cfg80211.h 114 KB
Newer Older
1 2
#ifndef __NET_CFG80211_H
#define __NET_CFG80211_H
Johannes Berg's avatar
Johannes Berg committed
3 4 5
/*
 * 802.11 device and configuration interface
 *
6
 * Copyright 2006-2010	Johannes Berg <johannes@sipsolutions.net>
Johannes Berg's avatar
Johannes Berg committed
7 8 9 10 11
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
12

Johannes Berg's avatar
Johannes Berg committed
13 14 15
#include <linux/netdevice.h>
#include <linux/debugfs.h>
#include <linux/list.h>
16 17
#include <linux/netlink.h>
#include <linux/skbuff.h>
18
#include <linux/nl80211.h>
19 20
#include <linux/if_ether.h>
#include <linux/ieee80211.h>
Johannes Berg's avatar
Johannes Berg committed
21 22
#include <net/regulatory.h>

23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
/**
 * DOC: Introduction
 *
 * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges
 * userspace and drivers, and offers some utility functionality associated
 * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used
 * by all modern wireless drivers in Linux, so that they offer a consistent
 * API through nl80211. For backward compatibility, cfg80211 also offers
 * wireless extensions to userspace, but hides them from drivers completely.
 *
 * Additionally, cfg80211 contains code to help enforce regulatory spectrum
 * use restrictions.
 */


/**
 * DOC: Device registration
 *
 * In order for a driver to use cfg80211, it must register the hardware device
 * with cfg80211. This happens through a number of hardware capability structs
 * described below.
 *
 * The fundamental structure for each device is the 'wiphy', of which each
 * instance describes a physical wireless device connected to the system. Each
 * such wiphy can have zero, one, or many virtual interfaces associated with
 * it, which need to be identified as such by pointing the network interface's
 * @ieee80211_ptr pointer to a &struct wireless_dev which further describes
 * the wireless part of the interface, normally this struct is embedded in the
 * network interface's private data area. Drivers can optionally allow creating
 * or destroying virtual interfaces on the fly, but without at least one or the
 * ability to create some the wireless device isn't useful.
 *
 * Each wiphy structure contains device capability information, and also has
 * a pointer to the various operations the driver offers. The definitions and
 * structures here describe these capabilities in detail.
 */

60
/*
Johannes Berg's avatar
Johannes Berg committed
61 62 63 64 65 66 67 68
 * wireless hardware capability structures
 */

/**
 * enum ieee80211_band - supported frequency bands
 *
 * The bands are assigned this way because the supported
 * bitrates differ in these bands.
69
 *
Johannes Berg's avatar
Johannes Berg committed
70 71
 * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
 * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
Johannes Berg's avatar
Johannes Berg committed
72
 * @IEEE80211_NUM_BANDS: number of defined bands
73
 */
Johannes Berg's avatar
Johannes Berg committed
74
enum ieee80211_band {
75 76
	IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
	IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
Johannes Berg's avatar
Johannes Berg committed
77 78 79 80

	/* keep last */
	IEEE80211_NUM_BANDS
};
81

82
/**
Johannes Berg's avatar
Johannes Berg committed
83 84 85 86 87 88 89 90 91
 * enum ieee80211_channel_flags - channel flags
 *
 * Channel flags set by the regulatory control code.
 *
 * @IEEE80211_CHAN_DISABLED: This channel is disabled.
 * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
 *	on this channel.
 * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
 * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
92
 * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
Johannes Berg's avatar
Johannes Berg committed
93
 * 	is not permitted.
94
 * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
Johannes Berg's avatar
Johannes Berg committed
95
 * 	is not permitted.
96
 */
Johannes Berg's avatar
Johannes Berg committed
97 98 99 100 101
enum ieee80211_channel_flags {
	IEEE80211_CHAN_DISABLED		= 1<<0,
	IEEE80211_CHAN_PASSIVE_SCAN	= 1<<1,
	IEEE80211_CHAN_NO_IBSS		= 1<<2,
	IEEE80211_CHAN_RADAR		= 1<<3,
102 103
	IEEE80211_CHAN_NO_HT40PLUS	= 1<<4,
	IEEE80211_CHAN_NO_HT40MINUS	= 1<<5,
104 105
};

106
#define IEEE80211_CHAN_NO_HT40 \
107
	(IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
108

Johannes Berg's avatar
Johannes Berg committed
109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124
/**
 * struct ieee80211_channel - channel definition
 *
 * This structure describes a single channel for use
 * with cfg80211.
 *
 * @center_freq: center frequency in MHz
 * @hw_value: hardware-specific value for the channel
 * @flags: channel flags from &enum ieee80211_channel_flags.
 * @orig_flags: channel flags at registration time, used by regulatory
 *	code to support devices with additional restrictions
 * @band: band this channel belongs to.
 * @max_antenna_gain: maximum antenna gain in dBi
 * @max_power: maximum transmission power (in dBm)
 * @beacon_found: helper to regulatory code to indicate when a beacon
 *	has been found on this channel. Use regulatory_hint_found_beacon()
125
 *	to enable this, this is useful only on 5 GHz band.
Johannes Berg's avatar
Johannes Berg committed
126 127
 * @orig_mag: internal use
 * @orig_mpwr: internal use
Andy Green's avatar
Andy Green committed
128
 */
Johannes Berg's avatar
Johannes Berg committed
129 130 131 132 133 134 135 136 137 138 139 140
struct ieee80211_channel {
	enum ieee80211_band band;
	u16 center_freq;
	u16 hw_value;
	u32 flags;
	int max_antenna_gain;
	int max_power;
	bool beacon_found;
	u32 orig_flags;
	int orig_mag, orig_mpwr;
};

Andy Green's avatar
Andy Green committed
141
/**
Johannes Berg's avatar
Johannes Berg committed
142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160
 * enum ieee80211_rate_flags - rate flags
 *
 * Hardware/specification flags for rates. These are structured
 * in a way that allows using the same bitrate structure for
 * different bands/PHY modes.
 *
 * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
 *	preamble on this bitrate; only relevant in 2.4GHz band and
 *	with CCK rates.
 * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
 *	when used with 802.11a (on the 5 GHz band); filled by the
 *	core code when registering the wiphy.
 * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
 *	when used with 802.11b (on the 2.4 GHz band); filled by the
 *	core code when registering the wiphy.
 * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
 *	when used with 802.11g (on the 2.4 GHz band); filled by the
 *	core code when registering the wiphy.
 * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
Andy Green's avatar
Andy Green committed
161
 */
Johannes Berg's avatar
Johannes Berg committed
162 163 164 165 166 167 168
enum ieee80211_rate_flags {
	IEEE80211_RATE_SHORT_PREAMBLE	= 1<<0,
	IEEE80211_RATE_MANDATORY_A	= 1<<1,
	IEEE80211_RATE_MANDATORY_B	= 1<<2,
	IEEE80211_RATE_MANDATORY_G	= 1<<3,
	IEEE80211_RATE_ERP_G		= 1<<4,
};
Andy Green's avatar
Andy Green committed
169

Johannes Berg's avatar
Johannes Berg committed
170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188
/**
 * struct ieee80211_rate - bitrate definition
 *
 * This structure describes a bitrate that an 802.11 PHY can
 * operate with. The two values @hw_value and @hw_value_short
 * are only for driver use when pointers to this structure are
 * passed around.
 *
 * @flags: rate-specific flags
 * @bitrate: bitrate in units of 100 Kbps
 * @hw_value: driver/hardware value for this rate
 * @hw_value_short: driver/hardware value for this rate when
 *	short preamble is used
 */
struct ieee80211_rate {
	u32 flags;
	u16 bitrate;
	u16 hw_value, hw_value_short;
};
Andy Green's avatar
Andy Green committed
189

Johannes Berg's avatar
Johannes Berg committed
190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207
/**
 * struct ieee80211_sta_ht_cap - STA's HT capabilities
 *
 * This structure describes most essential parameters needed
 * to describe 802.11n HT capabilities for an STA.
 *
 * @ht_supported: is HT supported by the STA
 * @cap: HT capabilities map as described in 802.11n spec
 * @ampdu_factor: Maximum A-MPDU length factor
 * @ampdu_density: Minimum A-MPDU spacing
 * @mcs: Supported MCS rates
 */
struct ieee80211_sta_ht_cap {
	u16 cap; /* use IEEE80211_HT_CAP_ */
	bool ht_supported;
	u8 ampdu_factor;
	u8 ampdu_density;
	struct ieee80211_mcs_info mcs;
Andy Green's avatar
Andy Green committed
208 209
};

Johannes Berg's avatar
Johannes Berg committed
210 211 212 213 214 215 216 217 218 219 220 221 222 223
/**
 * struct ieee80211_supported_band - frequency band definition
 *
 * This structure describes a frequency band a wiphy
 * is able to operate in.
 *
 * @channels: Array of channels the hardware can operate in
 *	in this band.
 * @band: the band this structure represents
 * @n_channels: Number of channels in @channels
 * @bitrates: Array of bitrates the hardware can operate with
 *	in this band. Must be sorted to give a valid "supported
 *	rates" IE, i.e. CCK rates first, then OFDM.
 * @n_bitrates: Number of bitrates in @bitrates
Johannes Berg's avatar
Johannes Berg committed
224
 * @ht_cap: HT capabilities in this band
Johannes Berg's avatar
Johannes Berg committed
225 226 227 228 229 230 231 232 233
 */
struct ieee80211_supported_band {
	struct ieee80211_channel *channels;
	struct ieee80211_rate *bitrates;
	enum ieee80211_band band;
	int n_channels;
	int n_bitrates;
	struct ieee80211_sta_ht_cap ht_cap;
};
Andy Green's avatar
Andy Green committed
234

Johannes Berg's avatar
Johannes Berg committed
235 236 237
/*
 * Wireless hardware/device configuration structures and methods
 */
Andy Green's avatar
Andy Green committed
238

239 240 241 242 243 244 245 246 247 248 249 250 251 252 253
/**
 * DOC: Actions and configuration
 *
 * Each wireless device and each virtual interface offer a set of configuration
 * operations and other actions that are invoked by userspace. Each of these
 * actions is described in the operations structure, and the parameters these
 * operations use are described separately.
 *
 * Additionally, some operations are asynchronous and expect to get status
 * information via some functions that drivers need to call.
 *
 * Scanning and BSS list handling with its associated functionality is described
 * in a separate chapter.
 */

Johannes Berg's avatar
Johannes Berg committed
254 255
/**
 * struct vif_params - describes virtual interface parameters
256
 * @use_4addr: use 4-address frames
Johannes Berg's avatar
Johannes Berg committed
257 258
 */
struct vif_params {
259
       int use_4addr;
Johannes Berg's avatar
Johannes Berg committed
260
};
Andy Green's avatar
Andy Green committed
261

Johannes Berg's avatar
Johannes Berg committed
262
/**
263 264 265 266 267 268 269 270 271 272
 * struct key_params - key information
 *
 * Information about a key
 *
 * @key: key material
 * @key_len: length of key material
 * @cipher: cipher suite selector
 * @seq: sequence counter (IV/PN) for TKIP and CCMP keys, only used
 *	with the get_key() callback, must be in little endian,
 *	length given by @seq_len.
Johannes Berg's avatar
Johannes Berg committed
273
 * @seq_len: length of @seq.
274 275 276 277 278 279 280 281 282
 */
struct key_params {
	u8 *key;
	u8 *seq;
	int key_len;
	int seq_len;
	u32 cipher;
};

283 284 285
/**
 * enum survey_info_flags - survey information flags
 *
Johannes Berg's avatar
Johannes Berg committed
286
 * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in
287
 * @SURVEY_INFO_IN_USE: channel is currently being used
288 289 290 291 292
 * @SURVEY_INFO_CHANNEL_TIME: channel active time (in ms) was filled in
 * @SURVEY_INFO_CHANNEL_TIME_BUSY: channel busy time was filled in
 * @SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: extension channel busy time was filled in
 * @SURVEY_INFO_CHANNEL_TIME_RX: channel receive time was filled in
 * @SURVEY_INFO_CHANNEL_TIME_TX: channel transmit time was filled in
Johannes Berg's avatar
Johannes Berg committed
293
 *
294 295 296 297 298
 * Used by the driver to indicate which info in &struct survey_info
 * it has filled in during the get_survey().
 */
enum survey_info_flags {
	SURVEY_INFO_NOISE_DBM = 1<<0,
299
	SURVEY_INFO_IN_USE = 1<<1,
300 301 302 303 304
	SURVEY_INFO_CHANNEL_TIME = 1<<2,
	SURVEY_INFO_CHANNEL_TIME_BUSY = 1<<3,
	SURVEY_INFO_CHANNEL_TIME_EXT_BUSY = 1<<4,
	SURVEY_INFO_CHANNEL_TIME_RX = 1<<5,
	SURVEY_INFO_CHANNEL_TIME_TX = 1<<6,
305 306 307 308 309 310 311 312 313
};

/**
 * struct survey_info - channel survey response
 *
 * @channel: the channel this survey record reports, mandatory
 * @filled: bitflag of flags from &enum survey_info_flags
 * @noise: channel noise in dBm. This and all following fields are
 *     optional
314 315 316 317 318
 * @channel_time: amount of time in ms the radio spent on the channel
 * @channel_time_busy: amount of time the primary channel was sensed busy
 * @channel_time_ext_busy: amount of time the extension channel was sensed busy
 * @channel_time_rx: amount of time the radio spent receiving data
 * @channel_time_tx: amount of time the radio spent transmitting data
319
 *
Johannes Berg's avatar
Johannes Berg committed
320 321
 * Used by dump_survey() to report back per-channel survey information.
 *
322 323 324 325 326
 * This structure can later be expanded with things like
 * channel duty cycle etc.
 */
struct survey_info {
	struct ieee80211_channel *channel;
327 328 329 330 331
	u64 channel_time;
	u64 channel_time_busy;
	u64 channel_time_ext_busy;
	u64 channel_time_rx;
	u64 channel_time_tx;
332 333 334 335
	u32 filled;
	s8 noise;
};

336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365
/**
 * struct cfg80211_crypto_settings - Crypto settings
 * @wpa_versions: indicates which, if any, WPA versions are enabled
 *	(from enum nl80211_wpa_versions)
 * @cipher_group: group key cipher suite (or 0 if unset)
 * @n_ciphers_pairwise: number of AP supported unicast ciphers
 * @ciphers_pairwise: unicast key cipher suites
 * @n_akm_suites: number of AKM suites
 * @akm_suites: AKM suites
 * @control_port: Whether user space controls IEEE 802.1X port, i.e.,
 *	sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
 *	required to assume that the port is unauthorized until authorized by
 *	user space. Otherwise, port is marked authorized by default.
 * @control_port_ethertype: the control port protocol that should be
 *	allowed through even on unauthorized ports
 * @control_port_no_encrypt: TRUE to prevent encryption of control port
 *	protocol frames.
 */
struct cfg80211_crypto_settings {
	u32 wpa_versions;
	u32 cipher_group;
	int n_ciphers_pairwise;
	u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES];
	int n_akm_suites;
	u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
	bool control_port;
	__be16 control_port_ethertype;
	bool control_port_no_encrypt;
};

366 367 368 369 370 371 372 373 374 375 376 377 378
/**
 * struct beacon_parameters - beacon parameters
 *
 * Used to configure the beacon for an interface.
 *
 * @head: head portion of beacon (before TIM IE)
 *     or %NULL if not changed
 * @tail: tail portion of beacon (after TIM IE)
 *     or %NULL if not changed
 * @interval: beacon interval or zero if not changed
 * @dtim_period: DTIM period or zero if not changed
 * @head_len: length of @head
 * @tail_len: length of @tail
379 380 381 382
 * @ssid: SSID to be used in the BSS (note: may be %NULL if not provided from
 *	user space)
 * @ssid_len: length of @ssid
 * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames
383 384 385
 * @crypto: crypto settings
 * @privacy: the BSS uses privacy
 * @auth_type: Authentication type (algorithm)
386 387 388 389 390 391 392 393
 * @beacon_ies: extra information element(s) to add into Beacon frames or %NULL
 * @beacon_ies_len: length of beacon_ies in octets
 * @proberesp_ies: extra information element(s) to add into Probe Response
 *	frames or %NULL
 * @proberesp_ies_len: length of proberesp_ies in octets
 * @assocresp_ies: extra information element(s) to add into (Re)Association
 *	Response frames or %NULL
 * @assocresp_ies_len: length of assocresp_ies in octets
394 395
 * @probe_resp_len: length of probe response template (@probe_resp)
 * @probe_resp: probe response template (AP mode only)
396 397 398 399 400
 */
struct beacon_parameters {
	u8 *head, *tail;
	int interval, dtim_period;
	int head_len, tail_len;
401 402 403
	const u8 *ssid;
	size_t ssid_len;
	enum nl80211_hidden_ssid hidden_ssid;
404 405 406
	struct cfg80211_crypto_settings crypto;
	bool privacy;
	enum nl80211_auth_type auth_type;
407 408 409 410 411 412
	const u8 *beacon_ies;
	size_t beacon_ies_len;
	const u8 *proberesp_ies;
	size_t proberesp_ies_len;
	const u8 *assocresp_ies;
	size_t assocresp_ies_len;
413 414
	int probe_resp_len;
	u8 *probe_resp;
415 416
};

417 418 419 420 421
/**
 * enum plink_action - actions to perform in mesh peers
 *
 * @PLINK_ACTION_INVALID: action 0 is reserved
 * @PLINK_ACTION_OPEN: start mesh peer link establishment
Johannes Berg's avatar
Johannes Berg committed
422
 * @PLINK_ACTION_BLOCK: block traffic from this mesh peer
423 424 425 426 427 428 429
 */
enum plink_actions {
	PLINK_ACTION_INVALID,
	PLINK_ACTION_OPEN,
	PLINK_ACTION_BLOCK,
};

430 431 432 433 434 435 436 437 438 439 440
/**
 * enum station_parameters_apply_mask - station parameter values to apply
 * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
 *
 * Not all station parameters have in-band "no change" signalling,
 * for those that don't these flags will are used.
 */
enum station_parameters_apply_mask {
	STATION_PARAM_APPLY_UAPSD = BIT(0),
};

441 442 443 444 445 446 447 448 449
/**
 * struct station_parameters - station parameters
 *
 * Used to change and create a new station.
 *
 * @vlan: vlan interface station should belong to
 * @supported_rates: supported rates in IEEE 802.11 format
 *	(or NULL for no change)
 * @supported_rates_len: number of supported rates
450 451 452 453
 * @sta_flags_mask: station flags that changed
 *	(bitmask of BIT(NL80211_STA_FLAG_...))
 * @sta_flags_set: station flags values
 *	(bitmask of BIT(NL80211_STA_FLAG_...))
454 455
 * @listen_interval: listen interval or -1 for no change
 * @aid: AID or zero for no change
Johannes Berg's avatar
Johannes Berg committed
456
 * @plink_action: plink action to take
457
 * @plink_state: set the peer link state for a station
Johannes Berg's avatar
Johannes Berg committed
458
 * @ht_capa: HT capabilities of station
459 460 461 462
 * @uapsd_queues: bitmap of queues configured for uapsd. same format
 *	as the AC bitmap in the QoS info field
 * @max_sp: max Service Period. same format as the MAX_SP in the
 *	QoS info field (but already shifted down)
463 464 465
 * @sta_modify_mask: bitmap indicating which parameters changed
 *	(for those that don't have a natural "no change" value),
 *	see &enum station_parameters_apply_mask
466 467 468 469
 */
struct station_parameters {
	u8 *supported_rates;
	struct net_device *vlan;
470
	u32 sta_flags_mask, sta_flags_set;
471
	u32 sta_modify_mask;
472 473 474
	int listen_interval;
	u16 aid;
	u8 supported_rates_len;
475
	u8 plink_action;
476
	u8 plink_state;
477
	struct ieee80211_ht_cap *ht_capa;
478 479
	u8 uapsd_queues;
	u8 max_sp;
480 481
};

482
/**
483
 * enum station_info_flags - station information flags
484
 *
485 486
 * Used by the driver to indicate which info in &struct station_info
 * it has filled in during get_station() or dump_station().
487
 *
488 489 490 491 492 493
 * @STATION_INFO_INACTIVE_TIME: @inactive_time filled
 * @STATION_INFO_RX_BYTES: @rx_bytes filled
 * @STATION_INFO_TX_BYTES: @tx_bytes filled
 * @STATION_INFO_LLID: @llid filled
 * @STATION_INFO_PLID: @plid filled
 * @STATION_INFO_PLINK_STATE: @plink_state filled
494
 * @STATION_INFO_SIGNAL: @signal filled
495
 * @STATION_INFO_TX_BITRATE: @txrate fields are filled
496
 *  (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
497 498
 * @STATION_INFO_RX_PACKETS: @rx_packets filled
 * @STATION_INFO_TX_PACKETS: @tx_packets filled
499 500
 * @STATION_INFO_TX_RETRIES: @tx_retries filled
 * @STATION_INFO_TX_FAILED: @tx_failed filled
501
 * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
502
 * @STATION_INFO_SIGNAL_AVG: @signal_avg filled
503
 * @STATION_INFO_RX_BITRATE: @rxrate fields are filled
504
 * @STATION_INFO_BSS_PARAM: @bss_param filled
505
 * @STATION_INFO_CONNECTED_TIME: @connected_time filled
506
 * @STATION_INFO_ASSOC_REQ_IES: @assoc_req_ies filled
507
 * @STATION_INFO_STA_FLAGS: @sta_flags filled
508
 */
509 510 511 512 513 514 515
enum station_info_flags {
	STATION_INFO_INACTIVE_TIME	= 1<<0,
	STATION_INFO_RX_BYTES		= 1<<1,
	STATION_INFO_TX_BYTES		= 1<<2,
	STATION_INFO_LLID		= 1<<3,
	STATION_INFO_PLID		= 1<<4,
	STATION_INFO_PLINK_STATE	= 1<<5,
516 517
	STATION_INFO_SIGNAL		= 1<<6,
	STATION_INFO_TX_BITRATE		= 1<<7,
518 519
	STATION_INFO_RX_PACKETS		= 1<<8,
	STATION_INFO_TX_PACKETS		= 1<<9,
520 521
	STATION_INFO_TX_RETRIES		= 1<<10,
	STATION_INFO_TX_FAILED		= 1<<11,
522
	STATION_INFO_RX_DROP_MISC	= 1<<12,
523
	STATION_INFO_SIGNAL_AVG		= 1<<13,
524
	STATION_INFO_RX_BITRATE		= 1<<14,
525
	STATION_INFO_BSS_PARAM          = 1<<15,
526
	STATION_INFO_CONNECTED_TIME	= 1<<16,
527 528
	STATION_INFO_ASSOC_REQ_IES	= 1<<17,
	STATION_INFO_STA_FLAGS		= 1<<18
529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559
};

/**
 * enum station_info_rate_flags - bitrate info flags
 *
 * Used by the driver to indicate the specific rate transmission
 * type for 802.11n transmissions.
 *
 * @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled
 * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission
 * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
 */
enum rate_info_flags {
	RATE_INFO_FLAGS_MCS		= 1<<0,
	RATE_INFO_FLAGS_40_MHZ_WIDTH	= 1<<1,
	RATE_INFO_FLAGS_SHORT_GI	= 1<<2,
};

/**
 * struct rate_info - bitrate information
 *
 * Information about a receiving or transmitting bitrate
 *
 * @flags: bitflag of flags from &enum rate_info_flags
 * @mcs: mcs index if struct describes a 802.11n bitrate
 * @legacy: bitrate in 100kbit/s for 802.11abg
 */
struct rate_info {
	u8 flags;
	u8 mcs;
	u16 legacy;
560 561
};

562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592
/**
 * enum station_info_rate_flags - bitrate info flags
 *
 * Used by the driver to indicate the specific rate transmission
 * type for 802.11n transmissions.
 *
 * @BSS_PARAM_FLAGS_CTS_PROT: whether CTS protection is enabled
 * @BSS_PARAM_FLAGS_SHORT_PREAMBLE: whether short preamble is enabled
 * @BSS_PARAM_FLAGS_SHORT_SLOT_TIME: whether short slot time is enabled
 */
enum bss_param_flags {
	BSS_PARAM_FLAGS_CTS_PROT	= 1<<0,
	BSS_PARAM_FLAGS_SHORT_PREAMBLE	= 1<<1,
	BSS_PARAM_FLAGS_SHORT_SLOT_TIME	= 1<<2,
};

/**
 * struct sta_bss_parameters - BSS parameters for the attached station
 *
 * Information about the currently associated BSS
 *
 * @flags: bitflag of flags from &enum bss_param_flags
 * @dtim_period: DTIM period for the BSS
 * @beacon_interval: beacon interval
 */
struct sta_bss_parameters {
	u8 flags;
	u8 dtim_period;
	u16 beacon_interval;
};

593
/**
594
 * struct station_info - station information
595
 *
596
 * Station information filled by driver for get_station() and dump_station.
597
 *
598
 * @filled: bitflag of flags from &enum station_info_flags
599
 * @connected_time: time(in secs) since a station is last connected
600 601 602
 * @inactive_time: time since last station activity (tx/rx) in milliseconds
 * @rx_bytes: bytes received from this station
 * @tx_bytes: bytes transmitted to this station
603 604 605
 * @llid: mesh local link id
 * @plid: mesh peer link id
 * @plink_state: mesh peer link state
606
 * @signal: signal strength of last received packet in dBm
607
 * @signal_avg: signal strength average in dBm
608 609
 * @txrate: current unicast bitrate from this station
 * @rxrate: current unicast bitrate to this station
610 611
 * @rx_packets: packets received from this station
 * @tx_packets: packets transmitted to this station
612 613
 * @tx_retries: cumulative retry counts
 * @tx_failed: number of failed transmissions (retries exceeded, no ACK)
614
 * @rx_dropped_misc:  Dropped for un-specified reason.
615
 * @bss_param: current BSS parameters
616 617 618 619
 * @generation: generation number for nl80211 dumps.
 *	This number should increase every time the list of stations
 *	changes, i.e. when a station is added or removed, so that
 *	userspace can tell whether it got a consistent snapshot.
620 621 622 623 624
 * @assoc_req_ies: IEs from (Re)Association Request.
 *	This is used only when in AP mode with drivers that do not use
 *	user space MLME/SME implementation. The information is provided for
 *	the cfg80211_new_sta() calls to notify user space of the IEs.
 * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets.
625
 * @sta_flags: station flags mask & values
626
 */
627
struct station_info {
628
	u32 filled;
629
	u32 connected_time;
630 631 632
	u32 inactive_time;
	u32 rx_bytes;
	u32 tx_bytes;
633 634 635
	u16 llid;
	u16 plid;
	u8 plink_state;
636
	s8 signal;
637
	s8 signal_avg;
638
	struct rate_info txrate;
639
	struct rate_info rxrate;
640 641
	u32 rx_packets;
	u32 tx_packets;
642 643
	u32 tx_retries;
	u32 tx_failed;
644
	u32 rx_dropped_misc;
645
	struct sta_bss_parameters bss_param;
646
	struct nl80211_sta_flag_update sta_flags;
647 648

	int generation;
649 650 651

	const u8 *assoc_req_ies;
	size_t assoc_req_ies_len;
652 653 654 655 656

	/*
	 * Note: Add a new enum station_info_flags value for each new field and
	 * use it to check which fields are initialized.
	 */
657 658
};

659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678
/**
 * enum monitor_flags - monitor flags
 *
 * Monitor interface configuration flags. Note that these must be the bits
 * according to the nl80211 flags.
 *
 * @MONITOR_FLAG_FCSFAIL: pass frames with bad FCS
 * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP
 * @MONITOR_FLAG_CONTROL: pass control frames
 * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering
 * @MONITOR_FLAG_COOK_FRAMES: report frames after processing
 */
enum monitor_flags {
	MONITOR_FLAG_FCSFAIL		= 1<<NL80211_MNTR_FLAG_FCSFAIL,
	MONITOR_FLAG_PLCPFAIL		= 1<<NL80211_MNTR_FLAG_PLCPFAIL,
	MONITOR_FLAG_CONTROL		= 1<<NL80211_MNTR_FLAG_CONTROL,
	MONITOR_FLAG_OTHER_BSS		= 1<<NL80211_MNTR_FLAG_OTHER_BSS,
	MONITOR_FLAG_COOK_FRAMES	= 1<<NL80211_MNTR_FLAG_COOK_FRAMES,
};

679 680 681 682 683 684
/**
 * enum mpath_info_flags -  mesh path information flags
 *
 * Used by the driver to indicate which info in &struct mpath_info it has filled
 * in during get_station() or dump_station().
 *
Johannes Berg's avatar
Johannes Berg committed
685 686 687 688 689 690 691
 * @MPATH_INFO_FRAME_QLEN: @frame_qlen filled
 * @MPATH_INFO_SN: @sn filled
 * @MPATH_INFO_METRIC: @metric filled
 * @MPATH_INFO_EXPTIME: @exptime filled
 * @MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled
 * @MPATH_INFO_DISCOVERY_RETRIES: @discovery_retries filled
 * @MPATH_INFO_FLAGS: @flags filled
692 693 694
 */
enum mpath_info_flags {
	MPATH_INFO_FRAME_QLEN		= BIT(0),
695
	MPATH_INFO_SN			= BIT(1),
696 697 698 699 700 701 702 703 704 705 706 707 708 709
	MPATH_INFO_METRIC		= BIT(2),
	MPATH_INFO_EXPTIME		= BIT(3),
	MPATH_INFO_DISCOVERY_TIMEOUT	= BIT(4),
	MPATH_INFO_DISCOVERY_RETRIES	= BIT(5),
	MPATH_INFO_FLAGS		= BIT(6),
};

/**
 * struct mpath_info - mesh path information
 *
 * Mesh path information filled by driver for get_mpath() and dump_mpath().
 *
 * @filled: bitfield of flags from &enum mpath_info_flags
 * @frame_qlen: number of queued frames for this destination
710
 * @sn: target sequence number
711 712 713 714 715
 * @metric: metric (cost) of this mesh path
 * @exptime: expiration time for the mesh path from now, in msecs
 * @flags: mesh path flags
 * @discovery_timeout: total mesh path discovery timeout, in msecs
 * @discovery_retries: mesh path discovery retries
716 717 718 719
 * @generation: generation number for nl80211 dumps.
 *	This number should increase every time the list of mesh paths
 *	changes, i.e. when a station is added or removed, so that
 *	userspace can tell whether it got a consistent snapshot.
720 721 722 723
 */
struct mpath_info {
	u32 filled;
	u32 frame_qlen;
724
	u32 sn;
725 726 727 728 729
	u32 metric;
	u32 exptime;
	u32 discovery_timeout;
	u8 discovery_retries;
	u8 flags;
730 731

	int generation;
732 733
};

734 735 736 737 738 739 740 741 742 743 744
/**
 * struct bss_parameters - BSS parameters
 *
 * Used to change BSS parameters (mainly for AP mode).
 *
 * @use_cts_prot: Whether to use CTS protection
 *	(0 = no, 1 = yes, -1 = do not change)
 * @use_short_preamble: Whether the use of short preambles is allowed
 *	(0 = no, 1 = yes, -1 = do not change)
 * @use_short_slot_time: Whether the use of short slot time is allowed
 *	(0 = no, 1 = yes, -1 = do not change)
745 746 747
 * @basic_rates: basic rates in IEEE 802.11 format
 *	(or NULL for no change)
 * @basic_rates_len: number of basic rates
748
 * @ap_isolate: do not forward packets between connected stations
749 750
 * @ht_opmode: HT Operation mode
 * 	(u16 = opmode, -1 = do not change)
751 752 753 754 755
 */
struct bss_parameters {
	int use_cts_prot;
	int use_short_preamble;
	int use_short_slot_time;
756 757
	u8 *basic_rates;
	u8 basic_rates_len;
758
	int ap_isolate;
759
	int ht_opmode;
760
};
761

762 763 764 765 766
/*
 * struct mesh_config - 802.11s mesh configuration
 *
 * These parameters can be changed while the mesh is active.
 */
767 768 769 770 771 772 773 774 775
struct mesh_config {
	/* Timeouts in ms */
	/* Mesh plink management parameters */
	u16 dot11MeshRetryTimeout;
	u16 dot11MeshConfirmTimeout;
	u16 dot11MeshHoldingTimeout;
	u16 dot11MeshMaxPeerLinks;
	u8  dot11MeshMaxRetries;
	u8  dot11MeshTTL;
776 777
	/* ttl used in path selection information elements */
	u8  element_ttl;
778 779 780 781 782 783 784 785
	bool auto_open_plinks;
	/* HWMP parameters */
	u8  dot11MeshHWMPmaxPREQretries;
	u32 path_refresh_time;
	u16 min_discovery_timeout;
	u32 dot11MeshHWMPactivePathTimeout;
	u16 dot11MeshHWMPpreqMinInterval;
	u16 dot11MeshHWMPnetDiameterTraversalTime;
786
	u8  dot11MeshHWMPRootMode;
787
	u16 dot11MeshHWMPRannInterval;
788 789 790 791 792
	/* This is missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol
	 * set to true only means that the station will announce others it's a
	 * mesh gate, but not necessarily using the gate announcement protocol.
	 * Still keeping the same nomenclature to be in sync with the spec. */
	bool  dot11MeshGateAnnouncementProtocol;
793 794
};

795 796 797 798
/**
 * struct mesh_setup - 802.11s mesh setup configuration
 * @mesh_id: the mesh ID
 * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes
799 800
 * @path_sel_proto: which path selection protocol to use
 * @path_metric: which metric to use
801 802
 * @ie: vendor information elements (optional)
 * @ie_len: length of vendor information elements
803 804
 * @is_authenticated: this mesh requires authentication
 * @is_secure: this mesh uses security
805
 * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a]
806 807 808 809 810 811
 *
 * These parameters are fixed when the mesh is created.
 */
struct mesh_setup {
	const u8 *mesh_id;
	u8 mesh_id_len;
812 813
	u8  path_sel_proto;
	u8  path_metric;
814 815
	const u8 *ie;
	u8 ie_len;
816
	bool is_authenticated;
817
	bool is_secure;
818
	int mcast_rate[IEEE80211_NUM_BANDS];
819 820
};

821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838
/**
 * struct ieee80211_txq_params - TX queue parameters
 * @queue: TX queue identifier (NL80211_TXQ_Q_*)
 * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
 * @cwmin: Minimum contention window [a value of the form 2^n-1 in the range
 *	1..32767]
 * @cwmax: Maximum contention window [a value of the form 2^n-1 in the range
 *	1..32767]
 * @aifs: Arbitration interframe space [0..255]
 */
struct ieee80211_txq_params {
	enum nl80211_txq_q queue;
	u16 txop;
	u16 cwmin;
	u16 cwmax;
	u8 aifs;
};

839 840 841
/* from net/wireless.h */
struct wiphy;

842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863
/**
 * DOC: Scanning and BSS list handling
 *
 * The scanning process itself is fairly simple, but cfg80211 offers quite
 * a bit of helper functionality. To start a scan, the scan operation will
 * be invoked with a scan definition. This scan definition contains the
 * channels to scan, and the SSIDs to send probe requests for (including the
 * wildcard, if desired). A passive scan is indicated by having no SSIDs to
 * probe. Additionally, a scan request may contain extra information elements
 * that should be added to the probe request. The IEs are guaranteed to be
 * well-formed, and will not exceed the maximum length the driver advertised
 * in the wiphy structure.
 *
 * When scanning finds a BSS, cfg80211 needs to be notified of that, because
 * it is responsible for maintaining the BSS list; the driver should not
 * maintain a list itself. For this notification, various functions exist.
 *
 * Since drivers do not maintain a BSS list, there are also a number of
 * functions to search for a BSS and obtain information about it from the
 * BSS structure cfg80211 maintains. The BSS list is also made available
 * to userspace.
 */
864

865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880
/**
 * struct cfg80211_ssid - SSID description
 * @ssid: the SSID
 * @ssid_len: length of the ssid
 */
struct cfg80211_ssid {
	u8 ssid[IEEE80211_MAX_SSID_LEN];
	u8 ssid_len;
};

/**
 * struct cfg80211_scan_request - scan request description
 *
 * @ssids: SSIDs to scan for (active scan only)
 * @n_ssids: number of SSIDs
 * @channels: channels to scan on.
881
 * @n_channels: total number of channels to scan
882 883
 * @ie: optional information element(s) to add into Probe Request or %NULL
 * @ie_len: length of ie in octets
884
 * @rates: bitmap of rates to advertise for each band
885
 * @wiphy: the wiphy this was for
886
 * @dev: the interface
Johannes Berg's avatar
Johannes Berg committed
887
 * @aborted: (internal) scan request was notified as aborted
888
 * @no_cck: used to send probe requests at non CCK rate in 2GHz band
889 890 891 892 893
 */
struct cfg80211_scan_request {
	struct cfg80211_ssid *ssids;
	int n_ssids;
	u32 n_channels;
894
	const u8 *ie;
895
	size_t ie_len;
896

897 898
	u32 rates[IEEE80211_NUM_BANDS];

899 900
	/* internal */
	struct wiphy *wiphy;
901
	struct net_device *dev;
Johannes Berg's avatar
Johannes Berg committed
902
	bool aborted;
903
	bool no_cck;
904 905 906

	/* keep last */
	struct ieee80211_channel *channels[0];
907 908
};

909 910 911 912 913 914 915 916 917
/**
 * struct cfg80211_match_set - sets of attributes to match
 *
 * @ssid: SSID to be matched
 */
struct cfg80211_match_set {
	struct cfg80211_ssid ssid;
};

918 919 920 921 922 923
/**
 * struct cfg80211_sched_scan_request - scheduled scan request description
 *
 * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
 * @n_ssids: number of SSIDs
 * @n_channels: total number of channels to scan
924
 * @interval: interval between each scheduled scan cycle
925 926
 * @ie: optional information element(s) to add into Probe Request or %NULL
 * @ie_len: length of ie in octets
927 928 929 930 931
 * @match_sets: sets of parameters to be matched for a scan result
 * 	entry to be considered valid and to be passed to the host
 * 	(others are filtered out).
 *	If ommited, all results are passed.
 * @n_match_sets: number of match sets
932 933 934 935 936 937 938 939
 * @wiphy: the wiphy this was for
 * @dev: the interface
 * @channels: channels to scan
 */
struct cfg80211_sched_scan_request {
	struct cfg80211_ssid *ssids;
	int n_ssids;
	u32 n_channels;
940
	u32 interval;
941 942
	const u8 *ie;
	size_t ie_len;
943 944
	struct cfg80211_match_set *match_sets;
	int n_match_sets;
945 946 947 948 949 950 951 952 953

	/* internal */
	struct wiphy *wiphy;
	struct net_device *dev;

	/* keep last */
	struct ieee80211_channel *channels[0];
};

954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972
/**
 * enum cfg80211_signal_type - signal type
 *
 * @CFG80211_SIGNAL_TYPE_NONE: no signal strength information available
 * @CFG80211_SIGNAL_TYPE_MBM: signal strength in mBm (100*dBm)
 * @CFG80211_SIGNAL_TYPE_UNSPEC: signal strength, increasing from 0 through 100
 */
enum cfg80211_signal_type {
	CFG80211_SIGNAL_TYPE_NONE,
	CFG80211_SIGNAL_TYPE_MBM,
	CFG80211_SIGNAL_TYPE_UNSPEC,
};

/**
 * struct cfg80211_bss - BSS description
 *
 * This structure describes a BSS (which may also be a mesh network)
 * for use in scan results and similar.
 *
Johannes Berg's avatar
Johannes Berg committed
973
 * @channel: channel this BSS is on
974 975 976 977 978
 * @bssid: BSSID of the BSS
 * @tsf: timestamp of last received update
 * @beacon_interval: the beacon interval as from the frame
 * @capability: the capability field in host byte order
 * @information_elements: the information elements (Note that there
979 980 981
 *	is no guarantee that these are well-formed!); this is a pointer to
 *	either the beacon_ies or proberesp_ies depending on whether Probe
 *	Response frame has been received
982
 * @len_information_elements: total length of the information elements
983 984 985 986
 * @beacon_ies: the information elements from the last Beacon frame
 * @len_beacon_ies: total length of the beacon_ies
 * @proberesp_ies: the information elements from the last Probe Response frame
 * @len_proberesp_ies: total length of the proberesp_ies
Johannes Berg's avatar
Johannes Berg committed
987
 * @signal: signal strength value (type depends on the wiphy's signal_type)
988
 * @free_priv: function pointer to free private data
989 990 991 992 993 994 995 996 997 998 999
 * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes
 */
struct cfg80211_bss {
	struct ieee80211_channel *channel;

	u8 bssid[ETH_ALEN];
	u64 tsf;
	u16 beacon_interval;
	u16 capability;
	u8 *information_elements;
	size_t len_information_elements;
1000 1001 1002 1003
	u8 *beacon_ies;
	size_t len_beacon_ies;
	u8 *proberesp_ies;
	size_t len_proberesp_ies;
1004 1005 1006

	s32 signal;

1007
	void (*free_priv)(struct cfg80211_bss *bss);
1008 1009 1010
	u8 priv[0] __attribute__((__aligned__(sizeof(void *))));
};

1011 1012 1013 1014 1015 1016 1017 1018 1019
/**
 * ieee80211_bss_get_ie - find IE with given ID
 * @bss: the bss to search
 * @ie: the IE ID
 * Returns %NULL if not found.
 */
const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);


1020 1021 1022 1023 1024
/**
 * struct cfg80211_auth_request - Authentication request data
 *
 * This structure provides information needed to complete IEEE 802.11
 * authentication.
Johannes Berg's avatar
Johannes Berg committed
1025 1026
 *
 * @bss: The BSS to authenticate with.
1027 1028 1029
 * @auth_type: Authentication type (algorithm)
 * @ie: Extra IEs to add to Authentication frame or %NULL
 * @ie_len: Length of ie buffer in octets
Johannes Berg's avatar
Johannes Berg committed
1030 1031 1032
 * @key_len: length of WEP key for shared key authentication
 * @key_idx: index of WEP key for shared key authentication
 * @key: WEP key for shared key authentication
1033 1034 1035 1036
 * @local_state_change: This is a request for a local state only, i.e., no
 *	Authentication frame is to be transmitted and authentication state is
 *	to be changed without having to wait for a response from the peer STA
 *	(AP).
1037 1038
 */
struct cfg80211_auth_request {
Johannes Berg's avatar
Johannes Berg committed
1039
	struct cfg80211_bss *bss;
1040 1041
	const u8 *ie;
	size_t ie_len;
Johannes Berg's avatar
Johannes Berg committed
1042
	enum nl80211_auth_type auth_type;
Johannes Berg's avatar
Johannes Berg committed
1043 1044
	const u8 *key;
	u8 key_len, key_idx;
1045
	bool local_state_change;
1046 1047
};

1048 1049 1050 1051 1052 1053 1054 1055 1056
/**
 * enum cfg80211_assoc_req_flags - Over-ride default behaviour in association.
 *
 * @ASSOC_REQ_DISABLE_HT:  Disable HT (802.11n)
 */
enum cfg80211_assoc_req_flags {
	ASSOC_REQ_DISABLE_HT		= BIT(0),
};

1057 1058 1059 1060 1061
/**
 * struct cfg80211_assoc_request - (Re)Association request data
 *
 * This structure provides information needed to complete IEEE 802.11
 * (re)association.
Johannes Berg's avatar
Johannes Berg committed
1062
 * @bss: The BSS to associate with.
1063 1064
 * @ie: Extra IEs to add to (Re)Association Request frame or %NULL
 * @ie_len: Length of ie buffer in octets
1065
 * @use_mfp: Use management frame protection (IEEE 802.11w) in this association
1066
 * @crypto: crypto settings
1067
 * @prev_bssid: previous BSSID, if not %NULL use reassociate frame
1068 1069 1070 1071
 * @flags:  See &enum cfg80211_assoc_req_flags
 * @ht_capa:  HT Capabilities over-rides.  Values set in ht_capa_mask
 *   will be used in ht_capa.  Un-supported values will be ignored.
 * @ht_capa_mask:  The bits of ht_capa which are to be used.
1072 1073
 */
struct cfg80211_assoc_request {
Johannes Berg's avatar
Johannes Berg committed
1074
	struct cfg80211_bss *bss;
1075
	const u8 *ie, *prev_bssid;
1076
	size_t ie_len;
1077
	struct cfg80211_crypto_settings crypto;
Johannes Berg's avatar
Johannes Berg committed
1078
	bool use_mfp;
1079 1080 1081
	u32 flags;
	struct ieee80211_ht_cap ht_capa;
	struct ieee80211_ht_cap ht_capa_mask;
1082 1083 1084 1085 1086 1087 1088 1089
};

/**
 * struct cfg80211_deauth_request - Deauthentication request data
 *
 * This structure provides information needed to complete IEEE 802.11
 * deauthentication.
 *
Johannes Berg's avatar
Johannes Berg committed
1090
 * @bss: the BSS to deauthenticate from
1091 1092
 * @ie: Extra IEs to add to Deauthentication frame or %NULL
 * @ie_len: Length of ie buffer in octets
Johannes Berg's avatar
Johannes Berg committed
1093
 * @reason_code: The reason code for the deauthentication
1094 1095
 * @local_state_change: This is a request for a local state only, i.e., no
 *	Deauthentication frame is to be transmitted.
1096 1097
 */
struct cfg80211_deauth_request {
Johannes Berg's avatar
Johannes Berg committed
1098
	struct cfg80211_bss *bss;
1099 1100
	const u8 *ie;
	size_t ie_len;
Johannes Berg's avatar
Johannes Berg committed
1101
	u16 reason_code;
1102
	bool local_state_change;
1103 1104 1105 1106 1107 1108 1109 1110
};

/**
 * struct cfg80211_disassoc_request - Disassociation request data
 *
 * This structure provides information needed to complete IEEE 802.11
 * disassocation.
 *
Johannes Berg's avatar
Johannes Berg committed
1111
 * @bss: the BSS to disassociate from
1112 1113
 * @ie: Extra IEs to add to Disassociation frame or %NULL
 * @ie_len: Length of ie buffer in octets
Johannes Berg's avatar
Johannes Berg committed
1114
 * @reason_code: The reason code for the disassociation
1115 1116
 * @local_state_change: This is a request for a local state only, i.e., no
 *	Disassociation frame is to be transmitted.
1117 1118
 */
struct cfg80211_disassoc_request {
Johannes Berg's avatar
Johannes Berg committed
1119
	struct cfg80211_bss *bss;
1120 1121
	const u8 *ie;
	size_t ie_len;
Johannes Berg's avatar
Johannes Berg committed
1122
	u16 reason_code;
1123
	bool local_state_change;
1124 1125
};

Johannes Berg's avatar
Johannes Berg committed
1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140
/**
 * struct cfg80211_ibss_params - IBSS parameters
 *
 * This structure defines the IBSS parameters for the join_ibss()
 * method.
 *
 * @ssid: The SSID, will always be non-null.
 * @ssid_len: The length of the SSID, will always be non-zero.
 * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not
 *	search for IBSSs with a different BSSID.
 * @channel: The channel to use if no IBSS can be found to join.
 * @channel_fixed: The channel should be fixed -- do not search for
 *	IBSSs to join on other channels.
 * @ie: information element(s) to include in the beacon
 * @ie_len: length of that
1141
 * @beacon_interval: beacon interval to use
Johannes Berg's avatar
Johannes Berg committed
1142 1143
 * @privacy: this is a protected network, keys will be configured
 *	after joining
1144
 * @basic_rates: bitmap of basic rates to use when creating the IBSS
1145
 * @mcast_rate: per-band multicast rate index + 1 (0: disabled)
Johannes Berg's avatar
Johannes Berg committed
1146 1147 1148 1149 1150 1151 1152
 */
struct cfg80211_ibss_params {
	u8 *ssid;
	u8 *bssid;
	struct ieee80211_channel *channel;
	u8 *ie;
	u8 ssid_len, ie_len;
1153
	u16 beacon_interval;
1154
	u32 basic_rates;
Johannes Berg's avatar
Johannes Berg committed
1155
	bool channel_fixed;
Johannes Berg's avatar
Johannes Berg committed
1156
	bool privacy;
1157
	int mcast_rate[IEEE80211_NUM_BANDS];
Johannes Berg's avatar
Johannes Berg committed
1158 1159
};

1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172
/**
 * struct cfg80211_connect_params - Connection parameters
 *
 * This structure provides information needed to complete IEEE 802.11
 * authentication and association.
 *
 * @channel: The channel to use or %NULL if not specified (auto-select based
 *	on scan results)
 * @bssid: The AP BSSID or %NULL if not specified (auto-select based on scan
 *	results)
 * @ssid: SSID
 * @ssid_len: Length of ssid in octets
 * @auth_type: Authentication type (algorithm)
Johannes Berg's avatar
Johannes Berg committed
1173 1174
 * @ie: IEs for association request
 * @ie_len: Length of assoc_ie in octets
1175 1176
 * @privacy: indicates whether privacy-enabled APs should be used
 * @crypto: crypto settings
Johannes Berg's avatar
Johannes Berg committed
1177 1178 1179
 * @key_len: length of WEP key for shared key authentication
 * @key_idx: index of WEP key for shared key authentication
 * @key: WEP key for shared key authentication
1180 1181 1182 1183
 * @flags:  See &enum cfg80211_assoc_req_flags
 * @ht_capa:  HT Capabilities over-rides.  Values set in ht_capa_mask
 *   will be used in ht_capa.  Un-supported values will be ignored.
 * @ht_capa_mask:  The bits of ht_capa which are to be used.
1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194
 */
struct cfg80211_connect_params {
	struct ieee80211_channel *channel;
	u8 *bssid;
	u8 *ssid;
	size_t ssid_len;
	enum nl80211_auth_type auth_type;
	u8 *ie;
	size_t ie_len;
	bool privacy;
	struct cfg80211_crypto_settings crypto;
Johannes Berg's avatar
Johannes Berg committed
1195 1196
	const u8 *key;
	u8 key_len, key_idx;
1197 1198 1199
	u32 flags;
	struct ieee80211_ht_cap ht_capa;
	struct ieee80211_ht_cap ht_capa_mask;
1200 1201
};

1202 1203
/**
 * enum wiphy_params_flags - set_wiphy_params bitfield values
Johannes Berg's avatar
Johannes Berg committed
1204 1205 1206 1207 1208
 * @WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed
 * @WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed
 * @WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed
 * @WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed
 * @WIPHY_PARAM_COVERAGE_CLASS: coverage class changed
1209 1210 1211 1212 1213 1214
 */
enum wiphy_params_flags {
	WIPHY_PARAM_RETRY_SHORT		= 1 << 0,
	WIPHY_PARAM_RETRY_LONG		= 1 << 1,
	WIPHY_PARAM_FRAG_THRESHOLD	= 1 << 2,
	WIPHY_PARAM_RTS_THRESHOLD	= 1 << 3,
1215
	WIPHY_PARAM_COVERAGE_CLASS	= 1 << 4,
1216 1217
};

Johannes Berg's avatar
Johannes Berg committed
1218 1219 1220 1221 1222 1223
/*
 * cfg80211_bitrate_mask - masks for bitrate control
 */
struct cfg80211_bitrate_mask {
	struct {
		u32 legacy;
1224 1225
		/* TODO: add support for masking MCS rates; e.g.: */
		/* u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; */
Johannes Berg's avatar
Johannes Berg committed
1226 1227
	} control[IEEE80211_NUM_BANDS];
};
Samuel Ortiz's avatar
Samuel Ortiz committed
1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240
/**
 * struct cfg80211_pmksa - PMK Security Association
 *
 * This structure is passed to the set/del_pmksa() method for PMKSA
 * caching.
 *
 * @bssid: The AP's BSSID.
 * @pmkid: The PMK material itself.
 */
struct cfg80211_pmksa {
	u8 *bssid;
	u8 *pmkid;
};
Johannes Berg's avatar
Johannes Berg committed
1241

1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266
/**
 * struct cfg80211_wowlan_trig_pkt_pattern - packet pattern
 * @mask: bitmask where to match pattern and where to ignore bytes,
 *	one bit per byte, in same format as nl80211
 * @pattern: bytes to match where bitmask is 1
 * @pattern_len: length of pattern (in bytes)
 *
 * Internal note: @mask and @pattern are allocated in one chunk of
 * memory, free @mask only!
 */
struct cfg80211_wowlan_trig_pkt_pattern {
	u8 *mask, *pattern;
	int pattern_len;
};

/**
 * struct cfg80211_wowlan - Wake on Wireless-LAN support info
 *
 * This structure defines the enabled WoWLAN triggers for the device.
 * @any: wake up on any activity -- special trigger if device continues
 *	operating as normal during suspend
 * @disconnect: wake up if getting disconnected
 * @magic_pkt: wake up on receiving magic packet
 * @patterns: wake up on receiving packet matching a pattern
 * @n_patterns: number of patterns
1267 1268 1269 1270
 * @gtk_rekey_failure: wake up on GTK rekey failure
 * @eap_identity_req: wake up on EAP identity request packet
 * @four_way_handshake: wake up on 4-way handshake
 * @rfkill_release: wake up when rfkill is released
1271 1272
 */
struct cfg80211_wowlan {
1273 1274 1275
	bool any, disconnect, magic_pkt, gtk_rekey_failure,
	     eap_identity_req, four_way_handshake,
	     rfkill_release;
1276 1277 1278 1279
	struct cfg80211_wowlan_trig_pkt_pattern *patterns;
	int n_patterns;
};

1280 1281 1282 1283 1284