Commit 1c1093a4 authored by Matthew Vick's avatar Matthew Vick Committed by Jeff Kirsher
Browse files

e1000e: Disable Far-End LoopBack following reset on 80003ES2LAN.



80003ES2LAN has an errata such that far-end loopback may be activated by
bit errors producing a reserved symbol. In order to disable far-end
loopback quickly enough, disable it immediately following a reset.
Signed-off-by: default avatarMatthew Vick <matthew.vick@intel.com>
Tested-by: default avatarJeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 82981930
......@@ -764,6 +764,7 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
{
u32 ctrl;
s32 ret_val;
u16 kum_reg_data;
/*
* Prevent the PCI-E bus from sticking if there is no TLP connection
......@@ -789,6 +790,13 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
ew32(CTRL, ctrl | E1000_CTRL_RST);
e1000_release_phy_80003es2lan(hw);
/* Disable IBIST slave mode (far-end loopback) */
e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
&kum_reg_data);
kum_reg_data |= E1000_KMRNCTRLSTA_IBIST_DISABLE;
e1000_write_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
kum_reg_data);
ret_val = e1000e_get_auto_rd_done(hw);
if (ret_val)
/* We don't want to continue accessing MAC registers. */
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment