Commit 093cf723 authored by Steven Cole's avatar Steven Cole Committed by Greg KH
Browse files

[PATCH] USB: Spelling fixes for drivers/usb.



Here are some spelling corrections for drivers/usb.

cancelation -> cancellation
succesful -> successful
cancelation -> cancellation
decriptor -> descriptor
Initalize -> Initialize
wierd -> weird
Protocoll -> Protocol
occured -> occurred
successfull -> successful
Procesing -> Processing
devide -> divide
Isochronuous -> Isochronous
noticable -> noticeable
Basicly -> Basically
transfering -> transferring
intialize -> initialize
Incomming -> Incoming
additionnal -> additional
asume -> assume
Unfortunatly -> Unfortunately
retreive -> retrieve
tranceiver -> transceiver
Compatiblity -> Compatibility
Incorprated -> Incorporated
existance -> existence
Ununsual -> Unusual
Signed-off-by: default avatarSteven Cole <elenstev@mesatop.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 7b1cbeba
...@@ -431,7 +431,7 @@ nomem: ...@@ -431,7 +431,7 @@ nomem:
* (2) error, where io->status is a negative errno value. The number * (2) error, where io->status is a negative errno value. The number
* of io->bytes transferred before the error is usually less * of io->bytes transferred before the error is usually less
* than requested, and can be nonzero. * than requested, and can be nonzero.
* (3) cancelation, a type of error with status -ECONNRESET that * (3) cancellation, a type of error with status -ECONNRESET that
* is initiated by usb_sg_cancel(). * is initiated by usb_sg_cancel().
* *
* When this function returns, all memory allocated through usb_sg_init() or * When this function returns, all memory allocated through usb_sg_init() or
...@@ -1282,7 +1282,7 @@ static void release_interface(struct device *dev) ...@@ -1282,7 +1282,7 @@ static void release_interface(struct device *dev)
* bus rwsem; usb device driver probe() methods cannot use this routine. * bus rwsem; usb device driver probe() methods cannot use this routine.
* *
* Returns zero on success, or else the status code returned by the * Returns zero on success, or else the status code returned by the
* underlying call that failed. On succesful completion, each interface * underlying call that failed. On successful completion, each interface
* in the original device configuration has been destroyed, and each one * in the original device configuration has been destroyed, and each one
* in the new configuration has been probed by all relevant usb device * in the new configuration has been probed by all relevant usb device
* drivers currently known to the kernel. * drivers currently known to the kernel.
......
...@@ -121,7 +121,7 @@ struct urb * usb_get_urb(struct urb *urb) ...@@ -121,7 +121,7 @@ struct urb * usb_get_urb(struct urb *urb)
* describing that request to the USB subsystem. Request completion will * describing that request to the USB subsystem. Request completion will
* be indicated later, asynchronously, by calling the completion handler. * be indicated later, asynchronously, by calling the completion handler.
* The three types of completion are success, error, and unlink * The three types of completion are success, error, and unlink
* (a software-induced fault, also called "request cancelation"). * (a software-induced fault, also called "request cancellation").
* *
* URBs may be submitted in interrupt context. * URBs may be submitted in interrupt context.
* *
...@@ -170,7 +170,7 @@ struct urb * usb_get_urb(struct urb *urb) ...@@ -170,7 +170,7 @@ struct urb * usb_get_urb(struct urb *urb)
* As of Linux 2.6, all USB endpoint transfer queues support depths greater * As of Linux 2.6, all USB endpoint transfer queues support depths greater
* than one. This was previously a HCD-specific behavior, except for ISO * than one. This was previously a HCD-specific behavior, except for ISO
* transfers. Non-isochronous endpoint queues are inactive during cleanup * transfers. Non-isochronous endpoint queues are inactive during cleanup
* after faults (transfer errors or cancelation). * after faults (transfer errors or cancellation).
* *
* Reserved Bandwidth Transfers: * Reserved Bandwidth Transfers:
* *
...@@ -395,7 +395,7 @@ int usb_submit_urb(struct urb *urb, int mem_flags) ...@@ -395,7 +395,7 @@ int usb_submit_urb(struct urb *urb, int mem_flags)
* *
* This routine cancels an in-progress request. URBs complete only * This routine cancels an in-progress request. URBs complete only
* once per submission, and may be canceled only once per submission. * once per submission, and may be canceled only once per submission.
* Successful cancelation means the requests's completion handler will * Successful cancellation means the requests's completion handler will
* be called with a status code indicating that the request has been * be called with a status code indicating that the request has been
* canceled (rather than any other code) and will quickly be removed * canceled (rather than any other code) and will quickly be removed
* from host controller data structures. * from host controller data structures.
......
...@@ -569,7 +569,7 @@ static const struct usb_cdc_ether_desc ether_desc = { ...@@ -569,7 +569,7 @@ static const struct usb_cdc_ether_desc ether_desc = {
/* include the status endpoint if we can, even where it's optional. /* include the status endpoint if we can, even where it's optional.
* use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one * use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one
* packet, to simplify cancelation; and a big transfer interval, to * packet, to simplify cancellation; and a big transfer interval, to
* waste less bandwidth. * waste less bandwidth.
* *
* some drivers (like Linux 2.4 cdc-ether!) "need" it to exist even * some drivers (like Linux 2.4 cdc-ether!) "need" it to exist even
......
...@@ -275,7 +275,7 @@ static const char *CHIP; ...@@ -275,7 +275,7 @@ static const char *CHIP;
* *
* After opening, configure non-control endpoints. Then use normal * After opening, configure non-control endpoints. Then use normal
* stream read() and write() requests; and maybe ioctl() to get more * stream read() and write() requests; and maybe ioctl() to get more
* precise FIFO status when recovering from cancelation. * precise FIFO status when recovering from cancellation.
*/ */
static void epio_complete (struct usb_ep *ep, struct usb_request *req) static void epio_complete (struct usb_ep *ep, struct usb_request *req)
......
...@@ -705,7 +705,7 @@ void nuke(struct lh7a40x_ep *ep, int status) ...@@ -705,7 +705,7 @@ void nuke(struct lh7a40x_ep *ep, int status)
done(ep, req, status); done(ep, req, status);
} }
/* Disable IRQ if EP is enabled (has decriptor) */ /* Disable IRQ if EP is enabled (has descriptor) */
if (ep->desc) if (ep->desc)
pio_irq_disable(ep_index(ep)); pio_irq_disable(ep_index(ep));
} }
......
...@@ -240,7 +240,7 @@ struct gs_dev { ...@@ -240,7 +240,7 @@ struct gs_dev {
struct usb_ep *dev_notify_ep; /* address of notify endpoint */ struct usb_ep *dev_notify_ep; /* address of notify endpoint */
struct usb_ep *dev_in_ep; /* address of in endpoint */ struct usb_ep *dev_in_ep; /* address of in endpoint */
struct usb_ep *dev_out_ep; /* address of out endpoint */ struct usb_ep *dev_out_ep; /* address of out endpoint */
struct usb_endpoint_descriptor /* desciptor of notify ep */ struct usb_endpoint_descriptor /* descriptor of notify ep */
*dev_notify_ep_desc; *dev_notify_ep_desc;
struct usb_endpoint_descriptor /* descriptor of in endpoint */ struct usb_endpoint_descriptor /* descriptor of in endpoint */
*dev_in_ep_desc; *dev_in_ep_desc;
......
...@@ -4329,7 +4329,7 @@ static int __init etrax_usb_hc_init(void) ...@@ -4329,7 +4329,7 @@ static int __init etrax_usb_hc_init(void)
bus->bus_name="ETRAX 100LX"; bus->bus_name="ETRAX 100LX";
bus->hcpriv = hc; bus->hcpriv = hc;
/* Initalize RH to the default address. /* Initialize RH to the default address.
And make sure that we have no status change indication */ And make sure that we have no status change indication */
hc->rh.numports = 2; /* The RH has two ports */ hc->rh.numports = 2; /* The RH has two ports */
hc->rh.devnum = 1; hc->rh.devnum = 1;
......
...@@ -134,7 +134,7 @@ static void port_power(struct sl811 *sl811, int is_on) ...@@ -134,7 +134,7 @@ static void port_power(struct sl811 *sl811, int is_on)
/* This is a PIO-only HCD. Queueing appends URBs to the endpoint's queue, /* This is a PIO-only HCD. Queueing appends URBs to the endpoint's queue,
* and may start I/O. Endpoint queues are scanned during completion irq * and may start I/O. Endpoint queues are scanned during completion irq
* handlers (one per packet: ACK, NAK, faults, etc) and urb cancelation. * handlers (one per packet: ACK, NAK, faults, etc) and urb cancellation.
* *
* Using an external DMA engine to copy a packet at a time could work, * Using an external DMA engine to copy a packet at a time could work,
* though setup/teardown costs may be too big to make it worthwhile. * though setup/teardown costs may be too big to make it worthwhile.
...@@ -738,7 +738,7 @@ retry: ...@@ -738,7 +738,7 @@ retry:
} }
#endif #endif
/* port status seems wierd until after reset, so /* port status seems weird until after reset, so
* force the reset and make khubd clean up later. * force the reset and make khubd clean up later.
*/ */
sl811->port1 |= (1 << USB_PORT_FEAT_C_CONNECTION) sl811->port1 |= (1 << USB_PORT_FEAT_C_CONNECTION)
......
...@@ -23,7 +23,7 @@ ...@@ -23,7 +23,7 @@
* *
* *
* The driver brings the USB functions of the MDC800 to Linux. * The driver brings the USB functions of the MDC800 to Linux.
* To use the Camera you must support the USB Protocoll of the camera * To use the Camera you must support the USB Protocol of the camera
* to the Kernel Node. * to the Kernel Node.
* The Driver uses a misc device Node. Create it with : * The Driver uses a misc device Node. Create it with :
* mknod /dev/mustek c 180 32 * mknod /dev/mustek c 180 32
......
...@@ -386,7 +386,7 @@ static int aiptek_convert_from_2s_complement(unsigned char c) ...@@ -386,7 +386,7 @@ static int aiptek_convert_from_2s_complement(unsigned char c)
* convention above.) I therefore have taken over REL_MISC and ABS_MISC * convention above.) I therefore have taken over REL_MISC and ABS_MISC
* (for relative and absolute reports, respectively) for communicating * (for relative and absolute reports, respectively) for communicating
* Proximity. Why two events? I thought it interesting to know if the * Proximity. Why two events? I thought it interesting to know if the
* Proximity event occured while the tablet was in absolute or relative * Proximity event occurred while the tablet was in absolute or relative
* mode. * mode.
* *
* Other tablets use the notion of a certain minimum stylus pressure * Other tablets use the notion of a certain minimum stylus pressure
......
...@@ -32,7 +32,7 @@ ...@@ -32,7 +32,7 @@
* Changed reset from standard USB dev reset to vendor reset * Changed reset from standard USB dev reset to vendor reset
* Changed data sent to host from compensated to raw coordinates * Changed data sent to host from compensated to raw coordinates
* Eliminated vendor/product module params * Eliminated vendor/product module params
* Performed multiple successfull tests with an EXII-5010UC * Performed multiple successful tests with an EXII-5010UC
* *
* 1.5 02/27/2005 ddstreet@ieee.org * 1.5 02/27/2005 ddstreet@ieee.org
* Added module parameter to select raw or hw-calibrated coordinate reporting * Added module parameter to select raw or hw-calibrated coordinate reporting
......
...@@ -5041,7 +5041,7 @@ ov6xx0_configure(struct usb_ov511 *ov) ...@@ -5041,7 +5041,7 @@ ov6xx0_configure(struct usb_ov511 *ov)
{ OV511_I2C_BUS, 0x2a, 0x04 }, /* Disable framerate adjust */ { OV511_I2C_BUS, 0x2a, 0x04 }, /* Disable framerate adjust */
// { OV511_I2C_BUS, 0x2b, 0xac }, /* Framerate; Set 2a[7] first */ // { OV511_I2C_BUS, 0x2b, 0xac }, /* Framerate; Set 2a[7] first */
{ OV511_I2C_BUS, 0x2d, 0x99 }, { OV511_I2C_BUS, 0x2d, 0x99 },
{ OV511_I2C_BUS, 0x33, 0xa0 }, /* Color Procesing Parameter */ { OV511_I2C_BUS, 0x33, 0xa0 }, /* Color Processing Parameter */
{ OV511_I2C_BUS, 0x34, 0xd2 }, /* Max A/D range */ { OV511_I2C_BUS, 0x34, 0xd2 }, /* Max A/D range */
{ OV511_I2C_BUS, 0x38, 0x8b }, { OV511_I2C_BUS, 0x38, 0x8b },
{ OV511_I2C_BUS, 0x39, 0x40 }, { OV511_I2C_BUS, 0x39, 0x40 },
......
...@@ -1100,7 +1100,7 @@ static inline int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt) ...@@ -1100,7 +1100,7 @@ static inline int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt)
unsigned char buf[4]; unsigned char buf[4];
/* set new relative angle; angles are expressed in degrees * 100, /* set new relative angle; angles are expressed in degrees * 100,
but cam as .5 degree resolution, hence devide by 200. Also but cam as .5 degree resolution, hence divide by 200. Also
the angle must be multiplied by 64 before it's send to the angle must be multiplied by 64 before it's send to
the cam (??) the cam (??)
*/ */
......
...@@ -272,7 +272,7 @@ static int pwc_allocate_buffers(struct pwc_device *pdev) ...@@ -272,7 +272,7 @@ static int pwc_allocate_buffers(struct pwc_device *pdev)
return -ENXIO; return -ENXIO;
} }
#endif #endif
/* Allocate Isochronuous pipe buffers */ /* Allocate Isochronous pipe buffers */
for (i = 0; i < MAX_ISO_BUFS; i++) { for (i = 0; i < MAX_ISO_BUFS; i++) {
if (pdev->sbuf[i].data == NULL) { if (pdev->sbuf[i].data == NULL) {
kbuf = kmalloc(ISO_BUFFER_SIZE, GFP_KERNEL); kbuf = kmalloc(ISO_BUFFER_SIZE, GFP_KERNEL);
...@@ -850,7 +850,7 @@ static int pwc_isoc_init(struct pwc_device *pdev) ...@@ -850,7 +850,7 @@ static int pwc_isoc_init(struct pwc_device *pdev)
if (pdev->vmax_packet_size < 0 || pdev->vmax_packet_size > ISO_MAX_FRAME_SIZE) { if (pdev->vmax_packet_size < 0 || pdev->vmax_packet_size > ISO_MAX_FRAME_SIZE) {
Err("Failed to find packet size for video endpoint in current alternate setting.\n"); Err("Failed to find packet size for video endpoint in current alternate setting.\n");
return -ENFILE; /* Odd error, that should be noticable */ return -ENFILE; /* Odd error, that should be noticeable */
} }
/* Set alternate interface */ /* Set alternate interface */
...@@ -2128,7 +2128,7 @@ static int __init usb_pwc_init(void) ...@@ -2128,7 +2128,7 @@ static int __init usb_pwc_init(void)
if (leds[1] >= 0) if (leds[1] >= 0)
led_off = leds[1]; led_off = leds[1];
/* Big device node whoopla. Basicly, it allows you to assign a /* Big device node whoopla. Basically, it allows you to assign a
device node (/dev/videoX) to a camera, based on its type device node (/dev/videoX) to a camera, based on its type
& serial number. The format is [type[.serialnumber]:]node. & serial number. The format is [type[.serialnumber]:]node.
......
...@@ -75,7 +75,7 @@ ...@@ -75,7 +75,7 @@
#define PWC_FPS_SNAPSHOT 0x00400000 #define PWC_FPS_SNAPSHOT 0x00400000
/* structure for transfering x & y coordinates */ /* structure for transferring x & y coordinates */
struct pwc_coord struct pwc_coord
{ {
int x, y; /* guess what */ int x, y; /* guess what */
......
...@@ -859,7 +859,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device ...@@ -859,7 +859,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
info ("udev is NULL."); info ("udev is NULL.");
} }
/* allocate memory for our device state and intialize it */ /* allocate memory for our device state and initialize it */
dev = kmalloc (sizeof(struct lego_usb_tower), GFP_KERNEL); dev = kmalloc (sizeof(struct lego_usb_tower), GFP_KERNEL);
......
...@@ -183,7 +183,7 @@ static void zd1201_usbtx(struct urb *urb, struct pt_regs *regs) ...@@ -183,7 +183,7 @@ static void zd1201_usbtx(struct urb *urb, struct pt_regs *regs)
return; return;
} }
/* Incomming data */ /* Incoming data */
static void zd1201_usbrx(struct urb *urb, struct pt_regs *regs) static void zd1201_usbrx(struct urb *urb, struct pt_regs *regs)
{ {
struct zd1201 *zd = urb->context; struct zd1201 *zd = urb->context;
...@@ -772,7 +772,7 @@ static int zd1201_net_stop(struct net_device *dev) ...@@ -772,7 +772,7 @@ static int zd1201_net_stop(struct net_device *dev)
/* /*
RFC 1042 encapsulates Ethernet frames in 802.11 frames RFC 1042 encapsulates Ethernet frames in 802.11 frames
by prefixing them with 0xaa, 0xaa, 0x03) followed by a SNAP OID of 0 by prefixing them with 0xaa, 0xaa, 0x03) followed by a SNAP OID of 0
(0x00, 0x00, 0x00). Zd requires an additionnal padding, copy (0x00, 0x00, 0x00). Zd requires an additional padding, copy
of ethernet addresses, length of the standard RFC 1042 packet of ethernet addresses, length of the standard RFC 1042 packet
and a command byte (which is nul for tx). and a command byte (which is nul for tx).
...@@ -1098,7 +1098,7 @@ static int zd1201_get_range(struct net_device *dev, ...@@ -1098,7 +1098,7 @@ static int zd1201_get_range(struct net_device *dev,
/* Little bit of magic here: we only get the quality if we poll /* Little bit of magic here: we only get the quality if we poll
* for it, and we never get an actual request to trigger such * for it, and we never get an actual request to trigger such
* a poll. Therefore we 'asume' that the user will soon ask for * a poll. Therefore we 'assume' that the user will soon ask for
* the stats after asking the bssid. * the stats after asking the bssid.
*/ */
static int zd1201_get_wap(struct net_device *dev, static int zd1201_get_wap(struct net_device *dev,
...@@ -1108,7 +1108,7 @@ static int zd1201_get_wap(struct net_device *dev, ...@@ -1108,7 +1108,7 @@ static int zd1201_get_wap(struct net_device *dev,
unsigned char buffer[6]; unsigned char buffer[6];
if (!zd1201_getconfig(zd, ZD1201_RID_COMMSQUALITY, buffer, 6)) { if (!zd1201_getconfig(zd, ZD1201_RID_COMMSQUALITY, buffer, 6)) {
/* Unfortunatly the quality and noise reported is useless. /* Unfortunately the quality and noise reported is useless.
they seem to be accumulators that increase until you they seem to be accumulators that increase until you
read them, unless we poll on a fixed interval we can't read them, unless we poll on a fixed interval we can't
use them use them
......
...@@ -234,7 +234,7 @@ static struct usb_serial_device_type cypress_hidcom_device = { ...@@ -234,7 +234,7 @@ static struct usb_serial_device_type cypress_hidcom_device = {
*****************************************************************************/ *****************************************************************************/
/* This function can either set or retreive the current serial line settings */ /* This function can either set or retrieve the current serial line settings */
static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_mask, int data_bits, int stop_bits, static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_mask, int data_bits, int stop_bits,
int parity_enable, int parity_type, int reset, int cypress_request_type) int parity_enable, int parity_type, int reset, int cypress_request_type)
{ {
......
...@@ -76,7 +76,7 @@ ...@@ -76,7 +76,7 @@
* Defererence pointers after any paranoid checks, not before. * Defererence pointers after any paranoid checks, not before.
* *
* (21/Jun/2003) Erik Nygren * (21/Jun/2003) Erik Nygren
* Added support for Home Electronics Tira-1 IR tranceiver using FT232BM chip. * Added support for Home Electronics Tira-1 IR transceiver using FT232BM chip.
* See <http://www.home-electro.com/tira1.htm>. Only operates properly * See <http://www.home-electro.com/tira1.htm>. Only operates properly
* at 100000 and RTS-CTS, so set custom divisor mode on startup. * at 100000 and RTS-CTS, so set custom divisor mode on startup.
* Also force the Tira-1 and USB-UIRT to only use their custom baud rates. * Also force the Tira-1 and USB-UIRT to only use their custom baud rates.
...@@ -91,7 +91,7 @@ ...@@ -91,7 +91,7 @@
* Minor whitespace and comment changes. * Minor whitespace and comment changes.
* *
* (12/Jun/2003) David Norwood * (12/Jun/2003) David Norwood
* Added support for USB-UIRT IR tranceiver using 8U232AM chip. * Added support for USB-UIRT IR transceiver using 8U232AM chip.
* See <http://home.earthlink.net/~jrhees/USBUIRT/index.htm>. Only * See <http://home.earthlink.net/~jrhees/USBUIRT/index.htm>. Only
* operates properly at 312500, so set custom divisor mode on startup. * operates properly at 312500, so set custom divisor mode on startup.
* *
......
...@@ -136,7 +136,7 @@ ...@@ -136,7 +136,7 @@
/* /*
* Home Electronics (www.home-electro.com) USB gadgets * Home Electronics (www.home-electro.com) USB gadgets
*/ */
#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR tranceiver */ #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */
/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment