Commit 28f0ccb9 authored by Grygorii Strashko's avatar Grygorii Strashko Committed by David S. Miller

drivers: net: davinci_mdio: split reset function on init_clk and enable

The Davinci MDIO MDIO_CONTROL.CLKDIV can be calculated only once
during probe, hence split __davinci_mdio_reset() on
davinci_mdio_init_clk() and davinci_mdio_enable(). Initialize and
save CLKDIV in .probe(). Then just use saved value.
Signed-off-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent a01d7baa
......@@ -98,9 +98,10 @@ struct davinci_mdio_data {
* if MDIO bus is registered from DT.
*/
bool skip_scan;
u32 clk_div;
};
static void __davinci_mdio_reset(struct davinci_mdio_data *data)
static void davinci_mdio_init_clk(struct davinci_mdio_data *data)
{
u32 mdio_in, div, mdio_out_khz, access_time;
......@@ -109,9 +110,7 @@ static void __davinci_mdio_reset(struct davinci_mdio_data *data)
if (div > CONTROL_MAX_DIV)
div = CONTROL_MAX_DIV;
/* set enable and clock divider */
__raw_writel(div | CONTROL_ENABLE, &data->regs->control);
data->clk_div = div;
/*
* One mdio transaction consists of:
* 32 bits of preamble
......@@ -132,12 +131,18 @@ static void __davinci_mdio_reset(struct davinci_mdio_data *data)
data->access_time = 1;
}
static void davinci_mdio_enable(struct davinci_mdio_data *data)
{
/* set enable and clock divider */
__raw_writel(data->clk_div | CONTROL_ENABLE, &data->regs->control);
}
static int davinci_mdio_reset(struct mii_bus *bus)
{
struct davinci_mdio_data *data = bus->priv;
u32 phy_mask, ver;
__davinci_mdio_reset(data);
davinci_mdio_enable(data);
/* wait for scan logic to settle */
msleep(PHY_MAX_ADDR * data->access_time);
......@@ -188,7 +193,7 @@ static inline int wait_for_user_access(struct davinci_mdio_data *data)
* operation
*/
dev_warn(data->dev, "resetting idled controller\n");
__davinci_mdio_reset(data);
davinci_mdio_enable(data);
return -EAGAIN;
}
......@@ -350,6 +355,8 @@ static int davinci_mdio_probe(struct platform_device *pdev)
if (IS_ERR(data->regs))
return PTR_ERR(data->regs);
davinci_mdio_init_clk(data);
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
......@@ -425,7 +432,7 @@ static int davinci_mdio_resume(struct device *dev)
pinctrl_pm_select_default_state(dev);
/* restart the scan state machine */
__davinci_mdio_reset(data);
davinci_mdio_enable(data);
return 0;
}
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment