cfg80211.h 113 KB
Newer Older
1 2
#ifndef __NET_CFG80211_H
#define __NET_CFG80211_H
Johannes Berg's avatar
Johannes Berg committed
3 4 5
/*
 * 802.11 device and configuration interface
 *
6
 * Copyright 2006-2010	Johannes Berg <johannes@sipsolutions.net>
Johannes Berg's avatar
Johannes Berg committed
7 8 9 10 11
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
12

Johannes Berg's avatar
Johannes Berg committed
13 14 15
#include <linux/netdevice.h>
#include <linux/debugfs.h>
#include <linux/list.h>
16 17
#include <linux/netlink.h>
#include <linux/skbuff.h>
18
#include <linux/nl80211.h>
19 20
#include <linux/if_ether.h>
#include <linux/ieee80211.h>
Johannes Berg's avatar
Johannes Berg committed
21 22
#include <net/regulatory.h>

23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
/**
 * DOC: Introduction
 *
 * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges
 * userspace and drivers, and offers some utility functionality associated
 * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used
 * by all modern wireless drivers in Linux, so that they offer a consistent
 * API through nl80211. For backward compatibility, cfg80211 also offers
 * wireless extensions to userspace, but hides them from drivers completely.
 *
 * Additionally, cfg80211 contains code to help enforce regulatory spectrum
 * use restrictions.
 */


/**
 * DOC: Device registration
 *
 * In order for a driver to use cfg80211, it must register the hardware device
 * with cfg80211. This happens through a number of hardware capability structs
 * described below.
 *
 * The fundamental structure for each device is the 'wiphy', of which each
 * instance describes a physical wireless device connected to the system. Each
 * such wiphy can have zero, one, or many virtual interfaces associated with
 * it, which need to be identified as such by pointing the network interface's
 * @ieee80211_ptr pointer to a &struct wireless_dev which further describes
 * the wireless part of the interface, normally this struct is embedded in the
 * network interface's private data area. Drivers can optionally allow creating
 * or destroying virtual interfaces on the fly, but without at least one or the
 * ability to create some the wireless device isn't useful.
 *
 * Each wiphy structure contains device capability information, and also has
 * a pointer to the various operations the driver offers. The definitions and
 * structures here describe these capabilities in detail.
 */

60
/*
Johannes Berg's avatar
Johannes Berg committed
61 62 63 64 65 66 67 68
 * wireless hardware capability structures
 */

/**
 * enum ieee80211_band - supported frequency bands
 *
 * The bands are assigned this way because the supported
 * bitrates differ in these bands.
69
 *
Johannes Berg's avatar
Johannes Berg committed
70 71
 * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
 * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
Johannes Berg's avatar
Johannes Berg committed
72
 * @IEEE80211_NUM_BANDS: number of defined bands
73
 */
Johannes Berg's avatar
Johannes Berg committed
74
enum ieee80211_band {
75 76
	IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
	IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
Johannes Berg's avatar
Johannes Berg committed
77 78 79 80

	/* keep last */
	IEEE80211_NUM_BANDS
};
81

82
/**
Johannes Berg's avatar
Johannes Berg committed
83 84 85 86 87 88 89 90 91
 * enum ieee80211_channel_flags - channel flags
 *
 * Channel flags set by the regulatory control code.
 *
 * @IEEE80211_CHAN_DISABLED: This channel is disabled.
 * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
 *	on this channel.
 * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
 * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
92
 * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
Johannes Berg's avatar
Johannes Berg committed
93
 * 	is not permitted.
94
 * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
Johannes Berg's avatar
Johannes Berg committed
95
 * 	is not permitted.
96
 */
Johannes Berg's avatar
Johannes Berg committed
97 98 99 100 101
enum ieee80211_channel_flags {
	IEEE80211_CHAN_DISABLED		= 1<<0,
	IEEE80211_CHAN_PASSIVE_SCAN	= 1<<1,
	IEEE80211_CHAN_NO_IBSS		= 1<<2,
	IEEE80211_CHAN_RADAR		= 1<<3,
102 103
	IEEE80211_CHAN_NO_HT40PLUS	= 1<<4,
	IEEE80211_CHAN_NO_HT40MINUS	= 1<<5,
104 105
};

106
#define IEEE80211_CHAN_NO_HT40 \
107
	(IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
108

Johannes Berg's avatar
Johannes Berg committed
109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124
/**
 * struct ieee80211_channel - channel definition
 *
 * This structure describes a single channel for use
 * with cfg80211.
 *
 * @center_freq: center frequency in MHz
 * @hw_value: hardware-specific value for the channel
 * @flags: channel flags from &enum ieee80211_channel_flags.
 * @orig_flags: channel flags at registration time, used by regulatory
 *	code to support devices with additional restrictions
 * @band: band this channel belongs to.
 * @max_antenna_gain: maximum antenna gain in dBi
 * @max_power: maximum transmission power (in dBm)
 * @beacon_found: helper to regulatory code to indicate when a beacon
 *	has been found on this channel. Use regulatory_hint_found_beacon()
125
 *	to enable this, this is useful only on 5 GHz band.
Johannes Berg's avatar
Johannes Berg committed
126 127
 * @orig_mag: internal use
 * @orig_mpwr: internal use
Andy Green's avatar
Andy Green committed
128
 */
Johannes Berg's avatar
Johannes Berg committed
129 130 131 132 133 134 135 136 137 138 139 140
struct ieee80211_channel {
	enum ieee80211_band band;
	u16 center_freq;
	u16 hw_value;
	u32 flags;
	int max_antenna_gain;
	int max_power;
	bool beacon_found;
	u32 orig_flags;
	int orig_mag, orig_mpwr;
};

Andy Green's avatar
Andy Green committed
141
/**
Johannes Berg's avatar
Johannes Berg committed
142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160
 * enum ieee80211_rate_flags - rate flags
 *
 * Hardware/specification flags for rates. These are structured
 * in a way that allows using the same bitrate structure for
 * different bands/PHY modes.
 *
 * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
 *	preamble on this bitrate; only relevant in 2.4GHz band and
 *	with CCK rates.
 * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
 *	when used with 802.11a (on the 5 GHz band); filled by the
 *	core code when registering the wiphy.
 * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
 *	when used with 802.11b (on the 2.4 GHz band); filled by the
 *	core code when registering the wiphy.
 * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
 *	when used with 802.11g (on the 2.4 GHz band); filled by the
 *	core code when registering the wiphy.
 * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
Andy Green's avatar
Andy Green committed
161
 */
Johannes Berg's avatar
Johannes Berg committed
162 163 164 165 166 167 168
enum ieee80211_rate_flags {
	IEEE80211_RATE_SHORT_PREAMBLE	= 1<<0,
	IEEE80211_RATE_MANDATORY_A	= 1<<1,
	IEEE80211_RATE_MANDATORY_B	= 1<<2,
	IEEE80211_RATE_MANDATORY_G	= 1<<3,
	IEEE80211_RATE_ERP_G		= 1<<4,
};
Andy Green's avatar
Andy Green committed
169

Johannes Berg's avatar
Johannes Berg committed
170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188
/**
 * struct ieee80211_rate - bitrate definition
 *
 * This structure describes a bitrate that an 802.11 PHY can
 * operate with. The two values @hw_value and @hw_value_short
 * are only for driver use when pointers to this structure are
 * passed around.
 *
 * @flags: rate-specific flags
 * @bitrate: bitrate in units of 100 Kbps
 * @hw_value: driver/hardware value for this rate
 * @hw_value_short: driver/hardware value for this rate when
 *	short preamble is used
 */
struct ieee80211_rate {
	u32 flags;
	u16 bitrate;
	u16 hw_value, hw_value_short;
};
Andy Green's avatar
Andy Green committed
189

Johannes Berg's avatar
Johannes Berg committed
190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207
/**
 * struct ieee80211_sta_ht_cap - STA's HT capabilities
 *
 * This structure describes most essential parameters needed
 * to describe 802.11n HT capabilities for an STA.
 *
 * @ht_supported: is HT supported by the STA
 * @cap: HT capabilities map as described in 802.11n spec
 * @ampdu_factor: Maximum A-MPDU length factor
 * @ampdu_density: Minimum A-MPDU spacing
 * @mcs: Supported MCS rates
 */
struct ieee80211_sta_ht_cap {
	u16 cap; /* use IEEE80211_HT_CAP_ */
	bool ht_supported;
	u8 ampdu_factor;
	u8 ampdu_density;
	struct ieee80211_mcs_info mcs;
Andy Green's avatar
Andy Green committed
208 209
};

Johannes Berg's avatar
Johannes Berg committed
210 211 212 213 214 215 216 217 218 219 220 221 222 223
/**
 * struct ieee80211_supported_band - frequency band definition
 *
 * This structure describes a frequency band a wiphy
 * is able to operate in.
 *
 * @channels: Array of channels the hardware can operate in
 *	in this band.
 * @band: the band this structure represents
 * @n_channels: Number of channels in @channels
 * @bitrates: Array of bitrates the hardware can operate with
 *	in this band. Must be sorted to give a valid "supported
 *	rates" IE, i.e. CCK rates first, then OFDM.
 * @n_bitrates: Number of bitrates in @bitrates
Johannes Berg's avatar
Johannes Berg committed
224
 * @ht_cap: HT capabilities in this band
Johannes Berg's avatar
Johannes Berg committed
225 226 227 228 229 230 231 232 233
 */
struct ieee80211_supported_band {
	struct ieee80211_channel *channels;
	struct ieee80211_rate *bitrates;
	enum ieee80211_band band;
	int n_channels;
	int n_bitrates;
	struct ieee80211_sta_ht_cap ht_cap;
};
Andy Green's avatar
Andy Green committed
234

Johannes Berg's avatar
Johannes Berg committed
235 236 237
/*
 * Wireless hardware/device configuration structures and methods
 */
Andy Green's avatar
Andy Green committed
238

239 240 241 242 243 244 245 246 247 248 249 250 251 252 253
/**
 * DOC: Actions and configuration
 *
 * Each wireless device and each virtual interface offer a set of configuration
 * operations and other actions that are invoked by userspace. Each of these
 * actions is described in the operations structure, and the parameters these
 * operations use are described separately.
 *
 * Additionally, some operations are asynchronous and expect to get status
 * information via some functions that drivers need to call.
 *
 * Scanning and BSS list handling with its associated functionality is described
 * in a separate chapter.
 */

Johannes Berg's avatar
Johannes Berg committed
254 255
/**
 * struct vif_params - describes virtual interface parameters
256
 * @use_4addr: use 4-address frames
Johannes Berg's avatar
Johannes Berg committed
257 258
 */
struct vif_params {
259
       int use_4addr;
Johannes Berg's avatar
Johannes Berg committed
260
};
Andy Green's avatar
Andy Green committed
261

Johannes Berg's avatar
Johannes Berg committed
262
/**
263 264 265 266 267 268 269 270 271 272
 * struct key_params - key information
 *
 * Information about a key
 *
 * @key: key material
 * @key_len: length of key material
 * @cipher: cipher suite selector
 * @seq: sequence counter (IV/PN) for TKIP and CCMP keys, only used
 *	with the get_key() callback, must be in little endian,
 *	length given by @seq_len.
Johannes Berg's avatar
Johannes Berg committed
273
 * @seq_len: length of @seq.
274 275 276 277 278 279 280 281 282
 */
struct key_params {
	u8 *key;
	u8 *seq;
	int key_len;
	int seq_len;
	u32 cipher;
};

283 284 285
/**
 * enum survey_info_flags - survey information flags
 *
Johannes Berg's avatar
Johannes Berg committed
286
 * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in
287
 * @SURVEY_INFO_IN_USE: channel is currently being used
288 289 290 291 292
 * @SURVEY_INFO_CHANNEL_TIME: channel active time (in ms) was filled in
 * @SURVEY_INFO_CHANNEL_TIME_BUSY: channel busy time was filled in
 * @SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: extension channel busy time was filled in
 * @SURVEY_INFO_CHANNEL_TIME_RX: channel receive time was filled in
 * @SURVEY_INFO_CHANNEL_TIME_TX: channel transmit time was filled in
Johannes Berg's avatar
Johannes Berg committed
293
 *
294 295 296 297 298
 * Used by the driver to indicate which info in &struct survey_info
 * it has filled in during the get_survey().
 */
enum survey_info_flags {
	SURVEY_INFO_NOISE_DBM = 1<<0,
299
	SURVEY_INFO_IN_USE = 1<<1,
300 301 302 303 304
	SURVEY_INFO_CHANNEL_TIME = 1<<2,
	SURVEY_INFO_CHANNEL_TIME_BUSY = 1<<3,
	SURVEY_INFO_CHANNEL_TIME_EXT_BUSY = 1<<4,
	SURVEY_INFO_CHANNEL_TIME_RX = 1<<5,
	SURVEY_INFO_CHANNEL_TIME_TX = 1<<6,
305 306 307 308 309 310 311 312 313
};

/**
 * struct survey_info - channel survey response
 *
 * @channel: the channel this survey record reports, mandatory
 * @filled: bitflag of flags from &enum survey_info_flags
 * @noise: channel noise in dBm. This and all following fields are
 *     optional
314 315 316 317 318
 * @channel_time: amount of time in ms the radio spent on the channel
 * @channel_time_busy: amount of time the primary channel was sensed busy
 * @channel_time_ext_busy: amount of time the extension channel was sensed busy
 * @channel_time_rx: amount of time the radio spent receiving data
 * @channel_time_tx: amount of time the radio spent transmitting data
319
 *
Johannes Berg's avatar
Johannes Berg committed
320 321
 * Used by dump_survey() to report back per-channel survey information.
 *
322 323 324 325 326
 * This structure can later be expanded with things like
 * channel duty cycle etc.
 */
struct survey_info {
	struct ieee80211_channel *channel;
327 328 329 330 331
	u64 channel_time;
	u64 channel_time_busy;
	u64 channel_time_ext_busy;
	u64 channel_time_rx;
	u64 channel_time_tx;
332 333 334 335
	u32 filled;
	s8 noise;
};

336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365
/**
 * struct cfg80211_crypto_settings - Crypto settings
 * @wpa_versions: indicates which, if any, WPA versions are enabled
 *	(from enum nl80211_wpa_versions)
 * @cipher_group: group key cipher suite (or 0 if unset)
 * @n_ciphers_pairwise: number of AP supported unicast ciphers
 * @ciphers_pairwise: unicast key cipher suites
 * @n_akm_suites: number of AKM suites
 * @akm_suites: AKM suites
 * @control_port: Whether user space controls IEEE 802.1X port, i.e.,
 *	sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
 *	required to assume that the port is unauthorized until authorized by
 *	user space. Otherwise, port is marked authorized by default.
 * @control_port_ethertype: the control port protocol that should be
 *	allowed through even on unauthorized ports
 * @control_port_no_encrypt: TRUE to prevent encryption of control port
 *	protocol frames.
 */
struct cfg80211_crypto_settings {
	u32 wpa_versions;
	u32 cipher_group;
	int n_ciphers_pairwise;
	u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES];
	int n_akm_suites;
	u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
	bool control_port;
	__be16 control_port_ethertype;
	bool control_port_no_encrypt;
};

366 367 368 369 370 371 372 373 374 375 376 377 378
/**
 * struct beacon_parameters - beacon parameters
 *
 * Used to configure the beacon for an interface.
 *
 * @head: head portion of beacon (before TIM IE)
 *     or %NULL if not changed
 * @tail: tail portion of beacon (after TIM IE)
 *     or %NULL if not changed
 * @interval: beacon interval or zero if not changed
 * @dtim_period: DTIM period or zero if not changed
 * @head_len: length of @head
 * @tail_len: length of @tail
379 380 381 382
 * @ssid: SSID to be used in the BSS (note: may be %NULL if not provided from
 *	user space)
 * @ssid_len: length of @ssid
 * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames
383 384 385
 * @crypto: crypto settings
 * @privacy: the BSS uses privacy
 * @auth_type: Authentication type (algorithm)
386 387 388 389 390 391 392 393
 * @beacon_ies: extra information element(s) to add into Beacon frames or %NULL
 * @beacon_ies_len: length of beacon_ies in octets
 * @proberesp_ies: extra information element(s) to add into Probe Response
 *	frames or %NULL
 * @proberesp_ies_len: length of proberesp_ies in octets
 * @assocresp_ies: extra information element(s) to add into (Re)Association
 *	Response frames or %NULL
 * @assocresp_ies_len: length of assocresp_ies in octets
394 395 396 397 398
 */
struct beacon_parameters {
	u8 *head, *tail;
	int interval, dtim_period;
	int head_len, tail_len;
399 400 401
	const u8 *ssid;
	size_t ssid_len;
	enum nl80211_hidden_ssid hidden_ssid;
402 403 404
	struct cfg80211_crypto_settings crypto;
	bool privacy;
	enum nl80211_auth_type auth_type;
405 406 407 408 409 410
	const u8 *beacon_ies;
	size_t beacon_ies_len;
	const u8 *proberesp_ies;
	size_t proberesp_ies_len;
	const u8 *assocresp_ies;
	size_t assocresp_ies_len;
411 412
};

413 414 415 416 417
/**
 * enum plink_action - actions to perform in mesh peers
 *
 * @PLINK_ACTION_INVALID: action 0 is reserved
 * @PLINK_ACTION_OPEN: start mesh peer link establishment
Johannes Berg's avatar
Johannes Berg committed
418
 * @PLINK_ACTION_BLOCK: block traffic from this mesh peer
419 420 421 422 423 424 425
 */
enum plink_actions {
	PLINK_ACTION_INVALID,
	PLINK_ACTION_OPEN,
	PLINK_ACTION_BLOCK,
};

426 427 428 429 430 431 432 433 434 435 436
/**
 * enum station_parameters_apply_mask - station parameter values to apply
 * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
 *
 * Not all station parameters have in-band "no change" signalling,
 * for those that don't these flags will are used.
 */
enum station_parameters_apply_mask {
	STATION_PARAM_APPLY_UAPSD = BIT(0),
};

437 438 439 440 441 442 443 444 445
/**
 * struct station_parameters - station parameters
 *
 * Used to change and create a new station.
 *
 * @vlan: vlan interface station should belong to
 * @supported_rates: supported rates in IEEE 802.11 format
 *	(or NULL for no change)
 * @supported_rates_len: number of supported rates
446 447 448 449
 * @sta_flags_mask: station flags that changed
 *	(bitmask of BIT(NL80211_STA_FLAG_...))
 * @sta_flags_set: station flags values
 *	(bitmask of BIT(NL80211_STA_FLAG_...))
450 451
 * @listen_interval: listen interval or -1 for no change
 * @aid: AID or zero for no change
Johannes Berg's avatar
Johannes Berg committed
452
 * @plink_action: plink action to take
453
 * @plink_state: set the peer link state for a station
Johannes Berg's avatar
Johannes Berg committed
454
 * @ht_capa: HT capabilities of station
455 456 457 458
 * @uapsd_queues: bitmap of queues configured for uapsd. same format
 *	as the AC bitmap in the QoS info field
 * @max_sp: max Service Period. same format as the MAX_SP in the
 *	QoS info field (but already shifted down)
459 460 461
 * @sta_modify_mask: bitmap indicating which parameters changed
 *	(for those that don't have a natural "no change" value),
 *	see &enum station_parameters_apply_mask
462 463 464 465
 */
struct station_parameters {
	u8 *supported_rates;
	struct net_device *vlan;
466
	u32 sta_flags_mask, sta_flags_set;
467
	u32 sta_modify_mask;
468 469 470
	int listen_interval;
	u16 aid;
	u8 supported_rates_len;
471
	u8 plink_action;
472
	u8 plink_state;
473
	struct ieee80211_ht_cap *ht_capa;
474 475
	u8 uapsd_queues;
	u8 max_sp;
476 477
};

478
/**
479
 * enum station_info_flags - station information flags
480
 *
481 482
 * Used by the driver to indicate which info in &struct station_info
 * it has filled in during get_station() or dump_station().
483
 *
484 485 486 487 488 489
 * @STATION_INFO_INACTIVE_TIME: @inactive_time filled
 * @STATION_INFO_RX_BYTES: @rx_bytes filled
 * @STATION_INFO_TX_BYTES: @tx_bytes filled
 * @STATION_INFO_LLID: @llid filled
 * @STATION_INFO_PLID: @plid filled
 * @STATION_INFO_PLINK_STATE: @plink_state filled
490
 * @STATION_INFO_SIGNAL: @signal filled
491
 * @STATION_INFO_TX_BITRATE: @txrate fields are filled
492
 *  (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
493 494
 * @STATION_INFO_RX_PACKETS: @rx_packets filled
 * @STATION_INFO_TX_PACKETS: @tx_packets filled
495 496
 * @STATION_INFO_TX_RETRIES: @tx_retries filled
 * @STATION_INFO_TX_FAILED: @tx_failed filled
497
 * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
498
 * @STATION_INFO_SIGNAL_AVG: @signal_avg filled
499
 * @STATION_INFO_RX_BITRATE: @rxrate fields are filled
500
 * @STATION_INFO_BSS_PARAM: @bss_param filled
501
 * @STATION_INFO_CONNECTED_TIME: @connected_time filled
502
 * @STATION_INFO_ASSOC_REQ_IES: @assoc_req_ies filled
503
 * @STATION_INFO_STA_FLAGS: @sta_flags filled
504
 */
505 506 507 508 509 510 511
enum station_info_flags {
	STATION_INFO_INACTIVE_TIME	= 1<<0,
	STATION_INFO_RX_BYTES		= 1<<1,
	STATION_INFO_TX_BYTES		= 1<<2,
	STATION_INFO_LLID		= 1<<3,
	STATION_INFO_PLID		= 1<<4,
	STATION_INFO_PLINK_STATE	= 1<<5,
512 513
	STATION_INFO_SIGNAL		= 1<<6,
	STATION_INFO_TX_BITRATE		= 1<<7,
514 515
	STATION_INFO_RX_PACKETS		= 1<<8,
	STATION_INFO_TX_PACKETS		= 1<<9,
516 517
	STATION_INFO_TX_RETRIES		= 1<<10,
	STATION_INFO_TX_FAILED		= 1<<11,
518
	STATION_INFO_RX_DROP_MISC	= 1<<12,
519
	STATION_INFO_SIGNAL_AVG		= 1<<13,
520
	STATION_INFO_RX_BITRATE		= 1<<14,
521
	STATION_INFO_BSS_PARAM          = 1<<15,
522
	STATION_INFO_CONNECTED_TIME	= 1<<16,
523 524
	STATION_INFO_ASSOC_REQ_IES	= 1<<17,
	STATION_INFO_STA_FLAGS		= 1<<18
525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555
};

/**
 * enum station_info_rate_flags - bitrate info flags
 *
 * Used by the driver to indicate the specific rate transmission
 * type for 802.11n transmissions.
 *
 * @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled
 * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission
 * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
 */
enum rate_info_flags {
	RATE_INFO_FLAGS_MCS		= 1<<0,
	RATE_INFO_FLAGS_40_MHZ_WIDTH	= 1<<1,
	RATE_INFO_FLAGS_SHORT_GI	= 1<<2,
};

/**
 * struct rate_info - bitrate information
 *
 * Information about a receiving or transmitting bitrate
 *
 * @flags: bitflag of flags from &enum rate_info_flags
 * @mcs: mcs index if struct describes a 802.11n bitrate
 * @legacy: bitrate in 100kbit/s for 802.11abg
 */
struct rate_info {
	u8 flags;
	u8 mcs;
	u16 legacy;
556 557
};

558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588
/**
 * enum station_info_rate_flags - bitrate info flags
 *
 * Used by the driver to indicate the specific rate transmission
 * type for 802.11n transmissions.
 *
 * @BSS_PARAM_FLAGS_CTS_PROT: whether CTS protection is enabled
 * @BSS_PARAM_FLAGS_SHORT_PREAMBLE: whether short preamble is enabled
 * @BSS_PARAM_FLAGS_SHORT_SLOT_TIME: whether short slot time is enabled
 */
enum bss_param_flags {
	BSS_PARAM_FLAGS_CTS_PROT	= 1<<0,
	BSS_PARAM_FLAGS_SHORT_PREAMBLE	= 1<<1,
	BSS_PARAM_FLAGS_SHORT_SLOT_TIME	= 1<<2,
};

/**
 * struct sta_bss_parameters - BSS parameters for the attached station
 *
 * Information about the currently associated BSS
 *
 * @flags: bitflag of flags from &enum bss_param_flags
 * @dtim_period: DTIM period for the BSS
 * @beacon_interval: beacon interval
 */
struct sta_bss_parameters {
	u8 flags;
	u8 dtim_period;
	u16 beacon_interval;
};

589
/**
590
 * struct station_info - station information
591
 *
592
 * Station information filled by driver for get_station() and dump_station.
593
 *
594
 * @filled: bitflag of flags from &enum station_info_flags
595
 * @connected_time: time(in secs) since a station is last connected
596 597 598
 * @inactive_time: time since last station activity (tx/rx) in milliseconds
 * @rx_bytes: bytes received from this station
 * @tx_bytes: bytes transmitted to this station
599 600 601
 * @llid: mesh local link id
 * @plid: mesh peer link id
 * @plink_state: mesh peer link state
602
 * @signal: signal strength of last received packet in dBm
603
 * @signal_avg: signal strength average in dBm
604 605
 * @txrate: current unicast bitrate from this station
 * @rxrate: current unicast bitrate to this station
606 607
 * @rx_packets: packets received from this station
 * @tx_packets: packets transmitted to this station
608 609
 * @tx_retries: cumulative retry counts
 * @tx_failed: number of failed transmissions (retries exceeded, no ACK)
610
 * @rx_dropped_misc:  Dropped for un-specified reason.
611
 * @bss_param: current BSS parameters
612 613 614 615
 * @generation: generation number for nl80211 dumps.
 *	This number should increase every time the list of stations
 *	changes, i.e. when a station is added or removed, so that
 *	userspace can tell whether it got a consistent snapshot.
616 617 618 619 620
 * @assoc_req_ies: IEs from (Re)Association Request.
 *	This is used only when in AP mode with drivers that do not use
 *	user space MLME/SME implementation. The information is provided for
 *	the cfg80211_new_sta() calls to notify user space of the IEs.
 * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets.
621
 * @sta_flags: station flags mask & values
622
 */
623
struct station_info {
624
	u32 filled;
625
	u32 connected_time;
626 627 628
	u32 inactive_time;
	u32 rx_bytes;
	u32 tx_bytes;
629 630 631
	u16 llid;
	u16 plid;
	u8 plink_state;
632
	s8 signal;
633
	s8 signal_avg;
634
	struct rate_info txrate;
635
	struct rate_info rxrate;
636 637
	u32 rx_packets;
	u32 tx_packets;
638 639
	u32 tx_retries;
	u32 tx_failed;
640
	u32 rx_dropped_misc;
641
	struct sta_bss_parameters bss_param;
642
	struct nl80211_sta_flag_update sta_flags;
643 644

	int generation;
645 646 647

	const u8 *assoc_req_ies;
	size_t assoc_req_ies_len;
648 649 650 651 652

	/*
	 * Note: Add a new enum station_info_flags value for each new field and
	 * use it to check which fields are initialized.
	 */
653 654
};

655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674
/**
 * enum monitor_flags - monitor flags
 *
 * Monitor interface configuration flags. Note that these must be the bits
 * according to the nl80211 flags.
 *
 * @MONITOR_FLAG_FCSFAIL: pass frames with bad FCS
 * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP
 * @MONITOR_FLAG_CONTROL: pass control frames
 * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering
 * @MONITOR_FLAG_COOK_FRAMES: report frames after processing
 */
enum monitor_flags {
	MONITOR_FLAG_FCSFAIL		= 1<<NL80211_MNTR_FLAG_FCSFAIL,
	MONITOR_FLAG_PLCPFAIL		= 1<<NL80211_MNTR_FLAG_PLCPFAIL,
	MONITOR_FLAG_CONTROL		= 1<<NL80211_MNTR_FLAG_CONTROL,
	MONITOR_FLAG_OTHER_BSS		= 1<<NL80211_MNTR_FLAG_OTHER_BSS,
	MONITOR_FLAG_COOK_FRAMES	= 1<<NL80211_MNTR_FLAG_COOK_FRAMES,
};

675 676 677 678 679 680
/**
 * enum mpath_info_flags -  mesh path information flags
 *
 * Used by the driver to indicate which info in &struct mpath_info it has filled
 * in during get_station() or dump_station().
 *
Johannes Berg's avatar
Johannes Berg committed
681 682 683 684 685 686 687
 * @MPATH_INFO_FRAME_QLEN: @frame_qlen filled
 * @MPATH_INFO_SN: @sn filled
 * @MPATH_INFO_METRIC: @metric filled
 * @MPATH_INFO_EXPTIME: @exptime filled
 * @MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled
 * @MPATH_INFO_DISCOVERY_RETRIES: @discovery_retries filled
 * @MPATH_INFO_FLAGS: @flags filled
688 689 690
 */
enum mpath_info_flags {
	MPATH_INFO_FRAME_QLEN		= BIT(0),
691
	MPATH_INFO_SN			= BIT(1),
692 693 694 695 696 697 698 699 700 701 702 703 704 705
	MPATH_INFO_METRIC		= BIT(2),
	MPATH_INFO_EXPTIME		= BIT(3),
	MPATH_INFO_DISCOVERY_TIMEOUT	= BIT(4),
	MPATH_INFO_DISCOVERY_RETRIES	= BIT(5),
	MPATH_INFO_FLAGS		= BIT(6),
};

/**
 * struct mpath_info - mesh path information
 *
 * Mesh path information filled by driver for get_mpath() and dump_mpath().
 *
 * @filled: bitfield of flags from &enum mpath_info_flags
 * @frame_qlen: number of queued frames for this destination
706
 * @sn: target sequence number
707 708 709 710 711
 * @metric: metric (cost) of this mesh path
 * @exptime: expiration time for the mesh path from now, in msecs
 * @flags: mesh path flags
 * @discovery_timeout: total mesh path discovery timeout, in msecs
 * @discovery_retries: mesh path discovery retries
712 713 714 715
 * @generation: generation number for nl80211 dumps.
 *	This number should increase every time the list of mesh paths
 *	changes, i.e. when a station is added or removed, so that
 *	userspace can tell whether it got a consistent snapshot.
716 717 718 719
 */
struct mpath_info {
	u32 filled;
	u32 frame_qlen;
720
	u32 sn;
721 722 723 724 725
	u32 metric;
	u32 exptime;
	u32 discovery_timeout;
	u8 discovery_retries;
	u8 flags;
726 727

	int generation;
728 729
};

730 731 732 733 734 735 736 737 738 739 740
/**
 * struct bss_parameters - BSS parameters
 *
 * Used to change BSS parameters (mainly for AP mode).
 *
 * @use_cts_prot: Whether to use CTS protection
 *	(0 = no, 1 = yes, -1 = do not change)
 * @use_short_preamble: Whether the use of short preambles is allowed
 *	(0 = no, 1 = yes, -1 = do not change)
 * @use_short_slot_time: Whether the use of short slot time is allowed
 *	(0 = no, 1 = yes, -1 = do not change)
741 742 743
 * @basic_rates: basic rates in IEEE 802.11 format
 *	(or NULL for no change)
 * @basic_rates_len: number of basic rates
744
 * @ap_isolate: do not forward packets between connected stations
745 746
 * @ht_opmode: HT Operation mode
 * 	(u16 = opmode, -1 = do not change)
747 748 749 750 751
 */
struct bss_parameters {
	int use_cts_prot;
	int use_short_preamble;
	int use_short_slot_time;
752 753
	u8 *basic_rates;
	u8 basic_rates_len;
754
	int ap_isolate;
755
	int ht_opmode;
756
};
757

758 759 760 761 762
/*
 * struct mesh_config - 802.11s mesh configuration
 *
 * These parameters can be changed while the mesh is active.
 */
763 764 765 766 767 768 769 770 771
struct mesh_config {
	/* Timeouts in ms */
	/* Mesh plink management parameters */
	u16 dot11MeshRetryTimeout;
	u16 dot11MeshConfirmTimeout;
	u16 dot11MeshHoldingTimeout;
	u16 dot11MeshMaxPeerLinks;
	u8  dot11MeshMaxRetries;
	u8  dot11MeshTTL;
772 773
	/* ttl used in path selection information elements */
	u8  element_ttl;
774 775 776 777 778 779 780 781
	bool auto_open_plinks;
	/* HWMP parameters */
	u8  dot11MeshHWMPmaxPREQretries;
	u32 path_refresh_time;
	u16 min_discovery_timeout;
	u32 dot11MeshHWMPactivePathTimeout;
	u16 dot11MeshHWMPpreqMinInterval;
	u16 dot11MeshHWMPnetDiameterTraversalTime;
782
	u8  dot11MeshHWMPRootMode;
783
	u16 dot11MeshHWMPRannInterval;
784 785 786 787 788
	/* This is missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol
	 * set to true only means that the station will announce others it's a
	 * mesh gate, but not necessarily using the gate announcement protocol.
	 * Still keeping the same nomenclature to be in sync with the spec. */
	bool  dot11MeshGateAnnouncementProtocol;
789 790
};

791 792 793 794
/**
 * struct mesh_setup - 802.11s mesh setup configuration
 * @mesh_id: the mesh ID
 * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes
795 796
 * @path_sel_proto: which path selection protocol to use
 * @path_metric: which metric to use
797 798
 * @ie: vendor information elements (optional)
 * @ie_len: length of vendor information elements
799 800
 * @is_authenticated: this mesh requires authentication
 * @is_secure: this mesh uses security
801 802 803 804 805 806
 *
 * These parameters are fixed when the mesh is created.
 */
struct mesh_setup {
	const u8 *mesh_id;
	u8 mesh_id_len;
807 808
	u8  path_sel_proto;
	u8  path_metric;
809 810
	const u8 *ie;
	u8 ie_len;
811
	bool is_authenticated;
812
	bool is_secure;
813 814
};

815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832
/**
 * struct ieee80211_txq_params - TX queue parameters
 * @queue: TX queue identifier (NL80211_TXQ_Q_*)
 * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
 * @cwmin: Minimum contention window [a value of the form 2^n-1 in the range
 *	1..32767]
 * @cwmax: Maximum contention window [a value of the form 2^n-1 in the range
 *	1..32767]
 * @aifs: Arbitration interframe space [0..255]
 */
struct ieee80211_txq_params {
	enum nl80211_txq_q queue;
	u16 txop;
	u16 cwmin;
	u16 cwmax;
	u8 aifs;
};

833 834 835
/* from net/wireless.h */
struct wiphy;

836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857
/**
 * DOC: Scanning and BSS list handling
 *
 * The scanning process itself is fairly simple, but cfg80211 offers quite
 * a bit of helper functionality. To start a scan, the scan operation will
 * be invoked with a scan definition. This scan definition contains the
 * channels to scan, and the SSIDs to send probe requests for (including the
 * wildcard, if desired). A passive scan is indicated by having no SSIDs to
 * probe. Additionally, a scan request may contain extra information elements
 * that should be added to the probe request. The IEs are guaranteed to be
 * well-formed, and will not exceed the maximum length the driver advertised
 * in the wiphy structure.
 *
 * When scanning finds a BSS, cfg80211 needs to be notified of that, because
 * it is responsible for maintaining the BSS list; the driver should not
 * maintain a list itself. For this notification, various functions exist.
 *
 * Since drivers do not maintain a BSS list, there are also a number of
 * functions to search for a BSS and obtain information about it from the
 * BSS structure cfg80211 maintains. The BSS list is also made available
 * to userspace.
 */
858

859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874
/**
 * struct cfg80211_ssid - SSID description
 * @ssid: the SSID
 * @ssid_len: length of the ssid
 */
struct cfg80211_ssid {
	u8 ssid[IEEE80211_MAX_SSID_LEN];
	u8 ssid_len;
};

/**
 * struct cfg80211_scan_request - scan request description
 *
 * @ssids: SSIDs to scan for (active scan only)
 * @n_ssids: number of SSIDs
 * @channels: channels to scan on.
875
 * @n_channels: total number of channels to scan
876 877
 * @ie: optional information element(s) to add into Probe Request or %NULL
 * @ie_len: length of ie in octets
878
 * @rates: bitmap of rates to advertise for each band
879
 * @wiphy: the wiphy this was for
880
 * @dev: the interface
Johannes Berg's avatar
Johannes Berg committed
881
 * @aborted: (internal) scan request was notified as aborted
882
 * @no_cck: used to send probe requests at non CCK rate in 2GHz band
883 884 885 886 887
 */
struct cfg80211_scan_request {
	struct cfg80211_ssid *ssids;
	int n_ssids;
	u32 n_channels;
888
	const u8 *ie;
889
	size_t ie_len;
890

891 892
	u32 rates[IEEE80211_NUM_BANDS];

893 894
	/* internal */
	struct wiphy *wiphy;
895
	struct net_device *dev;
Johannes Berg's avatar
Johannes Berg committed
896
	bool aborted;
897
	bool no_cck;
898 899 900

	/* keep last */
	struct ieee80211_channel *channels[0];
901 902
};

903 904 905 906 907 908 909 910 911
/**
 * struct cfg80211_match_set - sets of attributes to match
 *
 * @ssid: SSID to be matched
 */
struct cfg80211_match_set {
	struct cfg80211_ssid ssid;
};

912 913 914 915 916 917
/**
 * struct cfg80211_sched_scan_request - scheduled scan request description
 *
 * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
 * @n_ssids: number of SSIDs
 * @n_channels: total number of channels to scan
918
 * @interval: interval between each scheduled scan cycle
919 920
 * @ie: optional information element(s) to add into Probe Request or %NULL
 * @ie_len: length of ie in octets
921 922 923 924 925
 * @match_sets: sets of parameters to be matched for a scan result
 * 	entry to be considered valid and to be passed to the host
 * 	(others are filtered out).
 *	If ommited, all results are passed.
 * @n_match_sets: number of match sets
926 927 928 929 930 931 932 933
 * @wiphy: the wiphy this was for
 * @dev: the interface
 * @channels: channels to scan
 */
struct cfg80211_sched_scan_request {
	struct cfg80211_ssid *ssids;
	int n_ssids;
	u32 n_channels;
934
	u32 interval;
935 936
	const u8 *ie;
	size_t ie_len;
937 938
	struct cfg80211_match_set *match_sets;
	int n_match_sets;
939 940 941 942 943 944 945 946 947

	/* internal */
	struct wiphy *wiphy;
	struct net_device *dev;

	/* keep last */
	struct ieee80211_channel *channels[0];
};

948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966
/**
 * enum cfg80211_signal_type - signal type
 *
 * @CFG80211_SIGNAL_TYPE_NONE: no signal strength information available
 * @CFG80211_SIGNAL_TYPE_MBM: signal strength in mBm (100*dBm)
 * @CFG80211_SIGNAL_TYPE_UNSPEC: signal strength, increasing from 0 through 100
 */
enum cfg80211_signal_type {
	CFG80211_SIGNAL_TYPE_NONE,
	CFG80211_SIGNAL_TYPE_MBM,
	CFG80211_SIGNAL_TYPE_UNSPEC,
};

/**
 * struct cfg80211_bss - BSS description
 *
 * This structure describes a BSS (which may also be a mesh network)
 * for use in scan results and similar.
 *
Johannes Berg's avatar
Johannes Berg committed
967
 * @channel: channel this BSS is on
968 969 970 971 972
 * @bssid: BSSID of the BSS
 * @tsf: timestamp of last received update
 * @beacon_interval: the beacon interval as from the frame
 * @capability: the capability field in host byte order
 * @information_elements: the information elements (Note that there
973 974 975
 *	is no guarantee that these are well-formed!); this is a pointer to
 *	either the beacon_ies or proberesp_ies depending on whether Probe
 *	Response frame has been received
976
 * @len_information_elements: total length of the information elements
977 978 979 980
 * @beacon_ies: the information elements from the last Beacon frame
 * @len_beacon_ies: total length of the beacon_ies
 * @proberesp_ies: the information elements from the last Probe Response frame
 * @len_proberesp_ies: total length of the proberesp_ies
Johannes Berg's avatar
Johannes Berg committed
981
 * @signal: signal strength value (type depends on the wiphy's signal_type)
982
 * @free_priv: function pointer to free private data
983 984 985 986 987 988 989 990 991 992 993
 * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes
 */
struct cfg80211_bss {
	struct ieee80211_channel *channel;

	u8 bssid[ETH_ALEN];
	u64 tsf;
	u16 beacon_interval;
	u16 capability;
	u8 *information_elements;
	size_t len_information_elements;
994 995 996 997
	u8 *beacon_ies;
	size_t len_beacon_ies;
	u8 *proberesp_ies;
	size_t len_proberesp_ies;
998 999 1000

	s32 signal;

1001
	void (*free_priv)(struct cfg80211_bss *bss);
1002 1003 1004
	u8 priv[0] __attribute__((__aligned__(sizeof(void *))));
};

1005 1006 1007 1008 1009 1010 1011 1012 1013
/**
 * ieee80211_bss_get_ie - find IE with given ID
 * @bss: the bss to search
 * @ie: the IE ID
 * Returns %NULL if not found.
 */
const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);


1014 1015 1016 1017 1018
/**
 * struct cfg80211_auth_request - Authentication request data
 *
 * This structure provides information needed to complete IEEE 802.11
 * authentication.
Johannes Berg's avatar
Johannes Berg committed
1019 1020
 *
 * @bss: The BSS to authenticate with.
1021 1022 1023
 * @auth_type: Authentication type (algorithm)
 * @ie: Extra IEs to add to Authentication frame or %NULL
 * @ie_len: Length of ie buffer in octets
Johannes Berg's avatar
Johannes Berg committed
1024 1025 1026
 * @key_len: length of WEP key for shared key authentication
 * @key_idx: index of WEP key for shared key authentication
 * @key: WEP key for shared key authentication
1027 1028 1029 1030
 * @local_state_change: This is a request for a local state only, i.e., no
 *	Authentication frame is to be transmitted and authentication state is
 *	to be changed without having to wait for a response from the peer STA
 *	(AP).
1031 1032
 */
struct cfg80211_auth_request {
Johannes Berg's avatar
Johannes Berg committed
1033
	struct cfg80211_bss *bss;
1034 1035
	const u8 *ie;
	size_t ie_len;
Johannes Berg's avatar
Johannes Berg committed
1036
	enum nl80211_auth_type auth_type;
Johannes Berg's avatar
Johannes Berg committed
1037 1038
	const u8 *key;
	u8 key_len, key_idx;
1039
	bool local_state_change;
1040 1041 1042 1043 1044 1045 1046
};

/**
 * struct cfg80211_assoc_request - (Re)Association request data
 *
 * This structure provides information needed to complete IEEE 802.11
 * (re)association.
Johannes Berg's avatar
Johannes Berg committed
1047
 * @bss: The BSS to associate with.
1048 1049
 * @ie: Extra IEs to add to (Re)Association Request frame or %NULL
 * @ie_len: Length of ie buffer in octets
1050
 * @use_mfp: Use management frame protection (IEEE 802.11w) in this association
1051
 * @crypto: crypto settings
1052
 * @prev_bssid: previous BSSID, if not %NULL use reassociate frame
1053 1054
 */
struct cfg80211_assoc_request {
Johannes Berg's avatar
Johannes Berg committed
1055
	struct cfg80211_bss *bss;
1056
	const u8 *ie, *prev_bssid;
1057
	size_t ie_len;
1058
	struct cfg80211_crypto_settings crypto;
Johannes Berg's avatar
Johannes Berg committed
1059
	bool use_mfp;
1060 1061 1062 1063 1064 1065 1066 1067
};

/**
 * struct cfg80211_deauth_request - Deauthentication request data
 *
 * This structure provides information needed to complete IEEE 802.11
 * deauthentication.
 *
Johannes Berg's avatar
Johannes Berg committed
1068
 * @bss: the BSS to deauthenticate from
1069 1070
 * @ie: Extra IEs to add to Deauthentication frame or %NULL
 * @ie_len: Length of ie buffer in octets
Johannes Berg's avatar
Johannes Berg committed
1071
 * @reason_code: The reason code for the deauthentication
1072 1073
 * @local_state_change: This is a request for a local state only, i.e., no
 *	Deauthentication frame is to be transmitted.
1074 1075
 */
struct cfg80211_deauth_request {
Johannes Berg's avatar
Johannes Berg committed
1076
	struct cfg80211_bss *bss;
1077 1078
	const u8 *ie;
	size_t ie_len;
Johannes Berg's avatar
Johannes Berg committed
1079
	u16 reason_code;
1080
	bool local_state_change;
1081 1082 1083 1084 1085 1086 1087 1088
};

/**
 * struct cfg80211_disassoc_request - Disassociation request data
 *
 * This structure provides information needed to complete IEEE 802.11
 * disassocation.
 *
Johannes Berg's avatar
Johannes Berg committed
1089
 * @bss: the BSS to disassociate from
1090 1091
 * @ie: Extra IEs to add to Disassociation frame or %NULL
 * @ie_len: Length of ie buffer in octets
Johannes Berg's avatar
Johannes Berg committed
1092
 * @reason_code: The reason code for the disassociation
1093 1094
 * @local_state_change: This is a request for a local state only, i.e., no
 *	Disassociation frame is to be transmitted.
1095 1096
 */
struct cfg80211_disassoc_request {
Johannes Berg's avatar
Johannes Berg committed
1097
	struct cfg80211_bss *bss;
1098 1099
	const u8 *ie;
	size_t ie_len;
Johannes Berg's avatar
Johannes Berg committed
1100
	u16 reason_code;
1101
	bool local_state_change;
1102 1103
};

Johannes Berg's avatar
Johannes Berg committed
1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118
/**
 * struct cfg80211_ibss_params - IBSS parameters
 *
 * This structure defines the IBSS parameters for the join_ibss()
 * method.
 *
 * @ssid: The SSID, will always be non-null.
 * @ssid_len: The length of the SSID, will always be non-zero.
 * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not
 *	search for IBSSs with a different BSSID.
 * @channel: The channel to use if no IBSS can be found to join.
 * @channel_fixed: The channel should be fixed -- do not search for
 *	IBSSs to join on other channels.
 * @ie: information element(s) to include in the beacon
 * @ie_len: length of that
1119
 * @beacon_interval: beacon interval to use
Johannes Berg's avatar
Johannes Berg committed
1120 1121
 * @privacy: this is a protected network, keys will be configured
 *	after joining
1122
 * @basic_rates: bitmap of basic rates to use when creating the IBSS
1123
 * @mcast_rate: per-band multicast rate index + 1 (0: disabled)
Johannes Berg's avatar
Johannes Berg committed
1124 1125 1126 1127 1128 1129 1130
 */
struct cfg80211_ibss_params {
	u8 *ssid;
	u8 *bssid;
	struct ieee80211_channel *channel;
	u8 *ie;
	u8 ssid_len, ie_len;
1131
	u16 beacon_interval;
1132
	u32 basic_rates;
Johannes Berg's avatar
Johannes Berg committed
1133
	bool channel_fixed;
Johannes Berg's avatar
Johannes Berg committed
1134
	bool privacy;
1135
	int mcast_rate[IEEE80211_NUM_BANDS];
Johannes Berg's avatar
Johannes Berg committed
1136 1137
};

1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150
/**
 * struct cfg80211_connect_params - Connection parameters
 *
 * This structure provides information needed to complete IEEE 802.11
 * authentication and association.
 *
 * @channel: The channel to use or %NULL if not specified (auto-select based
 *	on scan results)
 * @bssid: The AP BSSID or %NULL if not specified (auto-select based on scan
 *	results)
 * @ssid: SSID
 * @ssid_len: Length of ssid in octets
 * @auth_type: Authentication type (algorithm)
Johannes Berg's avatar
Johannes Berg committed
1151 1152
 * @ie: IEs for association request
 * @ie_len: Length of assoc_ie in octets
1153 1154
 * @privacy: indicates whether privacy-enabled APs should be used
 * @crypto: crypto settings
Johannes Berg's avatar
Johannes Berg committed
1155 1156 1157
 * @key_len: length of WEP key for shared key authentication
 * @key_idx: index of WEP key for shared key authentication
 * @key: WEP key for shared key authentication
1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168
 */
struct cfg80211_connect_params {
	struct ieee80211_channel *channel;
	u8 *bssid;
	u8 *ssid;
	size_t ssid_len;
	enum nl80211_auth_type auth_type;
	u8 *ie;
	size_t ie_len;
	bool privacy;
	struct cfg80211_crypto_settings crypto;
Johannes Berg's avatar
Johannes Berg committed
1169 1170
	const u8 *key;
	u8 key_len, key_idx;
1171 1172
};

1173 1174
/**
 * enum wiphy_params_flags - set_wiphy_params bitfield values
Johannes Berg's avatar
Johannes Berg committed
1175 1176 1177 1178 1179
 * @WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed
 * @WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed
 * @WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed
 * @WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed
 * @WIPHY_PARAM_COVERAGE_CLASS: coverage class changed
1180 1181 1182 1183 1184 1185
 */
enum wiphy_params_flags {
	WIPHY_PARAM_RETRY_SHORT		= 1 << 0,
	WIPHY_PARAM_RETRY_LONG		= 1 << 1,
	WIPHY_PARAM_FRAG_THRESHOLD	= 1 << 2,
	WIPHY_PARAM_RTS_THRESHOLD	= 1 << 3,
1186
	WIPHY_PARAM_COVERAGE_CLASS	= 1 << 4,
1187 1188
};

Johannes Berg's avatar
Johannes Berg committed
1189 1190 1191 1192 1193 1194
/*
 * cfg80211_bitrate_mask - masks for bitrate control
 */
struct cfg80211_bitrate_mask {
	struct {
		u32 legacy;
1195 1196
		/* TODO: add support for masking MCS rates; e.g.: */
		/* u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; */
Johannes Berg's avatar
Johannes Berg committed
1197 1198
	} control[IEEE80211_NUM_BANDS];
};
Samuel Ortiz's avatar
Samuel Ortiz committed
1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211
/**
 * struct cfg80211_pmksa - PMK Security Association
 *
 * This structure is passed to the set/del_pmksa() method for PMKSA
 * caching.
 *
 * @bssid: The AP's BSSID.
 * @pmkid: The PMK material itself.
 */
struct cfg80211_pmksa {
	u8 *bssid;
	u8 *pmkid;
};
Johannes Berg's avatar
Johannes Berg committed
1212

1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237
/**
 * struct cfg80211_wowlan_trig_pkt_pattern - packet pattern
 * @mask: bitmask where to match pattern and where to ignore bytes,
 *	one bit per byte, in same format as nl80211
 * @pattern: bytes to match where bitmask is 1
 * @pattern_len: length of pattern (in bytes)
 *
 * Internal note: @mask and @pattern are allocated in one chunk of
 * memory, free @mask only!
 */
struct cfg80211_wowlan_trig_pkt_pattern {
	u8 *mask, *pattern;
	int pattern_len;
};

/**
 * struct cfg80211_wowlan - Wake on Wireless-LAN support info
 *
 * This structure defines the enabled WoWLAN triggers for the device.
 * @any: wake up on any activity -- special trigger if device continues
 *	operating as normal during suspend
 * @disconnect: wake up if getting disconnected
 * @magic_pkt: wake up on receiving magic packet
 * @patterns: wake up on receiving packet matching a pattern
 * @n_patterns: number of patterns
1238 1239 1240 1241
 * @gtk_rekey_failure: wake up on GTK rekey failure
 * @eap_identity_req: wake up on EAP identity request packet
 * @four_way_handshake: wake up on 4-way handshake
 * @rfkill_release: wake up when rfkill is released
1242 1243
 */
struct cfg80211_wowlan {
1244 1245 1246
	bool any, disconnect, magic_pkt, gtk_rekey_failure,
	     eap_identity_req, four_way_handshake,
	     rfkill_release;
1247 1248 1249 1250
	struct cfg80211_wowlan_trig_pkt_pattern *patterns;
	int n_patterns;
};

1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262
/**
 * struct cfg80211_gtk_rekey_data - rekey data
 * @kek: key encryption key
 * @kck: key confirmation key
 * @replay_ctr: replay counter
 */
struct cfg80211_gtk_rekey_data {
	u8 kek[NL80211_KEK_LEN];
	u8 kck[NL80211_KCK_LEN];
	u8 replay_ctr[NL80211_REPLAY_CTR_LEN];
};

1263 1264 1265 1266 1267 1268 1269 1270 1271
/**
 * struct cfg80211_ops - backend description for wireless configuration
 *
 * This struct is registered by fullmac card drivers and/or wireless stacks
 * in order to handle configuration requests on their interfaces.
 *
 * All callbacks except where otherwise noted should return 0
 * on success or a negative error code.
 *
1272 1273 1274 1275
 * All operations are currently invoked under rtnl for consistency with the
 * wireless extensions but this is subject to reevaluation as soon as this
 * code is used more widely and we have a first user without wext.
 *
1276 1277 1278
 * @suspend: wiphy device needs to be suspended. The variable @wow will
 *	be %NULL or contain the enabled Wake-on-Wireless triggers that are
 *	configured for the device.
Johannes Berg's avatar
Johannes Berg committed
1279 1280
 * @resume: wiphy device needs to be resumed
 *
Johannes Berg's avatar
Johannes Berg committed
1281
 * @add_virtual_intf: create a new virtual interface with the given name,
1282
 *	must set the struct wireless_dev's iftype. Beware: You must create
1283 1284
 *	the new netdev in the wiphy's network namespace! Returns the netdev,
 *	or an ERR_PTR.
1285 1286
 *
 * @del_virtual_intf: remove the virtual interface determined by ifindex.
1287
 *