Commit 1a6e5d7c authored by Sujith Manoharan's avatar Sujith Manoharan Committed by John W. Linville
Browse files

ath9k_hw: Remove TEMP_COMP_CAL



This is not enabled for any chip and is unused.
Signed-off-by: default avatarSujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent b686929c
......@@ -32,7 +32,6 @@ struct coeff {
enum ar9003_cal_types {
IQ_MISMATCH_CAL = BIT(0),
TEMP_COMP_CAL = BIT(1),
};
static void ar9003_hw_setup_calibration(struct ath_hw *ah,
......@@ -49,7 +48,7 @@ static void ar9003_hw_setup_calibration(struct ath_hw *ah,
*/
REG_RMW_FIELD(ah, AR_PHY_TIMING4,
AR_PHY_TIMING4_IQCAL_LOG_COUNT_MAX,
currCal->calData->calCountMax);
currCal->calData->calCountMax);
REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_IQ);
ath_dbg(common, CALIBRATE,
......@@ -58,14 +57,8 @@ static void ar9003_hw_setup_calibration(struct ath_hw *ah,
/* Kick-off cal */
REG_SET_BIT(ah, AR_PHY_TIMING4, AR_PHY_TIMING4_DO_CAL);
break;
case TEMP_COMP_CAL:
REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_THERM,
AR_PHY_65NM_CH0_THERM_LOCAL, 1);
REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_THERM,
AR_PHY_65NM_CH0_THERM_START, 1);
ath_dbg(common, CALIBRATE,
"starting Temperature Compensation Calibration\n");
default:
ath_err(common, "Invalid calibration type\n");
break;
}
}
......@@ -1144,13 +1137,6 @@ skip_tx_iqcal:
INSERT_CAL(ah, &ah->iq_caldata);
ath_dbg(common, CALIBRATE, "enabling IQ Calibration\n");
if (ah->supp_cals & TEMP_COMP_CAL) {
INIT_CAL(&ah->tempCompCalData);
INSERT_CAL(ah, &ah->tempCompCalData);
ath_dbg(common, CALIBRATE,
"enabling Temperature Compensation Calibration\n");
}
/* Initialize current pointer to first element in list */
ah->cal_list_curr = ah->cal_list;
......
......@@ -768,7 +768,6 @@ struct ath_hw {
struct ath9k_cal_list iq_caldata;
struct ath9k_cal_list adcgain_caldata;
struct ath9k_cal_list adcdc_caldata;
struct ath9k_cal_list tempCompCalData;
struct ath9k_cal_list *cal_list;
struct ath9k_cal_list *cal_list_last;
struct ath9k_cal_list *cal_list_curr;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment