Commit 14c6b5e7 authored by Eric Miao's avatar Eric Miao
Browse files

[ARM] pxa: add base support for Marvell PXA910


Signed-off-by: default avatarBin Yang <bin.yang@marvell.com>
Signed-off-by: default avatarEric Miao <eric.miao@marvell.com>
parent a6b993c6
......@@ -488,7 +488,7 @@ config ARCH_PXA
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
config ARCH_MMP
bool "Marvell PXA168"
bool "Marvell PXA168/910"
depends on MMU
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
......@@ -499,7 +499,7 @@ config ARCH_MMP
select TICK_ONESHOT
select PLAT_PXA
help
Support for Marvell's PXA168 processor line.
Support for Marvell's PXA168/910 processor line.
config ARCH_RPC
bool "RiscPC"
......
if ARCH_MMP
menu "Marvell PXA168 Implmentations"
menu "Marvell PXA168/910 Implmentations"
config MACH_ASPENITE
bool "Marvell's PXA168 Aspenite Development Board"
......@@ -24,4 +24,10 @@ config CPU_PXA168
help
Select code specific to PXA168
config CPU_PXA910
bool
select CPU_MOHAWK
help
Select code specific to PXA910
endif
......@@ -6,6 +6,7 @@ obj-y += common.o clock.o devices.o irq.o time.o
# SoC support
obj-$(CONFIG_CPU_PXA168) += pxa168.o
obj-$(CONFIG_CPU_PXA910) += pxa910.o
# board support
obj-$(CONFIG_MACH_ASPENITE) += aspenite.o
......
......@@ -5,7 +5,9 @@ struct sys_timer;
extern void timer_init(int irq);
extern struct sys_timer pxa168_timer;
extern struct sys_timer pxa910_timer;
extern void __init pxa168_init_irq(void);
extern void __init pxa910_init_irq(void);
extern void __init icu_init_irq(void);
extern void __init pxa_map_io(void);
......@@ -7,6 +7,7 @@
* CPU Stepping OLD_ID CPU_ID CHIP_ID
*
* PXA168 A0 0x41159263 0x56158400 0x00A0A333
* PXA910 Y0 0x41159262 0x56158000 0x00F0C910
*/
#ifdef CONFIG_CPU_PXA168
......@@ -16,6 +17,14 @@
# define __cpu_is_pxa168(id) (0)
#endif
#ifdef CONFIG_CPU_PXA910
# define __cpu_is_pxa910(id) \
({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x80; })
#else
# define __cpu_is_pxa910(id) (0)
#endif
#define cpu_is_pxa168() ({ __cpu_is_pxa168(read_cpuid_id()); })
#define cpu_is_pxa910() ({ __cpu_is_pxa910(read_cpuid_id()); })
#endif /* __ASM_MACH_CPUTYPE_H */
......@@ -24,4 +24,14 @@ struct pxa_device_desc pxa168_device_##_name __initdata = { \
.dma = { _dma }, \
};
#define PXA910_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...) \
struct pxa_device_desc pxa910_device_##_name __initdata = { \
.dev_name = "pxa910-" #_name, \
.drv_name = _drv, \
.id = _id, \
.irq = IRQ_PXA910_##_irq, \
.start = _start, \
.size = _size, \
.dma = { _dma }, \
};
extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
......@@ -49,6 +49,67 @@
#define IRQ_PXA168_PMU 60
#define IRQ_PXA168_SM_INT 63
/*
* Interrupt numbers for PXA910
*/
#define IRQ_PXA910_AIRQ 0
#define IRQ_PXA910_SSP3 1
#define IRQ_PXA910_SSP2 2
#define IRQ_PXA910_SSP1 3
#define IRQ_PXA910_PMIC_INT 4
#define IRQ_PXA910_RTC_INT 5
#define IRQ_PXA910_RTC_ALARM 6
#define IRQ_PXA910_TWSI0 7
#define IRQ_PXA910_GPU 8
#define IRQ_PXA910_KEYPAD 9
#define IRQ_PXA910_ROTARY 10
#define IRQ_PXA910_TRACKBALL 11
#define IRQ_PXA910_ONEWIRE 12
#define IRQ_PXA910_AP1_TIMER1 13
#define IRQ_PXA910_AP1_TIMER2 14
#define IRQ_PXA910_AP1_TIMER3 15
#define IRQ_PXA910_IPC_AP0 16
#define IRQ_PXA910_IPC_AP1 17
#define IRQ_PXA910_IPC_AP2 18
#define IRQ_PXA910_IPC_AP3 19
#define IRQ_PXA910_IPC_AP4 20
#define IRQ_PXA910_IPC_CP0 21
#define IRQ_PXA910_IPC_CP1 22
#define IRQ_PXA910_IPC_CP2 23
#define IRQ_PXA910_IPC_CP3 24
#define IRQ_PXA910_IPC_CP4 25
#define IRQ_PXA910_L2_DDR 26
#define IRQ_PXA910_UART2 27
#define IRQ_PXA910_UART3 28
#define IRQ_PXA910_AP2_TIMER1 29
#define IRQ_PXA910_AP2_TIMER2 30
#define IRQ_PXA910_CP2_TIMER1 31
#define IRQ_PXA910_CP2_TIMER2 32
#define IRQ_PXA910_CP2_TIMER3 33
#define IRQ_PXA910_GSSP 34
#define IRQ_PXA910_CP2_WDT 35
#define IRQ_PXA910_MAIN_PMU 36
#define IRQ_PXA910_CP_FREQ_CHG 37
#define IRQ_PXA910_AP_FREQ_CHG 38
#define IRQ_PXA910_MMC 39
#define IRQ_PXA910_AEU 40
#define IRQ_PXA910_LCD 41
#define IRQ_PXA910_CCIC 42
#define IRQ_PXA910_IRE 43
#define IRQ_PXA910_USB1 44
#define IRQ_PXA910_NAND 45
#define IRQ_PXA910_HIFI_DMA 46
#define IRQ_PXA910_DMA_INT0 47
#define IRQ_PXA910_DMA_INT1 48
#define IRQ_PXA910_AP_GPIO 49
#define IRQ_PXA910_AP2_TIMER3 50
#define IRQ_PXA910_USB2 51
#define IRQ_PXA910_TWSI1 54
#define IRQ_PXA910_CP_GPIO 55
#define IRQ_PXA910_UART1 59 /* Slow UART */
#define IRQ_PXA910_AP_PMU 60
#define IRQ_PXA910_SM_INT 63 /* from PinMux */
#define IRQ_GPIO_START 64
#define IRQ_GPIO_NUM 128
#define IRQ_GPIO(x) (IRQ_GPIO_START + (x))
......
#ifndef __ASM_MACH_MFP_PXA910_H
#define __ASM_MACH_MFP_PXA910_H
#include <mach/mfp.h>
/* UART2 */
#define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF6)
#define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF6)
/* UART3 */
#define GPIO31_UART3_RXD MFP_CFG(GPIO31, AF4)
#define GPIO32_UART3_TXD MFP_CFG(GPIO32, AF4)
/*IRDA*/
#define GPIO51_IRDA_SHDN MFP_CFG(GPIO51, AF0)
/* SMC */
#define SM_nCS0_nCS0 MFP_CFG(SM_nCS0, AF0)
#define SM_ADV_SM_ADV MFP_CFG(SM_ADV, AF0)
#define SM_SCLK_SM_SCLK MFP_CFG(SM_SCLK, AF0)
#define SM_SCLK_SM_SCLK MFP_CFG(SM_SCLK, AF0)
#define SM_BE0_SM_BE0 MFP_CFG(SM_BE0, AF1)
#define SM_BE1_SM_BE1 MFP_CFG(SM_BE1, AF1)
/* I2C */
#define GPIO53_CI2C_SCL MFP_CFG(GPIO53, AF2)
#define GPIO54_CI2C_SDA MFP_CFG(GPIO54, AF2)
/* SSP1 (I2S) */
#define GPIO24_SSP1_SDATA_IN MFP_CFG_DRV(GPIO24, AF1, MEDIUM)
#define GPIO21_SSP1_BITCLK MFP_CFG_DRV(GPIO21, AF1, MEDIUM)
#define GPIO20_SSP1_SYSCLK MFP_CFG_DRV(GPIO20, AF1, MEDIUM)
#define GPIO22_SSP1_SYNC MFP_CFG_DRV(GPIO22, AF1, MEDIUM)
#define GPIO23_SSP1_DATA_OUT MFP_CFG_DRV(GPIO23, AF1, MEDIUM)
#define GPIO124_MN_CLK_OUT MFP_CFG_DRV(GPIO124, AF1, MEDIUM)
#define GPIO123_CLK_REQ MFP_CFG_DRV(GPIO123, AF0, MEDIUM)
/* DFI */
#define DF_IO0_ND_IO0 MFP_CFG(DF_IO0, AF0)
#define DF_IO1_ND_IO1 MFP_CFG(DF_IO1, AF0)
#define DF_IO2_ND_IO2 MFP_CFG(DF_IO2, AF0)
#define DF_IO3_ND_IO3 MFP_CFG(DF_IO3, AF0)
#define DF_IO4_ND_IO4 MFP_CFG(DF_IO4, AF0)
#define DF_IO5_ND_IO5 MFP_CFG(DF_IO5, AF0)
#define DF_IO6_ND_IO6 MFP_CFG(DF_IO6, AF0)
#define DF_IO7_ND_IO7 MFP_CFG(DF_IO7, AF0)
#define DF_IO8_ND_IO8 MFP_CFG(DF_IO8, AF0)
#define DF_IO9_ND_IO9 MFP_CFG(DF_IO9, AF0)
#define DF_IO10_ND_IO10 MFP_CFG(DF_IO10, AF0)
#define DF_IO11_ND_IO11 MFP_CFG(DF_IO11, AF0)
#define DF_IO12_ND_IO12 MFP_CFG(DF_IO12, AF0)
#define DF_IO13_ND_IO13 MFP_CFG(DF_IO13, AF0)
#define DF_IO14_ND_IO14 MFP_CFG(DF_IO14, AF0)
#define DF_IO15_ND_IO15 MFP_CFG(DF_IO15, AF0)
#define DF_nCS0_SM_nCS2_nCS0 MFP_CFG(DF_nCS0_SM_nCS2, AF0)
#define DF_ALE_SM_WEn_ND_ALE MFP_CFG(DF_ALE_SM_WEn, AF1)
#define DF_CLE_SM_OEn_ND_CLE MFP_CFG(DF_CLE_SM_OEn, AF0)
#define DF_WEn_DF_WEn MFP_CFG(DF_WEn, AF1)
#define DF_REn_DF_REn MFP_CFG(DF_REn, AF1)
#define DF_RDY0_DF_RDY0 MFP_CFG(DF_RDY0, AF0)
/*keypad*/
#define GPIO00_KP_MKIN0 MFP_CFG(GPIO0, AF1)
#define GPIO01_KP_MKOUT0 MFP_CFG(GPIO1, AF1)
#define GPIO02_KP_MKIN1 MFP_CFG(GPIO2, AF1)
#define GPIO03_KP_MKOUT1 MFP_CFG(GPIO3, AF1)
#define GPIO04_KP_MKIN2 MFP_CFG(GPIO4, AF1)
#define GPIO05_KP_MKOUT2 MFP_CFG(GPIO5, AF1)
#define GPIO06_KP_MKIN3 MFP_CFG(GPIO6, AF1)
#define GPIO07_KP_MKOUT3 MFP_CFG(GPIO7, AF1)
#define GPIO08_KP_MKIN4 MFP_CFG(GPIO8, AF1)
#define GPIO09_KP_MKOUT4 MFP_CFG(GPIO9, AF1)
#define GPIO10_KP_MKIN5 MFP_CFG(GPIO10, AF1)
#define GPIO11_KP_MKOUT5 MFP_CFG(GPIO11, AF1)
#define GPIO12_KP_MKIN6 MFP_CFG(GPIO12, AF1)
#define GPIO13_KP_MKOUT6 MFP_CFG(GPIO13, AF1)
#define GPIO14_KP_MKIN7 MFP_CFG(GPIO14, AF1)
#define GPIO15_KP_MKOUT7 MFP_CFG(GPIO15, AF1)
#define GPIO16_KP_DKIN0 MFP_CFG(GPIO16, AF1)
#define GPIO17_KP_DKIN1 MFP_CFG(GPIO17, AF1)
#define GPIO18_KP_DKIN2 MFP_CFG(GPIO18, AF1)
#define GPIO19_KP_DKIN3 MFP_CFG(GPIO19, AF1)
/* LCD */
#define GPIO81_LCD_FCLK MFP_CFG(GPIO81, AF1)
#define GPIO82_LCD_LCLK MFP_CFG(GPIO82, AF1)
#define GPIO83_LCD_PCLK MFP_CFG(GPIO83, AF1)
#define GPIO84_LCD_DENA MFP_CFG(GPIO84, AF1)
#define GPIO85_LCD_DD0 MFP_CFG(GPIO85, AF1)
#define GPIO86_LCD_DD1 MFP_CFG(GPIO86, AF1)
#define GPIO87_LCD_DD2 MFP_CFG(GPIO87, AF1)
#define GPIO88_LCD_DD3 MFP_CFG(GPIO88, AF1)
#define GPIO89_LCD_DD4 MFP_CFG(GPIO89, AF1)
#define GPIO90_LCD_DD5 MFP_CFG(GPIO90, AF1)
#define GPIO91_LCD_DD6 MFP_CFG(GPIO91, AF1)
#define GPIO92_LCD_DD7 MFP_CFG(GPIO92, AF1)
#define GPIO93_LCD_DD8 MFP_CFG(GPIO93, AF1)
#define GPIO94_LCD_DD9 MFP_CFG(GPIO94, AF1)
#define GPIO95_LCD_DD10 MFP_CFG(GPIO95, AF1)
#define GPIO96_LCD_DD11 MFP_CFG(GPIO96, AF1)
#define GPIO97_LCD_DD12 MFP_CFG(GPIO97, AF1)
#define GPIO98_LCD_DD13 MFP_CFG(GPIO98, AF1)
#define GPIO100_LCD_DD14 MFP_CFG(GPIO100, AF1)
#define GPIO101_LCD_DD15 MFP_CFG(GPIO101, AF1)
#define GPIO102_LCD_DD16 MFP_CFG(GPIO102, AF1)
#define GPIO103_LCD_DD17 MFP_CFG(GPIO103, AF1)
#define GPIO104_LCD_DD18 MFP_CFG(GPIO104, AF1)
#define GPIO105_LCD_DD19 MFP_CFG(GPIO105, AF1)
#define GPIO106_LCD_DD20 MFP_CFG(GPIO106, AF1)
#define GPIO107_LCD_DD21 MFP_CFG(GPIO107, AF1)
#define GPIO108_LCD_DD22 MFP_CFG(GPIO108, AF1)
#define GPIO109_LCD_DD23 MFP_CFG(GPIO109, AF1)
#define GPIO104_LCD_SPIDOUT MFP_CFG(GPIO104, AF3)
#define GPIO105_LCD_SPIDIN MFP_CFG(GPIO105, AF3)
#define GPIO107_LCD_CS1 MFP_CFG(GPIO107, AF3)
#define GPIO108_LCD_DCLK MFP_CFG(GPIO108, AF3)
#define GPIO106_LCD_RESET MFP_CFG(GPIO106, AF0)
/*smart panel*/
#define GPIO82_LCD_A0 MFP_CFG(GPIO82, AF0)
#define GPIO83_LCD_WR MFP_CFG(GPIO83, AF0)
#define GPIO103_LCD_CS MFP_CFG(GPIO103, AF0)
/*1wire*/
#define GPIO106_1WIRE MFP_CFG(GPIO106, AF3)
/*CCIC*/
#define GPIO67_CCIC_IN7 MFP_CFG_DRV(GPIO67, AF1, MEDIUM)
#define GPIO68_CCIC_IN6 MFP_CFG_DRV(GPIO68, AF1, MEDIUM)
#define GPIO69_CCIC_IN5 MFP_CFG_DRV(GPIO69, AF1, MEDIUM)
#define GPIO70_CCIC_IN4 MFP_CFG_DRV(GPIO70, AF1, MEDIUM)
#define GPIO71_CCIC_IN3 MFP_CFG_DRV(GPIO71, AF1, MEDIUM)
#define GPIO72_CCIC_IN2 MFP_CFG_DRV(GPIO72, AF1, MEDIUM)
#define GPIO73_CCIC_IN1 MFP_CFG_DRV(GPIO73, AF1, MEDIUM)
#define GPIO74_CCIC_IN0 MFP_CFG_DRV(GPIO74, AF1, MEDIUM)
#define GPIO75_CAM_HSYNC MFP_CFG_DRV(GPIO75, AF1, MEDIUM)
#define GPIO76_CAM_VSYNC MFP_CFG_DRV(GPIO76, AF1, MEDIUM)
#define GPIO77_CAM_MCLK MFP_CFG_DRV(GPIO77, AF1, MEDIUM)
#define GPIO78_CAM_PCLK MFP_CFG_DRV(GPIO78, AF1, MEDIUM)
/* MMC1 */
#define MMC1_DAT7_MMC1_DAT7 MFP_CFG_DRV(MMC1_DAT7, AF0, MEDIUM)
#define MMC1_DAT6_MMC1_DAT6 MFP_CFG_DRV(MMC1_DAT6, AF0, MEDIUM)
#define MMC1_DAT5_MMC1_DAT5 MFP_CFG_DRV(MMC1_DAT5, AF0, MEDIUM)
#define MMC1_DAT4_MMC1_DAT4 MFP_CFG_DRV(MMC1_DAT4, AF0, MEDIUM)
#define MMC1_DAT3_MMC1_DAT3 MFP_CFG_DRV(MMC1_DAT3, AF0, MEDIUM)
#define MMC1_DAT2_MMC1_DAT2 MFP_CFG_DRV(MMC1_DAT2, AF0, MEDIUM)
#define MMC1_DAT1_MMC1_DAT1 MFP_CFG_DRV(MMC1_DAT1, AF0, MEDIUM)
#define MMC1_DAT0_MMC1_DAT0 MFP_CFG_DRV(MMC1_DAT0, AF0, MEDIUM)
#define MMC1_CMD_MMC1_CMD MFP_CFG_DRV(MMC1_CMD, AF0, MEDIUM)
#define MMC1_CLK_MMC1_CLK MFP_CFG_DRV(MMC1_CLK, AF0, MEDIUM)
#define MMC1_CD_MMC1_CD MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM)
#define MMC1_WP_MMC1_WP MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
#endif /* __ASM_MACH MFP_PXA910_H */
#ifndef __ASM_MACH_PXA910_H
#define __ASM_MACH_PXA910_H
#include <mach/devices.h>
extern struct pxa_device_desc pxa910_device_uart1;
extern struct pxa_device_desc pxa910_device_uart2;
static inline int pxa910_add_uart(int id)
{
struct pxa_device_desc *d = NULL;
switch (id) {
case 1: d = &pxa910_device_uart1; break;
case 2: d = &pxa910_device_uart2; break;
}
if (d == NULL)
return -EINVAL;
return pxa_register_device(d, NULL, 0);
}
#endif /* __ASM_MACH_PXA910_H */
......@@ -42,6 +42,31 @@
#define APBC_PXA168_UART3 APBC_REG(0x070)
#define APBC_PXA168_AC97 APBC_REG(0x084)
/*
* APB Clock register offsets for PXA910
*/
#define APBC_PXA910_UART0 APBC_REG(0x000)
#define APBC_PXA910_UART1 APBC_REG(0x004)
#define APBC_PXA910_GPIO APBC_REG(0x008)
#define APBC_PXA910_PWM0 APBC_REG(0x00c)
#define APBC_PXA910_PWM1 APBC_REG(0x010)
#define APBC_PXA910_PWM2 APBC_REG(0x014)
#define APBC_PXA910_PWM3 APBC_REG(0x018)
#define APBC_PXA910_SSP1 APBC_REG(0x01c)
#define APBC_PXA910_SSP2 APBC_REG(0x020)
#define APBC_PXA910_IPC APBC_REG(0x024)
#define APBC_PXA910_TWSI0 APBC_REG(0x02c)
#define APBC_PXA910_KPC APBC_REG(0x030)
#define APBC_PXA910_TIMERS APBC_REG(0x034)
#define APBC_PXA910_TBROT APBC_REG(0x038)
#define APBC_PXA910_AIB APBC_REG(0x03c)
#define APBC_PXA910_SW_JTAG APBC_REG(0x040)
#define APBC_PXA910_TIMERS1 APBC_REG(0x044)
#define APBC_PXA910_ONEWIRE APBC_REG(0x048)
#define APBC_PXA910_SSP3 APBC_REG(0x04c)
#define APBC_PXA910_ASFAR APBC_REG(0x050)
#define APBC_PXA910_ASSAR APBC_REG(0x054)
/* Common APB clock register bit definitions */
#define APBC_APBCLK (1 << 0) /* APB Bus Clock Enable */
#define APBC_FNCLK (1 << 1) /* Functional Clock Enable */
......
/*
* linux/arch/arm/mach-mmp/pxa910.c
*
* Code specific to PXA910
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
#include <asm/mach/time.h>
#include <mach/addr-map.h>
#include <mach/regs-apbc.h>
#include <mach/regs-apmu.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/gpio.h>
#include <mach/dma.h>
#include <mach/mfp.h>
#include <mach/devices.h>
#include "common.h"
#include "clock.h"
#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
{
MFP_ADDR_X(GPIO0, GPIO54, 0xdc),
MFP_ADDR_X(GPIO67, GPIO98, 0x1b8),
MFP_ADDR_X(GPIO100, GPIO109, 0x238),
MFP_ADDR(GPIO123, 0xcc),
MFP_ADDR(GPIO124, 0xd0),
MFP_ADDR(DF_IO0, 0x40),
MFP_ADDR(DF_IO1, 0x3c),
MFP_ADDR(DF_IO2, 0x38),
MFP_ADDR(DF_IO3, 0x34),
MFP_ADDR(DF_IO4, 0x30),
MFP_ADDR(DF_IO5, 0x2c),
MFP_ADDR(DF_IO6, 0x28),
MFP_ADDR(DF_IO7, 0x24),
MFP_ADDR(DF_IO8, 0x20),
MFP_ADDR(DF_IO9, 0x1c),
MFP_ADDR(DF_IO10, 0x18),
MFP_ADDR(DF_IO11, 0x14),
MFP_ADDR(DF_IO12, 0x10),
MFP_ADDR(DF_IO13, 0xc),
MFP_ADDR(DF_IO14, 0x8),
MFP_ADDR(DF_IO15, 0x4),
MFP_ADDR(DF_nCS0_SM_nCS2, 0x44),
MFP_ADDR(DF_nCS1_SM_nCS3, 0x48),
MFP_ADDR(SM_nCS0, 0x4c),
MFP_ADDR(SM_nCS1, 0x50),
MFP_ADDR(DF_WEn, 0x54),
MFP_ADDR(DF_REn, 0x58),
MFP_ADDR(DF_CLE_SM_OEn, 0x5c),
MFP_ADDR(DF_ALE_SM_WEn, 0x60),
MFP_ADDR(SM_SCLK, 0x64),
MFP_ADDR(DF_RDY0, 0x68),
MFP_ADDR(SM_BE0, 0x6c),
MFP_ADDR(SM_BE1, 0x70),
MFP_ADDR(SM_ADV, 0x74),
MFP_ADDR(DF_RDY1, 0x78),
MFP_ADDR(SM_ADVMUX, 0x7c),
MFP_ADDR(SM_RDY, 0x80),
MFP_ADDR_X(MMC1_DAT7, MMC1_WP, 0x84),
MFP_ADDR_END,
};
#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
static void __init pxa910_init_gpio(void)
{
int i;
/* enable GPIO clock */
__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA910_GPIO);
/* unmask GPIO edge detection for all 4 banks - APMASKx */
for (i = 0; i < 4; i++)
__raw_writel(0xffffffff, APMASK(i));
pxa_init_gpio(IRQ_PXA910_AP_GPIO, 0, 127, NULL);
}
void __init pxa910_init_irq(void)
{
icu_init_irq();
pxa910_init_gpio();
}
/* APB peripheral clocks */
static APBC_CLK(uart1, PXA910_UART0, 1, 14745600);
static APBC_CLK(uart2, PXA910_UART1, 1, 14745600);
/* device and clock bindings */
static struct clk_lookup pxa910_clkregs[] = {
INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
};
static int __init pxa910_init(void)
{
if (cpu_is_pxa910()) {
mfp_init_base(MFPR_VIRT_BASE);
mfp_init_addr(pxa910_mfp_addr_map);
pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
clks_register(ARRAY_AND_SIZE(pxa910_clkregs));
}
return 0;
}
postcore_initcall(pxa910_init);
/* system timer - clock enabled, 3.25MHz */
#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
static void __init pxa910_timer_init(void)
{
/* reset and configure */
__raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA910_TIMERS);
__raw_writel(TIMER_CLK_RST, APBC_PXA910_TIMERS);
timer_init(IRQ_PXA910_AP1_TIMER1);
}
struct sys_timer pxa910_timer = {
.init = pxa910_timer_init,
};
/* on-chip devices */
/* NOTE: there are totally 3 UARTs on PXA910:
*
* UART1 - Slow UART (can be used both by AP and CP)
* UART2/3 - Fast UART
*
* To be backward compatible with the legacy FFUART/BTUART/STUART sequence,
* they are re-ordered as:
*
* pxa910_device_uart1 - UART2 as FFUART
* pxa910_device_uart2 - UART3 as BTUART
*
* UART1 is not used by AP for the moment.
*/
PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
......@@ -209,6 +209,36 @@ enum {
MFP_PIN_DF_IO13,
MFP_PIN_DF_IO14,
MFP_PIN_DF_IO15,
MFP_PIN_DF_nCS0_SM_nCS2,
MFP_PIN_DF_nCS1_SM_nCS3,
MFP_PIN_SM_nCS0,
MFP_PIN_SM_nCS1,
MFP_PIN_DF_WEn,
MFP_PIN_DF_REn,
MFP_PIN_DF_CLE_SM_OEn,
MFP_PIN_DF_ALE_SM_WEn,
MFP_PIN_DF_RDY0,
MFP_PIN_DF_RDY1,
MFP_PIN_SM_SCLK,
MFP_PIN_SM_BE0,
MFP_PIN_SM_BE1,
MFP_PIN_SM_ADV,
MFP_PIN_SM_ADVMUX,
MFP_PIN_SM_RDY,
MFP_PIN_MMC1_DAT7,
MFP_PIN_MMC1_DAT6,
MFP_PIN_MMC1_DAT5,
MFP_PIN_MMC1_DAT4,
MFP_PIN_MMC1_DAT3,
MFP_PIN_MMC1_DAT2,
MFP_PIN_MMC1_DAT1,
MFP_PIN_MMC1_DAT0,
MFP_PIN_MMC1_CMD,
MFP_PIN_MMC1_CLK,
MFP_PIN_MMC1_CD,
MFP_PIN_MMC1_WP,
/* additional pins on PXA930 */
MFP_PIN_GSIM_UIO,
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment