Commit 01b9f4b0 authored by Graf Yang's avatar Graf Yang Committed by Mike Frysinger
Browse files

Blackfin: improve double fault debug handling



Since the hardware only provides reporting for the last exception handled,
and the values are valid only when executing the exception handler, we
need to save the context for reporting at a later point.  While we do this
for one exception, it doesn't work properly when handling a second one as
the original exception is clobbered by the double fault.  So when double
fault debugging is enabled, create a dedicated shadow of these values and
save/restore out of there.  Now the crash report properly displays the
first exception as well as the second one.
Signed-off-by: default avatarGraf Yang <graf.yang@analog.com>
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
parent 858c5e9a
......@@ -61,6 +61,12 @@ struct blackfin_pda { /* Per-processor Data Area */
unsigned long retx;
unsigned long seqstat;
unsigned int __nmi_count; /* number of times NMI asserted on this CPU */
#ifdef CONFIG_DEBUG_DOUBLEFAULT
unsigned long dcplb_doublefault_addr;
unsigned long icplb_doublefault_addr;
unsigned long retx_doublefault;
unsigned long seqstat_doublefault;
#endif
};
extern struct blackfin_pda cpu_pda[];
......
......@@ -153,6 +153,12 @@ int main(void)
DEFINE(PDA_ICPLB, offsetof(struct blackfin_pda, icplb_fault_addr));
DEFINE(PDA_RETX, offsetof(struct blackfin_pda, retx));
DEFINE(PDA_SEQSTAT, offsetof(struct blackfin_pda, seqstat));
#ifdef CONFIG_DEBUG_DOUBLEFAULT
DEFINE(PDA_DF_DCPLB, offsetof(struct blackfin_pda, dcplb_doublefault_addr));
DEFINE(PDA_DF_ICPLB, offsetof(struct blackfin_pda, icplb_doublefault_addr));
DEFINE(PDA_DF_SEQSTAT, offsetof(struct blackfin_pda, seqstat_doublefault));
DEFINE(PDA_DF_RETX, offsetof(struct blackfin_pda, retx_doublefault));
#endif
#ifdef CONFIG_SMP
/* Inter-core lock (in L2 SRAM) */
DEFINE(SIZEOF_CORELOCK, sizeof(struct corelock_slot));
......
......@@ -229,12 +229,12 @@ asmlinkage void double_fault_c(struct pt_regs *fp)
if (((long)fp->seqstat & SEQSTAT_EXCAUSE) == VEC_UNCOV) {
unsigned int cpu = smp_processor_id();
char buf[150];
decode_address(buf, cpu_pda[cpu].retx);
decode_address(buf, cpu_pda[cpu].retx_doublefault);
printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n",
(unsigned int)cpu_pda[cpu].seqstat & SEQSTAT_EXCAUSE, buf);
decode_address(buf, cpu_pda[cpu].dcplb_fault_addr);
(unsigned int)cpu_pda[cpu].seqstat_doublefault & SEQSTAT_EXCAUSE, buf);
decode_address(buf, cpu_pda[cpu].dcplb_doublefault_addr);
printk(KERN_NOTICE " DCPLB_FAULT_ADDR: %s\n", buf);
decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
decode_address(buf, cpu_pda[cpu].icplb_doublefault_addr);
printk(KERN_NOTICE " ICPLB_FAULT_ADDR: %s\n", buf);
decode_address(buf, fp->retx);
......
......@@ -126,22 +126,22 @@ ENTRY(_coreb_trampoline_start)
* below
*/
GET_PDA(p0, r0);
r7 = [p0 + PDA_RETX];
r7 = [p0 + PDA_DF_RETX];
p1.l = _init_saved_retx_coreb;
p1.h = _init_saved_retx_coreb;
[p1] = r7;
r7 = [p0 + PDA_DCPLB];
r7 = [p0 + PDA_DF_DCPLB];
p1.l = _init_saved_dcplb_fault_addr_coreb;
p1.h = _init_saved_dcplb_fault_addr_coreb;
[p1] = r7;
r7 = [p0 + PDA_ICPLB];
r7 = [p0 + PDA_DF_ICPLB];
p1.l = _init_saved_icplb_fault_addr_coreb;
p1.h = _init_saved_icplb_fault_addr_coreb;
[p1] = r7;
r7 = [p0 + PDA_SEQSTAT];
r7 = [p0 + PDA_DF_SEQSTAT];
p1.l = _init_saved_seqstat_coreb;
p1.h = _init_saved_seqstat_coreb;
[p1] = r7;
......
......@@ -326,8 +326,6 @@ ENTRY(_ex_trap_c)
[p4] = r7;
csync;
#ifndef CONFIG_DEBUG_DOUBLEFAULT
/*
* Save these registers, as they are only valid in exception context
* (where we are now - as soon as we defer to IRQ5, they can change)
......@@ -347,7 +345,10 @@ ENTRY(_ex_trap_c)
r6 = retx;
[p5 + PDA_RETX] = r6;
#endif
r6 = SEQSTAT;
[p5 + PDA_SEQSTAT] = r6;
/* Save the state of single stepping */
r6 = SYSCFG;
[p5 + PDA_SYSCFG] = r6;
......@@ -444,6 +445,9 @@ ENTRY(_exception_to_level5)
r6 = [p5 + PDA_SYSCFG];
[sp + PT_SYSCFG] = r6;
r6 = [p5 + PDA_SEQSTAT]; /* Read back seqstat */
[sp + PT_SEQSTAT] = r6;
/* Restore the hardware error vector. */
r7.h = _evt_ivhw;
r7.l = _evt_ivhw;
......@@ -496,7 +500,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
*/
EX_SCRATCH_REG = sp;
GET_PDA_SAFE(sp);
sp = [sp + PDA_EXSTACK]
sp = [sp + PDA_EXSTACK];
/* Try to deal with syscalls quickly. */
[--sp] = ASTAT;
[--sp] = (R7:6,P5:4);
......@@ -532,18 +536,18 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
p4.l = lo(DCPLB_FAULT_ADDR);
p4.h = hi(DCPLB_FAULT_ADDR);
r7 = [p4];
[p5 + PDA_DCPLB] = r7;
[p5 + PDA_DF_DCPLB] = r7;
p4.l = lo(ICPLB_FAULT_ADDR);
p4.h = hi(ICPLB_FAULT_ADDR);
r7 = [p4];
[p5 + PDA_ICPLB] = r7;
[p5 + PDA_DF_ICPLB] = r7;
r6 = retx;
[p5 + PDA_RETX] = r6;
r7 = retx;
[p5 + PDA_DF_RETX] = r7;
r7 = SEQSTAT; /* reason code is in bit 5:0 */
[p5 + PDA_SEQSTAT] = r7;
[p5 + PDA_DF_SEQSTAT] = r7;
#else
r7 = SEQSTAT; /* reason code is in bit 5:0 */
#endif
......
......@@ -124,22 +124,22 @@ ENTRY(__start)
* below
*/
GET_PDA(p0, r0);
r6 = [p0 + PDA_RETX];
r6 = [p0 + PDA_DF_RETX];
p1.l = _init_saved_retx;
p1.h = _init_saved_retx;
[p1] = r6;
r6 = [p0 + PDA_DCPLB];
r6 = [p0 + PDA_DF_DCPLB];
p1.l = _init_saved_dcplb_fault_addr;
p1.h = _init_saved_dcplb_fault_addr;
[p1] = r6;
r6 = [p0 + PDA_ICPLB];
r6 = [p0 + PDA_DF_ICPLB];
p1.l = _init_saved_icplb_fault_addr;
p1.h = _init_saved_icplb_fault_addr;
[p1] = r6;
r6 = [p0 + PDA_SEQSTAT];
r6 = [p0 + PDA_DF_SEQSTAT];
p1.l = _init_saved_seqstat;
p1.h = _init_saved_seqstat;
[p1] = r6;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment