hpt366.c 47.5 KB
Newer Older
Linus Torvalds's avatar
Linus Torvalds committed
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745
/*
 * linux/drivers/ide/pci/hpt366.c		Version 0.36	April 25, 2003
 *
 * Copyright (C) 1999-2003		Andre Hedrick <andre@linux-ide.org>
 * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
 * Portions Copyright (C) 2003		Red Hat Inc
 *
 * Thanks to HighPoint Technologies for their assistance, and hardware.
 * Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his
 * donation of an ABit BP6 mainboard, processor, and memory acellerated
 * development and support.
 *
 * Note that final HPT370 support was done by force extraction of GPL.
 *
 * - add function for getting/setting power status of drive
 * - the HPT370's state machine can get confused. reset it before each dma 
 *   xfer to prevent that from happening.
 * - reset state engine whenever we get an error.
 * - check for busmaster state at end of dma. 
 * - use new highpoint timings.
 * - detect bus speed using highpoint register.
 * - use pll if we don't have a clock table. added a 66MHz table that's
 *   just 2x the 33MHz table.
 * - removed turnaround. NOTE: we never want to switch between pll and
 *   pci clocks as the chip can glitch in those cases. the highpoint
 *   approved workaround slows everything down too much to be useful. in
 *   addition, we would have to serialize access to each chip.
 * 	Adrian Sun <a.sun@sun.com>
 *
 * add drive timings for 66MHz PCI bus,
 * fix ATA Cable signal detection, fix incorrect /proc info
 * add /proc display for per-drive PIO/DMA/UDMA mode and
 * per-channel ATA-33/66 Cable detect.
 * 	Duncan Laurie <void@sun.com>
 *
 * fixup /proc output for multiple controllers
 *	Tim Hockin <thockin@sun.com>
 *
 * On hpt366: 
 * Reset the hpt366 on error, reset on dma
 * Fix disabling Fast Interrupt hpt366.
 * 	Mike Waychison <crlf@sun.com>
 *
 * Added support for 372N clocking and clock switching. The 372N needs
 * different clocks on read/write. This requires overloading rw_disk and
 * other deeply crazy things. Thanks to <http://www.hoerstreich.de> for
 * keeping me sane. 
 *		Alan Cox <alan@redhat.com>
 *
 */


#include <linux/config.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>

#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>

#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/irq.h>

/* various tuning parameters */
#define HPT_RESET_STATE_ENGINE
#undef HPT_DELAY_INTERRUPT
#undef HPT_SERIALIZE_IO

static const char *quirk_drives[] = {
	"QUANTUM FIREBALLlct08 08",
	"QUANTUM FIREBALLP KA6.4",
	"QUANTUM FIREBALLP LM20.4",
	"QUANTUM FIREBALLP LM20.5",
	NULL
};

static const char *bad_ata100_5[] = {
	"IBM-DTLA-307075",
	"IBM-DTLA-307060",
	"IBM-DTLA-307045",
	"IBM-DTLA-307030",
	"IBM-DTLA-307020",
	"IBM-DTLA-307015",
	"IBM-DTLA-305040",
	"IBM-DTLA-305030",
	"IBM-DTLA-305020",
	"IC35L010AVER07-0",
	"IC35L020AVER07-0",
	"IC35L030AVER07-0",
	"IC35L040AVER07-0",
	"IC35L060AVER07-0",
	"WDC AC310200R",
	NULL
};

static const char *bad_ata66_4[] = {
	"IBM-DTLA-307075",
	"IBM-DTLA-307060",
	"IBM-DTLA-307045",
	"IBM-DTLA-307030",
	"IBM-DTLA-307020",
	"IBM-DTLA-307015",
	"IBM-DTLA-305040",
	"IBM-DTLA-305030",
	"IBM-DTLA-305020",
	"IC35L010AVER07-0",
	"IC35L020AVER07-0",
	"IC35L030AVER07-0",
	"IC35L040AVER07-0",
	"IC35L060AVER07-0",
	"WDC AC310200R",
	NULL
};

static const char *bad_ata66_3[] = {
	"WDC AC310200R",
	NULL
};

static const char *bad_ata33[] = {
	"Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2",
	"Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2",
	"Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4",
	"Maxtor 90510D4",
	"Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2",
	"Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4",
	"Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2",
	NULL
};

struct chipset_bus_clock_list_entry {
	u8		xfer_speed;
	unsigned int	chipset_settings;
};

/* key for bus clock timings
 * bit
 * 0:3    data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW
 *        DMA. cycles = value + 1
 * 4:8    data_low_time. active time of DIOW_/DIOR_ for PIO and MW
 *        DMA. cycles = value + 1
 * 9:12   cmd_high_time. inactive time of DIOW_/DIOR_ during task file
 *        register access.
 * 13:17  cmd_low_time. active time of DIOW_/DIOR_ during task file
 *        register access.
 * 18:21  udma_cycle_time. clock freq and clock cycles for UDMA xfer.
 *        during task file register access.
 * 22:24  pre_high_time. time to initialize 1st cycle for PIO and MW DMA
 *        xfer.
 * 25:27  cmd_pre_high_time. time to initialize 1st PIO cycle for task
 *        register access.
 * 28     UDMA enable
 * 29     DMA enable
 * 30     PIO_MST enable. if set, the chip is in bus master mode during
 *        PIO.
 * 31     FIFO enable.
 */
static struct chipset_bus_clock_list_entry forty_base_hpt366[] = {
	{	XFER_UDMA_4,	0x900fd943	},
	{	XFER_UDMA_3,	0x900ad943	},
	{	XFER_UDMA_2,	0x900bd943	},
	{	XFER_UDMA_1,	0x9008d943	},
	{	XFER_UDMA_0,	0x9008d943	},

	{	XFER_MW_DMA_2,	0xa008d943	},
	{	XFER_MW_DMA_1,	0xa010d955	},
	{	XFER_MW_DMA_0,	0xa010d9fc	},

	{	XFER_PIO_4,	0xc008d963	},
	{	XFER_PIO_3,	0xc010d974	},
	{	XFER_PIO_2,	0xc010d997	},
	{	XFER_PIO_1,	0xc010d9c7	},
	{	XFER_PIO_0,	0xc018d9d9	},
	{	0,		0x0120d9d9	}
};

static struct chipset_bus_clock_list_entry thirty_three_base_hpt366[] = {
	{	XFER_UDMA_4,	0x90c9a731	},
	{	XFER_UDMA_3,	0x90cfa731	},
	{	XFER_UDMA_2,	0x90caa731	},
	{	XFER_UDMA_1,	0x90cba731	},
	{	XFER_UDMA_0,	0x90c8a731	},

	{	XFER_MW_DMA_2,	0xa0c8a731	},
	{	XFER_MW_DMA_1,	0xa0c8a732	},	/* 0xa0c8a733 */
	{	XFER_MW_DMA_0,	0xa0c8a797	},

	{	XFER_PIO_4,	0xc0c8a731	},
	{	XFER_PIO_3,	0xc0c8a742	},
	{	XFER_PIO_2,	0xc0d0a753	},
	{	XFER_PIO_1,	0xc0d0a7a3	},	/* 0xc0d0a793 */
	{	XFER_PIO_0,	0xc0d0a7aa	},	/* 0xc0d0a7a7 */
	{	0,		0x0120a7a7	}
};

static struct chipset_bus_clock_list_entry twenty_five_base_hpt366[] = {
	{	XFER_UDMA_4,	0x90c98521	},
	{	XFER_UDMA_3,	0x90cf8521	},
	{	XFER_UDMA_2,	0x90cf8521	},
	{	XFER_UDMA_1,	0x90cb8521	},
	{	XFER_UDMA_0,	0x90cb8521	},

	{	XFER_MW_DMA_2,	0xa0ca8521	},
	{	XFER_MW_DMA_1,	0xa0ca8532	},
	{	XFER_MW_DMA_0,	0xa0ca8575	},

	{	XFER_PIO_4,	0xc0ca8521	},
	{	XFER_PIO_3,	0xc0ca8532	},
	{	XFER_PIO_2,	0xc0ca8542	},
	{	XFER_PIO_1,	0xc0d08572	},
	{	XFER_PIO_0,	0xc0d08585	},
	{	0,		0x01208585	}
};

/* from highpoint documentation. these are old values */
static struct chipset_bus_clock_list_entry thirty_three_base_hpt370[] = {
/*	{	XFER_UDMA_5,	0x1A85F442,	0x16454e31	}, */
	{	XFER_UDMA_5,	0x16454e31	},
	{	XFER_UDMA_4,	0x16454e31	},
	{	XFER_UDMA_3,	0x166d4e31	},
	{	XFER_UDMA_2,	0x16494e31	},
	{	XFER_UDMA_1,	0x164d4e31	},
	{	XFER_UDMA_0,	0x16514e31	},

	{	XFER_MW_DMA_2,	0x26514e21	},
	{	XFER_MW_DMA_1,	0x26514e33	},
	{	XFER_MW_DMA_0,	0x26514e97	},

	{	XFER_PIO_4,	0x06514e21	},
	{	XFER_PIO_3,	0x06514e22	},
	{	XFER_PIO_2,	0x06514e33	},
	{	XFER_PIO_1,	0x06914e43	},
	{	XFER_PIO_0,	0x06914e57	},
	{	0,		0x06514e57	}
};

static struct chipset_bus_clock_list_entry sixty_six_base_hpt370[] = {
	{	XFER_UDMA_5,	0x14846231	},
	{	XFER_UDMA_4,	0x14886231	},
	{	XFER_UDMA_3,	0x148c6231	},
	{	XFER_UDMA_2,	0x148c6231	},
	{	XFER_UDMA_1,	0x14906231	},
	{	XFER_UDMA_0,	0x14986231	},

	{	XFER_MW_DMA_2,	0x26514e21	},
	{	XFER_MW_DMA_1,	0x26514e33	},
	{	XFER_MW_DMA_0,	0x26514e97	},

	{	XFER_PIO_4,	0x06514e21	},
	{	XFER_PIO_3,	0x06514e22	},
	{	XFER_PIO_2,	0x06514e33	},
	{	XFER_PIO_1,	0x06914e43	},
	{	XFER_PIO_0,	0x06914e57	},
	{	0,		0x06514e57	}
};

/* these are the current (4 sep 2001) timings from highpoint */
static struct chipset_bus_clock_list_entry thirty_three_base_hpt370a[] = {
	{	XFER_UDMA_5,	0x12446231	},
	{	XFER_UDMA_4,	0x12446231	},
	{	XFER_UDMA_3,	0x126c6231	},
	{	XFER_UDMA_2,	0x12486231	},
	{	XFER_UDMA_1,	0x124c6233	},
	{	XFER_UDMA_0,	0x12506297	},

	{	XFER_MW_DMA_2,	0x22406c31	},
	{	XFER_MW_DMA_1,	0x22406c33	},
	{	XFER_MW_DMA_0,	0x22406c97	},

	{	XFER_PIO_4,	0x06414e31	},
	{	XFER_PIO_3,	0x06414e42	},
	{	XFER_PIO_2,	0x06414e53	},
	{	XFER_PIO_1,	0x06814e93	},
	{	XFER_PIO_0,	0x06814ea7	},
	{	0,		0x06814ea7	}
};

/* 2x 33MHz timings */
static struct chipset_bus_clock_list_entry sixty_six_base_hpt370a[] = {
	{	XFER_UDMA_5,	0x1488e673	},
	{	XFER_UDMA_4,	0x1488e673	},
	{	XFER_UDMA_3,	0x1498e673	},
	{	XFER_UDMA_2,	0x1490e673	},
	{	XFER_UDMA_1,	0x1498e677	},
	{	XFER_UDMA_0,	0x14a0e73f	},

	{	XFER_MW_DMA_2,	0x2480fa73	},
	{	XFER_MW_DMA_1,	0x2480fa77	}, 
	{	XFER_MW_DMA_0,	0x2480fb3f	},

	{	XFER_PIO_4,	0x0c82be73	},
	{	XFER_PIO_3,	0x0c82be95	},
	{	XFER_PIO_2,	0x0c82beb7	},
	{	XFER_PIO_1,	0x0d02bf37	},
	{	XFER_PIO_0,	0x0d02bf5f	},
	{	0,		0x0d02bf5f	}
};

static struct chipset_bus_clock_list_entry fifty_base_hpt370a[] = {
	{	XFER_UDMA_5,	0x12848242	},
	{	XFER_UDMA_4,	0x12ac8242	},
	{	XFER_UDMA_3,	0x128c8242	},
	{	XFER_UDMA_2,	0x120c8242	},
	{	XFER_UDMA_1,	0x12148254	},
	{	XFER_UDMA_0,	0x121882ea	},

	{	XFER_MW_DMA_2,	0x22808242	},
	{	XFER_MW_DMA_1,	0x22808254	},
	{	XFER_MW_DMA_0,	0x228082ea	},

	{	XFER_PIO_4,	0x0a81f442	},
	{	XFER_PIO_3,	0x0a81f443	},
	{	XFER_PIO_2,	0x0a81f454	},
	{	XFER_PIO_1,	0x0ac1f465	},
	{	XFER_PIO_0,	0x0ac1f48a	},
	{	0,		0x0ac1f48a	}
};

static struct chipset_bus_clock_list_entry thirty_three_base_hpt372[] = {
	{	XFER_UDMA_6,	0x1c81dc62	},
	{	XFER_UDMA_5,	0x1c6ddc62	},
	{	XFER_UDMA_4,	0x1c8ddc62	},
	{	XFER_UDMA_3,	0x1c8edc62	},	/* checkme */
	{	XFER_UDMA_2,	0x1c91dc62	},
	{	XFER_UDMA_1,	0x1c9adc62	},	/* checkme */
	{	XFER_UDMA_0,	0x1c82dc62	},	/* checkme */

	{	XFER_MW_DMA_2,	0x2c829262	},
	{	XFER_MW_DMA_1,	0x2c829266	},	/* checkme */
	{	XFER_MW_DMA_0,	0x2c82922e	},	/* checkme */

	{	XFER_PIO_4,	0x0c829c62	},
	{	XFER_PIO_3,	0x0c829c84	},
	{	XFER_PIO_2,	0x0c829ca6	},
	{	XFER_PIO_1,	0x0d029d26	},
	{	XFER_PIO_0,	0x0d029d5e	},
	{	0,		0x0d029d5e	}
};

static struct chipset_bus_clock_list_entry fifty_base_hpt372[] = {
	{	XFER_UDMA_5,	0x12848242	},
	{	XFER_UDMA_4,	0x12ac8242	},
	{	XFER_UDMA_3,	0x128c8242	},
	{	XFER_UDMA_2,	0x120c8242	},
	{	XFER_UDMA_1,	0x12148254	},
	{	XFER_UDMA_0,	0x121882ea	},

	{	XFER_MW_DMA_2,	0x22808242	},
	{	XFER_MW_DMA_1,	0x22808254	},
	{	XFER_MW_DMA_0,	0x228082ea	},

	{	XFER_PIO_4,	0x0a81f442	},
	{	XFER_PIO_3,	0x0a81f443	},
	{	XFER_PIO_2,	0x0a81f454	},
	{	XFER_PIO_1,	0x0ac1f465	},
	{	XFER_PIO_0,	0x0ac1f48a	},
	{	0,		0x0a81f443	}
};

static struct chipset_bus_clock_list_entry sixty_six_base_hpt372[] = {
	{	XFER_UDMA_6,	0x1c869c62	},
	{	XFER_UDMA_5,	0x1cae9c62	},
	{	XFER_UDMA_4,	0x1c8a9c62	},
	{	XFER_UDMA_3,	0x1c8e9c62	},
	{	XFER_UDMA_2,	0x1c929c62	},
	{	XFER_UDMA_1,	0x1c9a9c62	},
	{	XFER_UDMA_0,	0x1c829c62	},

	{	XFER_MW_DMA_2,	0x2c829c62	},
	{	XFER_MW_DMA_1,	0x2c829c66	},
	{	XFER_MW_DMA_0,	0x2c829d2e	},

	{	XFER_PIO_4,	0x0c829c62	},
	{	XFER_PIO_3,	0x0c829c84	},
	{	XFER_PIO_2,	0x0c829ca6	},
	{	XFER_PIO_1,	0x0d029d26	},
	{	XFER_PIO_0,	0x0d029d5e	},
	{	0,		0x0d029d26	}
};

static struct chipset_bus_clock_list_entry thirty_three_base_hpt374[] = {
	{	XFER_UDMA_6,	0x12808242	},
	{	XFER_UDMA_5,	0x12848242	},
	{	XFER_UDMA_4,	0x12ac8242	},
	{	XFER_UDMA_3,	0x128c8242	},
	{	XFER_UDMA_2,	0x120c8242	},
	{	XFER_UDMA_1,	0x12148254	},
	{	XFER_UDMA_0,	0x121882ea	},

	{	XFER_MW_DMA_2,	0x22808242	},
	{	XFER_MW_DMA_1,	0x22808254	},
	{	XFER_MW_DMA_0,	0x228082ea	},

	{	XFER_PIO_4,	0x0a81f442	},
	{	XFER_PIO_3,	0x0a81f443	},
	{	XFER_PIO_2,	0x0a81f454	},
	{	XFER_PIO_1,	0x0ac1f465	},
	{	XFER_PIO_0,	0x0ac1f48a	},
	{	0,		0x06814e93	}
};

/* FIXME: 50MHz timings for HPT374 */

#if 0
static struct chipset_bus_clock_list_entry sixty_six_base_hpt374[] = {
	{	XFER_UDMA_6,	0x12406231	},	/* checkme */
	{	XFER_UDMA_5,	0x12446231	},	/* 0x14846231 */
	{	XFER_UDMA_4,	0x16814ea7	},	/* 0x14886231 */
	{	XFER_UDMA_3,	0x16814ea7	},	/* 0x148c6231 */
	{	XFER_UDMA_2,	0x16814ea7	},	/* 0x148c6231 */
	{	XFER_UDMA_1,	0x16814ea7	},	/* 0x14906231 */
	{	XFER_UDMA_0,	0x16814ea7	},	/* 0x14986231 */
	{	XFER_MW_DMA_2,	0x16814ea7	},	/* 0x26514e21 */
	{	XFER_MW_DMA_1,	0x16814ea7	},	/* 0x26514e97 */
	{	XFER_MW_DMA_0,	0x16814ea7	},	/* 0x26514e97 */
	{	XFER_PIO_4,	0x06814ea7	},	/* 0x06514e21 */
	{	XFER_PIO_3,	0x06814ea7	},	/* 0x06514e22 */
	{	XFER_PIO_2,	0x06814ea7	},	/* 0x06514e33 */
	{	XFER_PIO_1,	0x06814ea7	},	/* 0x06914e43 */
	{	XFER_PIO_0,	0x06814ea7	},	/* 0x06914e57 */
	{	0,		0x06814ea7	}
};
#endif

#define HPT366_DEBUG_DRIVE_INFO		0
#define HPT374_ALLOW_ATA133_6		0
#define HPT371_ALLOW_ATA133_6		0
#define HPT302_ALLOW_ATA133_6		0
#define HPT372_ALLOW_ATA133_6		1
#define HPT370_ALLOW_ATA100_5		1
#define HPT366_ALLOW_ATA66_4		1
#define HPT366_ALLOW_ATA66_3		1
#define HPT366_MAX_DEVS			8

#define F_LOW_PCI_33	0x23
#define F_LOW_PCI_40	0x29
#define F_LOW_PCI_50	0x2d
#define F_LOW_PCI_66	0x42

/* FIXME: compare with driver's code before removing */
#if 0
		if (hpt_minimum_revision(dev, 3)) {
			u8 cbl;
			cbl = inb(iobase + 0x7b);
			outb(cbl | 1, iobase + 0x7b);
			outb(cbl & ~1, iobase + 0x7b);
			cbl = inb(iobase + 0x7a);
			p += sprintf(p, "Cable:          ATA-%d"
					"                          ATA-%d\n",
				(cbl & 0x02) ? 33 : 66,
				(cbl & 0x01) ? 33 : 66);
			p += sprintf(p, "\n");
		}
		{
			u8 c2, c3;
			/* older revs don't have these registers mapped 
			 * into io space */
			pci_read_config_byte(dev, 0x43, &c0);
			pci_read_config_byte(dev, 0x47, &c1);
			pci_read_config_byte(dev, 0x4b, &c2);
			pci_read_config_byte(dev, 0x4f, &c3);

			p += sprintf(p, "Mode:           %s             %s"
					"           %s              %s\n",
				(c0 & 0x10) ? "UDMA" : (c0 & 0x20) ? "DMA " : 
					(c0 & 0x80) ? "PIO " : "off ",
				(c1 & 0x10) ? "UDMA" : (c1 & 0x20) ? "DMA " :
					(c1 & 0x80) ? "PIO " : "off ",
				(c2 & 0x10) ? "UDMA" : (c2 & 0x20) ? "DMA " :
					(c2 & 0x80) ? "PIO " : "off ",
				(c3 & 0x10) ? "UDMA" : (c3 & 0x20) ? "DMA " :
					(c3 & 0x80) ? "PIO " : "off ");
		}
	}
#endif

static u32 hpt_revision (struct pci_dev *dev)
{
	u32 class_rev;
	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
	class_rev &= 0xff;

	switch(dev->device) {
		/* Remap new 372N onto 372 */
		case PCI_DEVICE_ID_TTI_HPT372N:
			class_rev = PCI_DEVICE_ID_TTI_HPT372; break;
		case PCI_DEVICE_ID_TTI_HPT374:
			class_rev = PCI_DEVICE_ID_TTI_HPT374; break;
		case PCI_DEVICE_ID_TTI_HPT371:
			class_rev = PCI_DEVICE_ID_TTI_HPT371; break;
		case PCI_DEVICE_ID_TTI_HPT302:
			class_rev = PCI_DEVICE_ID_TTI_HPT302; break;
		case PCI_DEVICE_ID_TTI_HPT372:
			class_rev = PCI_DEVICE_ID_TTI_HPT372; break;
		default:
			break;
	}
	return class_rev;
}

static u32 hpt_minimum_revision (struct pci_dev *dev, int revision)
{
	unsigned int class_rev = hpt_revision(dev);
	revision--;
	return ((int) (class_rev > revision) ? 1 : 0);
}

static int check_in_drive_lists(ide_drive_t *drive, const char **list);

static u8 hpt3xx_ratemask (ide_drive_t *drive)
{
	struct pci_dev *dev	= HWIF(drive)->pci_dev;
	u8 mode			= 0;

	if (hpt_minimum_revision(dev, 8)) {		/* HPT374 */
		mode = (HPT374_ALLOW_ATA133_6) ? 4 : 3;
	} else if (hpt_minimum_revision(dev, 7)) {	/* HPT371 */
		mode = (HPT371_ALLOW_ATA133_6) ? 4 : 3;
	} else if (hpt_minimum_revision(dev, 6)) {	/* HPT302 */
		mode = (HPT302_ALLOW_ATA133_6) ? 4 : 3;
	} else if (hpt_minimum_revision(dev, 5)) {	/* HPT372 */
		mode = (HPT372_ALLOW_ATA133_6) ? 4 : 3;
	} else if (hpt_minimum_revision(dev, 4)) {	/* HPT370A */
		mode = (HPT370_ALLOW_ATA100_5) ? 3 : 2;
	} else if (hpt_minimum_revision(dev, 3)) {	/* HPT370 */
		mode = (HPT370_ALLOW_ATA100_5) ? 3 : 2;
		mode = (check_in_drive_lists(drive, bad_ata33)) ? 0 : mode;
	} else {				/* HPT366 and HPT368 */
		mode = (check_in_drive_lists(drive, bad_ata33)) ? 0 : 2;
	}
	if (!eighty_ninty_three(drive) && (mode))
		mode = min(mode, (u8)1);
	return mode;
}

/*
 *	Note for the future; the SATA hpt37x we must set
 *	either PIO or UDMA modes 0,4,5
 */
 
static u8 hpt3xx_ratefilter (ide_drive_t *drive, u8 speed)
{
	struct pci_dev *dev	= HWIF(drive)->pci_dev;
	u8 mode			= hpt3xx_ratemask(drive);

	if (drive->media != ide_disk)
		return min(speed, (u8)XFER_PIO_4);

	switch(mode) {
		case 0x04:
			speed = min(speed, (u8)XFER_UDMA_6);
			break;
		case 0x03:
			speed = min(speed, (u8)XFER_UDMA_5);
			if (hpt_minimum_revision(dev, 5))
				break;
			if (check_in_drive_lists(drive, bad_ata100_5))
				speed = min(speed, (u8)XFER_UDMA_4);
			break;
		case 0x02:
			speed = min(speed, (u8)XFER_UDMA_4);
	/*
	 * CHECK ME, Does this need to be set to 5 ??
	 */
			if (hpt_minimum_revision(dev, 3))
				break;
			if ((check_in_drive_lists(drive, bad_ata66_4)) ||
			    (!(HPT366_ALLOW_ATA66_4)))
				speed = min(speed, (u8)XFER_UDMA_3);
			if ((check_in_drive_lists(drive, bad_ata66_3)) ||
			    (!(HPT366_ALLOW_ATA66_3)))
				speed = min(speed, (u8)XFER_UDMA_2);
			break;
		case 0x01:
			speed = min(speed, (u8)XFER_UDMA_2);
	/*
	 * CHECK ME, Does this need to be set to 5 ??
	 */
			if (hpt_minimum_revision(dev, 3))
				break;
			if (check_in_drive_lists(drive, bad_ata33))
				speed = min(speed, (u8)XFER_MW_DMA_2);
			break;
		case 0x00:
		default:
			speed = min(speed, (u8)XFER_MW_DMA_2);
			break;
	}
	return speed;
}

static int check_in_drive_lists (ide_drive_t *drive, const char **list)
{
	struct hd_driveid *id = drive->id;

	if (quirk_drives == list) {
		while (*list)
			if (strstr(id->model, *list++))
				return 1;
	} else {
		while (*list)
			if (!strcmp(*list++,id->model))
				return 1;
	}
	return 0;
}

static unsigned int pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
{
	for ( ; chipset_table->xfer_speed ; chipset_table++)
		if (chipset_table->xfer_speed == speed)
			return chipset_table->chipset_settings;
	return chipset_table->chipset_settings;
}

static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed)
{
	struct pci_dev *dev	= HWIF(drive)->pci_dev;
	u8 speed		= hpt3xx_ratefilter(drive, xferspeed);
//	u8 speed		= ide_rate_filter(hpt3xx_ratemask(drive), xferspeed);
	u8 regtime		= (drive->select.b.unit & 0x01) ? 0x44 : 0x40;
	u8 regfast		= (HWIF(drive)->channel) ? 0x55 : 0x51;
	u8 drive_fast		= 0;
	u32 reg1 = 0, reg2	= 0;

	/*
	 * Disable the "fast interrupt" prediction.
	 */
	pci_read_config_byte(dev, regfast, &drive_fast);
#if 0
	if (drive_fast & 0x02)
		pci_write_config_byte(dev, regfast, drive_fast & ~0x20);
#else
	if (drive_fast & 0x80)
		pci_write_config_byte(dev, regfast, drive_fast & ~0x80);
#endif

	reg2 = pci_bus_clock_list(speed,
		(struct chipset_bus_clock_list_entry *) pci_get_drvdata(dev));
	/*
	 * Disable on-chip PIO FIFO/buffer
	 *  (to avoid problems handling I/O errors later)
	 */
	pci_read_config_dword(dev, regtime, &reg1);
	if (speed >= XFER_MW_DMA_0) {
		reg2 = (reg2 & ~0xc0000000) | (reg1 & 0xc0000000);
	} else {
		reg2 = (reg2 & ~0x30070000) | (reg1 & 0x30070000);
	}	
	reg2 &= ~0x80000000;

	pci_write_config_dword(dev, regtime, reg2);

	return ide_config_drive_speed(drive, speed);
}

static int hpt370_tune_chipset(ide_drive_t *drive, u8 xferspeed)
{
	struct pci_dev *dev = HWIF(drive)->pci_dev;
	u8 speed	= hpt3xx_ratefilter(drive, xferspeed);
//	u8 speed	= ide_rate_filter(hpt3xx_ratemask(drive), xferspeed);
	u8 regfast	= (HWIF(drive)->channel) ? 0x55 : 0x51;
	u8 drive_pci	= 0x40 + (drive->dn * 4);
	u8 new_fast	= 0, drive_fast = 0;
	u32 list_conf	= 0, drive_conf = 0;
	u32 conf_mask	= (speed >= XFER_MW_DMA_0) ? 0xc0000000 : 0x30070000;

	/*
	 * Disable the "fast interrupt" prediction.
	 * don't holdoff on interrupts. (== 0x01 despite what the docs say) 
	 */
	pci_read_config_byte(dev, regfast, &drive_fast);
	new_fast = drive_fast;
	if (new_fast & 0x02)
		new_fast &= ~0x02;

#ifdef HPT_DELAY_INTERRUPT
	if (new_fast & 0x01)
		new_fast &= ~0x01;
#else
	if ((new_fast & 0x01) == 0)
		new_fast |= 0x01;
#endif
	if (new_fast != drive_fast)
		pci_write_config_byte(dev, regfast, new_fast);

	list_conf = pci_bus_clock_list(speed, 
				       (struct chipset_bus_clock_list_entry *)
				       pci_get_drvdata(dev));

	pci_read_config_dword(dev, drive_pci, &drive_conf);
	list_conf = (list_conf & ~conf_mask) | (drive_conf & conf_mask);
	
	if (speed < XFER_MW_DMA_0) {
		list_conf &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
	}

	pci_write_config_dword(dev, drive_pci, list_conf);

	return ide_config_drive_speed(drive, speed);
}

static int hpt372_tune_chipset(ide_drive_t *drive, u8 xferspeed)
{
	struct pci_dev *dev	= HWIF(drive)->pci_dev;
	u8 speed	= hpt3xx_ratefilter(drive, xferspeed);
//	u8 speed	= ide_rate_filter(hpt3xx_ratemask(drive), xferspeed);
	u8 regfast	= (HWIF(drive)->channel) ? 0x55 : 0x51;
	u8 drive_fast	= 0, drive_pci = 0x40 + (drive->dn * 4);
	u32 list_conf	= 0, drive_conf = 0;
	u32 conf_mask	= (speed >= XFER_MW_DMA_0) ? 0xc0000000 : 0x30070000;

	/*
	 * Disable the "fast interrupt" prediction.
	 * don't holdoff on interrupts. (== 0x01 despite what the docs say)
	 */
	pci_read_config_byte(dev, regfast, &drive_fast);
	drive_fast &= ~0x07;
	pci_write_config_byte(dev, regfast, drive_fast);
					
	list_conf = pci_bus_clock_list(speed,
			(struct chipset_bus_clock_list_entry *)
					pci_get_drvdata(dev));
	pci_read_config_dword(dev, drive_pci, &drive_conf);
	list_conf = (list_conf & ~conf_mask) | (drive_conf & conf_mask);
	if (speed < XFER_MW_DMA_0)
		list_conf &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
	pci_write_config_dword(dev, drive_pci, list_conf);

	return ide_config_drive_speed(drive, speed);
}

static int hpt3xx_tune_chipset (ide_drive_t *drive, u8 speed)
{
	struct pci_dev *dev	= HWIF(drive)->pci_dev;

	if (hpt_minimum_revision(dev, 8))
		return hpt372_tune_chipset(drive, speed); /* not a typo */
#if 0
	else if (hpt_minimum_revision(dev, 7))
		hpt371_tune_chipset(drive, speed);
	else if (hpt_minimum_revision(dev, 6))
		hpt302_tune_chipset(drive, speed);
#endif
	else if (hpt_minimum_revision(dev, 5))
		return hpt372_tune_chipset(drive, speed);
	else if (hpt_minimum_revision(dev, 3))
		return hpt370_tune_chipset(drive, speed);
	else	/* hpt368: hpt_minimum_revision(dev, 2) */
		return hpt36x_tune_chipset(drive, speed);
}

static void hpt3xx_tune_drive (ide_drive_t *drive, u8 pio)
{
	pio = ide_get_best_pio_mode(drive, 255, pio, NULL);
	(void) hpt3xx_tune_chipset(drive, (XFER_PIO_0 + pio));
}

/*
 * This allows the configuration of ide_pci chipset registers
 * for cards that learn about the drive's UDMA, DMA, PIO capabilities
 * after the drive is reported by the OS.  Initially for designed for
 * HPT366 UDMA chipset by HighPoint|Triones Technologies, Inc.
 *
 * check_in_drive_lists(drive, bad_ata66_4)
 * check_in_drive_lists(drive, bad_ata66_3)
 * check_in_drive_lists(drive, bad_ata33)
 *
 */
static int config_chipset_for_dma (ide_drive_t *drive)
{
	u8 speed = ide_dma_speed(drive, hpt3xx_ratemask(drive));

	if (!(speed))
		return 0;

	(void) hpt3xx_tune_chipset(drive, speed);
	return ide_dma_enable(drive);
}

static int hpt3xx_quirkproc (ide_drive_t *drive)
{
	return ((int) check_in_drive_lists(drive, quirk_drives));
}

static void hpt3xx_intrproc (ide_drive_t *drive)
{
	ide_hwif_t *hwif = HWIF(drive);

	if (drive->quirk_list)
		return;
	/* drives in the quirk_list may not like intr setups/cleanups */
	hwif->OUTB(drive->ctl|2, IDE_CONTROL_REG);
}

static void hpt3xx_maskproc (ide_drive_t *drive, int mask)
{
	struct pci_dev *dev = HWIF(drive)->pci_dev;

	if (drive->quirk_list) {
		if (hpt_minimum_revision(dev,3)) {
			u8 reg5a = 0;
			pci_read_config_byte(dev, 0x5a, &reg5a);
			if (((reg5a & 0x10) >> 4) != mask)
				pci_write_config_byte(dev, 0x5a, mask ? (reg5a | 0x10) : (reg5a & ~0x10));
		} else {
			if (mask) {
				disable_irq(HWIF(drive)->irq);
			} else {
				enable_irq(HWIF(drive)->irq);
			}
		}
	} else {
		if (IDE_CONTROL_REG)
			HWIF(drive)->OUTB(mask ? (drive->ctl | 2) :
						 (drive->ctl & ~2),
						 IDE_CONTROL_REG);
	}
}

static int hpt366_config_drive_xfer_rate (ide_drive_t *drive)
{
	ide_hwif_t *hwif	= HWIF(drive);
	struct hd_driveid *id	= drive->id;

	drive->init_speed = 0;

	if (id && (id->capability & 1) && drive->autodma) {

		if (ide_use_dma(drive)) {
			if (config_chipset_for_dma(drive))
				return hwif->ide_dma_on(drive);
		}

		goto fast_ata_pio;

	} else if ((id->capability & 8) || (id->field_valid & 2)) {
fast_ata_pio:
		hpt3xx_tune_drive(drive, 5);
		return hwif->ide_dma_off_quietly(drive);
	}
	/* IORDY not supported */
	return 0;
}

/*
 * This is specific to the HPT366 UDMA bios chipset
 * by HighPoint|Triones Technologies, Inc.
 */
static int hpt366_ide_dma_lostirq (ide_drive_t *drive)
{
	struct pci_dev *dev	= HWIF(drive)->pci_dev;
	u8 reg50h = 0, reg52h = 0, reg5ah = 0;

	pci_read_config_byte(dev, 0x50, &reg50h);
	pci_read_config_byte(dev, 0x52, &reg52h);
	pci_read_config_byte(dev, 0x5a, &reg5ah);
	printk("%s: (%s)  reg50h=0x%02x, reg52h=0x%02x, reg5ah=0x%02x\n",
		drive->name, __FUNCTION__, reg50h, reg52h, reg5ah);
	if (reg5ah & 0x10)
		pci_write_config_byte(dev, 0x5a, reg5ah & ~0x10);
#if 0
	/* how about we flush and reset, mmmkay? */
	pci_write_config_byte(dev, 0x51, 0x1F);
	/* fall through to a reset */
	case dma_start:
	case ide_dma_end:
	/* reset the chips state over and over.. */
	pci_write_config_byte(dev, 0x51, 0x13);
#endif
	return __ide_dma_lostirq(drive);
}

static void hpt370_clear_engine (ide_drive_t *drive)
{
	u8 regstate = HWIF(drive)->channel ? 0x54 : 0x50;
	pci_write_config_byte(HWIF(drive)->pci_dev, regstate, 0x37);
	udelay(10);
}

static void hpt370_ide_dma_start(ide_drive_t *drive)
{
#ifdef HPT_RESET_STATE_ENGINE
	hpt370_clear_engine(drive);
#endif
	ide_dma_start(drive);
}

static int hpt370_ide_dma_end (ide_drive_t *drive)
{
	ide_hwif_t *hwif	= HWIF(drive);
	u8 dma_stat		= hwif->INB(hwif->dma_status);

	if (dma_stat & 0x01) {
		/* wait a little */
		udelay(20);
		dma_stat = hwif->INB(hwif->dma_status);
	}
	if ((dma_stat & 0x01) != 0) 
		/* fallthrough */
		(void) HWIF(drive)->ide_dma_timeout(drive);

	return __ide_dma_end(drive);
}

static void hpt370_lostirq_timeout (ide_drive_t *drive)
{
	ide_hwif_t *hwif	= HWIF(drive);
	u8 bfifo = 0, reginfo	= hwif->channel ? 0x56 : 0x52;
	u8 dma_stat = 0, dma_cmd = 0;

	pci_read_config_byte(HWIF(drive)->pci_dev, reginfo, &bfifo);
	printk("%s: %d bytes in FIFO\n", drive->name, bfifo);
	hpt370_clear_engine(drive);
	/* get dma command mode */
	dma_cmd = hwif->INB(hwif->dma_command);
	/* stop dma */
	hwif->OUTB(dma_cmd & ~0x1, hwif->dma_command);
	dma_stat = hwif->INB(hwif->dma_status);
	/* clear errors */
	hwif->OUTB(dma_stat | 0x6, hwif->dma_status);
}

static int hpt370_ide_dma_timeout (ide_drive_t *drive)
{
	hpt370_lostirq_timeout(drive);
	hpt370_clear_engine(drive);
	return __ide_dma_timeout(drive);
}

static int hpt370_ide_dma_lostirq (ide_drive_t *drive)
{
	hpt370_lostirq_timeout(drive);
	hpt370_clear_engine(drive);
	return __ide_dma_lostirq(drive);
}

/* returns 1 if DMA IRQ issued, 0 otherwise */
static int hpt374_ide_dma_test_irq(ide_drive_t *drive)
{
	ide_hwif_t *hwif	= HWIF(drive);
	u16 bfifo		= 0;
	u8 reginfo		= hwif->channel ? 0x56 : 0x52;
	u8 dma_stat;

	pci_read_config_word(hwif->pci_dev, reginfo, &bfifo);
	if (bfifo & 0x1FF) {
//		printk("%s: %d bytes in FIFO\n", drive->name, bfifo);
		return 0;
	}

	dma_stat = hwif->INB(hwif->dma_status);
	/* return 1 if INTR asserted */
	if ((dma_stat & 4) == 4)
		return 1;

	if (!drive->waiting_for_dma)
		printk(KERN_WARNING "%s: (%s) called while not waiting\n",
				drive->name, __FUNCTION__);
	return 0;
}

static int hpt374_ide_dma_end (ide_drive_t *drive)
{
	struct pci_dev *dev	= HWIF(drive)->pci_dev;
	ide_hwif_t *hwif	= HWIF(drive);
	u8 msc_stat = 0, mscreg	= hwif->channel ? 0x54 : 0x50;
	u8 bwsr_stat = 0, bwsr_mask = hwif->channel ? 0x02 : 0x01;

	pci_read_config_byte(dev, 0x6a, &bwsr_stat);
	pci_read_config_byte(dev, mscreg, &msc_stat);
	if ((bwsr_stat & bwsr_mask) == bwsr_mask)
		pci_write_config_byte(dev, mscreg, msc_stat|0x30);
	return __ide_dma_end(drive);
}

/**
 *	hpt372n_set_clock	-	perform clock switching dance
 *	@drive: Drive to switch
 *	@mode: Switching mode (0x21 for write, 0x23 otherwise)
 *
 *	Switch the DPLL clock on the HPT372N devices. This is a
 *	right mess.
 */
 
static void hpt372n_set_clock(ide_drive_t *drive, int mode)
{
	ide_hwif_t *hwif	= HWIF(drive);
	
	/* FIXME: should we check for DMA active and BUG() */
	/* Tristate the bus */
	outb(0x80, hwif->dma_base+0x73);
	outb(0x80, hwif->dma_base+0x77);
	
	/* Switch clock and reset channels */
	outb(mode, hwif->dma_base+0x7B);
	outb(0xC0, hwif->dma_base+0x79);
	
	/* Reset state machines */
	outb(0x37, hwif->dma_base+0x70);
	outb(0x37, hwif->dma_base+0x74);
	
	/* Complete reset */
	outb(0x00, hwif->dma_base+0x79);
	
	/* Reconnect channels to bus */
	outb(0x00, hwif->dma_base+0x73);
	outb(0x00, hwif->dma_base+0x77);
}

/**
 *	hpt372n_rw_disk		-	prepare for I/O
 *	@drive: drive for command
 *	@rq: block request structure
 *
 *	This is called when a disk I/O is issued to the 372N.
 *	We need it because of the clock switching.
 */

static void hpt372n_rw_disk(ide_drive_t *drive, struct request *rq)
{
	ide_hwif_t *hwif = drive->hwif;
	int wantclock;

	wantclock = rq_data_dir(rq) ? 0x23 : 0x21;

	if (hwif->config_data != wantclock) {
		hpt372n_set_clock(drive, wantclock);
		hwif->config_data = wantclock;
	}
}

/*
 * Since SUN Cobalt is attempting to do this operation, I should disclose
 * this has been a long time ago Thu Jul 27 16:40:57 2000 was the patch date
 * HOTSWAP ATA Infrastructure.
 */

static void hpt3xx_reset (ide_drive_t *drive)
{
#if 0
	unsigned long high_16	= pci_resource_start(HWIF(drive)->pci_dev, 4);
	u8 reset	= (HWIF(drive)->channel) ? 0x80 : 0x40;
	u8 reg59h	= 0;

	pci_read_config_byte(HWIF(drive)->pci_dev, 0x59, &reg59h);
	pci_write_config_byte(HWIF(drive)->pci_dev, 0x59, reg59h|reset);
	pci_write_config_byte(HWIF(drive)->pci_dev, 0x59, reg59h);
#endif
}

static int hpt3xx_tristate (ide_drive_t * drive, int state)
{
	ide_hwif_t *hwif	= HWIF(drive);
	struct pci_dev *dev	= hwif->pci_dev;
	u8 reg59h = 0, reset	= (hwif->channel) ? 0x80 : 0x40;
	u8 regXXh = 0, state_reg= (hwif->channel) ? 0x57 : 0x53;

//	hwif->bus_state = state;

	pci_read_config_byte(dev, 0x59, &reg59h);
	pci_read_config_byte(dev, state_reg, &regXXh);

	if (state) {
		(void) ide_do_reset(drive);
		pci_write_config_byte(dev, state_reg, regXXh|0x80);
		pci_write_config_byte(dev, 0x59, reg59h|reset);
	} else {
		pci_write_config_byte(dev, 0x59, reg59h & ~(reset));
		pci_write_config_byte(dev, state_reg, regXXh & ~(0x80));
		(void) ide_do_reset(drive);
	}
	return 0;
}

/* 
 * set/get power state for a drive.
 * turning the power off does the following things:
 *   1) soft-reset the drive
 *   2) tri-states the ide bus
 *
 * when we turn things back on, we need to re-initialize things.
 */
#define TRISTATE_BIT  0x8000
static int hpt370_busproc(ide_drive_t * drive, int state)
{
	ide_hwif_t *hwif	= HWIF(drive);
	struct pci_dev *dev	= hwif->pci_dev;
	u8 tristate = 0, resetmask = 0, bus_reg = 0;
	u16 tri_reg;

	hwif->bus_state = state;

	if (hwif->channel) { 
		/* secondary channel */
		tristate = 0x56;
		resetmask = 0x80; 
	} else { 
		/* primary channel */
		tristate = 0x52;
		resetmask = 0x40;
	}

	/* grab status */
	pci_read_config_word(dev, tristate, &tri_reg);
	pci_read_config_byte(dev, 0x59, &bus_reg);

	/* set the state. we don't set it if we don't need to do so.
	 * make sure that the drive knows that it has failed if it's off */
	switch (state) {
	case BUSSTATE_ON:
		hwif->drives[0].failures = 0;
		hwif->drives[1].failures = 0;
		if ((bus_reg & resetmask) == 0)
			return 0;
		tri_reg &= ~TRISTATE_BIT;
		bus_reg &= ~resetmask;
		break;
	case BUSSTATE_OFF:
		hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
		hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
		if ((tri_reg & TRISTATE_BIT) == 0 && (bus_reg & resetmask))
			return 0;
		tri_reg &= ~TRISTATE_BIT;
		bus_reg |= resetmask;
		break;
	case BUSSTATE_TRISTATE:
		hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
		hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
		if ((tri_reg & TRISTATE_BIT) && (bus_reg & resetmask))
			return 0;
		tri_reg |= TRISTATE_BIT;
		bus_reg |= resetmask;
		break;
	}
	pci_write_config_byte(dev, 0x59, bus_reg);
	pci_write_config_word(dev, tristate, tri_reg);

	return 0;
}

static int __devinit init_hpt37x(struct pci_dev *dev)
{
	int adjust, i;
	u16 freq;
	u32 pll;
	u8 reg5bh;
	u8 reg5ah = 0;
	unsigned long dmabase = pci_resource_start(dev, 4);
	u8 did, rid;	
	int is_372n = 0;
	
	pci_read_config_byte(dev, 0x5a, &reg5ah);
	/* interrupt force enable */
	pci_write_config_byte(dev, 0x5a, (reg5ah & ~0x10));

	if(dmabase)
	{
		did = inb(dmabase + 0x22);
		rid = inb(dmabase + 0x28);
	
		if((did == 4 && rid == 6) || (did == 5 && rid > 1))
			is_372n = 1;
	}

	/*
	 * default to pci clock. make sure MA15/16 are set to output
	 * to prevent drives having problems with 40-pin cables.
	 */
	pci_write_config_byte(dev, 0x5b, 0x23);

	/*
	 * set up the PLL. we need to adjust it so that it's stable. 
	 * freq = Tpll * 192 / Tpci
	 *
	 * Todo. For non x86 should probably check the dword is
	 * set to 0xABCDExxx indicating the BIOS saved f_CNT
	 */
	pci_read_config_word(dev, 0x78, &freq);
	freq &= 0x1FF;
	
	/*
	 * The 372N uses different PCI clock information and has
	 * some other complications
	 *	On PCI33 timing we must clock switch
	 *	On PCI66 timing we must NOT use the PCI clock
	 *
	 * Currently we always set up the PLL for the 372N
	 */
	 
	pci_set_drvdata(dev, NULL);
	
	if(is_372n)
	{
		printk(KERN_INFO "hpt: HPT372N detected, using 372N timing.\n");
		if(freq < 0x55)
			pll = F_LOW_PCI_33;
		else if(freq < 0x70)
			pll = F_LOW_PCI_40;
		else if(freq < 0x7F)
			pll = F_LOW_PCI_50;
		else
			pll = F_LOW_PCI_66;
			
		printk(KERN_INFO "FREQ: %d PLL: %d\n", freq, pll);
			
		/* We always use the pll not the PCI clock on 372N */
	}
	else
	{
		if(freq < 0x9C)
			pll = F_LOW_PCI_33;
		else if(freq < 0xb0)
			pll = F_LOW_PCI_40;
		else if(freq <0xc8)
			pll = F_LOW_PCI_50;
		else
			pll = F_LOW_PCI_66;
	
		if (pll == F_LOW_PCI_33) {
			if (hpt_minimum_revision(dev,8))
				pci_set_drvdata(dev, (void *) thirty_three_base_hpt374);
			else if (hpt_minimum_revision(dev,5))
				pci_set_drvdata(dev, (void *) thirty_three_base_hpt372);
			else if (hpt_minimum_revision(dev,4))
				pci_set_drvdata(dev, (void *) thirty_three_base_hpt370a);
			else
				pci_set_drvdata(dev, (void *) thirty_three_base_hpt370);
			printk("HPT37X: using 33MHz PCI clock\n");
		} else if (pll == F_LOW_PCI_40) {
			/* Unsupported */
		} else if (pll == F_LOW_PCI_50) {
			if (hpt_minimum_revision(dev,8))
				pci_set_drvdata(dev, (void *) fifty_base_hpt370a);
			else if (hpt_minimum_revision(dev,5))
				pci_set_drvdata(dev, (void *) fifty_base_hpt372);
			else if (hpt_minimum_revision(dev,4))
				pci_set_drvdata(dev, (void *) fifty_base_hpt370a);
			else
				pci_set_drvdata(dev, (void *) fifty_base_hpt370a);
			printk("HPT37X: using 50MHz PCI clock\n");
		} else {
			if (hpt_minimum_revision(dev,8))
			{
				printk(KERN_ERR "HPT37x: 66MHz timings are not supported.\n");
			}
			else if (hpt_minimum_revision(dev,5))
				pci_set_drvdata(dev, (void *) sixty_six_base_hpt372);
			else if (hpt_minimum_revision(dev,4))
				pci_set_drvdata(dev, (void *) sixty_six_base_hpt370a);
			else
				pci_set_drvdata(dev, (void *) sixty_six_base_hpt370);
			printk("HPT37X: using 66MHz PCI clock\n");
		}
	}
	
	/*
	 * only try the pll if we don't have a table for the clock
	 * speed that we're running at. NOTE: the internal PLL will
	 * result in slow reads when using a 33MHz PCI clock. we also
	 * don't like to use the PLL because it will cause glitches
	 * on PRST/SRST when the HPT state engine gets reset.
	 */
	if (pci_get_drvdata(dev)) 
		goto init_hpt37X_done;
	
	/*
	 * adjust PLL based upon PCI clock, enable it, and wait for
	 * stabilization.
	 */
	adjust = 0;
	freq = (pll < F_LOW_PCI_50) ? 2 : 4;
	while (adjust++ < 6) {
		pci_write_config_dword(dev, 0x5c, (freq + pll) << 16 |
				       pll | 0x100);

		/* wait for clock stabilization */
		for (i = 0; i < 0x50000; i++) {
			pci_read_config_byte(dev, 0x5b, &reg5bh);
			if (reg5bh & 0x80) {
				/* spin looking for the clock to destabilize */
				for (i = 0; i < 0x1000; ++i) {
					pci_read_config_byte(dev, 0x5b, 
							     &reg5bh);
					if ((reg5bh & 0x80) == 0)
						goto pll_recal;
				}
				pci_read_config_dword(dev, 0x5c, &pll);
				pci_write_config_dword(dev, 0x5c, 
						       pll & ~0x100);
				pci_write_config_byte(dev, 0x5b, 0x21);
				if (hpt_minimum_revision(dev,8))
					pci_set_drvdata(dev, (void *) fifty_base_hpt370a);
				else if (hpt_minimum_revision(dev,5))
					pci_set_drvdata(dev, (void *) fifty_base_hpt372);
				else if (hpt_minimum_revision(dev,4))
					pci_set_drvdata(dev, (void *) fifty_base_hpt370a);
				else
					pci_set_drvdata(dev, (void *) fifty_base_hpt370a);
				printk("HPT37X: using 50MHz internal PLL\n");
				goto init_hpt37X_done;
			}
		}
pll_recal:
		if (adjust & 1)
			pll -= (adjust >> 1);
		else
			pll += (adjust >> 1);
	} 

init_hpt37X_done:
	/* reset state engine */
	pci_write_config_byte(dev, 0x50, 0x37); 
	pci_write_config_byte(dev, 0x54, 0x37); 
	udelay(100);
	return 0;
}

static int __devinit init_hpt366(struct pci_dev *dev)
{
	u32 reg1	= 0;
	u8 drive_fast	= 0;

	/*
	 * Disable the "fast interrupt" prediction.
	 */
	pci_read_config_byte(dev, 0x51, &drive_fast);
	if (drive_fast & 0x80)
		pci_write_config_byte(dev, 0x51, drive_fast & ~0x80);
	pci_read_config_dword(dev, 0x40, &reg1);
									
	/* detect bus speed by looking at control reg timing: */
	switch((reg1 >> 8) & 7) {
		case 5:
			pci_set_drvdata(dev, (void *) forty_base_hpt366);
			break;
		case 9:
			pci_set_drvdata(dev, (void *) twenty_five_base_hpt366);
			break;
		case 7:
		default:
			pci_set_drvdata(dev, (void *) thirty_three_base_hpt366);
			break;
	}

	if (!pci_get_drvdata(dev))
	{
		printk(KERN_ERR "hpt366: unknown bus timing.\n");
		pci_set_drvdata(dev, NULL);
	}
	return 0;
}

static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const char *name)
{
	int ret = 0;
	u8 test = 0;

	if (dev->resource[PCI_ROM_RESOURCE].start)
		pci_write_config_byte(dev, PCI_ROM_ADDRESS,
			dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);

	pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &test);
	if (test != (L1_CACHE_BYTES / 4))
		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
			(L1_CACHE_BYTES / 4));

	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &test);
	if (test != 0x78)
		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);

	pci_read_config_byte(dev, PCI_MIN_GNT, &test);
	if (test != 0x08)
		pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);

	pci_read_config_byte(dev, PCI_MAX_LAT, &test);
	if (test != 0x08)
		pci_write_config_byte(dev, PCI_MAX_LAT, 0x08);

	if (hpt_minimum_revision(dev, 3)) {
		ret = init_hpt37x(dev);
	} else {
		ret =init_hpt366(dev);
	}
	if (ret)
		return ret;

	return dev->irq;
}

static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
{
	struct pci_dev *dev		= hwif->pci_dev;
	u8 ata66 = 0, regmask		= (hwif->channel) ? 0x01 : 0x02;
	u8 did, rid;
	unsigned long dmabase		= hwif->dma_base;
	int is_372n = 0;
	
	if(dmabase)
	{
		did = inb(dmabase + 0x22);
		rid = inb(dmabase + 0x28);
	
		if((did == 4 && rid == 6) || (did == 5 && rid > 1))
			is_372n = 1;
	}
		
	hwif->tuneproc			= &hpt3xx_tune_drive;
	hwif->speedproc			= &hpt3xx_tune_chipset;
	hwif->quirkproc			= &hpt3xx_quirkproc;
	hwif->intrproc			= &hpt3xx_intrproc;
	hwif->maskproc			= &hpt3xx_maskproc;
	
	if(is_372n)
		hwif->rw_disk = &hpt372n_rw_disk;

	/*
	 * The HPT37x uses the CBLID pins as outputs for MA15/MA16
	 * address lines to access an external eeprom.  To read valid
	 * cable detect state the pins must be enabled as inputs.
	 */
	if (hpt_minimum_revision(dev, 8) && PCI_FUNC(dev->devfn) & 1) {
		/*
		 * HPT374 PCI function 1
		 * - set bit 15 of reg 0x52 to enable TCBLID as input
		 * - set bit 15 of reg 0x56 to enable FCBLID as input
		 */
		u16 mcr3, mcr6;
		pci_read_config_word(dev, 0x52, &mcr3);
		pci_read_config_word(dev, 0x56, &mcr6);
		pci_write_config_word(dev, 0x52, mcr3 | 0x8000);
		pci_write_config_word(dev, 0x56, mcr6 | 0x8000);
		/* now read cable id register */
		pci_read_config_byte(dev, 0x5a, &ata66);
		pci_write_config_word(dev, 0x52, mcr3);
		pci_write_config_word(dev, 0x56, mcr6);
	} else if (hpt_minimum_revision(dev, 3)) {
		/*
		 * HPT370/372 and 374 pcifn 0
		 * - clear bit 0 of 0x5b to enable P/SCBLID as inputs
		 */
		u8 scr2;
		pci_read_config_byte(dev, 0x5b, &scr2);
		pci_write_config_byte(dev, 0x5b, scr2 & ~1);
		/* now read cable id register */
		pci_read_config_byte(dev, 0x5a, &ata66);
		pci_write_config_byte(dev, 0x5b, scr2);
	} else {
		pci_read_config_byte(dev, 0x5a, &ata66);
	}

#ifdef DEBUG
	printk("HPT366: reg5ah=0x%02x ATA-%s Cable Port%d\n",
		ata66, (ata66 & regmask) ? "33" : "66",
		PCI_FUNC(hwif->pci_dev->devfn));
#endif /* DEBUG */

#ifdef HPT_SERIALIZE_IO
	/* serialize access to this device */
	if (hwif->mate)
		hwif->serialized = hwif->mate->serialized = 1;
#endif

	if (hpt_minimum_revision(dev,3)) {
		u8 reg5ah = 0;
			pci_write_config_byte(dev, 0x5a, reg5ah & ~0x10);
		/*
		 * set up ioctl for power status.
		 * note: power affects both
		 * drives on each channel
		 */
		hwif->resetproc	= &hpt3xx_reset;
		hwif->busproc	= &hpt370_busproc;
//		hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
	} else if (hpt_minimum_revision(dev,2)) {
		hwif->resetproc	= &hpt3xx_reset;
		hwif->busproc	= &hpt3xx_tristate;
	} else {
		hwif->resetproc = &hpt3xx_reset;
		hwif->busproc   = &hpt3xx_tristate;
	}

	if (!hwif->dma_base) {
		hwif->drives[0].autotune = 1;
		hwif->drives[1].autotune = 1;
		return;
	}

	hwif->ultra_mask = 0x7f;
	hwif->mwdma_mask = 0x07;

	if (!(hwif->udma_four))
		hwif->udma_four = ((ata66 & regmask) ? 0 : 1);
	hwif->ide_dma_check = &hpt366_config_drive_xfer_rate;

	if (hpt_minimum_revision(dev,8)) {
		hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq;
		hwif->ide_dma_end = &hpt374_ide_dma_end;
	} else if (hpt_minimum_revision(dev,5)) {
		hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq;
		hwif->ide_dma_end = &hpt374_ide_dma_end;
	} else if (hpt_minimum_revision(dev,3)) {
		hwif->dma_start = &hpt370_ide_dma_start;
		hwif->ide_dma_end = &hpt370_ide_dma_end;
		hwif->ide_dma_timeout = &hpt370_ide_dma_timeout;
		hwif->ide_dma_lostirq = &hpt370_ide_dma_lostirq;
	} else if (hpt_minimum_revision(dev,2))
		hwif->ide_dma_lostirq = &hpt366_ide_dma_lostirq;
	else
		hwif->ide_dma_lostirq = &hpt366_ide_dma_lostirq;

	if (!noautodma)
		hwif->autodma = 1;
	hwif->drives[0].autodma = hwif->autodma;
	hwif->drives[1].autodma = hwif->autodma;
}

static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase)
{
	u8 masterdma	= 0, slavedma = 0;
	u8 dma_new	= 0, dma_old = 0;
	u8 primary	= hwif->channel ? 0x4b : 0x43;
	u8 secondary	= hwif->channel ? 0x4f : 0x47;
	unsigned long flags;

	if (!dmabase)
		return;
		
	if(pci_get_drvdata(hwif->pci_dev) == NULL)
	{
		printk(KERN_WARNING "hpt: no known IDE timings, disabling DMA.\n");
		return;
	}

	dma_old = hwif->INB(dmabase+2);

	local_irq_save(flags);

	dma_new = dma_old;
	pci_read_config_byte(hwif->pci_dev, primary, &masterdma);
	pci_read_config_byte(hwif->pci_dev, secondary, &slavedma);

	if (masterdma & 0x30)	dma_new |= 0x20;
	if (slavedma & 0x30)	dma_new |= 0x40;
	if (dma_new != dma_old)
		hwif->OUTB(dma_new, dmabase+2);

	local_irq_restore(flags);

	ide_setup_dma(hwif, dmabase, 8);
}

static int __devinit init_setup_hpt374(struct pci_dev *dev, ide_pci_device_t *d)
{
	struct pci_dev *findev = NULL;

	if (PCI_FUNC(dev->devfn) & 1)
		return -ENODEV;

	while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
		if ((findev->vendor == dev->vendor) &&
		    (findev->device == dev->device) &&
		    ((findev->devfn - dev->devfn) == 1) &&
		    (PCI_FUNC(findev->devfn) & 1)) {
			if (findev->irq != dev->irq) {
				/* FIXME: we need a core pci_set_interrupt() */
				findev->irq = dev->irq;
				printk(KERN_WARNING "%s: pci-config space interrupt "
					"fixed.\n", d->name);
			}
			return ide_setup_pci_devices(dev, findev, d);
		}
	}
	return ide_setup_pci_device(dev, d);
}

static int __devinit init_setup_hpt37x(struct pci_dev *dev, ide_pci_device_t *d)
{
	return ide_setup_pci_device(dev, d);
}

static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
{
	struct pci_dev *findev = NULL;
	u8 pin1 = 0, pin2 = 0;
	unsigned int class_rev;
	char *chipset_names[] = {"HPT366", "HPT366",  "HPT368",
				 "HPT370", "HPT370A", "HPT372",
				 "HPT372N" };

	if (PCI_FUNC(dev->devfn) & 1)
		return -ENODEV;

	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
	class_rev &= 0xff;

	if(dev->device == PCI_DEVICE_ID_TTI_HPT372N)
		class_rev = 6;
		
	if(class_rev <= 6)
		d->name = chipset_names[class_rev];

	switch(class_rev) {
		case 6:
		case 5:
		case 4:
		case 3:
			goto init_single;
		default:
			break;
	}

	d->channels = 1;

	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin1);
	while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
		if ((findev->vendor == dev->vendor) &&
		    (findev->device == dev->device) &&
		    ((findev->devfn - dev->devfn) == 1) &&
		    (PCI_FUNC(findev->devfn) & 1)) {
			pci_read_config_byte(findev, PCI_INTERRUPT_PIN, &pin2);
			if ((pin1 != pin2) && (dev->irq == findev->irq)) {
				d->bootable = ON_BOARD;
				printk("%s: onboard version of chipset, "
					"pin1=%d pin2=%d\n", d->name,
					pin1, pin2);
			}
			return ide_setup_pci_devices(dev, findev, d);
		}
	}
init_single:
	return ide_setup_pci_device(dev, d);
}

static ide_pci_device_t hpt366_chipsets[] __devinitdata = {
	{	/* 0 */
		.name		= "HPT366",
		.init_setup	= init_setup_hpt366,
		.init_chipset	= init_chipset_hpt366,
		.init_hwif	= init_hwif_hpt366,
		.init_dma	= init_dma_hpt366,
		.channels	= 2,
		.autodma	= AUTODMA,
		.bootable	= OFF_BOARD,
		.extra		= 240
	},{	/* 1 */
		.name		= "HPT372A",
		.init_setup	= init_setup_hpt37x,
		.init_chipset	= init_chipset_hpt366,
		.init_hwif	= init_hwif_hpt366,
		.init_dma	= init_dma_hpt366,
		.channels	= 2,
		.autodma	= AUTODMA,
		.bootable	= OFF_BOARD,
	},{	/* 2 */
		.name		= "HPT302",
		.init_setup	= init_setup_hpt37x,
		.init_chipset	= init_chipset_hpt366,
		.init_hwif	= init_hwif_hpt366,
		.init_dma	= init_dma_hpt366,
		.channels	= 2,
		.autodma	= AUTODMA,
		.bootable	= OFF_BOARD,
	},{	/* 3 */
		.name		= "HPT371",
		.init_setup	= init_setup_hpt37x,
		.init_chipset	= init_chipset_hpt366,
		.init_hwif	= init_hwif_hpt366,
		.init_dma	= init_dma_hpt366,
		.channels	= 2,
		.autodma	= AUTODMA,
		.bootable	= OFF_BOARD,
	},{	/* 4 */
		.name		= "HPT374",
		.init_setup	= init_setup_hpt374,
		.init_chipset	= init_chipset_hpt366,
		.init_hwif	= init_hwif_hpt366,
		.init_dma	= init_dma_hpt366,
		.channels	= 2,	/* 4 */
		.autodma	= AUTODMA,
		.bootable	= OFF_BOARD,
	},{	/* 5 */
		.name		= "HPT372N",
		.init_setup	= init_setup_hpt37x,
		.init_chipset	= init_chipset_hpt366,
		.init_hwif	= init_hwif_hpt366,
		.init_dma	= init_dma_hpt366,
		.channels	= 2,	/* 4 */
		.autodma	= AUTODMA,
		.bootable	= OFF_BOARD,
	}
};

/**
 *	hpt366_init_one	-	called when an HPT366 is found
 *	@dev: the hpt366 device
 *	@id: the matching pci id
 *
 *	Called when the PCI registration layer (or the IDE initialization)
 *	finds a device matching our IDE device tables.
 */
 
static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
	ide_pci_device_t *d = &hpt366_chipsets[id->driver_data];

	return d->init_setup(dev, d);
}

static struct pci_device_id hpt366_pci_tbl[] = {
	{ PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT366, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
	{ PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT372, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
	{ PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT302, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
	{ PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT371, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
	{ PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT374, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
	{ PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT372N, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5},
	{ 0, },
};
MODULE_DEVICE_TABLE(pci, hpt366_pci_tbl);

static struct pci_driver driver = {
	.name		= "HPT366_IDE",
	.id_table	= hpt366_pci_tbl,
	.probe		= hpt366_init_one,
};

static int hpt366_ide_init(void)
{
	return ide_pci_register_driver(&driver);
}

module_init(hpt366_ide_init);

MODULE_AUTHOR("Andre Hedrick");
MODULE_DESCRIPTION("PCI driver module for Highpoint HPT366 IDE");
MODULE_LICENSE("GPL");