Commit 08858461 authored by Inderpal Singh's avatar Inderpal Singh Committed by Olof Johansson

ARM: EXYNOS5: Fix kernel dump in AFTR idle mode

The kernel crashes while resuming from AFTR idle mode. It happens
because L2 cache was not going into retention state.

This patch configures the USE_RETENTION bit of ARM_L2_OPTION register
so that it does not depend on MANUAL_L2RSTDISABLE_CONTROL of
ARM_COMMON_OPTION register for L2RSTDISABLE signal.
Signed-off-by: default avatarInderpal Singh <inderpal.singh@linaro.org>
Tested-by: default avatarChander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parent 6e6a3af7
......@@ -344,6 +344,7 @@
#define EXYNOS5_FSYS_ARM_OPTION S5P_PMUREG(0x2208)
#define EXYNOS5_ISP_ARM_OPTION S5P_PMUREG(0x2288)
#define EXYNOS5_ARM_COMMON_OPTION S5P_PMUREG(0x2408)
#define EXYNOS5_ARM_L2_OPTION S5P_PMUREG(0x2608)
#define EXYNOS5_TOP_PWR_OPTION S5P_PMUREG(0x2C48)
#define EXYNOS5_TOP_PWR_SYSMEM_OPTION S5P_PMUREG(0x2CC8)
#define EXYNOS5_JPEG_MEM_OPTION S5P_PMUREG(0x2F48)
......
......@@ -228,6 +228,7 @@ static struct exynos_pmu_conf exynos5250_pmu_config[] = {
{ EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
{ EXYNOS5_ARM_L2_SYS_PWR_REG, { 0x3, 0x3, 0x3} },
{ EXYNOS5_ARM_L2_OPTION, { 0x10, 0x10, 0x0 } },
{ EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
......@@ -353,11 +354,9 @@ static void exynos5_init_pmu(void)
/*
* SKIP_DEACTIVATE_ACEACP_IN_PWDN_BITFIELD Enable
* MANUAL_L2RSTDISABLE_CONTROL_BITFIELD Enable
*/
tmp = __raw_readl(EXYNOS5_ARM_COMMON_OPTION);
tmp |= (EXYNOS5_MANUAL_L2RSTDISABLE_CONTROL |
EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN);
tmp |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
__raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION);
/*
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment