cfg80211.h 129 KB
Newer Older
1 2
#ifndef __NET_CFG80211_H
#define __NET_CFG80211_H
Johannes Berg's avatar
Johannes Berg committed
3 4 5
/*
 * 802.11 device and configuration interface
 *
6
 * Copyright 2006-2010	Johannes Berg <johannes@sipsolutions.net>
Johannes Berg's avatar
Johannes Berg committed
7 8 9 10 11
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
12

Johannes Berg's avatar
Johannes Berg committed
13 14 15
#include <linux/netdevice.h>
#include <linux/debugfs.h>
#include <linux/list.h>
16
#include <linux/bug.h>
17 18
#include <linux/netlink.h>
#include <linux/skbuff.h>
19
#include <linux/nl80211.h>
20 21
#include <linux/if_ether.h>
#include <linux/ieee80211.h>
Johannes Berg's avatar
Johannes Berg committed
22 23
#include <net/regulatory.h>

24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
/**
 * DOC: Introduction
 *
 * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges
 * userspace and drivers, and offers some utility functionality associated
 * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used
 * by all modern wireless drivers in Linux, so that they offer a consistent
 * API through nl80211. For backward compatibility, cfg80211 also offers
 * wireless extensions to userspace, but hides them from drivers completely.
 *
 * Additionally, cfg80211 contains code to help enforce regulatory spectrum
 * use restrictions.
 */


/**
 * DOC: Device registration
 *
 * In order for a driver to use cfg80211, it must register the hardware device
 * with cfg80211. This happens through a number of hardware capability structs
 * described below.
 *
 * The fundamental structure for each device is the 'wiphy', of which each
 * instance describes a physical wireless device connected to the system. Each
 * such wiphy can have zero, one, or many virtual interfaces associated with
 * it, which need to be identified as such by pointing the network interface's
 * @ieee80211_ptr pointer to a &struct wireless_dev which further describes
 * the wireless part of the interface, normally this struct is embedded in the
 * network interface's private data area. Drivers can optionally allow creating
 * or destroying virtual interfaces on the fly, but without at least one or the
 * ability to create some the wireless device isn't useful.
 *
 * Each wiphy structure contains device capability information, and also has
 * a pointer to the various operations the driver offers. The definitions and
 * structures here describe these capabilities in detail.
 */

61
/*
Johannes Berg's avatar
Johannes Berg committed
62 63 64 65 66 67 68 69
 * wireless hardware capability structures
 */

/**
 * enum ieee80211_band - supported frequency bands
 *
 * The bands are assigned this way because the supported
 * bitrates differ in these bands.
70
 *
Johannes Berg's avatar
Johannes Berg committed
71 72
 * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
 * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
73
 * @IEEE80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
Johannes Berg's avatar
Johannes Berg committed
74
 * @IEEE80211_NUM_BANDS: number of defined bands
75
 */
Johannes Berg's avatar
Johannes Berg committed
76
enum ieee80211_band {
77 78
	IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
	IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
79
	IEEE80211_BAND_60GHZ = NL80211_BAND_60GHZ,
Johannes Berg's avatar
Johannes Berg committed
80 81 82 83

	/* keep last */
	IEEE80211_NUM_BANDS
};
84

85
/**
Johannes Berg's avatar
Johannes Berg committed
86 87 88 89 90 91 92 93 94
 * enum ieee80211_channel_flags - channel flags
 *
 * Channel flags set by the regulatory control code.
 *
 * @IEEE80211_CHAN_DISABLED: This channel is disabled.
 * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
 *	on this channel.
 * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
 * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
95
 * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
Johannes Berg's avatar
Johannes Berg committed
96
 * 	is not permitted.
97
 * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
Johannes Berg's avatar
Johannes Berg committed
98
 * 	is not permitted.
99
 * @IEEE80211_CHAN_NO_OFDM: OFDM is not allowed on this channel.
100
 */
Johannes Berg's avatar
Johannes Berg committed
101 102 103 104 105
enum ieee80211_channel_flags {
	IEEE80211_CHAN_DISABLED		= 1<<0,
	IEEE80211_CHAN_PASSIVE_SCAN	= 1<<1,
	IEEE80211_CHAN_NO_IBSS		= 1<<2,
	IEEE80211_CHAN_RADAR		= 1<<3,
106 107
	IEEE80211_CHAN_NO_HT40PLUS	= 1<<4,
	IEEE80211_CHAN_NO_HT40MINUS	= 1<<5,
108
	IEEE80211_CHAN_NO_OFDM		= 1<<6,
109 110
};

111
#define IEEE80211_CHAN_NO_HT40 \
112
	(IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
113

Johannes Berg's avatar
Johannes Berg committed
114 115 116 117 118 119 120 121 122 123 124 125 126 127
/**
 * struct ieee80211_channel - channel definition
 *
 * This structure describes a single channel for use
 * with cfg80211.
 *
 * @center_freq: center frequency in MHz
 * @hw_value: hardware-specific value for the channel
 * @flags: channel flags from &enum ieee80211_channel_flags.
 * @orig_flags: channel flags at registration time, used by regulatory
 *	code to support devices with additional restrictions
 * @band: band this channel belongs to.
 * @max_antenna_gain: maximum antenna gain in dBi
 * @max_power: maximum transmission power (in dBm)
128
 * @max_reg_power: maximum regulatory transmission power (in dBm)
Johannes Berg's avatar
Johannes Berg committed
129 130
 * @beacon_found: helper to regulatory code to indicate when a beacon
 *	has been found on this channel. Use regulatory_hint_found_beacon()
131
 *	to enable this, this is useful only on 5 GHz band.
Johannes Berg's avatar
Johannes Berg committed
132 133
 * @orig_mag: internal use
 * @orig_mpwr: internal use
Andy Green's avatar
Andy Green committed
134
 */
Johannes Berg's avatar
Johannes Berg committed
135 136 137 138 139 140 141
struct ieee80211_channel {
	enum ieee80211_band band;
	u16 center_freq;
	u16 hw_value;
	u32 flags;
	int max_antenna_gain;
	int max_power;
142
	int max_reg_power;
Johannes Berg's avatar
Johannes Berg committed
143 144 145 146 147
	bool beacon_found;
	u32 orig_flags;
	int orig_mag, orig_mpwr;
};

Andy Green's avatar
Andy Green committed
148
/**
Johannes Berg's avatar
Johannes Berg committed
149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167
 * enum ieee80211_rate_flags - rate flags
 *
 * Hardware/specification flags for rates. These are structured
 * in a way that allows using the same bitrate structure for
 * different bands/PHY modes.
 *
 * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
 *	preamble on this bitrate; only relevant in 2.4GHz band and
 *	with CCK rates.
 * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
 *	when used with 802.11a (on the 5 GHz band); filled by the
 *	core code when registering the wiphy.
 * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
 *	when used with 802.11b (on the 2.4 GHz band); filled by the
 *	core code when registering the wiphy.
 * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
 *	when used with 802.11g (on the 2.4 GHz band); filled by the
 *	core code when registering the wiphy.
 * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
Andy Green's avatar
Andy Green committed
168
 */
Johannes Berg's avatar
Johannes Berg committed
169 170 171 172 173 174 175
enum ieee80211_rate_flags {
	IEEE80211_RATE_SHORT_PREAMBLE	= 1<<0,
	IEEE80211_RATE_MANDATORY_A	= 1<<1,
	IEEE80211_RATE_MANDATORY_B	= 1<<2,
	IEEE80211_RATE_MANDATORY_G	= 1<<3,
	IEEE80211_RATE_ERP_G		= 1<<4,
};
Andy Green's avatar
Andy Green committed
176

Johannes Berg's avatar
Johannes Berg committed
177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195
/**
 * struct ieee80211_rate - bitrate definition
 *
 * This structure describes a bitrate that an 802.11 PHY can
 * operate with. The two values @hw_value and @hw_value_short
 * are only for driver use when pointers to this structure are
 * passed around.
 *
 * @flags: rate-specific flags
 * @bitrate: bitrate in units of 100 Kbps
 * @hw_value: driver/hardware value for this rate
 * @hw_value_short: driver/hardware value for this rate when
 *	short preamble is used
 */
struct ieee80211_rate {
	u32 flags;
	u16 bitrate;
	u16 hw_value, hw_value_short;
};
Andy Green's avatar
Andy Green committed
196

Johannes Berg's avatar
Johannes Berg committed
197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214
/**
 * struct ieee80211_sta_ht_cap - STA's HT capabilities
 *
 * This structure describes most essential parameters needed
 * to describe 802.11n HT capabilities for an STA.
 *
 * @ht_supported: is HT supported by the STA
 * @cap: HT capabilities map as described in 802.11n spec
 * @ampdu_factor: Maximum A-MPDU length factor
 * @ampdu_density: Minimum A-MPDU spacing
 * @mcs: Supported MCS rates
 */
struct ieee80211_sta_ht_cap {
	u16 cap; /* use IEEE80211_HT_CAP_ */
	bool ht_supported;
	u8 ampdu_factor;
	u8 ampdu_density;
	struct ieee80211_mcs_info mcs;
Andy Green's avatar
Andy Green committed
215 216
};

217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232
/**
 * struct ieee80211_sta_vht_cap - STA's VHT capabilities
 *
 * This structure describes most essential parameters needed
 * to describe 802.11ac VHT capabilities for an STA.
 *
 * @vht_supported: is VHT supported by the STA
 * @cap: VHT capabilities map as described in 802.11ac spec
 * @vht_mcs: Supported VHT MCS rates
 */
struct ieee80211_sta_vht_cap {
	bool vht_supported;
	u32 cap; /* use IEEE80211_VHT_CAP_ */
	struct ieee80211_vht_mcs_info vht_mcs;
};

Johannes Berg's avatar
Johannes Berg committed
233 234 235 236 237 238 239 240 241 242 243 244 245 246
/**
 * struct ieee80211_supported_band - frequency band definition
 *
 * This structure describes a frequency band a wiphy
 * is able to operate in.
 *
 * @channels: Array of channels the hardware can operate in
 *	in this band.
 * @band: the band this structure represents
 * @n_channels: Number of channels in @channels
 * @bitrates: Array of bitrates the hardware can operate with
 *	in this band. Must be sorted to give a valid "supported
 *	rates" IE, i.e. CCK rates first, then OFDM.
 * @n_bitrates: Number of bitrates in @bitrates
Johannes Berg's avatar
Johannes Berg committed
247
 * @ht_cap: HT capabilities in this band
248
 * @vht_cap: VHT capabilities in this band
Johannes Berg's avatar
Johannes Berg committed
249 250 251 252 253 254 255 256
 */
struct ieee80211_supported_band {
	struct ieee80211_channel *channels;
	struct ieee80211_rate *bitrates;
	enum ieee80211_band band;
	int n_channels;
	int n_bitrates;
	struct ieee80211_sta_ht_cap ht_cap;
257
	struct ieee80211_sta_vht_cap vht_cap;
Johannes Berg's avatar
Johannes Berg committed
258
};
Andy Green's avatar
Andy Green committed
259

Johannes Berg's avatar
Johannes Berg committed
260 261 262
/*
 * Wireless hardware/device configuration structures and methods
 */
Andy Green's avatar
Andy Green committed
263

264 265 266 267 268 269 270 271 272 273 274 275 276 277 278
/**
 * DOC: Actions and configuration
 *
 * Each wireless device and each virtual interface offer a set of configuration
 * operations and other actions that are invoked by userspace. Each of these
 * actions is described in the operations structure, and the parameters these
 * operations use are described separately.
 *
 * Additionally, some operations are asynchronous and expect to get status
 * information via some functions that drivers need to call.
 *
 * Scanning and BSS list handling with its associated functionality is described
 * in a separate chapter.
 */

Johannes Berg's avatar
Johannes Berg committed
279 280
/**
 * struct vif_params - describes virtual interface parameters
281
 * @use_4addr: use 4-address frames
Johannes Berg's avatar
Johannes Berg committed
282 283
 */
struct vif_params {
284
       int use_4addr;
Johannes Berg's avatar
Johannes Berg committed
285
};
Andy Green's avatar
Andy Green committed
286

Johannes Berg's avatar
Johannes Berg committed
287
/**
288 289 290 291 292 293 294 295 296 297
 * struct key_params - key information
 *
 * Information about a key
 *
 * @key: key material
 * @key_len: length of key material
 * @cipher: cipher suite selector
 * @seq: sequence counter (IV/PN) for TKIP and CCMP keys, only used
 *	with the get_key() callback, must be in little endian,
 *	length given by @seq_len.
Johannes Berg's avatar
Johannes Berg committed
298
 * @seq_len: length of @seq.
299 300 301 302 303 304 305 306 307
 */
struct key_params {
	u8 *key;
	u8 *seq;
	int key_len;
	int seq_len;
	u32 cipher;
};

308 309 310
/**
 * enum survey_info_flags - survey information flags
 *
Johannes Berg's avatar
Johannes Berg committed
311
 * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in
312
 * @SURVEY_INFO_IN_USE: channel is currently being used
313 314 315 316 317
 * @SURVEY_INFO_CHANNEL_TIME: channel active time (in ms) was filled in
 * @SURVEY_INFO_CHANNEL_TIME_BUSY: channel busy time was filled in
 * @SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: extension channel busy time was filled in
 * @SURVEY_INFO_CHANNEL_TIME_RX: channel receive time was filled in
 * @SURVEY_INFO_CHANNEL_TIME_TX: channel transmit time was filled in
Johannes Berg's avatar
Johannes Berg committed
318
 *
319 320 321 322 323
 * Used by the driver to indicate which info in &struct survey_info
 * it has filled in during the get_survey().
 */
enum survey_info_flags {
	SURVEY_INFO_NOISE_DBM = 1<<0,
324
	SURVEY_INFO_IN_USE = 1<<1,
325 326 327 328 329
	SURVEY_INFO_CHANNEL_TIME = 1<<2,
	SURVEY_INFO_CHANNEL_TIME_BUSY = 1<<3,
	SURVEY_INFO_CHANNEL_TIME_EXT_BUSY = 1<<4,
	SURVEY_INFO_CHANNEL_TIME_RX = 1<<5,
	SURVEY_INFO_CHANNEL_TIME_TX = 1<<6,
330 331 332 333 334 335 336 337 338
};

/**
 * struct survey_info - channel survey response
 *
 * @channel: the channel this survey record reports, mandatory
 * @filled: bitflag of flags from &enum survey_info_flags
 * @noise: channel noise in dBm. This and all following fields are
 *     optional
339 340 341 342 343
 * @channel_time: amount of time in ms the radio spent on the channel
 * @channel_time_busy: amount of time the primary channel was sensed busy
 * @channel_time_ext_busy: amount of time the extension channel was sensed busy
 * @channel_time_rx: amount of time the radio spent receiving data
 * @channel_time_tx: amount of time the radio spent transmitting data
344
 *
Johannes Berg's avatar
Johannes Berg committed
345 346
 * Used by dump_survey() to report back per-channel survey information.
 *
347 348 349 350 351
 * This structure can later be expanded with things like
 * channel duty cycle etc.
 */
struct survey_info {
	struct ieee80211_channel *channel;
352 353 354 355 356
	u64 channel_time;
	u64 channel_time_busy;
	u64 channel_time_ext_busy;
	u64 channel_time_rx;
	u64 channel_time_tx;
357 358 359 360
	u32 filled;
	s8 noise;
};

361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390
/**
 * struct cfg80211_crypto_settings - Crypto settings
 * @wpa_versions: indicates which, if any, WPA versions are enabled
 *	(from enum nl80211_wpa_versions)
 * @cipher_group: group key cipher suite (or 0 if unset)
 * @n_ciphers_pairwise: number of AP supported unicast ciphers
 * @ciphers_pairwise: unicast key cipher suites
 * @n_akm_suites: number of AKM suites
 * @akm_suites: AKM suites
 * @control_port: Whether user space controls IEEE 802.1X port, i.e.,
 *	sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
 *	required to assume that the port is unauthorized until authorized by
 *	user space. Otherwise, port is marked authorized by default.
 * @control_port_ethertype: the control port protocol that should be
 *	allowed through even on unauthorized ports
 * @control_port_no_encrypt: TRUE to prevent encryption of control port
 *	protocol frames.
 */
struct cfg80211_crypto_settings {
	u32 wpa_versions;
	u32 cipher_group;
	int n_ciphers_pairwise;
	u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES];
	int n_akm_suites;
	u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
	bool control_port;
	__be16 control_port_ethertype;
	bool control_port_no_encrypt;
};

391
/**
392
 * struct cfg80211_beacon_data - beacon data
393 394 395 396 397 398
 * @head: head portion of beacon (before TIM IE)
 *     or %NULL if not changed
 * @tail: tail portion of beacon (after TIM IE)
 *     or %NULL if not changed
 * @head_len: length of @head
 * @tail_len: length of @tail
399 400 401 402 403 404 405 406
 * @beacon_ies: extra information element(s) to add into Beacon frames or %NULL
 * @beacon_ies_len: length of beacon_ies in octets
 * @proberesp_ies: extra information element(s) to add into Probe Response
 *	frames or %NULL
 * @proberesp_ies_len: length of proberesp_ies in octets
 * @assocresp_ies: extra information element(s) to add into (Re)Association
 *	Response frames or %NULL
 * @assocresp_ies_len: length of assocresp_ies in octets
407 408
 * @probe_resp_len: length of probe response template (@probe_resp)
 * @probe_resp: probe response template (AP mode only)
409
 */
410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428
struct cfg80211_beacon_data {
	const u8 *head, *tail;
	const u8 *beacon_ies;
	const u8 *proberesp_ies;
	const u8 *assocresp_ies;
	const u8 *probe_resp;

	size_t head_len, tail_len;
	size_t beacon_ies_len;
	size_t proberesp_ies_len;
	size_t assocresp_ies_len;
	size_t probe_resp_len;
};

/**
 * struct cfg80211_ap_settings - AP configuration
 *
 * Used to configure an AP interface.
 *
429 430
 * @channel: the channel to start the AP on
 * @channel_type: the channel type to use
431 432 433 434 435 436 437 438 439 440
 * @beacon: beacon data
 * @beacon_interval: beacon interval
 * @dtim_period: DTIM period
 * @ssid: SSID to be used in the BSS (note: may be %NULL if not provided from
 *	user space)
 * @ssid_len: length of @ssid
 * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames
 * @crypto: crypto settings
 * @privacy: the BSS uses privacy
 * @auth_type: Authentication type (algorithm)
441
 * @inactivity_timeout: time in seconds to determine station's inactivity.
442 443
 */
struct cfg80211_ap_settings {
444 445 446
	struct ieee80211_channel *channel;
	enum nl80211_channel_type channel_type;

447 448 449
	struct cfg80211_beacon_data beacon;

	int beacon_interval, dtim_period;
450 451 452
	const u8 *ssid;
	size_t ssid_len;
	enum nl80211_hidden_ssid hidden_ssid;
453 454 455
	struct cfg80211_crypto_settings crypto;
	bool privacy;
	enum nl80211_auth_type auth_type;
456
	int inactivity_timeout;
457 458
};

459 460 461 462 463
/**
 * enum plink_action - actions to perform in mesh peers
 *
 * @PLINK_ACTION_INVALID: action 0 is reserved
 * @PLINK_ACTION_OPEN: start mesh peer link establishment
Johannes Berg's avatar
Johannes Berg committed
464
 * @PLINK_ACTION_BLOCK: block traffic from this mesh peer
465 466 467 468 469 470 471
 */
enum plink_actions {
	PLINK_ACTION_INVALID,
	PLINK_ACTION_OPEN,
	PLINK_ACTION_BLOCK,
};

472 473 474 475 476 477 478 479 480 481 482
/**
 * enum station_parameters_apply_mask - station parameter values to apply
 * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
 *
 * Not all station parameters have in-band "no change" signalling,
 * for those that don't these flags will are used.
 */
enum station_parameters_apply_mask {
	STATION_PARAM_APPLY_UAPSD = BIT(0),
};

483 484 485 486 487 488 489 490 491
/**
 * struct station_parameters - station parameters
 *
 * Used to change and create a new station.
 *
 * @vlan: vlan interface station should belong to
 * @supported_rates: supported rates in IEEE 802.11 format
 *	(or NULL for no change)
 * @supported_rates_len: number of supported rates
492 493 494 495
 * @sta_flags_mask: station flags that changed
 *	(bitmask of BIT(NL80211_STA_FLAG_...))
 * @sta_flags_set: station flags values
 *	(bitmask of BIT(NL80211_STA_FLAG_...))
496 497
 * @listen_interval: listen interval or -1 for no change
 * @aid: AID or zero for no change
Johannes Berg's avatar
Johannes Berg committed
498
 * @plink_action: plink action to take
499
 * @plink_state: set the peer link state for a station
Johannes Berg's avatar
Johannes Berg committed
500
 * @ht_capa: HT capabilities of station
501
 * @vht_capa: VHT capabilities of station
502 503 504 505
 * @uapsd_queues: bitmap of queues configured for uapsd. same format
 *	as the AC bitmap in the QoS info field
 * @max_sp: max Service Period. same format as the MAX_SP in the
 *	QoS info field (but already shifted down)
506 507 508
 * @sta_modify_mask: bitmap indicating which parameters changed
 *	(for those that don't have a natural "no change" value),
 *	see &enum station_parameters_apply_mask
509 510 511 512
 */
struct station_parameters {
	u8 *supported_rates;
	struct net_device *vlan;
513
	u32 sta_flags_mask, sta_flags_set;
514
	u32 sta_modify_mask;
515 516 517
	int listen_interval;
	u16 aid;
	u8 supported_rates_len;
518
	u8 plink_action;
519
	u8 plink_state;
520
	struct ieee80211_ht_cap *ht_capa;
521
	struct ieee80211_vht_cap *vht_capa;
522 523
	u8 uapsd_queues;
	u8 max_sp;
524 525
};

526
/**
527
 * enum station_info_flags - station information flags
528
 *
529 530
 * Used by the driver to indicate which info in &struct station_info
 * it has filled in during get_station() or dump_station().
531
 *
532 533 534 535 536 537
 * @STATION_INFO_INACTIVE_TIME: @inactive_time filled
 * @STATION_INFO_RX_BYTES: @rx_bytes filled
 * @STATION_INFO_TX_BYTES: @tx_bytes filled
 * @STATION_INFO_LLID: @llid filled
 * @STATION_INFO_PLID: @plid filled
 * @STATION_INFO_PLINK_STATE: @plink_state filled
538
 * @STATION_INFO_SIGNAL: @signal filled
539
 * @STATION_INFO_TX_BITRATE: @txrate fields are filled
540
 *  (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
541 542
 * @STATION_INFO_RX_PACKETS: @rx_packets filled
 * @STATION_INFO_TX_PACKETS: @tx_packets filled
543 544
 * @STATION_INFO_TX_RETRIES: @tx_retries filled
 * @STATION_INFO_TX_FAILED: @tx_failed filled
545
 * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
546
 * @STATION_INFO_SIGNAL_AVG: @signal_avg filled
547
 * @STATION_INFO_RX_BITRATE: @rxrate fields are filled
548
 * @STATION_INFO_BSS_PARAM: @bss_param filled
549
 * @STATION_INFO_CONNECTED_TIME: @connected_time filled
550
 * @STATION_INFO_ASSOC_REQ_IES: @assoc_req_ies filled
551
 * @STATION_INFO_STA_FLAGS: @sta_flags filled
552
 * @STATION_INFO_BEACON_LOSS_COUNT: @beacon_loss_count filled
553
 * @STATION_INFO_T_OFFSET: @t_offset filled
554
 */
555 556 557 558 559 560 561
enum station_info_flags {
	STATION_INFO_INACTIVE_TIME	= 1<<0,
	STATION_INFO_RX_BYTES		= 1<<1,
	STATION_INFO_TX_BYTES		= 1<<2,
	STATION_INFO_LLID		= 1<<3,
	STATION_INFO_PLID		= 1<<4,
	STATION_INFO_PLINK_STATE	= 1<<5,
562 563
	STATION_INFO_SIGNAL		= 1<<6,
	STATION_INFO_TX_BITRATE		= 1<<7,
564 565
	STATION_INFO_RX_PACKETS		= 1<<8,
	STATION_INFO_TX_PACKETS		= 1<<9,
566 567
	STATION_INFO_TX_RETRIES		= 1<<10,
	STATION_INFO_TX_FAILED		= 1<<11,
568
	STATION_INFO_RX_DROP_MISC	= 1<<12,
569
	STATION_INFO_SIGNAL_AVG		= 1<<13,
570
	STATION_INFO_RX_BITRATE		= 1<<14,
571
	STATION_INFO_BSS_PARAM          = 1<<15,
572
	STATION_INFO_CONNECTED_TIME	= 1<<16,
573
	STATION_INFO_ASSOC_REQ_IES	= 1<<17,
574
	STATION_INFO_STA_FLAGS		= 1<<18,
575 576
	STATION_INFO_BEACON_LOSS_COUNT	= 1<<19,
	STATION_INFO_T_OFFSET		= 1<<20,
577 578 579 580 581 582 583 584 585 586 587
};

/**
 * enum station_info_rate_flags - bitrate info flags
 *
 * Used by the driver to indicate the specific rate transmission
 * type for 802.11n transmissions.
 *
 * @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled
 * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission
 * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
588
 * @RATE_INFO_FLAGS_60G: 60gHz MCS
589 590 591 592 593
 */
enum rate_info_flags {
	RATE_INFO_FLAGS_MCS		= 1<<0,
	RATE_INFO_FLAGS_40_MHZ_WIDTH	= 1<<1,
	RATE_INFO_FLAGS_SHORT_GI	= 1<<2,
594
	RATE_INFO_FLAGS_60G		= 1<<3,
595 596 597 598 599 600 601 602 603 604 605 606 607 608 609
};

/**
 * struct rate_info - bitrate information
 *
 * Information about a receiving or transmitting bitrate
 *
 * @flags: bitflag of flags from &enum rate_info_flags
 * @mcs: mcs index if struct describes a 802.11n bitrate
 * @legacy: bitrate in 100kbit/s for 802.11abg
 */
struct rate_info {
	u8 flags;
	u8 mcs;
	u16 legacy;
610 611
};

612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642
/**
 * enum station_info_rate_flags - bitrate info flags
 *
 * Used by the driver to indicate the specific rate transmission
 * type for 802.11n transmissions.
 *
 * @BSS_PARAM_FLAGS_CTS_PROT: whether CTS protection is enabled
 * @BSS_PARAM_FLAGS_SHORT_PREAMBLE: whether short preamble is enabled
 * @BSS_PARAM_FLAGS_SHORT_SLOT_TIME: whether short slot time is enabled
 */
enum bss_param_flags {
	BSS_PARAM_FLAGS_CTS_PROT	= 1<<0,
	BSS_PARAM_FLAGS_SHORT_PREAMBLE	= 1<<1,
	BSS_PARAM_FLAGS_SHORT_SLOT_TIME	= 1<<2,
};

/**
 * struct sta_bss_parameters - BSS parameters for the attached station
 *
 * Information about the currently associated BSS
 *
 * @flags: bitflag of flags from &enum bss_param_flags
 * @dtim_period: DTIM period for the BSS
 * @beacon_interval: beacon interval
 */
struct sta_bss_parameters {
	u8 flags;
	u8 dtim_period;
	u16 beacon_interval;
};

643
/**
644
 * struct station_info - station information
645
 *
646
 * Station information filled by driver for get_station() and dump_station.
647
 *
648
 * @filled: bitflag of flags from &enum station_info_flags
649
 * @connected_time: time(in secs) since a station is last connected
650 651 652
 * @inactive_time: time since last station activity (tx/rx) in milliseconds
 * @rx_bytes: bytes received from this station
 * @tx_bytes: bytes transmitted to this station
653 654 655
 * @llid: mesh local link id
 * @plid: mesh peer link id
 * @plink_state: mesh peer link state
656 657 658 659
 * @signal: The signal strength, type depends on the wiphy's signal_type.
 *	For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
 * @signal_avg: Average signal strength, type depends on the wiphy's signal_type.
 *	For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
660 661
 * @txrate: current unicast bitrate from this station
 * @rxrate: current unicast bitrate to this station
662 663
 * @rx_packets: packets received from this station
 * @tx_packets: packets transmitted to this station
664 665
 * @tx_retries: cumulative retry counts
 * @tx_failed: number of failed transmissions (retries exceeded, no ACK)
666
 * @rx_dropped_misc:  Dropped for un-specified reason.
667
 * @bss_param: current BSS parameters
668 669 670 671
 * @generation: generation number for nl80211 dumps.
 *	This number should increase every time the list of stations
 *	changes, i.e. when a station is added or removed, so that
 *	userspace can tell whether it got a consistent snapshot.
672 673 674 675 676
 * @assoc_req_ies: IEs from (Re)Association Request.
 *	This is used only when in AP mode with drivers that do not use
 *	user space MLME/SME implementation. The information is provided for
 *	the cfg80211_new_sta() calls to notify user space of the IEs.
 * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets.
677
 * @sta_flags: station flags mask & values
678
 * @beacon_loss_count: Number of times beacon loss event has triggered.
679
 * @t_offset: Time offset of the station relative to this host.
680
 */
681
struct station_info {
682
	u32 filled;
683
	u32 connected_time;
684 685 686
	u32 inactive_time;
	u32 rx_bytes;
	u32 tx_bytes;
687 688 689
	u16 llid;
	u16 plid;
	u8 plink_state;
690
	s8 signal;
691
	s8 signal_avg;
692
	struct rate_info txrate;
693
	struct rate_info rxrate;
694 695
	u32 rx_packets;
	u32 tx_packets;
696 697
	u32 tx_retries;
	u32 tx_failed;
698
	u32 rx_dropped_misc;
699
	struct sta_bss_parameters bss_param;
700
	struct nl80211_sta_flag_update sta_flags;
701 702

	int generation;
703 704 705

	const u8 *assoc_req_ies;
	size_t assoc_req_ies_len;
706

707
	u32 beacon_loss_count;
708
	s64 t_offset;
709

710 711 712 713
	/*
	 * Note: Add a new enum station_info_flags value for each new field and
	 * use it to check which fields are initialized.
	 */
714 715
};

716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735
/**
 * enum monitor_flags - monitor flags
 *
 * Monitor interface configuration flags. Note that these must be the bits
 * according to the nl80211 flags.
 *
 * @MONITOR_FLAG_FCSFAIL: pass frames with bad FCS
 * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP
 * @MONITOR_FLAG_CONTROL: pass control frames
 * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering
 * @MONITOR_FLAG_COOK_FRAMES: report frames after processing
 */
enum monitor_flags {
	MONITOR_FLAG_FCSFAIL		= 1<<NL80211_MNTR_FLAG_FCSFAIL,
	MONITOR_FLAG_PLCPFAIL		= 1<<NL80211_MNTR_FLAG_PLCPFAIL,
	MONITOR_FLAG_CONTROL		= 1<<NL80211_MNTR_FLAG_CONTROL,
	MONITOR_FLAG_OTHER_BSS		= 1<<NL80211_MNTR_FLAG_OTHER_BSS,
	MONITOR_FLAG_COOK_FRAMES	= 1<<NL80211_MNTR_FLAG_COOK_FRAMES,
};

736 737 738 739 740 741
/**
 * enum mpath_info_flags -  mesh path information flags
 *
 * Used by the driver to indicate which info in &struct mpath_info it has filled
 * in during get_station() or dump_station().
 *
Johannes Berg's avatar
Johannes Berg committed
742 743 744 745 746 747 748
 * @MPATH_INFO_FRAME_QLEN: @frame_qlen filled
 * @MPATH_INFO_SN: @sn filled
 * @MPATH_INFO_METRIC: @metric filled
 * @MPATH_INFO_EXPTIME: @exptime filled
 * @MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled
 * @MPATH_INFO_DISCOVERY_RETRIES: @discovery_retries filled
 * @MPATH_INFO_FLAGS: @flags filled
749 750 751
 */
enum mpath_info_flags {
	MPATH_INFO_FRAME_QLEN		= BIT(0),
752
	MPATH_INFO_SN			= BIT(1),
753 754 755 756 757 758 759 760 761 762 763 764 765 766
	MPATH_INFO_METRIC		= BIT(2),
	MPATH_INFO_EXPTIME		= BIT(3),
	MPATH_INFO_DISCOVERY_TIMEOUT	= BIT(4),
	MPATH_INFO_DISCOVERY_RETRIES	= BIT(5),
	MPATH_INFO_FLAGS		= BIT(6),
};

/**
 * struct mpath_info - mesh path information
 *
 * Mesh path information filled by driver for get_mpath() and dump_mpath().
 *
 * @filled: bitfield of flags from &enum mpath_info_flags
 * @frame_qlen: number of queued frames for this destination
767
 * @sn: target sequence number
768 769 770 771 772
 * @metric: metric (cost) of this mesh path
 * @exptime: expiration time for the mesh path from now, in msecs
 * @flags: mesh path flags
 * @discovery_timeout: total mesh path discovery timeout, in msecs
 * @discovery_retries: mesh path discovery retries
773 774 775 776
 * @generation: generation number for nl80211 dumps.
 *	This number should increase every time the list of mesh paths
 *	changes, i.e. when a station is added or removed, so that
 *	userspace can tell whether it got a consistent snapshot.
777 778 779 780
 */
struct mpath_info {
	u32 filled;
	u32 frame_qlen;
781
	u32 sn;
782 783 784 785 786
	u32 metric;
	u32 exptime;
	u32 discovery_timeout;
	u8 discovery_retries;
	u8 flags;
787 788

	int generation;
789 790
};

791 792 793 794 795 796 797 798 799 800 801
/**
 * struct bss_parameters - BSS parameters
 *
 * Used to change BSS parameters (mainly for AP mode).
 *
 * @use_cts_prot: Whether to use CTS protection
 *	(0 = no, 1 = yes, -1 = do not change)
 * @use_short_preamble: Whether the use of short preambles is allowed
 *	(0 = no, 1 = yes, -1 = do not change)
 * @use_short_slot_time: Whether the use of short slot time is allowed
 *	(0 = no, 1 = yes, -1 = do not change)
802 803 804
 * @basic_rates: basic rates in IEEE 802.11 format
 *	(or NULL for no change)
 * @basic_rates_len: number of basic rates
805
 * @ap_isolate: do not forward packets between connected stations
806 807
 * @ht_opmode: HT Operation mode
 * 	(u16 = opmode, -1 = do not change)
808 809 810 811 812
 */
struct bss_parameters {
	int use_cts_prot;
	int use_short_preamble;
	int use_short_slot_time;
813 814
	u8 *basic_rates;
	u8 basic_rates_len;
815
	int ap_isolate;
816
	int ht_opmode;
817
};
818

819
/**
820 821 822
 * struct mesh_config - 802.11s mesh configuration
 *
 * These parameters can be changed while the mesh is active.
823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870
 *
 * @dot11MeshRetryTimeout: the initial retry timeout in millisecond units used
 *	by the Mesh Peering Open message
 * @dot11MeshConfirmTimeout: the initial retry timeout in millisecond units
 *	used by the Mesh Peering Open message
 * @dot11MeshHoldingTimeout: the confirm timeout in millisecond units used by
 *	the mesh peering management to close a mesh peering
 * @dot11MeshMaxPeerLinks: the maximum number of peer links allowed on this
 *	mesh interface
 * @dot11MeshMaxRetries: the maximum number of peer link open retries that can
 *	be sent to establish a new peer link instance in a mesh
 * @dot11MeshTTL: the value of TTL field set at a source mesh STA
 * @element_ttl: the value of TTL field set at a mesh STA for path selection
 *	elements
 * @auto_open_plinks: whether we should automatically open peer links when we
 *	detect compatible mesh peers
 * @dot11MeshNbrOffsetMaxNeighbor: the maximum number of neighbors to
 *	synchronize to for 11s default synchronization method
 * @dot11MeshHWMPmaxPREQretries: the number of action frames containing a PREQ
 *	that an originator mesh STA can send to a particular path target
 * @path_refresh_time: how frequently to refresh mesh paths in milliseconds
 * @min_discovery_timeout: the minimum length of time to wait until giving up on
 *	a path discovery in milliseconds
 * @dot11MeshHWMPactivePathTimeout: the time (in TUs) for which mesh STAs
 *	receiving a PREQ shall consider the forwarding information from the
 *	root to be valid. (TU = time unit)
 * @dot11MeshHWMPpreqMinInterval: the minimum interval of time (in TUs) during
 *	which a mesh STA can send only one action frame containing a PREQ
 *	element
 * @dot11MeshHWMPperrMinInterval: the minimum interval of time (in TUs) during
 *	which a mesh STA can send only one Action frame containing a PERR
 *	element
 * @dot11MeshHWMPnetDiameterTraversalTime: the interval of time (in TUs) that
 *	it takes for an HWMP information element to propagate across the mesh
 * @dot11MeshHWMPRootMode: the configuration of a mesh STA as root mesh STA
 * @dot11MeshHWMPRannInterval: the interval of time (in TUs) between root
 *	announcements are transmitted
 * @dot11MeshGateAnnouncementProtocol: whether to advertise that this mesh
 *	station has access to a broader network beyond the MBSS. (This is
 *	missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol set to true
 *	only means that the station will announce others it's a mesh gate, but
 *	not necessarily using the gate announcement protocol. Still keeping the
 *	same nomenclature to be in sync with the spec)
 * @dot11MeshForwarding: whether the Mesh STA is forwarding or non-forwarding
 *	entity (default is TRUE - forwarding entity)
 * @rssi_threshold: the threshold for average signal strength of candidate
 *	station to establish a peer link
 * @ht_opmode: mesh HT protection mode
871 872 873 874 875 876 877
 *
 * @dot11MeshHWMPactivePathToRootTimeout: The time (in TUs) for which mesh STAs
 *	receiving a proactive PREQ shall consider the forwarding information to
 *	the root mesh STA to be valid.
 *
 * @dot11MeshHWMProotInterval: The interval of time (in TUs) between proactive
 *	PREQs are transmitted.
878 879 880
 * @dot11MeshHWMPconfirmationInterval: The minimum interval of time (in TUs)
 *	during which a mesh STA can send only one Action frame containing
 *	a PREQ element for root path confirmation.
881
 */
882 883 884 885 886
struct mesh_config {
	u16 dot11MeshRetryTimeout;
	u16 dot11MeshConfirmTimeout;
	u16 dot11MeshHoldingTimeout;
	u16 dot11MeshMaxPeerLinks;
887 888 889
	u8 dot11MeshMaxRetries;
	u8 dot11MeshTTL;
	u8 element_ttl;
890
	bool auto_open_plinks;
891
	u32 dot11MeshNbrOffsetMaxNeighbor;
892
	u8 dot11MeshHWMPmaxPREQretries;
893 894 895 896
	u32 path_refresh_time;
	u16 min_discovery_timeout;
	u32 dot11MeshHWMPactivePathTimeout;
	u16 dot11MeshHWMPpreqMinInterval;
897
	u16 dot11MeshHWMPperrMinInterval;
898
	u16 dot11MeshHWMPnetDiameterTraversalTime;
899
	u8 dot11MeshHWMPRootMode;
900
	u16 dot11MeshHWMPRannInterval;
901
	bool dot11MeshGateAnnouncementProtocol;
902
	bool dot11MeshForwarding;
903
	s32 rssi_threshold;
904
	u16 ht_opmode;
905 906
	u32 dot11MeshHWMPactivePathToRootTimeout;
	u16 dot11MeshHWMProotInterval;
907
	u16 dot11MeshHWMPconfirmationInterval;
908 909
};

910 911
/**
 * struct mesh_setup - 802.11s mesh setup configuration
912 913
 * @channel: the channel to start the mesh network on
 * @channel_type: the channel type to use
914 915
 * @mesh_id: the mesh ID
 * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes
916
 * @sync_method: which synchronization method to use
917 918
 * @path_sel_proto: which path selection protocol to use
 * @path_metric: which metric to use
919 920
 * @ie: vendor information elements (optional)
 * @ie_len: length of vendor information elements
921 922
 * @is_authenticated: this mesh requires authentication
 * @is_secure: this mesh uses security
923
 * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a]
924 925 926 927
 *
 * These parameters are fixed when the mesh is created.
 */
struct mesh_setup {
928 929
	struct ieee80211_channel *channel;
	enum nl80211_channel_type channel_type;
930 931
	const u8 *mesh_id;
	u8 mesh_id_len;
932 933 934
	u8 sync_method;
	u8 path_sel_proto;
	u8 path_metric;
935 936
	const u8 *ie;
	u8 ie_len;
937
	bool is_authenticated;
938
	bool is_secure;
939
	int mcast_rate[IEEE80211_NUM_BANDS];
940 941
};

942 943
/**
 * struct ieee80211_txq_params - TX queue parameters
944
 * @ac: AC identifier
945 946 947 948 949 950 951 952
 * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
 * @cwmin: Minimum contention window [a value of the form 2^n-1 in the range
 *	1..32767]
 * @cwmax: Maximum contention window [a value of the form 2^n-1 in the range
 *	1..32767]
 * @aifs: Arbitration interframe space [0..255]
 */
struct ieee80211_txq_params {
953
	enum nl80211_ac ac;
954 955 956 957 958 959
	u16 txop;
	u16 cwmin;
	u16 cwmax;
	u8 aifs;
};

960 961 962
/* from net/wireless.h */
struct wiphy;

963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984
/**
 * DOC: Scanning and BSS list handling
 *
 * The scanning process itself is fairly simple, but cfg80211 offers quite
 * a bit of helper functionality. To start a scan, the scan operation will
 * be invoked with a scan definition. This scan definition contains the
 * channels to scan, and the SSIDs to send probe requests for (including the
 * wildcard, if desired). A passive scan is indicated by having no SSIDs to
 * probe. Additionally, a scan request may contain extra information elements
 * that should be added to the probe request. The IEs are guaranteed to be
 * well-formed, and will not exceed the maximum length the driver advertised
 * in the wiphy structure.
 *
 * When scanning finds a BSS, cfg80211 needs to be notified of that, because
 * it is responsible for maintaining the BSS list; the driver should not
 * maintain a list itself. For this notification, various functions exist.
 *
 * Since drivers do not maintain a BSS list, there are also a number of
 * functions to search for a BSS and obtain information about it from the
 * BSS structure cfg80211 maintains. The BSS list is also made available
 * to userspace.
 */
985

986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001
/**
 * struct cfg80211_ssid - SSID description
 * @ssid: the SSID
 * @ssid_len: length of the ssid
 */
struct cfg80211_ssid {
	u8 ssid[IEEE80211_MAX_SSID_LEN];
	u8 ssid_len;
};

/**
 * struct cfg80211_scan_request - scan request description
 *
 * @ssids: SSIDs to scan for (active scan only)
 * @n_ssids: number of SSIDs
 * @channels: channels to scan on.
1002
 * @n_channels: total number of channels to scan
1003 1004
 * @ie: optional information element(s) to add into Probe Request or %NULL
 * @ie_len: length of ie in octets
1005
 * @flags: bit field of flags controlling operation
1006
 * @rates: bitmap of rates to advertise for each band
1007
 * @wiphy: the wiphy this was for
1008
 * @scan_start: time (in jiffies) when the scan started
Johannes Berg's avatar
Johannes Berg committed
1009
 * @wdev: the wireless device to scan for
Johannes Berg's avatar
Johannes Berg committed
1010
 * @aborted: (internal) scan request was notified as aborted
1011
 * @no_cck: used to send probe requests at non CCK rate in 2GHz band
1012 1013 1014 1015 1016
 */
struct cfg80211_scan_request {
	struct cfg80211_ssid *ssids;
	int n_ssids;
	u32 n_channels;
1017
	const u8 *ie;
1018
	size_t ie_len;
1019
	u32 flags;
1020

1021 1022
	u32 rates[IEEE80211_NUM_BANDS];

Johannes Berg's avatar
Johannes Berg committed
1023 1024
	struct wireless_dev *wdev;

1025 1026
	/* internal */
	struct wiphy *wiphy;
1027
	unsigned long scan_start;
Johannes Berg's avatar
Johannes Berg committed
1028
	bool aborted;
1029
	bool no_cck;
1030 1031 1032

	/* keep last */
	struct ieee80211_channel *channels[0];
1033 1034
};

1035 1036 1037 1038 1039 1040 1041 1042 1043
/**
 * struct cfg80211_match_set - sets of attributes to match
 *
 * @ssid: SSID to be matched
 */
struct cfg80211_match_set {
	struct cfg80211_ssid ssid;
};

1044 1045 1046 1047 1048 1049
/**
 * struct cfg80211_sched_scan_request - scheduled scan request description
 *
 * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
 * @n_ssids: number of SSIDs
 * @n_channels: total number of channels to scan
1050
 * @interval: interval between each scheduled scan cycle
1051 1052
 * @ie: optional information element(s) to add into Probe Request or %NULL
 * @ie_len: length of ie in octets
1053
 * @flags: bit field of flags controlling operation
1054 1055 1056 1057 1058
 * @match_sets: sets of parameters to be matched for a scan result
 * 	entry to be considered valid and to be passed to the host
 * 	(others are filtered out).
 *	If ommited, all results are passed.
 * @n_match_sets: number of match sets
1059 1060 1061
 * @wiphy: the wiphy this was for
 * @dev: the interface
 * @channels: channels to scan
1062
 * @rssi_thold: don't report scan results below this threshold (in s32 dBm)
1063 1064 1065 1066 1067
 */
struct cfg80211_sched_scan_request {
	struct cfg80211_ssid *ssids;
	int n_ssids;
	u32 n_channels;
1068
	u32 interval;
1069 1070
	const u8 *ie;
	size_t ie_len;
1071
	u32 flags;
1072 1073
	struct cfg80211_match_set *match_sets;
	int n_match_sets;
1074
	s32 rssi_thold;
1075 1076 1077 1078

	/* internal */
	struct wiphy *wiphy;
	struct net_device *dev;
1079
	unsigned long scan_start;
1080 1081 1082 1083 1084

	/* keep last */
	struct ieee80211_channel *channels[0];
};

1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103
/**
 * enum cfg80211_signal_type - signal type
 *
 * @CFG80211_SIGNAL_TYPE_NONE: no signal strength information available
 * @CFG80211_SIGNAL_TYPE_MBM: signal strength in mBm (100*dBm)
 * @CFG80211_SIGNAL_TYPE_UNSPEC: signal strength, increasing from 0 through 100
 */
enum cfg80211_signal_type {
	CFG80211_SIGNAL_TYPE_NONE,
	CFG80211_SIGNAL_TYPE_MBM,
	CFG80211_SIGNAL_TYPE_UNSPEC,
};

/**
 * struct cfg80211_bss - BSS description
 *
 * This structure describes a BSS (which may also be a mesh network)
 * for use in scan results and similar.
 *
Johannes Berg's avatar
Johannes Berg committed
1104
 * @channel: channel this BSS is on
1105 1106 1107 1108 1109
 * @bssid: BSSID of the BSS
 * @tsf: timestamp of last received update
 * @beacon_interval: the beacon interval as from the frame
 * @capability: the capability field in host byte order
 * @information_elements: the information elements (Note that there
1110 1111 1112
 *	is no guarantee that these are well-formed!); this is a pointer to
 *	either the beacon_ies or proberesp_ies depending on whether Probe
 *	Response frame has been received
1113
 * @len_information_elements: total length of the information elements
1114 1115 1116 1117
 * @beacon_ies: the information elements from the last Beacon frame
 * @len_beacon_ies: total length of the beacon_ies
 * @proberesp_ies: the information elements from the last Probe Response frame
 * @len_proberesp_ies: total length of the proberesp_ies
Johannes Berg's avatar
Johannes Berg committed
1118
 * @signal: signal strength value (type depends on the wiphy's signal_type)
1119
 * @free_priv: function pointer to free private data
1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130
 * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes
 */
struct cfg80211_bss {
	struct ieee80211_channel *channel;

	u8 bssid[ETH_ALEN];
	u64 tsf;
	u16 beacon_interval;
	u16 capability;
	u8 *information_elements;
	size_t len_information_elements;
1131 1132 1133 1134
	u8 *beacon_ies;
	size_t len_beacon_ies;
	u8 *proberesp_ies;
	size_t len_proberesp_ies;
1135 1136 1137

	s32 signal;

1138
	void (*free_priv)(struct cfg80211_bss *bss);
1139 1140 1141
	u8 priv[0] __attribute__((__aligned__(sizeof(void *))));
};

1142 1143 1144 1145 1146 1147 1148 1149 1150
/**
 * ieee80211_bss_get_ie - find IE with given ID
 * @bss: the bss to search
 * @ie: the IE ID
 * Returns %NULL if not found.
 */
const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);


1151 1152 1153 1154 1155
/**
 * struct cfg80211_auth_request - Authentication request data
 *
 * This structure provides information needed to complete IEEE 802.11
 * authentication.
Johannes Berg's avatar
Johannes Berg committed
1156 1157
 *
 * @bss: The BSS to authenticate with.
1158 1159 1160
 * @auth_type: Authentication type (algorithm)
 * @ie: Extra IEs to add to Authentication frame or %NULL
 * @ie_len: Length of ie buffer in octets
Johannes Berg's avatar
Johannes Berg committed
1161 1162 1163
 * @key_len: length of WEP key for shared key authentication
 * @key_idx: index of WEP key for shared key authentication
 * @key: WEP key for shared key authentication
1164 1165 1166
 * @sae_data: Non-IE data to use with SAE or %NULL. This starts with
 *	Authentication transaction sequence number field.
 * @sae_data_len: Length of sae_data buffer in octets
1167 1168
 */
struct cfg80211_auth_request {
Johannes Berg's avatar
Johannes Berg committed
1169
	struct cfg80211_bss *bss;
1170 1171
	const u8 *ie;
	size_t ie_len;
Johannes Berg's avatar
Johannes Berg committed
1172
	enum nl80211_auth_type auth_type;
Johannes Berg's avatar
Johannes Berg committed
1173 1174
	const u8 *key;
	u8 key_len, key_idx;
1175 1176
	const u8 *sae_data;
	size_t sae_data_len;
1177 1178
};

1179 1180 1181 1182 1183 1184 1185 1186 1187
/**
 * enum cfg80211_assoc_req_flags - Over-ride default behaviour in association.
 *
 * @ASSOC_REQ_DISABLE_HT:  Disable HT (802.11n)
 */
enum cfg80211_assoc_req_flags {
	ASSOC_REQ_DISABLE_HT		= BIT(0),
};

1188 1189 1190 1191 1192
/**
 * struct cfg80211_assoc_request - (Re)Association request data
 *
 * This structure provides information needed to complete IEEE 802.11
 * (re)association.
1193 1194 1195 1196 1197
 * @bss: The BSS to associate with. If the call is successful the driver
 *	is given a reference that it must release, normally via a call to
 *	cfg80211_send_rx_assoc(), or, if association timed out, with a
 *	call to cfg80211_put_bss() (in addition to calling
 *	cfg80211_send_assoc_timeout())
1198 1199
 * @ie: Extra IEs to add to (Re)Association Request frame or %NULL
 * @ie_len: Length of ie buffer in octets
1200
 * @use_mfp: Use management frame protection (IEEE 802.11w) in this association
1201
 * @crypto: crypto settings
1202
 * @prev_bssid: previous BSSID, if not %NULL use reassociate frame
1203 1204 1205 1206
 * @flags:  See &enum cfg80211_assoc_req_flags
 * @ht_capa:  HT Capabilities over-rides.  Values set in ht_capa_mask
 *   will be used in ht_capa.  Un-supported values will be ignored.
 * @ht_capa_mask:  The bits of ht_capa which are to be used.
1207 1208
 */
struct cfg80211_assoc_request {
Johannes Berg's avatar
Johannes Berg committed
1209
	struct cfg80211_bss *bss;
1210
	const u8 *ie, *prev_bssid;
1211
	size_t ie_len;
1212
	struct cfg80211_crypto_settings crypto;
Johannes Berg's avatar
Johannes Berg committed
1213
	bool use_mfp;
1214 1215 1216
	u32 flags;
	struct ieee80211_ht_cap ht_capa;
	struct ieee80211_ht_cap ht_capa_mask;
1217 1218 1219 1220 1221 1222 1223 1224
};

/**
 * struct cfg80211_deauth_request - Deauthentication request data
 *
 * This structure provides information needed to complete IEEE 802.11
 * deauthentication.
 *