diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 2ba6d3a40e2ee5b2caf4347324a93a74a6665b44..b79ec0d7480fa9c411fd723cb93b13c5a47f344b 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -56,5 +56,22 @@ config SMSC_PHY
---help---
Currently supports the LAN83C185 PHY
+config FIXED_PHY
+ tristate "Drivers for PHY emulation on fixed speed/link"
+ depends on PHYLIB
+ ---help---
+ Adds the driver to PHY layer to cover the boards that do not have any PHY bound,
+ but with the ability to manipulate with speed/link in software. The relavant MII
+ speed/duplex parameters could be effectively handled in user-specified fuction.
+ Currently tested with mpc866ads.
+
+config FIXED_MII_10_FDX
+ bool "Emulation for 10M Fdx fixed PHY behavior"
+ depends on FIXED_PHY
+
+config FIXED_MII_100_FDX
+ bool "Emulation for 100M Fdx fixed PHY behavior"
+ depends on FIXED_PHY
+
endmenu
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index a00e61942525aa0d8eed8b02552b31efa38fa27f..320f8323123fbb291c280575ecb4c403ef8476b5 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_LXT_PHY) += lxt.o
obj-$(CONFIG_QSEMI_PHY) += qsemi.o
obj-$(CONFIG_SMSC_PHY) += smsc.o
obj-$(CONFIG_VITESSE_PHY) += vitesse.o
+obj-$(CONFIG_FIXED_PHY) += fixed.o
diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
new file mode 100644
index 0000000000000000000000000000000000000000..341036df471069f72289cb8aa5d0074f22e5b919
--- /dev/null
+++ b/drivers/net/phy/fixed.c
@@ -0,0 +1,358 @@
+/*
+ * drivers/net/phy/fixed.c
+ *
+ * Driver for fixed PHYs, when transceiver is able to operate in one fixed mode.
+ *
+ * Author: Vitaly Bordug
+ *
+ * Copyright (c) 2006 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#define MII_REGS_NUM 7
+
+/*
+ The idea is to emulate normal phy behavior by responding with
+ pre-defined values to mii BMCR read, so that read_status hook could
+ take all the needed info.
+*/
+
+struct fixed_phy_status {
+ u8 link;
+ u16 speed;
+ u8 duplex;
+};
+
+/*-----------------------------------------------------------------------------
+ * Private information hoder for mii_bus
+ *-----------------------------------------------------------------------------*/
+struct fixed_info {
+ u16 *regs;
+ u8 regs_num;
+ struct fixed_phy_status phy_status;
+ struct phy_device *phydev; /* pointer to the container */
+ /* link & speed cb */
+ int(*link_update)(struct net_device*, struct fixed_phy_status*);
+
+};
+
+/*-----------------------------------------------------------------------------
+ * If something weird is required to be done with link/speed,
+ * network driver is able to assign a function to implement this.
+ * May be useful for PHY's that need to be software-driven.
+ *-----------------------------------------------------------------------------*/
+int fixed_mdio_set_link_update(struct phy_device* phydev,
+ int(*link_update)(struct net_device*, struct fixed_phy_status*))
+{
+ struct fixed_info *fixed;
+
+ if(link_update == NULL)
+ return -EINVAL;
+
+ if(phydev) {
+ if(phydev->bus) {
+ fixed = phydev->bus->priv;
+ fixed->link_update = link_update;
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+EXPORT_SYMBOL(fixed_mdio_set_link_update);
+
+/*-----------------------------------------------------------------------------
+ * This is used for updating internal mii regs from the status
+ *-----------------------------------------------------------------------------*/
+static int fixed_mdio_update_regs(struct fixed_info *fixed)
+{
+ u16 *regs = fixed->regs;
+ u16 bmsr = 0;
+ u16 bmcr = 0;
+
+ if(!regs) {
+ printk(KERN_ERR "%s: regs not set up", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ if(fixed->phy_status.link)
+ bmsr |= BMSR_LSTATUS;
+
+ if(fixed->phy_status.duplex) {
+ bmcr |= BMCR_FULLDPLX;
+
+ switch ( fixed->phy_status.speed ) {
+ case 100:
+ bmsr |= BMSR_100FULL;
+ bmcr |= BMCR_SPEED100;
+ break;
+
+ case 10:
+ bmsr |= BMSR_10FULL;
+ break;
+ }
+ } else {
+ switch ( fixed->phy_status.speed ) {
+ case 100:
+ bmsr |= BMSR_100HALF;
+ bmcr |= BMCR_SPEED100;
+ break;
+
+ case 10:
+ bmsr |= BMSR_100HALF;
+ break;
+ }
+ }
+
+ regs[MII_BMCR] = bmcr;
+ regs[MII_BMSR] = bmsr | 0x800; /*we are always capable of 10 hdx*/
+
+ return 0;
+}
+
+static int fixed_mii_read(struct mii_bus *bus, int phy_id, int location)
+{
+ struct fixed_info *fixed = bus->priv;
+
+ /* if user has registered link update callback, use it */
+ if(fixed->phydev)
+ if(fixed->phydev->attached_dev) {
+ if(fixed->link_update) {
+ fixed->link_update(fixed->phydev->attached_dev,
+ &fixed->phy_status);
+ fixed_mdio_update_regs(fixed);
+ }
+ }
+
+ if ((unsigned int)location >= fixed->regs_num)
+ return -1;
+ return fixed->regs[location];
+}
+
+static int fixed_mii_write(struct mii_bus *bus, int phy_id, int location, u16 val)
+{
+ /* do nothing for now*/
+ return 0;
+}
+
+static int fixed_mii_reset(struct mii_bus *bus)
+{
+ /*nothing here - no way/need to reset it*/
+ return 0;
+}
+
+static int fixed_config_aneg(struct phy_device *phydev)
+{
+ /* :TODO:03/13/2006 09:45:37 PM::
+ The full autoneg funcionality can be emulated,
+ but no need to have anything here for now
+ */
+ return 0;
+}
+
+/*-----------------------------------------------------------------------------
+ * the manual bind will do the magic - with phy_id_mask == 0
+ * match will never return true...
+ *-----------------------------------------------------------------------------*/
+static struct phy_driver fixed_mdio_driver = {
+ .name = "Fixed PHY",
+ .features = PHY_BASIC_FEATURES,
+ .config_aneg = fixed_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+/*-----------------------------------------------------------------------------
+ * This func is used to create all the necessary stuff, bind
+ * the fixed phy driver and register all it on the mdio_bus_type.
+ * speed is either 10 or 100, duplex is boolean.
+ * number is used to create multiple fixed PHYs, so that several devices can
+ * utilize them simultaneously.
+ *-----------------------------------------------------------------------------*/
+static int fixed_mdio_register_device(int number, int speed, int duplex)
+{
+ struct mii_bus *new_bus;
+ struct fixed_info *fixed;
+ struct phy_device *phydev;
+ int err = 0;
+
+ struct device* dev = kzalloc(sizeof(struct device), GFP_KERNEL);
+
+ if (NULL == dev)
+ return -ENOMEM;
+
+ new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
+
+ if (NULL == new_bus) {
+ kfree(dev);
+ return -ENOMEM;
+ }
+ fixed = kzalloc(sizeof(struct fixed_info), GFP_KERNEL);
+
+ if (NULL == fixed) {
+ kfree(dev);
+ kfree(new_bus);
+ return -ENOMEM;
+ }
+
+ fixed->regs = kzalloc(MII_REGS_NUM*sizeof(int), GFP_KERNEL);
+ fixed->regs_num = MII_REGS_NUM;
+ fixed->phy_status.speed = speed;
+ fixed->phy_status.duplex = duplex;
+ fixed->phy_status.link = 1;
+
+ new_bus->name = "Fixed MII Bus",
+ new_bus->read = &fixed_mii_read,
+ new_bus->write = &fixed_mii_write,
+ new_bus->reset = &fixed_mii_reset,
+
+ /*set up workspace*/
+ fixed_mdio_update_regs(fixed);
+ new_bus->priv = fixed;
+
+ new_bus->dev = dev;
+ dev_set_drvdata(dev, new_bus);
+
+ /* create phy_device and register it on the mdio bus */
+ phydev = phy_device_create(new_bus, 0, 0);
+
+ /*
+ Put the phydev pointer into the fixed pack so that bus read/write code could
+ be able to access for instance attached netdev. Well it doesn't have to do
+ so, only in case of utilizing user-specified link-update...
+ */
+ fixed->phydev = phydev;
+
+ if(NULL == phydev) {
+ err = -ENOMEM;
+ goto device_create_fail;
+ }
+
+ phydev->irq = -1;
+ phydev->dev.bus = &mdio_bus_type;
+
+ if(number)
+ snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
+ "fixed_%d@%d:%d", number, speed, duplex);
+ else
+ snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
+ "fixed@%d:%d", speed, duplex);
+ phydev->bus = new_bus;
+
+ err = device_register(&phydev->dev);
+ if(err) {
+ printk(KERN_ERR "Phy %s failed to register\n",
+ phydev->dev.bus_id);
+ goto bus_register_fail;
+ }
+
+ /*
+ the mdio bus has phy_id match... In order not to do it
+ artificially, we are binding the driver here by hand;
+ it will be the same for all the fixed phys anyway.
+ */
+ down_write(&phydev->dev.bus->subsys.rwsem);
+
+ phydev->dev.driver = &fixed_mdio_driver.driver;
+
+ err = phydev->dev.driver->probe(&phydev->dev);
+ if(err < 0) {
+ printk(KERN_ERR "Phy %s: problems with fixed driver\n",phydev->dev.bus_id);
+ up_write(&phydev->dev.bus->subsys.rwsem);
+ goto probe_fail;
+ }
+
+ device_bind_driver(&phydev->dev);
+ up_write(&phydev->dev.bus->subsys.rwsem);
+
+ return 0;
+
+probe_fail:
+ device_unregister(&phydev->dev);
+bus_register_fail:
+ kfree(phydev);
+device_create_fail:
+ kfree(dev);
+ kfree(new_bus);
+ kfree(fixed);
+
+ return err;
+}
+
+
+MODULE_DESCRIPTION("Fixed PHY device & driver for PAL");
+MODULE_AUTHOR("Vitaly Bordug");
+MODULE_LICENSE("GPL");
+
+static int __init fixed_init(void)
+{
+ int ret;
+ int duplex = 0;
+
+ /* register on the bus... Not expected to be matched with anything there... */
+ phy_driver_register(&fixed_mdio_driver);
+
+ /* So let the fun begin...
+ We will create several mdio devices here, and will bound the upper
+ driver to them.
+
+ Then the external software can lookup the phy bus by searching
+ fixed@speed:duplex, e.g. fixed@100:1, to be connected to the
+ virtual 100M Fdx phy.
+
+ In case several virtual PHYs required, the bus_id will be in form
+ fixed_<num>@<speed>:<duplex>, which make it able even to define
+ driver-specific link control callback, if for instance PHY is completely
+ SW-driven.
+
+ */
+
+#ifdef CONFIG_FIXED_MII_DUPLEX
+ duplex = 1;
+#endif
+
+#ifdef CONFIG_FIXED_MII_100_FDX
+ fixed_mdio_register_device(0, 100, 1);
+#endif
+
+#ifdef CONFIX_FIXED_MII_10_FDX
+ fixed_mdio_register_device(0, 10, 1);
+#endif
+ return 0;
+}
+
+static void __exit fixed_exit(void)
+{
+ phy_driver_unregister(&fixed_mdio_driver);
+ /* :WARNING:02/18/2006 04:32:40 AM:: Cleanup all the created stuff */
+}
+
+module_init(fixed_init);
+module_exit(fixed_exit);
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 1dde390c164d9952e0324582a1f5e6c80bd64b6d..cf6660c93ffa57aeca305f53abe0a500ca38a0f4 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -159,6 +159,7 @@ struct bus_type mdio_bus_type = {
.suspend = mdio_bus_suspend,
.resume = mdio_bus_resume,
};
+EXPORT_SYMBOL(mdio_bus_type);
int __init mdio_bus_init(void)
{
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 1bc1e032c5d6c9654912b8b6cdef51658b88cb7d..2d1ecfdc80dbecbc5e345d4524803ecf49bba114 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -45,6 +45,35 @@ static struct phy_driver genphy_driver;
extern int mdio_bus_init(void);
extern void mdio_bus_exit(void);
+struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
+{
+ struct phy_device *dev;
+ /* We allocate the device, and initialize the
+ * default values */
+ dev = kcalloc(1, sizeof(*dev), GFP_KERNEL);
+
+ if (NULL == dev)
+ return (struct phy_device*) PTR_ERR((void*)-ENOMEM);
+
+ dev->speed = 0;
+ dev->duplex = -1;
+ dev->pause = dev->asym_pause = 0;
+ dev->link = 1;
+
+ dev->autoneg = AUTONEG_ENABLE;
+
+ dev->addr = addr;
+ dev->phy_id = phy_id;
+ dev->bus = bus;
+
+ dev->state = PHY_DOWN;
+
+ spin_lock_init(&dev->lock);
+
+ return dev;
+}
+EXPORT_SYMBOL(phy_device_create);
+
/* get_phy_device
*
* description: Reads the ID registers of the PHY at addr on the
@@ -78,27 +107,7 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
if (0xffffffff == phy_id)
return NULL;
- /* Otherwise, we allocate the device, and initialize the
- * default values */
- dev = kcalloc(1, sizeof(*dev), GFP_KERNEL);
-
- if (NULL == dev)
- return ERR_PTR(-ENOMEM);
-
- dev->speed = 0;
- dev->duplex = -1;
- dev->pause = dev->asym_pause = 0;
- dev->link = 1;
-
- dev->autoneg = AUTONEG_ENABLE;
-
- dev->addr = addr;
- dev->phy_id = phy_id;
- dev->bus = bus;
-
- dev->state = PHY_DOWN;
-
- spin_lock_init(&dev->lock);
+ dev = phy_device_create(bus, addr, phy_id);
return dev;
}
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 331521a10a2d5072be85698afd37c1300016d53d..9447a57ee8a9fbf212d8ab6b242cb5cf26a3542a 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -378,6 +378,7 @@ int phy_mii_ioctl(struct phy_device *phydev,
struct mii_ioctl_data *mii_data, int cmd);
int phy_start_interrupts(struct phy_device *phydev);
void phy_print_status(struct phy_device *phydev);
+struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id);
extern struct bus_type mdio_bus_type;
#endif /* __PHY_H */