Commit 31eec8a6 authored by John Garry's avatar John Garry Committed by Martin K. Petersen

hisi_sas: add hisi_sas_slave_configure()

In high-datarate aging tests, it is found that the
SCSI framework can periodically issue lu resets as
some commands timeout.
Response TASK SET FULL and SAS_QUEUE_FULL may be
returned many times for the same command, causing the
The SAS_QUEUE_FULL errors come from
and TRANS_TX_ERR_FRAME_TXED errors. They do not mean
that the queue is full in the host, but rather it is
equivalent to meaning the queue is full for the sdev.
To overcome this, the queue depth for the sdev is
reduced to 64 (from 256, set in sas_slave_configure()).
Normally error code SAS_QUEUE_FULL will result in the
sdev queue depth falling, but it falls too slowly during
high-datarate tests and commands timeout before it
has fallen to an adequete level from original value.
Signed-off-by: default avatarJohn Garry <>
Reviewed-by: default avatarHannes Reinecke <>
Signed-off-by: default avatarMartin K. Petersen <>
parent 9c8ee657
......@@ -453,6 +453,19 @@ static int hisi_sas_dev_found(struct domain_device *device)
return 0;
static int hisi_sas_slave_configure(struct scsi_device *sdev)
struct domain_device *dev = sdev_to_domain_dev(sdev);
int ret = sas_slave_configure(sdev);
if (ret)
return ret;
if (!dev_is_sata(dev))
sas_change_queue_depth(sdev, 64);
return 0;
static void hisi_sas_scan_start(struct Scsi_Host *shost)
struct hisi_hba *hisi_hba = shost_priv(shost);
......@@ -990,7 +1003,7 @@ static struct scsi_host_template hisi_sas_sht = {
.name = DRV_NAME,
.queuecommand = sas_queuecommand,
.target_alloc = sas_target_alloc,
.slave_configure = sas_slave_configure,
.slave_configure = hisi_sas_slave_configure,
.scan_finished = hisi_sas_scan_finished,
.scan_start = hisi_sas_scan_start,
.change_queue_depth = sas_change_queue_depth,
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment