Commit 2f3870e9 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "This week's arm-soc fixes:

   - Another set of OMAP fixes
     * Clock fixes
     * Restart handling
     * PHY regulators
     * SATA hwmod data for DRA7
     + Some trivial fixes and removal of a bit of dead code
   - Exynos fixes
     * A bunch of clock fixes
     * Some SMP fixes
     * Exynos multi-core timer: register as clocksource and fix ftrace.
     + a few other minor fixes

  There's also a couple more patches, and at91 fix for USB caused by
  common clock conversion, and more MAINTAINERS entries for shmobile.

  We're definitely switching to only regression fixes from here on out,
  we've been a little less strict than usual up until now"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
  ARM: at91: at91sam9x5: add clocks for usb device
  ARM: EXYNOS: Register cpuidle device only on exynos4210 and 5250
  ARM: dts: Add clock property for mfc_pd in exynos5420
  clk: exynos5420: Add IDs for clocks used in PD mfc
  ARM: EXYNOS: Add support for clock handling in power domain
  ARM: OMAP2+: Remove non working OMAP HDMI audio initialization
  ARM: imx: fix shared gate clock
  ARM: dts: Update the parent for Audss clocks in Exynos5420
  ARM: EXYNOS: Update secondary boot addr for secure mode
  ARM: dts: Fix TI CPSW Phy mode selection on IGEP COM AQUILA.
  ARM: dts: am335x-evmsk: Enable the McASP FIFO for audio
  ARM: dts: am335x-evm: Enable the McASP FIFO for audio
  ARM: OMAP2+: Make GPMC skip disabled devices
  ARM: OMAP2+: create dsp device only on OMAP3 SoCs
  ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply always on
  ARM: DRA7/AM43XX: fix header definition for omap44xx_restart
  ARM: OMAP2+: clock/dpll: fix _dpll_test_fint arithmetics overflow
  ARM: DRA7: hwmod: Add SYSCONFIG for usb_otg_ss
  ARM: DRA7: hwmod: Fixup SATA hwmod
  ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver
  ...
parents 5fa77b54 cacadb4f
......@@ -9,6 +9,18 @@ Required Properties:
- reg: physical base address of the controller and length of memory mapped
region.
Optional Properties:
- clocks: List of clock handles. The parent clocks of the input clocks to the
devices in this power domain are set to oscclk before power gating
and restored back after powering on a domain. This is required for
all domains which are powered on and off and not required for unused
domains.
- clock-names: The following clocks can be specified:
- oscclk: Oscillator clock.
- pclkN, clkN: Pairs of parent of input clock and input clock to the
devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
are supported currently.
Node of a device using power domains must have a samsung,power-domain property
defined with a phandle to respective power domain.
......@@ -19,6 +31,14 @@ Example:
reg = <0x10023C00 0x10>;
};
mfc_pd: power-domain@10044060 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044060 0x20>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
<&clock CLK_MOUT_USER_ACLK333>;
clock-names = "oscclk", "pclk0", "clk0";
};
Example of the node using power domain:
node {
......
......@@ -1314,6 +1314,20 @@ W: http://oss.renesas.com
Q: http://patchwork.kernel.org/project/linux-sh/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
S: Supported
F: arch/arm/boot/dts/emev2*
F: arch/arm/boot/dts/r7s*
F: arch/arm/boot/dts/r8a*
F: arch/arm/boot/dts/sh*
F: arch/arm/configs/ape6evm_defconfig
F: arch/arm/configs/armadillo800eva_defconfig
F: arch/arm/configs/bockw_defconfig
F: arch/arm/configs/genmai_defconfig
F: arch/arm/configs/koelsch_defconfig
F: arch/arm/configs/kzm9g_defconfig
F: arch/arm/configs/lager_defconfig
F: arch/arm/configs/mackerel_defconfig
F: arch/arm/configs/marzen_defconfig
F: arch/arm/configs/shmobile_defconfig
F: arch/arm/mach-shmobile/
F: drivers/sh/
......
......@@ -529,8 +529,8 @@
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
>;
tx-num-evt = <1>;
rx-num-evt = <1>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&tps {
......
......@@ -560,8 +560,8 @@
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
>;
tx-num-evt = <1>;
rx-num-evt = <1>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&tscadc {
......
......@@ -105,10 +105,16 @@
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rmii";
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rmii";
};
&phy_sel {
rmii-clock-ext;
};
&elm {
......
......@@ -1045,6 +1045,8 @@
reg = <0x00500000 0x80000
0xf803c000 0x400>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&usb>, <&udphs_clk>;
clock-names = "hclk", "pclk";
status = "disabled";
ep0 {
......
......@@ -240,6 +240,7 @@
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
......
......@@ -673,10 +673,12 @@
l3_iclk_div: l3_iclk_div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
compatible = "ti,divider-clock";
ti,max-div = <2>;
ti,bit-shift = <4>;
reg = <0x0100>;
clocks = <&dpll_core_h12x2_ck>;
clock-mult = <1>;
clock-div = <1>;
ti,index-power-of-two;
};
l4_root_clk_div: l4_root_clk_div {
......@@ -684,7 +686,7 @@
compatible = "fixed-factor-clock";
clocks = <&l3_iclk_div>;
clock-mult = <1>;
clock-div = <1>;
clock-div = <2>;
};
video1_clk2_div: video1_clk2_div {
......
......@@ -554,7 +554,7 @@
interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
clocks = <&clock CLK_PWM>;
clock-names = "timers";
#pwm-cells = <2>;
#pwm-cells = <3>;
status = "disabled";
};
......
......@@ -167,7 +167,7 @@
compatible = "samsung,exynos5420-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
<&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
......@@ -260,6 +260,9 @@
mfc_pd: power-domain@10044060 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044060 0x20>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
<&clock CLK_MOUT_USER_ACLK333>;
clock-names = "oscclk", "pclk0", "clk0";
};
disp_pd: power-domain@100440C0 {
......
......@@ -173,10 +173,8 @@ static struct platform_device exynos_cpuidle = {
void __init exynos_cpuidle_init(void)
{
if (soc_is_exynos5440())
return;
platform_device_register(&exynos_cpuidle);
if (soc_is_exynos4210() || soc_is_exynos5250())
platform_device_register(&exynos_cpuidle);
}
void __init exynos_cpufreq_init(void)
......@@ -297,7 +295,7 @@ static void __init exynos_dt_machine_init(void)
* This is called from smp_prepare_cpus if we've built for SMP, but
* we still need to set it up for PM and firmware ops if not.
*/
if (!IS_ENABLED(SMP))
if (!IS_ENABLED(CONFIG_SMP))
exynos_sysram_init();
exynos_cpuidle_init();
......
......@@ -57,8 +57,13 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
boot_reg = sysram_ns_base_addr + 0x1c;
if (!soc_is_exynos4212() && !soc_is_exynos3250())
boot_reg += 4*cpu;
/*
* Almost all Exynos-series of SoCs that run in secure mode don't need
* additional offset for every CPU, with Exynos4412 being the only
* exception.
*/
if (soc_is_exynos4412())
boot_reg += 4 * cpu;
__raw_writel(boot_addr, boot_reg);
return 0;
......
......@@ -17,6 +17,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/pm_domain.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
......@@ -24,6 +25,8 @@
#include "regs-pmu.h"
#define MAX_CLK_PER_DOMAIN 4
/*
* Exynos specific wrapper around the generic power domain
*/
......@@ -32,6 +35,9 @@ struct exynos_pm_domain {
char const *name;
bool is_off;
struct generic_pm_domain pd;
struct clk *oscclk;
struct clk *clk[MAX_CLK_PER_DOMAIN];
struct clk *pclk[MAX_CLK_PER_DOMAIN];
};
static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
......@@ -44,6 +50,19 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
pd = container_of(domain, struct exynos_pm_domain, pd);
base = pd->base;
/* Set oscclk before powering off a domain*/
if (!power_on) {
int i;
for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
if (IS_ERR(pd->clk[i]))
break;
if (clk_set_parent(pd->clk[i], pd->oscclk))
pr_err("%s: error setting oscclk as parent to clock %d\n",
pd->name, i);
}
}
pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0;
__raw_writel(pwr, base);
......@@ -60,6 +79,20 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
cpu_relax();
usleep_range(80, 100);
}
/* Restore clocks after powering on a domain*/
if (power_on) {
int i;
for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
if (IS_ERR(pd->clk[i]))
break;
if (clk_set_parent(pd->clk[i], pd->pclk[i]))
pr_err("%s: error setting parent to clock%d\n",
pd->name, i);
}
}
return 0;
}
......@@ -152,9 +185,11 @@ static __init int exynos4_pm_init_power_domain(void)
for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
struct exynos_pm_domain *pd;
int on;
int on, i;
struct device *dev;
pdev = of_find_device_by_node(np);
dev = &pdev->dev;
pd = kzalloc(sizeof(*pd), GFP_KERNEL);
if (!pd) {
......@@ -170,6 +205,30 @@ static __init int exynos4_pm_init_power_domain(void)
pd->pd.power_on = exynos_pd_power_on;
pd->pd.of_node = np;
pd->oscclk = clk_get(dev, "oscclk");
if (IS_ERR(pd->oscclk))
goto no_clk;
for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
char clk_name[8];
snprintf(clk_name, sizeof(clk_name), "clk%d", i);
pd->clk[i] = clk_get(dev, clk_name);
if (IS_ERR(pd->clk[i]))
break;
snprintf(clk_name, sizeof(clk_name), "pclk%d", i);
pd->pclk[i] = clk_get(dev, clk_name);
if (IS_ERR(pd->pclk[i])) {
clk_put(pd->clk[i]);
pd->clk[i] = ERR_PTR(-EINVAL);
break;
}
}
if (IS_ERR(pd->clk[0]))
clk_put(pd->oscclk);
no_clk:
platform_set_drvdata(pdev, pd);
on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;
......
......@@ -67,8 +67,12 @@ static void clk_gate2_disable(struct clk_hw *hw)
spin_lock_irqsave(gate->lock, flags);
if (gate->share_count && --(*gate->share_count) > 0)
goto out;
if (gate->share_count) {
if (WARN_ON(*gate->share_count == 0))
goto out;
else if (--(*gate->share_count) > 0)
goto out;
}
reg = readl(gate->reg);
reg &= ~(3 << gate->bit_idx);
......@@ -78,19 +82,26 @@ out:
spin_unlock_irqrestore(gate->lock, flags);
}
static int clk_gate2_is_enabled(struct clk_hw *hw)
static int clk_gate2_reg_is_enabled(void __iomem *reg, u8 bit_idx)
{
u32 reg;
struct clk_gate2 *gate = to_clk_gate2(hw);
u32 val = readl(reg);
reg = readl(gate->reg);
if (((reg >> gate->bit_idx) & 1) == 1)
if (((val >> bit_idx) & 1) == 1)
return 1;
return 0;
}
static int clk_gate2_is_enabled(struct clk_hw *hw)
{
struct clk_gate2 *gate = to_clk_gate2(hw);
if (gate->share_count)
return !!(*gate->share_count);
else
return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx);
}
static struct clk_ops clk_gate2_ops = {
.enable = clk_gate2_enable,
.disable = clk_gate2_disable,
......@@ -116,6 +127,10 @@ struct clk *clk_register_gate2(struct device *dev, const char *name,
gate->bit_idx = bit_idx;
gate->flags = clk_gate2_flags;
gate->lock = lock;
/* Initialize share_count per hardware state */
if (share_count)
*share_count = clk_gate2_reg_is_enabled(reg, bit_idx) ? 1 : 0;
gate->share_count = share_count;
init.name = name;
......
......@@ -76,7 +76,7 @@
* (assuming that it is counting N upwards), or -2 if the enclosing loop
* should skip to the next iteration (again assuming N is increasing).
*/
static int _dpll_test_fint(struct clk_hw_omap *clk, u8 n)
static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
{
struct dpll_data *dd;
long fint, fint_min, fint_max;
......
......@@ -26,11 +26,14 @@
#define OMAP3430_EN_WDT3_SHIFT 12
#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK (1 << 0)
#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT 0
#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT 4
#define OMAP3430_IVA2_DPLL_FREQSEL_MASK (0xf << 4)
#define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT 3
#define OMAP3430_EN_IVA2_DPLL_SHIFT 0
#define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0)
#define OMAP3430_ST_IVA2_SHIFT 0
#define OMAP3430_ST_IVA2_CLK_MASK (1 << 0)
#define OMAP3430_AUTO_IVA2_DPLL_SHIFT 0
#define OMAP3430_AUTO_IVA2_DPLL_MASK (0x7 << 0)
#define OMAP3430_IVA2_CLK_SRC_SHIFT 19
#define OMAP3430_IVA2_CLK_SRC_WIDTH 3
......
......@@ -162,7 +162,8 @@ static inline void omap3xxx_restart(enum reboot_mode mode, const char *cmd)
}
#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
void omap44xx_restart(enum reboot_mode mode, const char *cmd);
#else
static inline void omap44xx_restart(enum reboot_mode mode, const char *cmd)
......
......@@ -297,33 +297,6 @@ static void omap_init_audio(void)
static inline void omap_init_audio(void) {}
#endif
#if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \
defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE)
static struct platform_device omap_hdmi_audio = {
.name = "omap-hdmi-audio",
.id = -1,
};
static void __init omap_init_hdmi_audio(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
oh = omap_hwmod_lookup("dss_hdmi");
if (!oh)
return;
pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0);
WARN(IS_ERR(pdev),
"Can't build omap_device for omap-hdmi-audio-dai.\n");
platform_device_register(&omap_hdmi_audio);
}
#else
static inline void omap_init_hdmi_audio(void) {}
#endif
#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
#include <linux/platform_data/spi-omap2-mcspi.h>
......@@ -459,7 +432,6 @@ static int __init omap2_init_devices(void)
*/
omap_init_audio();
omap_init_camera();
omap_init_hdmi_audio();
omap_init_mbox();
/* If dtb is there, the devices will be created dynamically */
if (!of_have_populated_dt()) {
......
......@@ -29,6 +29,7 @@
#ifdef CONFIG_TIDSPBRIDGE_DVFS
#include "omap-pm.h"
#endif
#include "soc.h"
#include <linux/platform_data/dsp-omap.h>
......@@ -59,6 +60,9 @@ void __init omap_dsp_reserve_sdram_memblock(void)
phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
phys_addr_t paddr;
if (!cpu_is_omap34xx())
return;
if (!size)
return;
......@@ -83,6 +87,9 @@ static int __init omap_dsp_init(void)
int err = -ENOMEM;
struct omap_dsp_platform_data *pdata = &omap_dsp_pdata;
if (!cpu_is_omap34xx())
return 0;
pdata->phys_mempool_base = omap_dsp_get_mempool_base();
if (pdata->phys_mempool_base) {
......@@ -115,6 +122,9 @@ module_init(omap_dsp_init);
static void __exit omap_dsp_exit(void)
{
if (!cpu_is_omap34xx())
return;
platform_device_unregister(omap_dsp_pdev);
}
module_exit(omap_dsp_exit);
......
......@@ -1615,7 +1615,7 @@ static int gpmc_probe_dt(struct platform_device *pdev)
return ret;
}
for_each_child_of_node(pdev->dev.of_node, child) {
for_each_available_child_of_node(pdev->dev.of_node, child) {
if (!child->name)
continue;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment