cfg80211.h 134 KB
Newer Older
1 2
#ifndef __NET_CFG80211_H
#define __NET_CFG80211_H
Johannes Berg's avatar
Johannes Berg committed
3 4 5
/*
 * 802.11 device and configuration interface
 *
6
 * Copyright 2006-2010	Johannes Berg <johannes@sipsolutions.net>
Johannes Berg's avatar
Johannes Berg committed
7 8 9 10 11
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
12

Johannes Berg's avatar
Johannes Berg committed
13 14 15
#include <linux/netdevice.h>
#include <linux/debugfs.h>
#include <linux/list.h>
16
#include <linux/bug.h>
17 18
#include <linux/netlink.h>
#include <linux/skbuff.h>
19
#include <linux/nl80211.h>
20 21
#include <linux/if_ether.h>
#include <linux/ieee80211.h>
Johannes Berg's avatar
Johannes Berg committed
22 23
#include <net/regulatory.h>

24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
/**
 * DOC: Introduction
 *
 * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges
 * userspace and drivers, and offers some utility functionality associated
 * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used
 * by all modern wireless drivers in Linux, so that they offer a consistent
 * API through nl80211. For backward compatibility, cfg80211 also offers
 * wireless extensions to userspace, but hides them from drivers completely.
 *
 * Additionally, cfg80211 contains code to help enforce regulatory spectrum
 * use restrictions.
 */


/**
 * DOC: Device registration
 *
 * In order for a driver to use cfg80211, it must register the hardware device
 * with cfg80211. This happens through a number of hardware capability structs
 * described below.
 *
 * The fundamental structure for each device is the 'wiphy', of which each
 * instance describes a physical wireless device connected to the system. Each
 * such wiphy can have zero, one, or many virtual interfaces associated with
 * it, which need to be identified as such by pointing the network interface's
 * @ieee80211_ptr pointer to a &struct wireless_dev which further describes
 * the wireless part of the interface, normally this struct is embedded in the
 * network interface's private data area. Drivers can optionally allow creating
 * or destroying virtual interfaces on the fly, but without at least one or the
 * ability to create some the wireless device isn't useful.
 *
 * Each wiphy structure contains device capability information, and also has
 * a pointer to the various operations the driver offers. The definitions and
 * structures here describe these capabilities in detail.
 */

61 62
struct wiphy;

63
/*
Johannes Berg's avatar
Johannes Berg committed
64 65 66 67 68 69 70 71
 * wireless hardware capability structures
 */

/**
 * enum ieee80211_band - supported frequency bands
 *
 * The bands are assigned this way because the supported
 * bitrates differ in these bands.
72
 *
Johannes Berg's avatar
Johannes Berg committed
73 74
 * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
 * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
75
 * @IEEE80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
Johannes Berg's avatar
Johannes Berg committed
76
 * @IEEE80211_NUM_BANDS: number of defined bands
77
 */
Johannes Berg's avatar
Johannes Berg committed
78
enum ieee80211_band {
79 80
	IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
	IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
81
	IEEE80211_BAND_60GHZ = NL80211_BAND_60GHZ,
Johannes Berg's avatar
Johannes Berg committed
82 83 84 85

	/* keep last */
	IEEE80211_NUM_BANDS
};
86

87
/**
Johannes Berg's avatar
Johannes Berg committed
88 89 90 91 92 93 94 95 96
 * enum ieee80211_channel_flags - channel flags
 *
 * Channel flags set by the regulatory control code.
 *
 * @IEEE80211_CHAN_DISABLED: This channel is disabled.
 * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
 *	on this channel.
 * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
 * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
97
 * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
Johannes Berg's avatar
Johannes Berg committed
98
 * 	is not permitted.
99
 * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
Johannes Berg's avatar
Johannes Berg committed
100
 * 	is not permitted.
101
 * @IEEE80211_CHAN_NO_OFDM: OFDM is not allowed on this channel.
102
 */
Johannes Berg's avatar
Johannes Berg committed
103 104 105 106 107
enum ieee80211_channel_flags {
	IEEE80211_CHAN_DISABLED		= 1<<0,
	IEEE80211_CHAN_PASSIVE_SCAN	= 1<<1,
	IEEE80211_CHAN_NO_IBSS		= 1<<2,
	IEEE80211_CHAN_RADAR		= 1<<3,
108 109
	IEEE80211_CHAN_NO_HT40PLUS	= 1<<4,
	IEEE80211_CHAN_NO_HT40MINUS	= 1<<5,
110
	IEEE80211_CHAN_NO_OFDM		= 1<<6,
111 112
};

113
#define IEEE80211_CHAN_NO_HT40 \
114
	(IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
115

Johannes Berg's avatar
Johannes Berg committed
116 117 118 119 120 121 122 123 124 125 126 127 128 129
/**
 * struct ieee80211_channel - channel definition
 *
 * This structure describes a single channel for use
 * with cfg80211.
 *
 * @center_freq: center frequency in MHz
 * @hw_value: hardware-specific value for the channel
 * @flags: channel flags from &enum ieee80211_channel_flags.
 * @orig_flags: channel flags at registration time, used by regulatory
 *	code to support devices with additional restrictions
 * @band: band this channel belongs to.
 * @max_antenna_gain: maximum antenna gain in dBi
 * @max_power: maximum transmission power (in dBm)
130
 * @max_reg_power: maximum regulatory transmission power (in dBm)
Johannes Berg's avatar
Johannes Berg committed
131 132
 * @beacon_found: helper to regulatory code to indicate when a beacon
 *	has been found on this channel. Use regulatory_hint_found_beacon()
133
 *	to enable this, this is useful only on 5 GHz band.
Johannes Berg's avatar
Johannes Berg committed
134 135
 * @orig_mag: internal use
 * @orig_mpwr: internal use
Andy Green's avatar
Andy Green committed
136
 */
Johannes Berg's avatar
Johannes Berg committed
137 138 139 140 141 142 143
struct ieee80211_channel {
	enum ieee80211_band band;
	u16 center_freq;
	u16 hw_value;
	u32 flags;
	int max_antenna_gain;
	int max_power;
144
	int max_reg_power;
Johannes Berg's avatar
Johannes Berg committed
145 146 147 148 149
	bool beacon_found;
	u32 orig_flags;
	int orig_mag, orig_mpwr;
};

Andy Green's avatar
Andy Green committed
150
/**
Johannes Berg's avatar
Johannes Berg committed
151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169
 * enum ieee80211_rate_flags - rate flags
 *
 * Hardware/specification flags for rates. These are structured
 * in a way that allows using the same bitrate structure for
 * different bands/PHY modes.
 *
 * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
 *	preamble on this bitrate; only relevant in 2.4GHz band and
 *	with CCK rates.
 * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
 *	when used with 802.11a (on the 5 GHz band); filled by the
 *	core code when registering the wiphy.
 * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
 *	when used with 802.11b (on the 2.4 GHz band); filled by the
 *	core code when registering the wiphy.
 * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
 *	when used with 802.11g (on the 2.4 GHz band); filled by the
 *	core code when registering the wiphy.
 * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
Andy Green's avatar
Andy Green committed
170
 */
Johannes Berg's avatar
Johannes Berg committed
171 172 173 174 175 176 177
enum ieee80211_rate_flags {
	IEEE80211_RATE_SHORT_PREAMBLE	= 1<<0,
	IEEE80211_RATE_MANDATORY_A	= 1<<1,
	IEEE80211_RATE_MANDATORY_B	= 1<<2,
	IEEE80211_RATE_MANDATORY_G	= 1<<3,
	IEEE80211_RATE_ERP_G		= 1<<4,
};
Andy Green's avatar
Andy Green committed
178

Johannes Berg's avatar
Johannes Berg committed
179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197
/**
 * struct ieee80211_rate - bitrate definition
 *
 * This structure describes a bitrate that an 802.11 PHY can
 * operate with. The two values @hw_value and @hw_value_short
 * are only for driver use when pointers to this structure are
 * passed around.
 *
 * @flags: rate-specific flags
 * @bitrate: bitrate in units of 100 Kbps
 * @hw_value: driver/hardware value for this rate
 * @hw_value_short: driver/hardware value for this rate when
 *	short preamble is used
 */
struct ieee80211_rate {
	u32 flags;
	u16 bitrate;
	u16 hw_value, hw_value_short;
};
Andy Green's avatar
Andy Green committed
198

Johannes Berg's avatar
Johannes Berg committed
199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216
/**
 * struct ieee80211_sta_ht_cap - STA's HT capabilities
 *
 * This structure describes most essential parameters needed
 * to describe 802.11n HT capabilities for an STA.
 *
 * @ht_supported: is HT supported by the STA
 * @cap: HT capabilities map as described in 802.11n spec
 * @ampdu_factor: Maximum A-MPDU length factor
 * @ampdu_density: Minimum A-MPDU spacing
 * @mcs: Supported MCS rates
 */
struct ieee80211_sta_ht_cap {
	u16 cap; /* use IEEE80211_HT_CAP_ */
	bool ht_supported;
	u8 ampdu_factor;
	u8 ampdu_density;
	struct ieee80211_mcs_info mcs;
Andy Green's avatar
Andy Green committed
217 218
};

219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234
/**
 * struct ieee80211_sta_vht_cap - STA's VHT capabilities
 *
 * This structure describes most essential parameters needed
 * to describe 802.11ac VHT capabilities for an STA.
 *
 * @vht_supported: is VHT supported by the STA
 * @cap: VHT capabilities map as described in 802.11ac spec
 * @vht_mcs: Supported VHT MCS rates
 */
struct ieee80211_sta_vht_cap {
	bool vht_supported;
	u32 cap; /* use IEEE80211_VHT_CAP_ */
	struct ieee80211_vht_mcs_info vht_mcs;
};

Johannes Berg's avatar
Johannes Berg committed
235 236 237 238 239 240 241 242 243 244 245 246 247 248
/**
 * struct ieee80211_supported_band - frequency band definition
 *
 * This structure describes a frequency band a wiphy
 * is able to operate in.
 *
 * @channels: Array of channels the hardware can operate in
 *	in this band.
 * @band: the band this structure represents
 * @n_channels: Number of channels in @channels
 * @bitrates: Array of bitrates the hardware can operate with
 *	in this band. Must be sorted to give a valid "supported
 *	rates" IE, i.e. CCK rates first, then OFDM.
 * @n_bitrates: Number of bitrates in @bitrates
Johannes Berg's avatar
Johannes Berg committed
249
 * @ht_cap: HT capabilities in this band
250
 * @vht_cap: VHT capabilities in this band
Johannes Berg's avatar
Johannes Berg committed
251 252 253 254 255 256 257 258
 */
struct ieee80211_supported_band {
	struct ieee80211_channel *channels;
	struct ieee80211_rate *bitrates;
	enum ieee80211_band band;
	int n_channels;
	int n_bitrates;
	struct ieee80211_sta_ht_cap ht_cap;
259
	struct ieee80211_sta_vht_cap vht_cap;
Johannes Berg's avatar
Johannes Berg committed
260
};
Andy Green's avatar
Andy Green committed
261

Johannes Berg's avatar
Johannes Berg committed
262 263 264
/*
 * Wireless hardware/device configuration structures and methods
 */
Andy Green's avatar
Andy Green committed
265

266 267 268 269 270 271 272 273 274 275 276 277 278 279 280
/**
 * DOC: Actions and configuration
 *
 * Each wireless device and each virtual interface offer a set of configuration
 * operations and other actions that are invoked by userspace. Each of these
 * actions is described in the operations structure, and the parameters these
 * operations use are described separately.
 *
 * Additionally, some operations are asynchronous and expect to get status
 * information via some functions that drivers need to call.
 *
 * Scanning and BSS list handling with its associated functionality is described
 * in a separate chapter.
 */

Johannes Berg's avatar
Johannes Berg committed
281 282
/**
 * struct vif_params - describes virtual interface parameters
283
 * @use_4addr: use 4-address frames
284 285 286
 * @macaddr: address to use for this virtual interface. This will only
 * 	be used for non-netdevice interfaces. If this parameter is set
 * 	to zero address the driver may determine the address as needed.
Johannes Berg's avatar
Johannes Berg committed
287 288
 */
struct vif_params {
289
       int use_4addr;
290
       u8 macaddr[ETH_ALEN];
Johannes Berg's avatar
Johannes Berg committed
291
};
Andy Green's avatar
Andy Green committed
292

Johannes Berg's avatar
Johannes Berg committed
293
/**
294 295 296 297 298 299 300 301 302 303
 * struct key_params - key information
 *
 * Information about a key
 *
 * @key: key material
 * @key_len: length of key material
 * @cipher: cipher suite selector
 * @seq: sequence counter (IV/PN) for TKIP and CCMP keys, only used
 *	with the get_key() callback, must be in little endian,
 *	length given by @seq_len.
Johannes Berg's avatar
Johannes Berg committed
304
 * @seq_len: length of @seq.
305 306 307 308 309 310 311 312 313
 */
struct key_params {
	u8 *key;
	u8 *seq;
	int key_len;
	int seq_len;
	u32 cipher;
};

314 315 316
/**
 * struct cfg80211_chan_def - channel definition
 * @chan: the (control) channel
317 318 319 320
 * @width: channel width
 * @center_freq1: center frequency of first segment
 * @center_freq2: center frequency of second segment
 *	(only with 80+80 MHz)
321 322 323
 */
struct cfg80211_chan_def {
	struct ieee80211_channel *chan;
324 325 326
	enum nl80211_chan_width width;
	u32 center_freq1;
	u32 center_freq2;
327 328
};

329 330 331 332
/**
 * cfg80211_get_chandef_type - return old channel type from chandef
 * @chandef: the channel definition
 *
333
 * Return: The old channel type (NOHT, HT20, HT40+/-) from a given
334 335
 * chandef, which must have a bandwidth allowing this conversion.
 */
336 337 338
static inline enum nl80211_channel_type
cfg80211_get_chandef_type(const struct cfg80211_chan_def *chandef)
{
339 340 341 342 343 344 345 346 347 348 349 350 351
	switch (chandef->width) {
	case NL80211_CHAN_WIDTH_20_NOHT:
		return NL80211_CHAN_NO_HT;
	case NL80211_CHAN_WIDTH_20:
		return NL80211_CHAN_HT20;
	case NL80211_CHAN_WIDTH_40:
		if (chandef->center_freq1 > chandef->chan->center_freq)
			return NL80211_CHAN_HT40PLUS;
		return NL80211_CHAN_HT40MINUS;
	default:
		WARN_ON(1);
		return NL80211_CHAN_NO_HT;
	}
352 353
}

354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370
/**
 * cfg80211_chandef_create - create channel definition using channel type
 * @chandef: the channel definition struct to fill
 * @channel: the control channel
 * @chantype: the channel type
 *
 * Given a channel type, create a channel definition.
 */
void cfg80211_chandef_create(struct cfg80211_chan_def *chandef,
			     struct ieee80211_channel *channel,
			     enum nl80211_channel_type chantype);

/**
 * cfg80211_chandef_identical - check if two channel definitions are identical
 * @chandef1: first channel definition
 * @chandef2: second channel definition
 *
371
 * Return: %true if the channels defined by the channel definitions are
372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388
 * identical, %false otherwise.
 */
static inline bool
cfg80211_chandef_identical(const struct cfg80211_chan_def *chandef1,
			   const struct cfg80211_chan_def *chandef2)
{
	return (chandef1->chan == chandef2->chan &&
		chandef1->width == chandef2->width &&
		chandef1->center_freq1 == chandef2->center_freq1 &&
		chandef1->center_freq2 == chandef2->center_freq2);
}

/**
 * cfg80211_chandef_compatible - check if two channel definitions are compatible
 * @chandef1: first channel definition
 * @chandef2: second channel definition
 *
389
 * Return: %NULL if the given channel definitions are incompatible,
390 391 392 393 394 395
 * chandef1 or chandef2 otherwise.
 */
const struct cfg80211_chan_def *
cfg80211_chandef_compatible(const struct cfg80211_chan_def *chandef1,
			    const struct cfg80211_chan_def *chandef2);

396 397 398
/**
 * cfg80211_chandef_valid - check if a channel definition is valid
 * @chandef: the channel definition to check
399
 * Return: %true if the channel definition is valid. %false otherwise.
400 401 402 403 404 405 406
 */
bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef);

/**
 * cfg80211_chandef_usable - check if secondary channels can be used
 * @wiphy: the wiphy to validate against
 * @chandef: the channel definition to check
407 408
 * @prohibited_flags: the regulatory channel flags that must not be set
 * Return: %true if secondary channels are usable. %false otherwise.
409 410 411 412 413
 */
bool cfg80211_chandef_usable(struct wiphy *wiphy,
			     const struct cfg80211_chan_def *chandef,
			     u32 prohibited_flags);

414 415 416
/**
 * enum survey_info_flags - survey information flags
 *
Johannes Berg's avatar
Johannes Berg committed
417
 * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in
418
 * @SURVEY_INFO_IN_USE: channel is currently being used
419 420 421 422 423
 * @SURVEY_INFO_CHANNEL_TIME: channel active time (in ms) was filled in
 * @SURVEY_INFO_CHANNEL_TIME_BUSY: channel busy time was filled in
 * @SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: extension channel busy time was filled in
 * @SURVEY_INFO_CHANNEL_TIME_RX: channel receive time was filled in
 * @SURVEY_INFO_CHANNEL_TIME_TX: channel transmit time was filled in
Johannes Berg's avatar
Johannes Berg committed
424
 *
425 426 427 428 429
 * Used by the driver to indicate which info in &struct survey_info
 * it has filled in during the get_survey().
 */
enum survey_info_flags {
	SURVEY_INFO_NOISE_DBM = 1<<0,
430
	SURVEY_INFO_IN_USE = 1<<1,
431 432 433 434 435
	SURVEY_INFO_CHANNEL_TIME = 1<<2,
	SURVEY_INFO_CHANNEL_TIME_BUSY = 1<<3,
	SURVEY_INFO_CHANNEL_TIME_EXT_BUSY = 1<<4,
	SURVEY_INFO_CHANNEL_TIME_RX = 1<<5,
	SURVEY_INFO_CHANNEL_TIME_TX = 1<<6,
436 437 438 439 440 441 442 443 444
};

/**
 * struct survey_info - channel survey response
 *
 * @channel: the channel this survey record reports, mandatory
 * @filled: bitflag of flags from &enum survey_info_flags
 * @noise: channel noise in dBm. This and all following fields are
 *     optional
445 446 447 448 449
 * @channel_time: amount of time in ms the radio spent on the channel
 * @channel_time_busy: amount of time the primary channel was sensed busy
 * @channel_time_ext_busy: amount of time the extension channel was sensed busy
 * @channel_time_rx: amount of time the radio spent receiving data
 * @channel_time_tx: amount of time the radio spent transmitting data
450
 *
Johannes Berg's avatar
Johannes Berg committed
451 452
 * Used by dump_survey() to report back per-channel survey information.
 *
453 454 455 456 457
 * This structure can later be expanded with things like
 * channel duty cycle etc.
 */
struct survey_info {
	struct ieee80211_channel *channel;
458 459 460 461 462
	u64 channel_time;
	u64 channel_time_busy;
	u64 channel_time_ext_busy;
	u64 channel_time_rx;
	u64 channel_time_tx;
463 464 465 466
	u32 filled;
	s8 noise;
};

467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496
/**
 * struct cfg80211_crypto_settings - Crypto settings
 * @wpa_versions: indicates which, if any, WPA versions are enabled
 *	(from enum nl80211_wpa_versions)
 * @cipher_group: group key cipher suite (or 0 if unset)
 * @n_ciphers_pairwise: number of AP supported unicast ciphers
 * @ciphers_pairwise: unicast key cipher suites
 * @n_akm_suites: number of AKM suites
 * @akm_suites: AKM suites
 * @control_port: Whether user space controls IEEE 802.1X port, i.e.,
 *	sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
 *	required to assume that the port is unauthorized until authorized by
 *	user space. Otherwise, port is marked authorized by default.
 * @control_port_ethertype: the control port protocol that should be
 *	allowed through even on unauthorized ports
 * @control_port_no_encrypt: TRUE to prevent encryption of control port
 *	protocol frames.
 */
struct cfg80211_crypto_settings {
	u32 wpa_versions;
	u32 cipher_group;
	int n_ciphers_pairwise;
	u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES];
	int n_akm_suites;
	u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
	bool control_port;
	__be16 control_port_ethertype;
	bool control_port_no_encrypt;
};

497
/**
498
 * struct cfg80211_beacon_data - beacon data
499 500 501 502 503 504
 * @head: head portion of beacon (before TIM IE)
 *     or %NULL if not changed
 * @tail: tail portion of beacon (after TIM IE)
 *     or %NULL if not changed
 * @head_len: length of @head
 * @tail_len: length of @tail
505 506 507 508 509 510 511 512
 * @beacon_ies: extra information element(s) to add into Beacon frames or %NULL
 * @beacon_ies_len: length of beacon_ies in octets
 * @proberesp_ies: extra information element(s) to add into Probe Response
 *	frames or %NULL
 * @proberesp_ies_len: length of proberesp_ies in octets
 * @assocresp_ies: extra information element(s) to add into (Re)Association
 *	Response frames or %NULL
 * @assocresp_ies_len: length of assocresp_ies in octets
513 514
 * @probe_resp_len: length of probe response template (@probe_resp)
 * @probe_resp: probe response template (AP mode only)
515
 */
516 517 518 519 520 521 522 523 524 525 526 527 528 529
struct cfg80211_beacon_data {
	const u8 *head, *tail;
	const u8 *beacon_ies;
	const u8 *proberesp_ies;
	const u8 *assocresp_ies;
	const u8 *probe_resp;

	size_t head_len, tail_len;
	size_t beacon_ies_len;
	size_t proberesp_ies_len;
	size_t assocresp_ies_len;
	size_t probe_resp_len;
};

530 531 532 533
struct mac_address {
	u8 addr[ETH_ALEN];
};

534 535 536 537 538
/**
 * struct cfg80211_ap_settings - AP configuration
 *
 * Used to configure an AP interface.
 *
539
 * @chandef: defines the channel to use
540 541 542 543 544 545 546 547 548 549
 * @beacon: beacon data
 * @beacon_interval: beacon interval
 * @dtim_period: DTIM period
 * @ssid: SSID to be used in the BSS (note: may be %NULL if not provided from
 *	user space)
 * @ssid_len: length of @ssid
 * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames
 * @crypto: crypto settings
 * @privacy: the BSS uses privacy
 * @auth_type: Authentication type (algorithm)
550
 * @inactivity_timeout: time in seconds to determine station's inactivity.
551 552
 * @p2p_ctwindow: P2P CT Window
 * @p2p_opp_ps: P2P opportunistic PS
553 554
 */
struct cfg80211_ap_settings {
555
	struct cfg80211_chan_def chandef;
556

557 558 559
	struct cfg80211_beacon_data beacon;

	int beacon_interval, dtim_period;
560 561 562
	const u8 *ssid;
	size_t ssid_len;
	enum nl80211_hidden_ssid hidden_ssid;
563 564 565
	struct cfg80211_crypto_settings crypto;
	bool privacy;
	enum nl80211_auth_type auth_type;
566
	int inactivity_timeout;
567 568
	u8 p2p_ctwindow;
	bool p2p_opp_ps;
569 570
};

571 572 573 574 575
/**
 * enum plink_action - actions to perform in mesh peers
 *
 * @PLINK_ACTION_INVALID: action 0 is reserved
 * @PLINK_ACTION_OPEN: start mesh peer link establishment
Johannes Berg's avatar
Johannes Berg committed
576
 * @PLINK_ACTION_BLOCK: block traffic from this mesh peer
577 578 579 580 581 582 583
 */
enum plink_actions {
	PLINK_ACTION_INVALID,
	PLINK_ACTION_OPEN,
	PLINK_ACTION_BLOCK,
};

584 585 586 587 588 589 590 591 592 593 594
/**
 * enum station_parameters_apply_mask - station parameter values to apply
 * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
 *
 * Not all station parameters have in-band "no change" signalling,
 * for those that don't these flags will are used.
 */
enum station_parameters_apply_mask {
	STATION_PARAM_APPLY_UAPSD = BIT(0),
};

595 596 597 598 599 600 601 602 603
/**
 * struct station_parameters - station parameters
 *
 * Used to change and create a new station.
 *
 * @vlan: vlan interface station should belong to
 * @supported_rates: supported rates in IEEE 802.11 format
 *	(or NULL for no change)
 * @supported_rates_len: number of supported rates
604 605 606 607
 * @sta_flags_mask: station flags that changed
 *	(bitmask of BIT(NL80211_STA_FLAG_...))
 * @sta_flags_set: station flags values
 *	(bitmask of BIT(NL80211_STA_FLAG_...))
608 609
 * @listen_interval: listen interval or -1 for no change
 * @aid: AID or zero for no change
Johannes Berg's avatar
Johannes Berg committed
610
 * @plink_action: plink action to take
611
 * @plink_state: set the peer link state for a station
Johannes Berg's avatar
Johannes Berg committed
612
 * @ht_capa: HT capabilities of station
613
 * @vht_capa: VHT capabilities of station
614 615 616 617
 * @uapsd_queues: bitmap of queues configured for uapsd. same format
 *	as the AC bitmap in the QoS info field
 * @max_sp: max Service Period. same format as the MAX_SP in the
 *	QoS info field (but already shifted down)
618 619 620
 * @sta_modify_mask: bitmap indicating which parameters changed
 *	(for those that don't have a natural "no change" value),
 *	see &enum station_parameters_apply_mask
621 622
 * @local_pm: local link-specific mesh power save mode (no change when set
 *	to unknown)
623 624 625 626
 */
struct station_parameters {
	u8 *supported_rates;
	struct net_device *vlan;
627
	u32 sta_flags_mask, sta_flags_set;
628
	u32 sta_modify_mask;
629 630 631
	int listen_interval;
	u16 aid;
	u8 supported_rates_len;
632
	u8 plink_action;
633
	u8 plink_state;
634
	struct ieee80211_ht_cap *ht_capa;
635
	struct ieee80211_vht_cap *vht_capa;
636 637
	u8 uapsd_queues;
	u8 max_sp;
638
	enum nl80211_mesh_power_mode local_pm;
639 640
};

641
/**
642
 * enum station_info_flags - station information flags
643
 *
644 645
 * Used by the driver to indicate which info in &struct station_info
 * it has filled in during get_station() or dump_station().
646
 *
647 648 649 650 651 652
 * @STATION_INFO_INACTIVE_TIME: @inactive_time filled
 * @STATION_INFO_RX_BYTES: @rx_bytes filled
 * @STATION_INFO_TX_BYTES: @tx_bytes filled
 * @STATION_INFO_LLID: @llid filled
 * @STATION_INFO_PLID: @plid filled
 * @STATION_INFO_PLINK_STATE: @plink_state filled
653
 * @STATION_INFO_SIGNAL: @signal filled
654
 * @STATION_INFO_TX_BITRATE: @txrate fields are filled
655
 *  (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
656 657
 * @STATION_INFO_RX_PACKETS: @rx_packets filled
 * @STATION_INFO_TX_PACKETS: @tx_packets filled
658 659
 * @STATION_INFO_TX_RETRIES: @tx_retries filled
 * @STATION_INFO_TX_FAILED: @tx_failed filled
660
 * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
661
 * @STATION_INFO_SIGNAL_AVG: @signal_avg filled
662
 * @STATION_INFO_RX_BITRATE: @rxrate fields are filled
663
 * @STATION_INFO_BSS_PARAM: @bss_param filled
664
 * @STATION_INFO_CONNECTED_TIME: @connected_time filled
665
 * @STATION_INFO_ASSOC_REQ_IES: @assoc_req_ies filled
666
 * @STATION_INFO_STA_FLAGS: @sta_flags filled
667
 * @STATION_INFO_BEACON_LOSS_COUNT: @beacon_loss_count filled
668
 * @STATION_INFO_T_OFFSET: @t_offset filled
669 670 671
 * @STATION_INFO_LOCAL_PM: @local_pm filled
 * @STATION_INFO_PEER_PM: @peer_pm filled
 * @STATION_INFO_NONPEER_PM: @nonpeer_pm filled
672
 */
673 674 675 676 677 678 679
enum station_info_flags {
	STATION_INFO_INACTIVE_TIME	= 1<<0,
	STATION_INFO_RX_BYTES		= 1<<1,
	STATION_INFO_TX_BYTES		= 1<<2,
	STATION_INFO_LLID		= 1<<3,
	STATION_INFO_PLID		= 1<<4,
	STATION_INFO_PLINK_STATE	= 1<<5,
680 681
	STATION_INFO_SIGNAL		= 1<<6,
	STATION_INFO_TX_BITRATE		= 1<<7,
682 683
	STATION_INFO_RX_PACKETS		= 1<<8,
	STATION_INFO_TX_PACKETS		= 1<<9,
684 685
	STATION_INFO_TX_RETRIES		= 1<<10,
	STATION_INFO_TX_FAILED		= 1<<11,
686
	STATION_INFO_RX_DROP_MISC	= 1<<12,
687
	STATION_INFO_SIGNAL_AVG		= 1<<13,
688
	STATION_INFO_RX_BITRATE		= 1<<14,
689
	STATION_INFO_BSS_PARAM          = 1<<15,
690
	STATION_INFO_CONNECTED_TIME	= 1<<16,
691
	STATION_INFO_ASSOC_REQ_IES	= 1<<17,
692
	STATION_INFO_STA_FLAGS		= 1<<18,
693 694
	STATION_INFO_BEACON_LOSS_COUNT	= 1<<19,
	STATION_INFO_T_OFFSET		= 1<<20,
695 696 697
	STATION_INFO_LOCAL_PM		= 1<<21,
	STATION_INFO_PEER_PM		= 1<<22,
	STATION_INFO_NONPEER_PM		= 1<<23,
698 699 700 701 702 703 704 705
};

/**
 * enum station_info_rate_flags - bitrate info flags
 *
 * Used by the driver to indicate the specific rate transmission
 * type for 802.11n transmissions.
 *
706 707 708 709 710 711
 * @RATE_INFO_FLAGS_MCS: mcs field filled with HT MCS
 * @RATE_INFO_FLAGS_VHT_MCS: mcs field filled with VHT MCS
 * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 MHz width transmission
 * @RATE_INFO_FLAGS_80_MHZ_WIDTH: 80 MHz width transmission
 * @RATE_INFO_FLAGS_80P80_MHZ_WIDTH: 80+80 MHz width transmission
 * @RATE_INFO_FLAGS_160_MHZ_WIDTH: 160 MHz width transmission
712
 * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
713
 * @RATE_INFO_FLAGS_60G: 60GHz MCS
714 715
 */
enum rate_info_flags {
716 717 718 719 720 721 722 723
	RATE_INFO_FLAGS_MCS			= BIT(0),
	RATE_INFO_FLAGS_VHT_MCS			= BIT(1),
	RATE_INFO_FLAGS_40_MHZ_WIDTH		= BIT(2),
	RATE_INFO_FLAGS_80_MHZ_WIDTH		= BIT(3),
	RATE_INFO_FLAGS_80P80_MHZ_WIDTH		= BIT(4),
	RATE_INFO_FLAGS_160_MHZ_WIDTH		= BIT(5),
	RATE_INFO_FLAGS_SHORT_GI		= BIT(6),
	RATE_INFO_FLAGS_60G			= BIT(7),
724 725 726 727 728 729 730 731 732 733
};

/**
 * struct rate_info - bitrate information
 *
 * Information about a receiving or transmitting bitrate
 *
 * @flags: bitflag of flags from &enum rate_info_flags
 * @mcs: mcs index if struct describes a 802.11n bitrate
 * @legacy: bitrate in 100kbit/s for 802.11abg
734
 * @nss: number of streams (VHT only)
735 736 737 738 739
 */
struct rate_info {
	u8 flags;
	u8 mcs;
	u16 legacy;
740
	u8 nss;
741 742
};

743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773
/**
 * enum station_info_rate_flags - bitrate info flags
 *
 * Used by the driver to indicate the specific rate transmission
 * type for 802.11n transmissions.
 *
 * @BSS_PARAM_FLAGS_CTS_PROT: whether CTS protection is enabled
 * @BSS_PARAM_FLAGS_SHORT_PREAMBLE: whether short preamble is enabled
 * @BSS_PARAM_FLAGS_SHORT_SLOT_TIME: whether short slot time is enabled
 */
enum bss_param_flags {
	BSS_PARAM_FLAGS_CTS_PROT	= 1<<0,
	BSS_PARAM_FLAGS_SHORT_PREAMBLE	= 1<<1,
	BSS_PARAM_FLAGS_SHORT_SLOT_TIME	= 1<<2,
};

/**
 * struct sta_bss_parameters - BSS parameters for the attached station
 *
 * Information about the currently associated BSS
 *
 * @flags: bitflag of flags from &enum bss_param_flags
 * @dtim_period: DTIM period for the BSS
 * @beacon_interval: beacon interval
 */
struct sta_bss_parameters {
	u8 flags;
	u8 dtim_period;
	u16 beacon_interval;
};

774
/**
775
 * struct station_info - station information
776
 *
777
 * Station information filled by driver for get_station() and dump_station.
778
 *
779
 * @filled: bitflag of flags from &enum station_info_flags
780
 * @connected_time: time(in secs) since a station is last connected
781 782 783
 * @inactive_time: time since last station activity (tx/rx) in milliseconds
 * @rx_bytes: bytes received from this station
 * @tx_bytes: bytes transmitted to this station
784 785 786
 * @llid: mesh local link id
 * @plid: mesh peer link id
 * @plink_state: mesh peer link state
787 788 789 790
 * @signal: The signal strength, type depends on the wiphy's signal_type.
 *	For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
 * @signal_avg: Average signal strength, type depends on the wiphy's signal_type.
 *	For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
791 792
 * @txrate: current unicast bitrate from this station
 * @rxrate: current unicast bitrate to this station
793 794
 * @rx_packets: packets received from this station
 * @tx_packets: packets transmitted to this station
795 796
 * @tx_retries: cumulative retry counts
 * @tx_failed: number of failed transmissions (retries exceeded, no ACK)
797
 * @rx_dropped_misc:  Dropped for un-specified reason.
798
 * @bss_param: current BSS parameters
799 800 801 802
 * @generation: generation number for nl80211 dumps.
 *	This number should increase every time the list of stations
 *	changes, i.e. when a station is added or removed, so that
 *	userspace can tell whether it got a consistent snapshot.
803 804 805 806 807
 * @assoc_req_ies: IEs from (Re)Association Request.
 *	This is used only when in AP mode with drivers that do not use
 *	user space MLME/SME implementation. The information is provided for
 *	the cfg80211_new_sta() calls to notify user space of the IEs.
 * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets.
808
 * @sta_flags: station flags mask & values
809
 * @beacon_loss_count: Number of times beacon loss event has triggered.
810
 * @t_offset: Time offset of the station relative to this host.
811 812 813
 * @local_pm: local mesh STA power save mode
 * @peer_pm: peer mesh STA power save mode
 * @nonpeer_pm: non-peer mesh STA power save mode
814
 */
815
struct station_info {
816
	u32 filled;
817
	u32 connected_time;
818 819 820
	u32 inactive_time;
	u32 rx_bytes;
	u32 tx_bytes;
821 822 823
	u16 llid;
	u16 plid;
	u8 plink_state;
824
	s8 signal;
825
	s8 signal_avg;
826
	struct rate_info txrate;
827
	struct rate_info rxrate;
828 829
	u32 rx_packets;
	u32 tx_packets;
830 831
	u32 tx_retries;
	u32 tx_failed;
832
	u32 rx_dropped_misc;
833
	struct sta_bss_parameters bss_param;
834
	struct nl80211_sta_flag_update sta_flags;
835 836

	int generation;
837 838 839

	const u8 *assoc_req_ies;
	size_t assoc_req_ies_len;
840

841
	u32 beacon_loss_count;
842
	s64 t_offset;
843 844 845
	enum nl80211_mesh_power_mode local_pm;
	enum nl80211_mesh_power_mode peer_pm;
	enum nl80211_mesh_power_mode nonpeer_pm;
846

847 848 849 850
	/*
	 * Note: Add a new enum station_info_flags value for each new field and
	 * use it to check which fields are initialized.
	 */
851 852
};

853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872
/**
 * enum monitor_flags - monitor flags
 *
 * Monitor interface configuration flags. Note that these must be the bits
 * according to the nl80211 flags.
 *
 * @MONITOR_FLAG_FCSFAIL: pass frames with bad FCS
 * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP
 * @MONITOR_FLAG_CONTROL: pass control frames
 * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering
 * @MONITOR_FLAG_COOK_FRAMES: report frames after processing
 */
enum monitor_flags {
	MONITOR_FLAG_FCSFAIL		= 1<<NL80211_MNTR_FLAG_FCSFAIL,
	MONITOR_FLAG_PLCPFAIL		= 1<<NL80211_MNTR_FLAG_PLCPFAIL,
	MONITOR_FLAG_CONTROL		= 1<<NL80211_MNTR_FLAG_CONTROL,
	MONITOR_FLAG_OTHER_BSS		= 1<<NL80211_MNTR_FLAG_OTHER_BSS,
	MONITOR_FLAG_COOK_FRAMES	= 1<<NL80211_MNTR_FLAG_COOK_FRAMES,
};

873 874 875 876 877 878
/**
 * enum mpath_info_flags -  mesh path information flags
 *
 * Used by the driver to indicate which info in &struct mpath_info it has filled
 * in during get_station() or dump_station().
 *
Johannes Berg's avatar
Johannes Berg committed
879 880 881 882 883 884 885
 * @MPATH_INFO_FRAME_QLEN: @frame_qlen filled
 * @MPATH_INFO_SN: @sn filled
 * @MPATH_INFO_METRIC: @metric filled
 * @MPATH_INFO_EXPTIME: @exptime filled
 * @MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled
 * @MPATH_INFO_DISCOVERY_RETRIES: @discovery_retries filled
 * @MPATH_INFO_FLAGS: @flags filled
886 887 888
 */
enum mpath_info_flags {
	MPATH_INFO_FRAME_QLEN		= BIT(0),
889
	MPATH_INFO_SN			= BIT(1),
890 891 892 893 894 895 896 897 898 899 900 901 902 903
	MPATH_INFO_METRIC		= BIT(2),
	MPATH_INFO_EXPTIME		= BIT(3),
	MPATH_INFO_DISCOVERY_TIMEOUT	= BIT(4),
	MPATH_INFO_DISCOVERY_RETRIES	= BIT(5),
	MPATH_INFO_FLAGS		= BIT(6),
};

/**
 * struct mpath_info - mesh path information
 *
 * Mesh path information filled by driver for get_mpath() and dump_mpath().
 *
 * @filled: bitfield of flags from &enum mpath_info_flags
 * @frame_qlen: number of queued frames for this destination
904
 * @sn: target sequence number
905 906 907 908 909
 * @metric: metric (cost) of this mesh path
 * @exptime: expiration time for the mesh path from now, in msecs
 * @flags: mesh path flags
 * @discovery_timeout: total mesh path discovery timeout, in msecs
 * @discovery_retries: mesh path discovery retries
910 911 912 913
 * @generation: generation number for nl80211 dumps.
 *	This number should increase every time the list of mesh paths
 *	changes, i.e. when a station is added or removed, so that
 *	userspace can tell whether it got a consistent snapshot.
914 915 916 917
 */
struct mpath_info {
	u32 filled;
	u32 frame_qlen;
918
	u32 sn;
919 920 921 922 923
	u32 metric;
	u32 exptime;
	u32 discovery_timeout;
	u8 discovery_retries;
	u8 flags;
924 925

	int generation;
926 927
};

928 929 930 931 932 933 934 935 936 937 938
/**
 * struct bss_parameters - BSS parameters
 *
 * Used to change BSS parameters (mainly for AP mode).
 *
 * @use_cts_prot: Whether to use CTS protection
 *	(0 = no, 1 = yes, -1 = do not change)
 * @use_short_preamble: Whether the use of short preambles is allowed
 *	(0 = no, 1 = yes, -1 = do not change)
 * @use_short_slot_time: Whether the use of short slot time is allowed
 *	(0 = no, 1 = yes, -1 = do not change)
939 940 941
 * @basic_rates: basic rates in IEEE 802.11 format
 *	(or NULL for no change)
 * @basic_rates_len: number of basic rates
942
 * @ap_isolate: do not forward packets between connected stations
943 944
 * @ht_opmode: HT Operation mode
 * 	(u16 = opmode, -1 = do not change)
945 946
 * @p2p_ctwindow: P2P CT Window (-1 = no change)
 * @p2p_opp_ps: P2P opportunistic PS (-1 = no change)
947 948 949 950 951
 */
struct bss_parameters {
	int use_cts_prot;
	int use_short_preamble;
	int use_short_slot_time;
952 953
	u8 *basic_rates;
	u8 basic_rates_len;
954
	int ap_isolate;
955
	int ht_opmode;
956
	s8 p2p_ctwindow, p2p_opp_ps;
957
};
958

959
/**
960 961 962
 * struct mesh_config - 802.11s mesh configuration
 *
 * These parameters can be changed while the mesh is active.
963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010
 *
 * @dot11MeshRetryTimeout: the initial retry timeout in millisecond units used
 *	by the Mesh Peering Open message
 * @dot11MeshConfirmTimeout: the initial retry timeout in millisecond units
 *	used by the Mesh Peering Open message
 * @dot11MeshHoldingTimeout: the confirm timeout in millisecond units used by
 *	the mesh peering management to close a mesh peering
 * @dot11MeshMaxPeerLinks: the maximum number of peer links allowed on this
 *	mesh interface
 * @dot11MeshMaxRetries: the maximum number of peer link open retries that can
 *	be sent to establish a new peer link instance in a mesh
 * @dot11MeshTTL: the value of TTL field set at a source mesh STA
 * @element_ttl: the value of TTL field set at a mesh STA for path selection
 *	elements
 * @auto_open_plinks: whether we should automatically open peer links when we
 *	detect compatible mesh peers
 * @dot11MeshNbrOffsetMaxNeighbor: the maximum number of neighbors to
 *	synchronize to for 11s default synchronization method
 * @dot11MeshHWMPmaxPREQretries: the number of action frames containing a PREQ
 *	that an originator mesh STA can send to a particular path target
 * @path_refresh_time: how frequently to refresh mesh paths in milliseconds
 * @min_discovery_timeout: the minimum length of time to wait until giving up on
 *	a path discovery in milliseconds
 * @dot11MeshHWMPactivePathTimeout: the time (in TUs) for which mesh STAs
 *	receiving a PREQ shall consider the forwarding information from the
 *	root to be valid. (TU = time unit)
 * @dot11MeshHWMPpreqMinInterval: the minimum interval of time (in TUs) during
 *	which a mesh STA can send only one action frame containing a PREQ
 *	element
 * @dot11MeshHWMPperrMinInterval: the minimum interval of time (in TUs) during
 *	which a mesh STA can send only one Action frame containing a PERR
 *	element
 * @dot11MeshHWMPnetDiameterTraversalTime: the interval of time (in TUs) that
 *	it takes for an HWMP information element to propagate across the mesh
 * @dot11MeshHWMPRootMode: the configuration of a mesh STA as root mesh STA
 * @dot11MeshHWMPRannInterval: the interval of time (in TUs) between root
 *	announcements are transmitted
 * @dot11MeshGateAnnouncementProtocol: whether to advertise that this mesh
 *	station has access to a broader network beyond the MBSS. (This is
 *	missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol set to true
 *	only means that the station will announce others it's a mesh gate, but
 *	not necessarily using the gate announcement protocol. Still keeping the
 *	same nomenclature to be in sync with the spec)
 * @dot11MeshForwarding: whether the Mesh STA is forwarding or non-forwarding
 *	entity (default is TRUE - forwarding entity)
 * @rssi_threshold: the threshold for average signal strength of candidate
 *	station to establish a peer link
 * @ht_opmode: mesh HT protection mode
1011 1012 1013 1014 1015 1016 1017
 *
 * @dot11MeshHWMPactivePathToRootTimeout: The time (in TUs) for which mesh STAs
 *	receiving a proactive PREQ shall consider the forwarding information to
 *	the root mesh STA to be valid.
 *
 * @dot11MeshHWMProotInterval: The interval of time (in TUs) between proactive
 *	PREQs are transmitted.
1018 1019 1020
 * @dot11MeshHWMPconfirmationInterval: The minimum interval of time (in TUs)
 *	during which a mesh STA can send only one Action frame containing
 *	a PREQ element for root path confirmation.
1021 1022 1023 1024
 * @power_mode: The default mesh power save mode which will be the initial
 *	setting for new peer links.
 * @dot11MeshAwakeWindowDuration: The duration in TUs the STA will remain awake
 *	after transmitting its beacon.
1025
 */
1026 1027 1028 1029 1030
struct mesh_config {
	u16 dot11MeshRetryTimeout;
	u16 dot11MeshConfirmTimeout;
	u16 dot11MeshHoldingTimeout;
	u16 dot11MeshMaxPeerLinks;
1031 1032 1033
	u8 dot11MeshMaxRetries;
	u8 dot11MeshTTL;
	u8 element_ttl;
1034
	bool auto_open_plinks;
1035
	u32 dot11MeshNbrOffsetMaxNeighbor;
1036
	u8 dot11MeshHWMPmaxPREQretries;
1037 1038 1039 1040
	u32 path_refresh_time;
	u16 min_discovery_timeout;
	u32 dot11MeshHWMPactivePathTimeout;
	u16 dot11MeshHWMPpreqMinInterval;
1041
	u16 dot11MeshHWMPperrMinInterval;
1042
	u16 dot11MeshHWMPnetDiameterTraversalTime;
1043
	u8 dot11MeshHWMPRootMode;
1044
	u16 dot11MeshHWMPRannInterval;
1045
	bool dot11MeshGateAnnouncementProtocol;
1046
	bool dot11MeshForwarding;
1047
	s32 rssi_threshold;
1048
	u16 ht_opmode;
1049 1050
	u32 dot11MeshHWMPactivePathToRootTimeout;
	u16 dot11MeshHWMProotInterval;
1051
	u16 dot11MeshHWMPconfirmationInterval;
1052 1053
	enum nl80211_mesh_power_mode power_mode;
	u16 dot11MeshAwakeWindowDuration;
1054 1055
};

1056 1057
/**
 * struct mesh_setup - 802.11s mesh setup configuration
1058
 * @chandef: defines the channel to use
1059 1060
 * @mesh_id: the mesh ID
 * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes
1061
 * @sync_method: which synchronization method to use
1062 1063
 * @path_sel_proto: which path selection protocol to use
 * @path_metric: which metric to use
1064 1065
 * @ie: vendor information elements (optional)
 * @ie_len: length of vendor information elements
1066 1067
 * @is_authenticated: this mesh requires authentication
 * @is_secure: this mesh uses security
1068 1069
 * @dtim_period: DTIM period to use
 * @beacon_interval: beacon interval to use
1070
 * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a]
1071 1072 1073 1074
 *
 * These parameters are fixed when the mesh is created.
 */
struct mesh_setup {
1075
	struct cfg80211_chan_def chandef;
1076 1077
	const u8 *mesh_id;
	u8 mesh_id_len;
1078 1079 1080
	u8 sync_method;
	u8 path_sel_proto;
	u8 path_metric;
1081 1082
	const u8 *ie;
	u8 ie_len;
1083
	bool is_authenticated;
1084
	bool is_secure;
1085 1086
	u8 dtim_period;
	u16 beacon_interval;
1087
	int mcast_rate[IEEE80211_NUM_BANDS];
1088 1089
};

1090 1091
/**
 * struct ieee80211_txq_params - TX queue parameters
1092
 * @ac: AC identifier
1093 1094 1095 1096 1097 1098 1099 1100
 * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
 * @cwmin: Minimum contention window [a value of the form 2^n-1 in the range
 *	1..32767]
 * @cwmax: Maximum contention window [a value of the form 2^n-1 in the range
 *	1..32767]
 * @aifs: Arbitration interframe space [0..255]
 */
struct ieee80211_txq_params {
1101
	enum nl80211_ac ac;
1102 1103 1104 1105 1106 1107
	u16 txop;
	u16 cwmin;
	u16 cwmax;
	u8 aifs;
};

1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129
/**
 * DOC: Scanning and BSS list handling
 *
 * The scanning process itself is fairly simple, but cfg80211 offers quite
 * a bit of helper functionality. To start a scan, the scan operation will
 * be invoked with a scan definition. This scan definition contains the
 * channels to scan, and the SSIDs to send probe requests for (including the
 * wildcard, if desired). A passive scan is indicated by having no SSIDs to
 * probe. Additionally, a scan request may contain extra information elements
 * that should be added to the probe request. The IEs are guaranteed to be
 * well-formed, and will not exceed the maximum length the driver advertised
 * in the wiphy structure.
 *
 * When scanning finds a BSS, cfg80211 needs to be notified of that, because
 * it is responsible for maintaining the BSS list; the driver should not
 * maintain a list itself. For this notification, various functions exist.
 *
 * Since drivers do not maintain a BSS list, there are also a number of
 * functions to search for a BSS and obtain information about it from the
 * BSS structure cfg80211 maintains. The BSS list is also made available
 * to userspace.
 */
1130

1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146
/**
 * struct cfg80211_ssid - SSID description
 * @ssid: the SSID
 * @ssid_len: length of the ssid
 */
struct cfg80211_ssid {
	u8 ssid[IEEE80211_MAX_SSID_LEN];
	u8 ssid_len;
};

/**
 * struct cfg80211_scan_request - scan request description
 *
 * @ssids: SSIDs to scan for (active scan only)
 * @n_ssids: number of SSIDs
 * @channels: channels to scan on.
1147
 * @n_channels: total number of channels to scan
1148 1149
 * @ie: optional information element(s) to add into Probe Request or %NULL
 * @ie_len: length of ie in octets
1150
 * @flags: bit field of flags controlling operation
1151
 * @rates: bitmap of rates to advertise for each band
1152
 * @wiphy: the wiphy this was for
1153
 * @scan_start: time (in jiffies) when the scan started
Johannes Berg's avatar
Johannes Berg committed
1154
 * @wdev: the wireless device to scan for
Johannes Berg's avatar
Johannes Berg committed
1155
 * @aborted: (internal) scan request was notified as aborted
1156
 * @no_cck: used to send probe requests at non CCK rate in 2GHz band
1157 1158 1159 1160 1161
 */
struct cfg80211_scan_request {
	struct cfg80211_ssid *ssids;
	int n_ssids;
	u32 n_channels;
1162
	const u8 *ie;
1163
	size_t ie_len;
1164
	u32 flags;
1165

1166 1167
	u32 rates[IEEE80211_NUM_BANDS];

Johannes Berg's avatar
Johannes Berg committed
1168 1169
	struct wireless_dev *wdev;

1170 1171
	/* internal */
	struct wiphy *wiphy;
1172
	unsigned long scan_start;
Johannes Berg's avatar
Johannes Berg committed
1173
	bool aborted;
1174
	bool no_cck;
1175 1176 1177

	/* keep last */
	struct ieee80211_channel *channels[0];
1178 1179
};

1180 1181 1182 1183 1184 1185 1186 1187 1188
/**
 * struct cfg80211_match_set - sets of attributes to match
 *
 * @ssid: SSID to be matched
 */
struct cfg80211_match_set {
	struct cfg80211_ssid ssid;
};

1189 1190 1191 1192 1193 1194
/**
 * struct cfg80211_sched_scan_request - scheduled scan request description
 *
 * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
 * @n_ssids: number of SSIDs
 * @n_channels: total number of channels to scan
1195
 * @interval: interval between each scheduled scan cycle
1196 1197
 * @ie: optional information element(s) to add into Probe Request or %NULL
 * @ie_len: length of ie in octets
1198
 * @flags: bit field of flags controlling operation
1199 1200 1201 1202 1203
 * @match_sets: sets of parameters to be matched for a scan result
 * 	entry to be considered valid and to be passed to the host
 * 	(others are filtered out).
 *	If ommited, all results are passed.
 * @n_match_sets: number of match sets
1204 1205 1206
 * @wiphy: the wiphy this was for
 * @dev: the interface
 * @channels: channels to scan
1207
 * @rssi_thold: don't report scan results below this threshold (in s32 dBm)
1208 1209 1210 1211 1212
 */
struct cfg80211_sched_scan_request {
	struct cfg80211_ssid *ssids;
	int n_ssids;
	u32 n_channels;
1213
	u32 interval;
1214 1215
	const u8 *ie;
	size_t ie_len;
1216
	u32 flags;
1217 1218
	struct cfg80211_match_set *match_sets;
	int n_match_sets;
1219
	s32 rssi_thold;
Luciano Coelho's avatar