Commit 1c773ea4 authored by Jayachandran C's avatar Jayachandran C Committed by Ralf Baechle

MIPS: Netlogic: Add XLP makefiles and config

- Add CPU_XLP and NLM_XLR_BOARD to arch/mips/Kconfig for Netlogic XLP boards
- Update mips Makefiles to add XLP
Signed-off-by: default avatarJayachandran C <jayachandranc@netlogicmicro.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2968/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 65040e22
......@@ -783,6 +783,33 @@ config NLM_XLR_BOARD
Support for systems based on Netlogic XLR and XLS processors.
Say Y here if you have a XLR or XLS based board.
config NLM_XLP_BOARD
bool "Netlogic XLP based systems"
depends on EXPERIMENTAL
select BOOT_ELF32
select NLM_COMMON
select SYS_HAS_CPU_XLP
select SYS_SUPPORTS_SMP
select HW_HAS_PCI
select SWAP_IO_SPACE
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select 64BIT_PHYS_ADDR
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select DMA_COHERENT
select NR_CPUS_DEFAULT_32
select CEVT_R4K
select CSRC_R4K
select IRQ_CPU
select ZONE_DMA if 64BIT
select SYNC_R4K
select SYS_HAS_EARLY_PRINTK
help
This board is based on Netlogic XLP Processor.
Say Y here if you have a XLP based board.
endchoice
source "arch/mips/alchemy/Kconfig"
......@@ -1472,6 +1499,19 @@ config CPU_XLR
select CPU_SUPPORTS_HUGEPAGES
help
Netlogic Microsystems XLR/XLS processors.
config CPU_XLP
bool "Netlogic XLP SoC"
depends on SYS_HAS_CPU_XLP
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_HAS_LLSC
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
select CPU_HAS_PREFETCH
help
Netlogic Microsystems XLP processors.
endchoice
if CPU_LOONGSON2F
......@@ -1605,6 +1645,9 @@ config SYS_HAS_CPU_BMIPS5000
config SYS_HAS_CPU_XLR
bool
config SYS_HAS_CPU_XLP
bool
#
# CPU may reorder R->R, R->W, W->R, W->W
# Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
......
......@@ -55,6 +55,7 @@ obj-$(CONFIG_CPU_TX49XX) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_VR41XX) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += octeon_switch.o
obj-$(CONFIG_CPU_XLR) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_XLP) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_SMP_UP) += smp-up.o
......
......@@ -29,6 +29,7 @@ obj-$(CONFIG_CPU_TX49XX) += dump_tlb.o
obj-$(CONFIG_CPU_VR41XX) += dump_tlb.o
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += dump_tlb.o
obj-$(CONFIG_CPU_XLR) += dump_tlb.o
obj-$(CONFIG_CPU_XLP) += dump_tlb.o
# libgcc-style stuff needed in the kernel
obj-y += ashldi3.o ashrdi3.o cmpdi2.o lshrdi3.o ucmpdi2.o
......@@ -31,6 +31,7 @@ obj-$(CONFIG_CPU_TX49XX) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_VR41XX) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += c-octeon.o cex-oct.o tlb-r4k.o
obj-$(CONFIG_CPU_XLR) += c-r4k.o tlb-r4k.o cex-gen.o
obj-$(CONFIG_CPU_XLP) += c-r4k.o tlb-r4k.o cex-gen.o
obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o
obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o
......
obj-$(CONFIG_NLM_COMMON) += common/
obj-$(CONFIG_CPU_XLR) += xlr/
obj-$(CONFIG_CPU_XLP) += xlp/
......@@ -8,6 +8,7 @@ cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/netlogic
# use mips64 if xlr is not available
#
cflags-$(CONFIG_CPU_XLR) += $(call cc-option,-march=xlr,-march=mips64)
cflags-$(CONFIG_CPU_XLP) += $(call cc-option,-march=xlp,-march=mips64r2)
#
# NETLOGIC processor support
......
obj-y += setup.o platform.o nlm_hal.o
obj-$(CONFIG_SMP) += smpboot.o wakeup.o
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment