Commit 071bfefd authored by Felix Fietkau's avatar Felix Fietkau Committed by John W. Linville
Browse files

ath9k_hw: fix calculated runtime tx power limit



Use the previously calculated maximum of all rates instead of just the one
from the lowest rate of the selected PHY mode.
Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent e832bf10
......@@ -4922,25 +4922,7 @@ static void ath9k_hw_ar9300_set_txpower(struct ath_hw *ah,
"TPC[%02d] 0x%08x\n", i, targetPowerValT2[i]);
}
/*
* This is the TX power we send back to driver core,
* and it can use to pass to userspace to display our
* currently configured TX power setting.
*
* Since power is rate dependent, use one of the indices
* from the AR9300_Rates enum to select an entry from
* targetPowerValT2[] to report. Currently returns the
* power for HT40 MCS 0, HT20 MCS 0, or OFDM 6 Mbps
* as CCK power is less interesting (?).
*/
i = ALL_TARGET_LEGACY_6_24; /* legacy */
if (IS_CHAN_HT40(chan))
i = ALL_TARGET_HT40_0_8_16; /* ht40 */
else if (IS_CHAN_HT20(chan))
i = ALL_TARGET_HT20_0_8_16; /* ht20 */
ah->txpower_limit = targetPowerValT2[i];
regulatory->max_power_level = targetPowerValT2[i];
ah->txpower_limit = regulatory->max_power_level;
/* Write target power array to registers */
ar9003_hw_tx_power_regwrite(ah, targetPowerValT2);
......
......@@ -607,15 +607,6 @@ static void ath9k_hw_4k_set_txpower(struct ath_hw *ah,
if (test)
return;
/* Update regulatory */
i = rate6mb;
if (IS_CHAN_HT40(chan))
i = rateHt40_0;
else if (IS_CHAN_HT20(chan))
i = rateHt20_0;
regulatory->max_power_level = ratesArray[i];
if (AR_SREV_9280_20_OR_LATER(ah)) {
for (i = 0; i < Ar5416RateSize; i++)
ratesArray[i] -= AR5416_PWR_TABLE_OFFSET_DB * 2;
......
......@@ -746,13 +746,6 @@ static void ath9k_hw_ar9287_set_txpower(struct ath_hw *ah,
if (test)
return;
if (IS_CHAN_2GHZ(chan))
i = rate1l;
else
i = rate6mb;
regulatory->max_power_level = ratesArray[i];
if (AR_SREV_9280_20_OR_LATER(ah)) {
for (i = 0; i < Ar5416RateSize; i++)
ratesArray[i] -= AR9287_PWR_TABLE_OFFSET_DB * 2;
......
......@@ -1167,17 +1167,6 @@ static void ath9k_hw_def_set_txpower(struct ath_hw *ah,
regulatory->max_power_level = ratesArray[i];
}
if (!test) {
i = rate6mb;
if (IS_CHAN_HT40(chan))
i = rateHt40_0;
else if (IS_CHAN_HT20(chan))
i = rateHt20_0;
regulatory->max_power_level = ratesArray[i];
}
switch(ar5416_get_ntxchains(ah->txchainmask)) {
case 1:
break;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment