Commit 0c3bd83b authored by Thomas Horsten's avatar Thomas Horsten Committed by Ralf Baechle
Browse files

[MIPS] Lasat: bring back from the dead



After the common MIPS CPU interrupt controller (for irq0-7) was introduced
the Lasat boards didn't get their interrupts right, so nothing worked. The
old routines need to be offset by the new 8 hardware interrupts common to
all MIPS CPU's.

Signed-off-by: default avatarThomas Horsten <thomas@horsten.com>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent d6c3048c
......@@ -34,11 +34,13 @@ static volatile int lasat_int_mask_shift;
void disable_lasat_irq(unsigned int irq_nr)
{
irq_nr -= LASAT_IRQ_BASE;
*lasat_int_mask &= ~(1 << irq_nr) << lasat_int_mask_shift;
}
void enable_lasat_irq(unsigned int irq_nr)
{
irq_nr -= LASAT_IRQ_BASE;
*lasat_int_mask |= (1 << irq_nr) << lasat_int_mask_shift;
}
......
......@@ -4,10 +4,10 @@
#define LASAT_BASE_BAUD_100 (7372800 / 16)
#define LASAT_UART_REGS_BASE_100 0x1c8b0000
#define LASAT_UART_REGS_SHIFT_100 2
#define LASATINT_UART_100 8
#define LASATINT_UART_100 16
/* * LASAT 200 boards serial configuration */
#define LASAT_BASE_BAUD_200 (100000000 / 16 / 12)
#define LASAT_UART_REGS_BASE_200 (Vrc5074_PHYS_BASE + 0x0300)
#define LASAT_UART_REGS_SHIFT_200 3
#define LASATINT_UART_200 13
#define LASATINT_UART_200 21
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment