Commit 000d534e authored by Jarkko Nikula's avatar Jarkko Nikula Committed by Tony Lindgren
Browse files

omap: rx51: Set regulator V28 always on

It seems that the battery cover sensor in Nokia N900 is powered from the
V28 domain. Now if this regulator is disabled it causes that the gpio 160
reads only zero which effectively causes uSD removal detection.

Currently the bootloader enabled V28 is kept on but this may change in the
future according to comment in
drivers/regulator/core.c: regulator_has_full_constraints.

Also if there are any consumers on the V28 domain doing regulator_enable
regulator_disable cycle the V28 will be disabled after that.

Prepare for these by defining the V28 as always_on regulator.
Signed-off-by: default avatarJarkko Nikula <>
Cc: Adrian Hunter <>
Signed-off-by: default avatarTony Lindgren <>
parent 79ccf549
......@@ -361,6 +361,7 @@ static struct regulator_init_data rx51_vaux1 = {
.name = "V28",
.min_uV = 2800000,
.max_uV = 2800000,
.always_on = true, /* due battery cover sensor */
.valid_modes_mask = REGULATOR_MODE_NORMAL
.valid_ops_mask = REGULATOR_CHANGE_MODE
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment