Kconfig 18.8 KB
Newer Older
1
#
2
# GPIO infrastructure and drivers
3
4
#

5
6
7
8
9
10
11
12
config ARCH_HAVE_CUSTOM_GPIO_H
	bool
	help
	  Selecting this config option from the architecture Kconfig allows
	  the architecture to provide a custom asm/gpio.h implementation
	  overriding the default implementations.  New uses of this are
	  strongly discouraged.

Michael Buesch's avatar
Michael Buesch committed
13
config ARCH_WANT_OPTIONAL_GPIOLIB
14
	bool
Michael Buesch's avatar
Michael Buesch committed
15
16
17
18
19
20
21
22
23
24
25
	help
	  Select this config option from the architecture Kconfig, if
	  it is possible to use gpiolib on the architecture, but let the
	  user decide whether to actually build it or not.
	  Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does
	  not depend on GPIOs being available, but rather let the user
	  decide whether he needs it or not.

config ARCH_REQUIRE_GPIOLIB
	bool
	select GPIOLIB
26
27
28
29
	help
	  Platforms select gpiolib if they use this infrastructure
	  for all their GPIOs, usually starting with ones integrated
	  into SOC processors.
Michael Buesch's avatar
Michael Buesch committed
30
31
32
33
34
35
36
37
38
39
40
41
	  Selecting this from the architecture code will cause the gpiolib
	  code to always get built in.



menuconfig GPIOLIB
	bool "GPIO Support"
	depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
	select GENERIC_GPIO
	help
	  This enables GPIO support through the generic GPIO library.
	  You only need to enable this, if you also want to enable
42
	  one or more of the GPIO drivers below.
Michael Buesch's avatar
Michael Buesch committed
43
44

	  If unsure, say N.
45

Michael Buesch's avatar
Michael Buesch committed
46
if GPIOLIB
47

48
49
50
51
config OF_GPIO
	def_bool y
	depends on OF && !SPARC

52
53
54
55
56
config DEBUG_GPIO
	bool "Debug GPIO calls"
	depends on DEBUG_KERNEL
	help
	  Say Y here to add some extra checks and diagnostics to GPIO calls.
57
58
59
	  These checks help ensure that GPIOs have been properly initialized
	  before they are used, and that sleeping calls are not made from
	  non-sleeping contexts.  They can make bitbanged serial protocols
60
61
62
	  slower.  The diagnostics help catch the type of setup errors
	  that are most common when setting up new platforms or boards.

David Brownell's avatar
David Brownell committed
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
config GPIO_SYSFS
	bool "/sys/class/gpio/... (sysfs interface)"
	depends on SYSFS && EXPERIMENTAL
	help
	  Say Y here to add a sysfs interface for GPIOs.

	  This is mostly useful to work around omissions in a system's
	  kernel support.  Those are common in custom and semicustom
	  hardware assembled using standard kernels with a minimum of
	  custom patches.  In those cases, userspace code may import
	  a given GPIO from the kernel, if no kernel driver requested it.

	  Kernel drivers may also request that a particular GPIO be
	  exported to userspace; this can be useful when debugging.

Grant Likely's avatar
Grant Likely committed
78
79
80
config GPIO_GENERIC
	tristate

81
# put drivers in the right section, in alphabetical order
82

ashishj3's avatar
ashishj3 committed
83
84
config GPIO_DA9052
	tristate "Dialog DA9052 GPIO"
85
	depends on PMIC_DA9052
ashishj3's avatar
ashishj3 committed
86
87
88
	help
	  Say yes here to enable the GPIO driver for the DA9052 chip.

89
90
91
config GPIO_MAX730X
	tristate

92
comment "Memory mapped GPIO drivers:"
93

Grant Likely's avatar
Grant Likely committed
94
95
96
config GPIO_GENERIC_PLATFORM
	tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
	select GPIO_GENERIC
97
	help
Grant Likely's avatar
Grant Likely committed
98
	  Say yes here to support basic platform_device memory-mapped GPIO controllers.
99

100
101
config GPIO_IT8761E
	tristate "IT8761E GPIO support"
102
	depends on X86  # unconditional access to IO space.
103
104
105
	help
	  Say yes here to support GPIO functionality of IT8761E super I/O chip.

Magnus Damm's avatar
Magnus Damm committed
106
107
108
109
110
111
config GPIO_EM
	tristate "Emma Mobile GPIO"
	depends on ARM
	help
	  Say yes here to support GPIO on Renesas Emma Mobile SoCs.

112
113
114
config GPIO_EP93XX
	def_bool y
	depends on ARCH_EP93XX
115
	select GPIO_GENERIC
116

117
118
119
120
121
122
123
124
config GPIO_MM_LANTIQ
	bool "Lantiq Memory mapped GPIOs"
	depends on LANTIQ && SOC_XWAY
	help
	  This enables support for memory mapped GPIOs on the External Bus Unit
	  (EBU) found on Lantiq SoCs. The gpios are output only as they are
	  created by attaching a 16bit latch to the bus.

125
126
127
128
config GPIO_MPC5200
	def_bool y
	depends on PPC_MPC52xx

129
130
131
132
133
134
135
136
config GPIO_MPC8XXX
	bool "MPC512x/MPC8xxx GPIO support"
	depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
		   FSL_SOC_BOOKE || PPC_86xx
	help
	  Say Y here if you're going to use hardware that connects to the
	  MPC512x/831x/834x/837x/8572/8610 GPIOs.

137
138
config GPIO_MSM_V1
	tristate "Qualcomm MSM GPIO v1"
139
	depends on GPIOLIB && ARCH_MSM && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
140
141
142
143
144
	help
	  Say yes here to support the GPIO interface on ARM v6 based
	  Qualcomm MSM chips.  Most of the pins on the MSM can be
	  selected for GPIO, and are controlled by this driver.

145
146
147
148
149
150
151
152
config GPIO_MSM_V2
	tristate "Qualcomm MSM GPIO v2"
	depends on GPIOLIB && ARCH_MSM
	help
	  Say yes here to support the GPIO interface on ARM v7 based
	  Qualcomm MSM chips.  Most of the pins on the MSM can be
	  selected for GPIO, and are controlled by this driver.

153
154
155
156
157
158
config GPIO_MVEBU
	def_bool y
	depends on ARCH_MVEBU
	select GPIO_GENERIC
	select GENERIC_IRQ_CHIP

159
160
161
config GPIO_MXC
	def_bool y
	depends on ARCH_MXC
Grant Likely's avatar
Grant Likely committed
162
	select GPIO_GENERIC
163
	select GENERIC_IRQ_CHIP
Grant Likely's avatar
Grant Likely committed
164
165
166
167

config GPIO_MXS
	def_bool y
	depends on ARCH_MXS
168
	select GPIO_GENERIC
169
	select GENERIC_IRQ_CHIP
170

171
172
173
config GPIO_PL061
	bool "PrimeCell PL061 GPIO support"
	depends on ARM_AMBA
174
	select GENERIC_IRQ_CHIP
175
176
177
	help
	  Say yes here to support the PrimeCell PL061 GPIO device

178
179
180
181
182
183
config GPIO_PXA
	bool "PXA GPIO support"
	depends on ARCH_PXA || ARCH_MMP
	help
	  Say yes here to support the PXA GPIO device

184
185
186
187
188
189
190
191
config GPIO_STA2X11
	bool "STA2x11/ConneXt GPIO support"
	depends on MFD_STA2X11
	select GENERIC_IRQ_CHIP
	help
	  Say yes here to support the STA2x11/ConneXt GPIO device.
	  The GPIO module has 128 GPIO pins with alternate functions.

192
193
194
195
196
197
config GPIO_VT8500
	bool "VIA/Wondermedia SoC GPIO Support"
	depends on ARCH_VT8500
	help
	  Say yes here to support the VT8500/WM8505/WM8650 GPIO controller.

198
199
config GPIO_XILINX
	bool "Xilinx GPIO support"
200
	depends on PPC_OF || MICROBLAZE
201
202
203
	help
	  Say yes here to support the Xilinx FPGA GPIO device

204
205
206
207
208
209
config GPIO_VR41XX
	tristate "NEC VR4100 series General-purpose I/O Uint support"
	depends on CPU_VR41XX
	help
	  Say yes here to support the NEC VR4100 series General-purpose I/O Uint

210
config GPIO_SCH
211
	tristate "Intel SCH/TunnelCreek/Centerton GPIO"
212
	depends on PCI && X86
213
	select MFD_CORE
214
215
	select LPC_SCH
	help
216
217
	  Say yes here to support GPIO interface on Intel Poulsbo SCH,
	  Intel Tunnel Creek processor or Intel Centerton processor.
218
219
220
221
222
223
	  The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
	  powered by the core power rail and are turned off during sleep
	  modes (S3 and higher). The remaining four GPIOs are powered by
	  the Intel SCH suspend power supply. These GPIOs remain
	  active during S3. The suspend powered GPIOs can be used to wake the
	  system from the Suspend-to-RAM state.
224
225
	  The Intel Tunnel Creek processor has 5 GPIOs powered by the
	  core power rail and 9 from suspend power supply.
226
227
228
	  The Intel Centerton processor has a total of 30 GPIO pins.
	  Twenty-one are powered by the core power rail and 9 from the
	  suspend power supply.
229

230
231
232
233
234
235
236
237
238
239
240
241
config GPIO_ICH
	tristate "Intel ICH GPIO"
	depends on PCI && X86
	select MFD_CORE
	select LPC_ICH
	help
	  Say yes here to support the GPIO functionality of a number of Intel
	  ICH-based chipsets.  Currently supported devices: ICH6, ICH7, ICH8
	  ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg
	  Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake).

	  If unsure, say N.
242

Daniel Drake's avatar
Daniel Drake committed
243
244
config GPIO_VX855
	tristate "VIA VX855/VX875 GPIO"
Arnd Bergmann's avatar
Arnd Bergmann committed
245
	depends on PCI
Daniel Drake's avatar
Daniel Drake committed
246
247
248
249
250
251
252
253
254
	select MFD_CORE
	select MFD_VX855
	help
	  Support access to the VX855/VX875 GPIO lines through the gpio library.

	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.

255
256
257
258
259
260
261
262
263
264
265
config GPIO_GE_FPGA
	bool "GE FPGA based GPIO"
	depends on GE_FPGA
	help
	  Support for common GPIO functionality provided on some GE Single Board
	  Computers.

	  This driver provides basic support (configure as input or output, read
	  and write pin state) for GPIO implemented in a number of GE single
	  board computers.

266
267
comment "I2C GPIO expanders:"

268
269
270
271
272
273
config GPIO_ARIZONA
	tristate "Wolfson Microelectronics Arizona class devices"
	depends on MFD_ARIZONA
	help
	  Support for GPIOs on Wolfson Arizona class devices.

274
275
276
277
278
279
280
config GPIO_MAX7300
	tristate "Maxim MAX7300 GPIO expander"
	depends on I2C
	select GPIO_MAX730X
	help
	  GPIO driver for Maxim MAX7301 I2C-based GPIO expander.

Eric Miao's avatar
Eric Miao committed
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
config GPIO_MAX732X
	tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
	depends on I2C
	help
	  Say yes here to support the MAX7319, MAX7320-7327 series of I2C
	  Port Expanders. Each IO port on these chips has a fixed role of
	  Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
	  Input and Output (designed by 'P'). The combinations are listed
	  below:

	  8 bits:	max7319 (8I), max7320 (8O), max7321 (8P),
		  	max7322 (4I4O), max7323 (4P4O)

	  16 bits:	max7324 (8I8O), max7325 (8P8O),
		  	max7326 (4I12O), max7327 (4P12O)

	  Board setup code must specify the model to use, and the start
	  number for these GPIOs.

300
301
302
303
304
305
306
config GPIO_MAX732X_IRQ
	bool "Interrupt controller support for MAX732x"
	depends on GPIO_MAX732X=y && GENERIC_HARDIRQS
	help
	  Say yes here to enable the max732x to be used as an interrupt
	  controller. It requires the driver to be built in the kernel.

307
308
config GPIO_MC9S08DZ60
	bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"
309
	depends on I2C=y && MACH_MX35_3DS
310
311
312
	help
	  Select this to enable the MC9S08DZ60 GPIO driver

313
config GPIO_PCA953X
314
	tristate "PCA953x, PCA955x, PCA957x, TCA64xx, and MAX7310 I/O ports"
315
316
	depends on I2C
	help
317
318
319
320
321
322
	  Say yes here to provide access to several register-oriented
	  SMBus I/O expanders, made mostly by NXP or TI.  Compatible
	  models include:

	  4 bits:	pca9536, pca9537

323
324
	  8 bits:	max7310, max7315, pca6107, pca9534, pca9538, pca9554,
			pca9556, pca9557, pca9574, tca6408
325

326
327
	  16 bits:	max7312, max7313, pca9535, pca9539, pca9555, pca9575,
			tca6416
328

329
330
331
332
333
334
335
config GPIO_PCA953X_IRQ
	bool "Interrupt controller support for PCA953x"
	depends on GPIO_PCA953X=y
	help
	  Say yes here to enable the pca953x to be used as an interrupt
	  controller. It requires the driver to be built in the kernel.

336
config GPIO_PCF857X
337
	tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
338
	depends on I2C
339
	select IRQ_DOMAIN
340
341
342
343
344
345
346
	help
	  Say yes here to provide access to most "quasi-bidirectional" I2C
	  GPIO expanders used for additional digital outputs or inputs.
	  Most of these parts are from NXP, though TI is a second source for
	  some of them.  Compatible models include:

	  8 bits:   pcf8574, pcf8574a, pca8574, pca8574a,
347
348
	            pca9670, pca9672, pca9674, pca9674a,
	  	    max7328, max7329
349
350
351
352
353
354
355
356
357
358
359
360

	  16 bits:  pcf8575, pcf8575c, pca8575,
	            pca9671, pca9673, pca9675

	  Your board setup code will need to declare the expanders in
	  use, and assign numbers to the GPIOs they expose.  Those GPIOs
	  can then be used from drivers and other kernel code, just like
	  other GPIOs, but only accessible from task contexts.

	  This driver provides an in-kernel interface to those GPIOs using
	  platform-neutral GPIO calls.

361
362
363
364
365
366
367
368
369
config GPIO_RC5T583
	bool "RICOH RC5T583 GPIO"
	depends on MFD_RC5T583
	help
	  Select this option to enable GPIO driver for the Ricoh RC5T583
	  chip family.
	  This driver provides the support for driving/reading the gpio pins
	  of RC5T583 device through standard gpio library.

370
371
372
373
374
375
376
377
378
379
380
config GPIO_SX150X
	bool "Semtech SX150x I2C GPIO expander"
	depends on I2C=y
	default n
	help
	  Say yes here to provide support for Semtech SX150-series I2C
	  GPIO expanders. Compatible models include:

	  8 bits:  sx1508q
	  16 bits: sx1509q

Rabin Vincent's avatar
Rabin Vincent committed
381
382
383
384
385
386
387
config GPIO_STMPE
	bool "STMPE GPIOs"
	depends on MFD_STMPE
	help
	  This enables support for the GPIOs found on the STMPE I/O
	  Expanders.

388
389
390
391
392
393
394
395
396
397
config GPIO_STP_XWAY
	bool "XWAY STP GPIOs"
	depends on SOC_XWAY
	help
	  This enables support for the Serial To Parallel (STP) unit found on
	  XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
	  that can be up to 24 bit. This peripheral is aimed at driving leds.
	  Some of the gpios/leds can be auto updated by the soc with dsl and
	  phy status.

398
399
400
config GPIO_TC3589X
	bool "TC3589X GPIOs"
	depends on MFD_TC3589X
Rabin Vincent's avatar
Rabin Vincent committed
401
	help
402
	  This enables support for the GPIOs found on the TC3589X
Rabin Vincent's avatar
Rabin Vincent committed
403
404
	  I/O Expander.

405
406
407
408
409
410
config GPIO_TPS65912
	tristate "TI TPS65912 GPIO"
	depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
	help
	  This driver supports TPS65912 gpio chip

David Brownell's avatar
David Brownell committed
411
412
413
414
415
416
417
config GPIO_TWL4030
	tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
	depends on TWL4030_CORE
	help
	  Say yes here to access the GPIO signals of various multi-function
	  power management chips from Texas Instruments.

418
419
420
421
422
423
424
config GPIO_TWL6040
	tristate "TWL6040 GPO"
	depends on TWL6040_CORE
	help
	  Say yes here to access the GPO signals of twl6040
	  audio chip from Texas Instruments.

Mark Brown's avatar
Mark Brown committed
425
426
427
428
429
430
431
config GPIO_WM831X
	tristate "WM831x GPIOs"
	depends on MFD_WM831X
	help
	  Say yes here to access the GPIO signals of WM831x power management
	  chips from Wolfson Microelectronics.

432
433
434
435
436
437
438
config GPIO_WM8350
	tristate "WM8350 GPIOs"
	depends on MFD_WM8350
	help
	  Say yes here to access the GPIO signals of WM8350 power management
	  chips from Wolfson Microelectronics.

Mark Brown's avatar
Mark Brown committed
439
440
441
442
443
444
445
config GPIO_WM8994
	tristate "WM8994 GPIOs"
	depends on MFD_WM8994
	help
	  Say yes here to access the GPIO signals of WM8994 audio hub
	  CODECs from Wolfson Microelectronics.

446
447
448
449
450
451
452
config GPIO_ADP5520
	tristate "GPIO Support for ADP5520 PMIC"
	depends on PMIC_ADP5520
	help
	  This option enables support for on-chip GPIO found
	  on Analog Devices ADP5520 PMICs.

453
454
455
456
457
458
459
config GPIO_ADP5588
	tristate "ADP5588 I2C GPIO expander"
	depends on I2C
	help
	  This option enables support for 18 GPIOs found
	  on Analog Devices ADP5588 GPIO Expanders.

460
461
462
463
464
465
466
config GPIO_ADP5588_IRQ
	bool "Interrupt controller support for ADP5588"
	depends on GPIO_ADP5588=y
	help
	  Say yes here to enable the adp5588 to be used as an interrupt
	  controller. It requires the driver to be built in the kernel.

467
468
469
470
471
472
config GPIO_ADNP
	tristate "Avionic Design N-bit GPIO expander"
	depends on I2C && OF
	help
	  This option enables support for N GPIOs found on Avionic Design
	  I2C GPIO expanders. The register space will be extended by powers
473
	  of two, so the controller will need to accommodate for that. For
474
475
476
477
	  example: if a controller provides 48 pins, 6 registers will be
	  enough to represent all pins, but the driver will assume a
	  register layout for 64 pins (8 registers).

Michael Buesch's avatar
Michael Buesch committed
478
479
comment "PCI GPIO expanders:"

480
481
config GPIO_CS5535
	tristate "AMD CS5535/CS5536 GPIO support"
482
	depends on PCI && X86 && MFD_CS5535
483
484
485
486
487
488
489
	help
	  The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
	  can be used for quite a number of things.  The CS5535/6 is found on
	  AMD Geode and Lemote Yeeloong devices.

	  If unsure, say N.

Michael Buesch's avatar
Michael Buesch committed
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
config GPIO_BT8XX
	tristate "BT8XX GPIO abuser"
	depends on PCI && VIDEO_BT848=n
	help
	  The BT8xx frame grabber chip has 24 GPIO pins than can be abused
	  as a cheap PCI GPIO card.

	  This chip can be found on Miro, Hauppauge and STB TV-cards.

	  The card needs to be physically altered for using it as a
	  GPIO card. For more information on how to build a GPIO card
	  from a BT8xx TV card, see the documentation file at
	  Documentation/bt8xxgpio.txt

	  If unsure, say N.

506
507
508
509
510
511
512
513
514
515
516
517
config GPIO_AMD8111
	tristate "AMD 8111 GPIO driver"
	depends on PCI
	help
	  The AMD 8111 south bridge contains 32 GPIO pins which can be used.

	  Note, that usually system firmware/ACPI handles GPIO pins on their
	  own and users might easily break their systems with uncarefull usage
	  of this driver!

	  If unsure, say N

518
config GPIO_LANGWELL
Alek Du's avatar
Alek Du committed
519
	bool "Intel Langwell/Penwell GPIO support"
520
	depends on PCI && X86
521
	select IRQ_DOMAIN
522
	help
Alek Du's avatar
Alek Du committed
523
	  Say Y here to support Intel Langwell/Penwell GPIO.
524

525
config GPIO_PCH
526
	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO"
527
	depends on PCI && X86
528
	select GENERIC_IRQ_CHIP
529
530
531
532
533
	help
	  This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
	  which is an IOH(Input/Output Hub) for x86 embedded processor.
	  This driver can access PCH GPIO device.

534
535
	  This driver also can be used for LAPIS Semiconductor IOH(Input/
	  Output Hub), ML7223 and ML7831.
536
	  ML7223 IOH is for MP(Media Phone) use.
537
538
539
	  ML7831 IOH is for general purpose use.
	  ML7223/ML7831 is companion chip for Intel Atom E6xx series.
	  ML7223/ML7831 is completely compatible for Intel EG20T PCH.
540

541
542
543
config GPIO_ML_IOH
	tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
	depends on PCI
544
	select GENERIC_IRQ_CHIP
545
546
547
548
549
550
	help
	  ML7213 is companion chip for Intel Atom E6xx series.
	  This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
	  Hub) which is for IVI(In-Vehicle Infotainment) use.
	  This driver can access the IOH's GPIO device.

551
552
config GPIO_SODAVILLE
	bool "Intel Sodaville GPIO support"
553
	depends on X86 && PCI && OF
554
555
556
557
558
	select GPIO_GENERIC
	select GENERIC_IRQ_CHIP
	help
	  Say Y here to support Intel Sodaville GPIO.

559
560
config GPIO_TIMBERDALE
	bool "Support for timberdale GPIO IP"
561
	depends on MFD_TIMBERDALE && HAS_IOMEM
562
563
564
	---help---
	Add support for the GPIO IP in the timberdale FPGA.

565
566
config GPIO_RDC321X
	tristate "RDC R-321x GPIO support"
567
	depends on PCI
568
	select MFD_CORE
569
570
571
572
573
	select MFD_RDC321X
	help
	  Support for the RDC R321x SoC GPIOs over southbridge
	  PCI configuration space.

574
575
comment "SPI GPIO expanders:"

576
577
578
config GPIO_MAX7301
	tristate "Maxim MAX7301 GPIO expander"
	depends on SPI_MASTER
579
	select GPIO_MAX730X
580
	help
581
	  GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
582

583
config GPIO_MCP23S08
Peter Korsgaard's avatar
Peter Korsgaard committed
584
585
	tristate "Microchip MCP23xxx I/O expander"
	depends on SPI_MASTER || I2C
586
	help
Peter Korsgaard's avatar
Peter Korsgaard committed
587
588
	  SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
	  I/O expanders.
589
	  This provides a GPIO interface supporting inputs and outputs.
590

Richard Röjfors's avatar
Richard Röjfors committed
591
592
593
594
595
596
597
config GPIO_MC33880
	tristate "Freescale MC33880 high-side/low-side switch"
	depends on SPI_MASTER
	help
	  SPI driver for Freescale MC33880 high-side/low-side switch.
	  This provides GPIO interface supporting inputs and outputs.

598
599
600
601
602
603
604
605
config GPIO_74X164
	tristate "74x164 serial-in/parallel-out 8-bits shift register"
	depends on SPI_MASTER
	help
	  Platform driver for 74x164 compatible serial-in/parallel-out
	  8-outputs shift registers. This driver can be used to provide access
	  to more gpio outputs.

606
607
608
609
610
611
612
613
614
comment "AC97 GPIO expanders:"

config GPIO_UCB1400
	bool "Philips UCB1400 GPIO"
	depends on UCB1400_CORE
	help
	  This enables support for the Philips UCB1400 GPIO pins.
	  The UCB1400 is an AC97 audio codec.

615
616
617
618
619
620
621
622
623
624
comment "MODULbus GPIO expanders:"

config GPIO_JANZ_TTL
	tristate "Janz VMOD-TTL Digital IO Module"
	depends on MFD_JANZ_CMODIO
	help
	  This enables support for the Janz VMOD-TTL Digital IO module.
	  This driver provides support for driving the pins in output
	  mode only. Input mode is not supported.

Grant Likely's avatar
Grant Likely committed
625
config GPIO_AB8500
626
	bool "ST-Ericsson AB8500 Mixed Signal Circuit gpio functions"
Thomas Gleixner's avatar
Thomas Gleixner committed
627
	depends on AB8500_CORE && BROKEN
628
629
	help
	  Select this to enable the AB8500 IC GPIO driver
630

631
632
633
634
635
636
637
config GPIO_TPS6586X
	bool "TPS6586X GPIO"
	depends on MFD_TPS6586X
	help
	  Select this option to enable GPIO driver for the TPS6586X
	  chip family.

638
639
640
641
642
643
config GPIO_TPS65910
	bool "TPS65910 GPIO"
	depends on MFD_TPS65910
	help
	  Select this option to enable GPIO driver for the TPS65910
	  chip family.
Mathias Nyman's avatar
Mathias Nyman committed
644
645
646
647
648
649
650
651

config GPIO_MSIC
	bool "Intel MSIC mixed signal gpio support"
	depends on MFD_INTEL_MSIC
	help
	  Enable support for GPIO on intel MSIC controllers found in
	  intel MID devices

Michael Buesch's avatar
Michael Buesch committed
652
endif