Commit 22f92bac authored by Ingo Molnar's avatar Ingo Molnar
Browse files

Merge branch 'linus' into sched/core



Merge reason: pick up the latest fixes.
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
parents 557ab425 0f86267b
What: /sys/class/scsi_host/hostX/isci_id
Date: June 2011
Contact: Dave Jiang <dave.jiang@intel.com>
Description:
This file contains the enumerated host ID for the Intel
SCU controller. The Intel(R) C600 Series Chipset SATA/SAS
Storage Control Unit embeds up to two 4-port controllers in
a single PCI device. The controllers are enumerated in order
which usually means the lowest number scsi_host corresponds
with the first controller, but this association is not
guaranteed. The 'isci_id' attribute unambiguously identifies
the controller index: '0' for the first controller,
'1' for the second.
......@@ -380,7 +380,7 @@ will be charged as a new owner of it.
5.2 stat file
5.2.1 memory.stat file includes following statistics
memory.stat file includes following statistics
# per-memory cgroup local status
cache - # of bytes of page cache memory.
......@@ -438,89 +438,6 @@ Note:
file_mapped is accounted only when the memory cgroup is owner of page
cache.)
5.2.2 memory.vmscan_stat
memory.vmscan_stat includes statistics information for memory scanning and
freeing, reclaiming. The statistics shows memory scanning information since
memory cgroup creation and can be reset to 0 by writing 0 as
#echo 0 > ../memory.vmscan_stat
This file contains following statistics.
[param]_[file_or_anon]_pages_by_[reason]_[under_heararchy]
[param]_elapsed_ns_by_[reason]_[under_hierarchy]
For example,
scanned_file_pages_by_limit indicates the number of scanned
file pages at vmscan.
Now, 3 parameters are supported
scanned - the number of pages scanned by vmscan
rotated - the number of pages activated at vmscan
freed - the number of pages freed by vmscan
If "rotated" is high against scanned/freed, the memcg seems busy.
Now, 2 reason are supported
limit - the memory cgroup's limit
system - global memory pressure + softlimit
(global memory pressure not under softlimit is not handled now)
When under_hierarchy is added in the tail, the number indicates the
total memcg scan of its children and itself.
elapsed_ns is a elapsed time in nanosecond. This may include sleep time
and not indicates CPU usage. So, please take this as just showing
latency.
Here is an example.
# cat /cgroup/memory/A/memory.vmscan_stat
scanned_pages_by_limit 9471864
scanned_anon_pages_by_limit 6640629
scanned_file_pages_by_limit 2831235
rotated_pages_by_limit 4243974
rotated_anon_pages_by_limit 3971968
rotated_file_pages_by_limit 272006
freed_pages_by_limit 2318492
freed_anon_pages_by_limit 962052
freed_file_pages_by_limit 1356440
elapsed_ns_by_limit 351386416101
scanned_pages_by_system 0
scanned_anon_pages_by_system 0
scanned_file_pages_by_system 0
rotated_pages_by_system 0
rotated_anon_pages_by_system 0
rotated_file_pages_by_system 0
freed_pages_by_system 0
freed_anon_pages_by_system 0
freed_file_pages_by_system 0
elapsed_ns_by_system 0
scanned_pages_by_limit_under_hierarchy 9471864
scanned_anon_pages_by_limit_under_hierarchy 6640629
scanned_file_pages_by_limit_under_hierarchy 2831235
rotated_pages_by_limit_under_hierarchy 4243974
rotated_anon_pages_by_limit_under_hierarchy 3971968
rotated_file_pages_by_limit_under_hierarchy 272006
freed_pages_by_limit_under_hierarchy 2318492
freed_anon_pages_by_limit_under_hierarchy 962052
freed_file_pages_by_limit_under_hierarchy 1356440
elapsed_ns_by_limit_under_hierarchy 351386416101
scanned_pages_by_system_under_hierarchy 0
scanned_anon_pages_by_system_under_hierarchy 0
scanned_file_pages_by_system_under_hierarchy 0
rotated_pages_by_system_under_hierarchy 0
rotated_anon_pages_by_system_under_hierarchy 0
rotated_file_pages_by_system_under_hierarchy 0
freed_pages_by_system_under_hierarchy 0
freed_anon_pages_by_system_under_hierarchy 0
freed_file_pages_by_system_under_hierarchy 0
elapsed_ns_by_system_under_hierarchy 0
5.3 swappiness
Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
......
......@@ -35,13 +35,6 @@ the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
All Sysfs entries are named with their core_id (represented here by 'X').
tempX_input - Core temperature (in millidegrees Celsius).
tempX_max - All cooling devices should be turned on (on Core2).
Initialized with IA32_THERM_INTERRUPT. When the CPU
temperature reaches this temperature, an interrupt is
generated and tempX_max_alarm is set.
tempX_max_hyst - If the CPU temperature falls below than temperature,
an interrupt is generated and tempX_max_alarm is reset.
tempX_max_alarm - Set if the temperature reaches or exceeds tempX_max.
Reset if the temperature drops to or below tempX_max_hyst.
tempX_crit - Maximum junction temperature (in millidegrees Celsius).
tempX_crit_alarm - Set when Out-of-spec bit is set, never clears.
Correct CPU operation is no longer guaranteed.
......@@ -49,9 +42,10 @@ tempX_label - Contains string "Core X", where X is processor
number. For Package temp, this will be "Physical id Y",
where Y is the package number.
The TjMax temperature is set to 85 degrees C if undocumented model specific
register (UMSR) 0xee has bit 30 set. If not the TjMax is 100 degrees C as
(sometimes) documented in processor datasheet.
On CPU models which support it, TjMax is read from a model-specific register.
On other models, it is set to an arbitrary value based on weak heuristics.
If these heuristics don't work for you, you can pass the correct TjMax value
as a module parameter (tjmax).
Appendix A. Known TjMax lists (TBD):
Some information comes from ark.intel.com
......
Note: This driver doesn't have a maintainer.
Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux.
This program is free software; you can redistribute it and/or
......@@ -55,7 +57,6 @@ Test and make sure PCI latency is now correct for all cases.
Authors:
Sten Wang <sten_wang@davicom.com.tw > : Original Author
Tobias Ringstrom <tori@unhappy.mine.nu> : Current Maintainer
Contributors:
......
......@@ -243,7 +243,7 @@ configured. The number of entries in the global flow table is set through:
The number of entries in the per-queue flow table are set through:
/sys/class/net/<dev>/queues/tx-<n>/rps_flow_cnt
/sys/class/net/<dev>/queues/rx-<n>/rps_flow_cnt
== Suggested Configuration
......
......@@ -123,10 +123,11 @@ be automatically shutdown if it's set to "never".
khugepaged runs usually at low frequency so while one may not want to
invoke defrag algorithms synchronously during the page faults, it
should be worth invoking defrag at least in khugepaged. However it's
also possible to disable defrag in khugepaged:
also possible to disable defrag in khugepaged by writing 0 or enable
defrag in khugepaged by writing 1:
echo yes >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
echo no >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
echo 0 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
echo 1 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
You can also control how many pages khugepaged should scan at each
pass:
......
......@@ -1278,7 +1278,6 @@ F: drivers/input/misc/ati_remote2.c
ATLX ETHERNET DRIVERS
M: Jay Cliburn <jcliburn@gmail.com>
M: Chris Snook <chris.snook@gmail.com>
M: Jie Yang <jie.yang@atheros.com>
L: netdev@vger.kernel.org
W: http://sourceforge.net/projects/atl1
W: http://atl1.sourceforge.net
......@@ -1574,7 +1573,6 @@ F: drivers/scsi/bfa/
BROCADE BNA 10 GIGABIT ETHERNET DRIVER
M: Rasesh Mody <rmody@brocade.com>
M: Debashis Dutt <ddutt@brocade.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/bna/
......@@ -1758,7 +1756,6 @@ F: Documentation/zh_CN/
CISCO VIC ETHERNET NIC DRIVER
M: Christian Benvenuti <benve@cisco.com>
M: Vasanthy Kolluri <vkolluri@cisco.com>
M: Roopa Prabhu <roprabhu@cisco.com>
M: David Wang <dwang2@cisco.com>
S: Supported
......@@ -3262,6 +3259,17 @@ F: Documentation/input/multi-touch-protocol.txt
F: drivers/input/input-mt.c
K: \b(ABS|SYN)_MT_
INTEL C600 SERIES SAS CONTROLLER DRIVER
M: Intel SCU Linux support <intel-linux-scu@intel.com>
M: Dan Williams <dan.j.williams@intel.com>
M: Dave Jiang <dave.jiang@intel.com>
M: Ed Nadolski <edmund.nadolski@intel.com>
L: linux-scsi@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git
S: Maintained
F: drivers/scsi/isci/
F: firmware/isci/
INTEL IDLE DRIVER
M: Len Brown <lenb@kernel.org>
L: linux-pm@lists.linux-foundation.org
......@@ -4404,7 +4412,8 @@ L: netfilter@vger.kernel.org
L: coreteam@netfilter.org
W: http://www.netfilter.org/
W: http://www.iptables.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git
S: Supported
F: include/linux/netfilter*
F: include/linux/netfilter/
......@@ -4774,7 +4783,7 @@ F: drivers/net/wireless/orinoco/
OSD LIBRARY and FILESYSTEM
M: Boaz Harrosh <bharrosh@panasas.com>
M: Benny Halevy <bhalevy@panasas.com>
M: Benny Halevy <bhalevy@tonian.com>
L: osd-dev@open-osd.org
W: http://open-osd.org
T: git git://git.open-osd.org/open-osd.git
......@@ -7200,6 +7209,9 @@ W: http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
S: Supported
F: Documentation/hwmon/wm83??
F: drivers/leds/leds-wm83*.c
F: drivers/input/misc/wm831x-on.c
F: drivers/input/touchscreen/wm831x-ts.c
F: drivers/input/touchscreen/wm97*.c
F: drivers/mfd/wm8*.c
F: drivers/power/wm83*.c
F: drivers/rtc/rtc-wm83*.c
......@@ -7209,6 +7221,7 @@ F: drivers/watchdog/wm83*_wdt.c
F: include/linux/mfd/wm831x/
F: include/linux/mfd/wm8350/
F: include/linux/mfd/wm8400*
F: include/linux/wm97xx.h
F: include/sound/wm????.h
F: sound/soc/codecs/wm*
......
VERSION = 3
PATCHLEVEL = 1
SUBLEVEL = 0
EXTRAVERSION = -rc6
EXTRAVERSION = -rc8
NAME = "Divemaster Edition"
# *DOCUMENTATION*
......
......@@ -51,7 +51,7 @@ config GENERIC_CMOS_UPDATE
def_bool y
config GENERIC_GPIO
def_bool y
bool
config ZONE_DMA
bool
......
......@@ -1283,6 +1283,20 @@ config ARM_ERRATA_364296
processor into full low interrupt latency mode. ARM11MPCore
is not affected.
config ARM_ERRATA_764369
bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
depends on CPU_V7 && SMP
help
This option enables the workaround for erratum 764369
affecting Cortex-A9 MPCore with two or more processors (all
current revisions). Under certain timing circumstances, a data
cache line maintenance operation by MVA targeting an Inner
Shareable memory region may fail to proceed up to either the
Point of Coherency or to the Point of Unification of the
system. This workaround adds a DSB instruction before the
relevant cache maintenance functions and sets a specific bit
in the diagnostic control register of the SCU.
endmenu
source "arch/arm/common/Kconfig"
......
......@@ -57,14 +57,14 @@
};
sdhci@c8000200 {
gpios = <&gpio 69 0>, /* cd, gpio PI5 */
<&gpio 57 0>, /* wp, gpio PH1 */
<&gpio 155 0>; /* power, gpio PT3 */
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 155 0>; /* gpio PT3 */
};
sdhci@c8000600 {
gpios = <&gpio 58 0>, /* cd, gpio PH2 */
<&gpio 59 0>, /* wp, gpio PH3 */
<&gpio 70 0>; /* power, gpio PI6 */
cd-gpios = <&gpio 58 0>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
};
};
......@@ -21,8 +21,8 @@
};
sdhci@c8000400 {
gpios = <&gpio 69 0>, /* cd, gpio PI5 */
<&gpio 57 0>, /* wp, gpio PH1 */
<&gpio 70 0>; /* power, gpio PI6 */
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
};
};
......@@ -25,17 +25,17 @@
#ifdef CONFIG_SMP
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \
smp_mb(); \
__asm__ __volatile__( \
"1: ldrex %1, [%2]\n" \
"1: ldrex %1, [%3]\n" \
" " insn "\n" \
"2: strex %1, %0, [%2]\n" \
" teq %1, #0\n" \
"2: strex %2, %0, [%3]\n" \
" teq %2, #0\n" \
" bne 1b\n" \
" mov %0, #0\n" \
__futex_atomic_ex_table("%4") \
: "=&r" (ret), "=&r" (oldval) \
__futex_atomic_ex_table("%5") \
: "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \
: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \
: "cc", "memory")
......@@ -73,14 +73,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
#include <linux/preempt.h>
#include <asm/domain.h>
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \
__asm__ __volatile__( \
"1: " T(ldr) " %1, [%2]\n" \
"1: " T(ldr) " %1, [%3]\n" \
" " insn "\n" \
"2: " T(str) " %0, [%2]\n" \
"2: " T(str) " %0, [%3]\n" \
" mov %0, #0\n" \
__futex_atomic_ex_table("%4") \
: "=&r" (ret), "=&r" (oldval) \
__futex_atomic_ex_table("%5") \
: "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \
: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \
: "cc", "memory")
......@@ -117,7 +117,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
int cmp = (encoded_op >> 24) & 15;
int oparg = (encoded_op << 8) >> 20;
int cmparg = (encoded_op << 20) >> 20;
int oldval = 0, ret;
int oldval = 0, ret, tmp;
if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
oparg = 1 << oparg;
......@@ -129,19 +129,19 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
switch (op) {
case FUTEX_OP_SET:
__futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg);
__futex_atomic_op("mov %0, %4", ret, oldval, tmp, uaddr, oparg);
break;
case FUTEX_OP_ADD:
__futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg);
__futex_atomic_op("add %0, %1, %4", ret, oldval, tmp, uaddr, oparg);
break;
case FUTEX_OP_OR:
__futex_atomic_op("orr %0, %1, %3", ret, oldval, uaddr, oparg);
__futex_atomic_op("orr %0, %1, %4", ret, oldval, tmp, uaddr, oparg);
break;
case FUTEX_OP_ANDN:
__futex_atomic_op("and %0, %1, %3", ret, oldval, uaddr, ~oparg);
__futex_atomic_op("and %0, %1, %4", ret, oldval, tmp, uaddr, ~oparg);
break;
case FUTEX_OP_XOR:
__futex_atomic_op("eor %0, %1, %3", ret, oldval, uaddr, oparg);
__futex_atomic_op("eor %0, %1, %4", ret, oldval, tmp, uaddr, oparg);
break;
default:
ret = -ENOSYS;
......
......@@ -478,8 +478,8 @@
/*
* Unimplemented (or alternatively implemented) syscalls
*/
#define __IGNORE_fadvise64_64 1
#define __IGNORE_migrate_pages 1
#define __IGNORE_fadvise64_64
#define __IGNORE_migrate_pages
#endif /* __KERNEL__ */
#endif /* __ASM_ARM_UNISTD_H */
......@@ -13,6 +13,7 @@
#include <asm/smp_scu.h>
#include <asm/cacheflush.h>
#include <asm/cputype.h>
#define SCU_CTRL 0x00
#define SCU_CONFIG 0x04
......@@ -37,6 +38,15 @@ void __init scu_enable(void __iomem *scu_base)
{
u32 scu_ctrl;
#ifdef CONFIG_ARM_ERRATA_764369
/* Cortex-A9 only */
if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) {
scu_ctrl = __raw_readl(scu_base + 0x30);
if (!(scu_ctrl & 1))
__raw_writel(scu_ctrl | 0x1, scu_base + 0x30);
}
#endif
scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
/* already enabled? */
if (scu_ctrl & 1)
......
......@@ -23,8 +23,10 @@
#if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)
#define ARM_EXIT_KEEP(x) x
#define ARM_EXIT_DISCARD(x)
#else
#define ARM_EXIT_KEEP(x)
#define ARM_EXIT_DISCARD(x) x
#endif
OUTPUT_ARCH(arm)
......@@ -39,6 +41,11 @@ jiffies = jiffies_64 + 4;
SECTIONS
{
/*
* XXX: The linker does not define how output sections are
* assigned to input sections when there are multiple statements
* matching the same input section name. There is no documented
* order of matching.
*
* unwind exit sections must be discarded before the rest of the
* unwind sections get included.
*/
......@@ -47,6 +54,9 @@ SECTIONS
*(.ARM.extab.exit.text)
ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text))
ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text))
ARM_EXIT_DISCARD(EXIT_TEXT)
ARM_EXIT_DISCARD(EXIT_DATA)
EXIT_CALL
#ifndef CONFIG_HOTPLUG
*(.ARM.exidx.devexit.text)
*(.ARM.extab.devexit.text)
......@@ -58,6 +68,8 @@ SECTIONS
#ifndef CONFIG_SMP_ON_UP
*(.alt.smp.init)
#endif
*(.discard)
*(.discard.*)
}
#ifdef CONFIG_XIP_KERNEL
......@@ -279,9 +291,6 @@ SECTIONS
STABS_DEBUG
.comment 0 : { *(.comment) }
/* Default discards */
DISCARDS
}
/*
......
......@@ -158,7 +158,7 @@ void __init dove_spi0_init(void)
void __init dove_spi1_init(void)
{
orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk());
orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk());
}
/*****************************************************************************
......
......@@ -899,8 +899,7 @@ static struct clksrc_clk clksrcs[] = {
.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 },
}, {
.clk = {
.name = "sclk_cam",
.devname = "exynos4-fimc.0",
.name = "sclk_cam0",
.enable = exynos4_clksrc_mask_cam_ctrl,
.ctrlbit = (1 << 16),
},
......@@ -909,8 +908,7 @@ static struct clksrc_clk clksrcs[] = {
.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 },
}, {
.clk = {
.name = "sclk_cam",
.devname = "exynos4-fimc.1",
.name = "sclk_cam1",
.enable = exynos4_clksrc_mask_cam_ctrl,
.ctrlbit = (1 << 20),
},
......@@ -1160,7 +1158,7 @@ void __init_or_cpufreq exynos4_setup_clocks(void)
vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
__raw_readl(S5P_VPLL_CON1), pll_4650);
__raw_readl(S5P_VPLL_CON1), pll_4650c);
clk_fout_apll.ops = &exynos4_fout_apll_ops;
clk_fout_mpll.rate = mpll;
......
......@@ -132,12 +132,18 @@ static cycle_t exynos4_frc_read(struct clocksource *cs)
return ((cycle_t)hi << 32) | lo;
}
static void exynos4_frc_resume(struct clocksource *cs)
{
exynos4_mct_frc_start(0, 0);
}
struct clocksource mct_frc = {
.name = "mct-frc",
.rating = 400,
.read = exynos4_frc_read,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.resume = exynos4_frc_resume,
};
static void __init exynos4_clocksource_init(void)
......@@ -389,9 +395,11 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
}
/* Setup the local clock events for a CPU */
void __cpuinit local_timer_setup(struct clock_event_device *evt)
int __cpuinit local_timer_setup(struct clock_event_device *evt)
{
exynos4_mct_tick_init(evt);
return 0;
}
int local_timer_ack(void)
......
......@@ -106,6 +106,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
*/
spin_lock(&boot_lock);
spin_unlock(&boot_lock);
set_cpu_online(cpu, true);
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment