Commit 225b94cd authored by Arnaud Ebalard's avatar Arnaud Ebalard Committed by Jason Cooper
Browse files

ARM: mvebu: Netgear RN104: Use Hardware BCH ECC

The bootloader on the Netgear ReadyNAS RN104 uses Hardware BCH
ECC (strength = 4), while the pxa3xx NAND driver by default uses
Hamming ECC (strength = 1).

This patch changes the ECC mode on these machines to match that
of the bootloader and of the stock firmware. That way, it is
now possible to update the kernel from userland (e.g. using
standard tools from mtd-utils package); u-boot will happily
load and boot it.

The issue was initially reported and fixed by Ben Pedell for
RN102. The RN104 shares the same Hynix H27U1G8F2BTR NAND
flash and setup. This patch is based on Ben's fix for RN102.

Fixes: 0373a558

 ("ARM: mvebu: Enable NAND controller in ReadyNAS 104 .dts file")
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: default avatarArnaud Ebalard <arno@natisbad.org>
Link: https://lkml.kernel.org/r/920c7e7169dc6aaaa3eb4bced2336d38e77b8864.1410035142.git.arno@natisbad.org

Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent 6c8df11d
...@@ -145,6 +145,10 @@ ...@@ -145,6 +145,10 @@
marvell,nand-enable-arbiter; marvell,nand-enable-arbiter;
nand-on-flash-bbt; nand-on-flash-bbt;
/* Use Hardware BCH ECC */
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
partition@0 { partition@0 {
label = "u-boot"; label = "u-boot";
reg = <0x0000000 0x180000>; /* 1.5MB */ reg = <0x0000000 0x180000>; /* 1.5MB */
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment