Commit 06ff47bc authored by Tomas Winkler's avatar Tomas Winkler Committed by John W. Linville

mac80211: add spectrum capabilities

This patch add spectrum capability and required information
elements to association request providing AP has requested it and
it is supported by the driver
Signed-off-by: default avatarTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: default avatarAssaf Krauss <assaf.krauss@intel.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 7b1e78d5
......@@ -710,6 +710,10 @@ enum ieee80211_tkip_key_type {
* @IEEE80211_HW_NOISE_DBM:
* Hardware can provide noise (radio interference) values in units dBm,
* decibel difference from one milliwatt.
*
* @IEEE80211_HW_SPECTRUM_MGMT:
* Hardware supports spectrum management defined in 802.11h
* Measurement, Channel Switch, Quieting, TPC
*/
enum ieee80211_hw_flags {
IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE = 1<<0,
......@@ -721,6 +725,7 @@ enum ieee80211_hw_flags {
IEEE80211_HW_SIGNAL_DB = 1<<6,
IEEE80211_HW_SIGNAL_DBM = 1<<7,
IEEE80211_HW_NOISE_DBM = 1<<8,
IEEE80211_HW_SPECTRUM_MGMT = 1<<9,
};
/**
......
......@@ -747,6 +747,10 @@ static void ieee80211_send_assoc(struct net_device *dev,
* b-only mode) */
rates_len = ieee80211_compatible_rates(bss, sband, &rates);
if ((bss->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
(local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT))
capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
ieee80211_rx_bss_put(dev, bss);
} else {
rates = ~0;
......@@ -814,6 +818,26 @@ static void ieee80211_send_assoc(struct net_device *dev,
}
}
if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) {
/* 1. power capabilities */
pos = skb_put(skb, 4);
*pos++ = WLAN_EID_PWR_CAPABILITY;
*pos++ = 2;
*pos++ = 0; /* min tx power */
*pos++ = local->hw.conf.channel->max_power; /* max tx power */
/* 2. supported channels */
/* TODO: get this in reg domain format */
pos = skb_put(skb, 2 * sband->n_channels + 2);
*pos++ = WLAN_EID_SUPPORTED_CHANNELS;
*pos++ = 2 * sband->n_channels;
for (i = 0; i < sband->n_channels; i++) {
*pos++ = ieee80211_frequency_to_channel(
sband->channels[i].center_freq);
*pos++ = 1; /* one channel in the subband*/
}
}
if (ifsta->extra_ie) {
pos = skb_put(skb, ifsta->extra_ie_len);
memcpy(pos, ifsta->extra_ie, ifsta->extra_ie_len);
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment