Commit 2738bd68 authored by Bob Copeland's avatar Bob Copeland Committed by John W. Linville
Browse files

mac80211: trivial spelling fixes



Fix spelling and readability of a few lines of kernel doc:

    s/issueing/issuing/g
    s/approriate/appropriate/g
    s/supported by simply/supported simply by/
    s/IEEE80211_HW_BEACON_FILTERING/IEEE80211_HW_BEACON_FILTER/g

Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent ff67bb86
......@@ -1242,8 +1242,8 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
* %IEEE80211_CONF_PS flag enabled means that the powersave mode defined in
* IEEE 802.11-2007 section 11.2 is enabled. This is not to be confused
* with hardware wakeup and sleep states. Driver is responsible for waking
* up the hardware before issueing commands to the hardware and putting it
* back to sleep at approriate times.
* up the hardware before issuing commands to the hardware and putting it
* back to sleep at appropriate times.
*
* When PS is enabled, hardware needs to wakeup for beacons and receive the
* buffered multicast/broadcast frames after the beacon. Also it must be
......@@ -1264,7 +1264,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
* there's data traffic and still saving significantly power in idle
* periods.
*
* Dynamic powersave is supported by simply mac80211 enabling and disabling
* Dynamic powersave is simply supported by mac80211 enabling and disabling
* PS based on traffic. Driver needs to only set %IEEE80211_HW_SUPPORTS_PS
* flag and mac80211 will handle everything automatically. Additionally,
* hardware having support for the dynamic PS feature may set the
......@@ -2458,7 +2458,7 @@ void ieee80211_sta_block_awake(struct ieee80211_hw *hw,
*
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
*
* When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTERING and
* When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTER and
* %IEEE80211_CONF_PS is set, the driver needs to inform whenever the
* hardware is not receiving beacons with this function.
*/
......@@ -2469,7 +2469,7 @@ void ieee80211_beacon_loss(struct ieee80211_vif *vif);
*
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
*
* When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTERING, and
* When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTER, and
* %IEEE80211_CONF_PS and %IEEE80211_HW_CONNECTION_MONITOR are set, the driver
* needs to inform if the connection to the AP has been lost.
*
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment