmc_select_drive_strength(card,
......@@ -427,6 +429,7 @@ static void sdio_select_driver_type(struct mmc_card *card)
card_strength, NULL);
if (err)
return;
card->drive_strength = drive_strength;
}
if (drv_type)
......
......@@ -305,6 +305,7 @@ struct mmc_card {
unsigned int sd_bus_speed; /* Bus Speed Mode set for the card */
unsigned int mmc_avail_type; /* supported device type by both host and card */
unsigned int drive_strength; /* for UHS-I, HS200 or HS400 */
struct dentry *debugfs_root;
struct mmc_part part[MMC_NUM_PHY_PARTITION]; /* physical partitions */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment