Commit 2a41a610 authored by Tejun Heo's avatar Tejun Heo Committed by Jeff Garzik
Browse files

[PATCH] sata_sil24: separate out sil24_init_controller()



Separate out controller initialization from sil24_init_one() into
sil24_init_controller().  This will be used by resume.
Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent afb5a7cb
......@@ -988,6 +988,64 @@ static void sil24_host_stop(struct ata_host_set *host_set)
kfree(hpriv);
}
static void sil24_init_controller(struct pci_dev *pdev, int n_ports,
unsigned long host_flags,
void __iomem *host_base,
void __iomem *port_base)
{
u32 tmp;
int i;
/* GPIO off */
writel(0, host_base + HOST_FLASH_CMD);
/* clear global reset & mask interrupts during initialization */
writel(0, host_base + HOST_CTRL);
/* init ports */
for (i = 0; i < n_ports; i++) {
void __iomem *port = port_base + i * PORT_REGS_SIZE;
/* Initial PHY setting */
writel(0x20c, port + PORT_PHY_CFG);
/* Clear port RST */
tmp = readl(port + PORT_CTRL_STAT);
if (tmp & PORT_CS_PORT_RST) {
writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
tmp = ata_wait_register(port + PORT_CTRL_STAT,
PORT_CS_PORT_RST,
PORT_CS_PORT_RST, 10, 100);
if (tmp & PORT_CS_PORT_RST)
dev_printk(KERN_ERR, &pdev->dev,
"failed to clear port RST\n");
}
/* Configure IRQ WoC */
if (host_flags & SIL24_FLAG_PCIX_IRQ_WOC)
writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
else
writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
/* Zero error counters. */
writel(0x8000, port + PORT_DECODE_ERR_THRESH);
writel(0x8000, port + PORT_CRC_ERR_THRESH);
writel(0x8000, port + PORT_HSHK_ERR_THRESH);
writel(0x0000, port + PORT_DECODE_ERR_CNT);
writel(0x0000, port + PORT_CRC_ERR_CNT);
writel(0x0000, port + PORT_HSHK_ERR_CNT);
/* Always use 64bit activation */
writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
/* Clear port multiplier enable and resume bits */
writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR);
}
/* Turn on interrupts */
writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
}
static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version = 0;
......@@ -1076,9 +1134,6 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
}
}
/* GPIO off */
writel(0, host_base + HOST_FLASH_CMD);
/* Apply workaround for completion IRQ loss on PCI-X errata */
if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) {
tmp = readl(host_base + HOST_CTRL);
......@@ -1090,56 +1145,18 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
probe_ent->host_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
}
/* clear global reset & mask interrupts during initialization */
writel(0, host_base + HOST_CTRL);
for (i = 0; i < probe_ent->n_ports; i++) {
void __iomem *port = port_base + i * PORT_REGS_SIZE;
unsigned long portu = (unsigned long)port;
unsigned long portu =
(unsigned long)port_base + i * PORT_REGS_SIZE;
probe_ent->port[i].cmd_addr = portu;
probe_ent->port[i].scr_addr = portu + PORT_SCONTROL;
ata_std_ports(&probe_ent->port[i]);
/* Initial PHY setting */
writel(0x20c, port + PORT_PHY_CFG);
/* Clear port RST */
tmp = readl(port + PORT_CTRL_STAT);
if (tmp & PORT_CS_PORT_RST) {
writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
tmp = ata_wait_register(port + PORT_CTRL_STAT,
PORT_CS_PORT_RST,
PORT_CS_PORT_RST, 10, 100);
if (tmp & PORT_CS_PORT_RST)
dev_printk(KERN_ERR, &pdev->dev,
"failed to clear port RST\n");
}
/* Configure IRQ WoC */
if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC)
writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
else
writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
/* Zero error counters. */
writel(0x8000, port + PORT_DECODE_ERR_THRESH);
writel(0x8000, port + PORT_CRC_ERR_THRESH);
writel(0x8000, port + PORT_HSHK_ERR_THRESH);
writel(0x0000, port + PORT_DECODE_ERR_CNT);
writel(0x0000, port + PORT_CRC_ERR_CNT);
writel(0x0000, port + PORT_HSHK_ERR_CNT);
/* Always use 64bit activation */
writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
/* Clear port multiplier enable and resume bits */
writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR);
}
/* Turn on interrupts */
writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
sil24_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags,
host_base, port_base);
pci_set_master(pdev);
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment