setup-pci.c 21 KB
Newer Older
Linus Torvalds's avatar
Linus Torvalds committed
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
/*
 *  linux/drivers/ide/setup-pci.c		Version 1.10	2002/08/19
 *
 *  Copyright (c) 1998-2000  Andre Hedrick <andre@linux-ide.org>
 *
 *  Copyright (c) 1995-1998  Mark Lord
 *  May be copied or modified under the terms of the GNU General Public License
 */

#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/ide.h>
#include <linux/dma-mapping.h>

#include <asm/io.h>
#include <asm/irq.h>


/**
 *	ide_match_hwif	-	match a PCI IDE against an ide_hwif
 *	@io_base: I/O base of device
 *	@bootable: set if its bootable
 *	@name: name of device
 *
 *	Match a PCI IDE port against an entry in ide_hwifs[],
 *	based on io_base port if possible. Return the matching hwif,
 *	or a new hwif. If we find an error (clashing, out of devices, etc)
 *	return NULL
 *
 *	FIXME: we need to handle mmio matches here too
 */

static ide_hwif_t *ide_match_hwif(unsigned long io_base, u8 bootable, const char *name)
{
	int h;
	ide_hwif_t *hwif;

	/*
	 * Look for a hwif with matching io_base specified using
	 * parameters to ide_setup().
	 */
	for (h = 0; h < MAX_HWIFS; ++h) {
		hwif = &ide_hwifs[h];
		if (hwif->io_ports[IDE_DATA_OFFSET] == io_base) {
			if (hwif->chipset == ide_forced)
				return hwif; /* a perfect match */
		}
	}
	/*
	 * Look for a hwif with matching io_base default value.
	 * If chipset is "ide_unknown", then claim that hwif slot.
	 * Otherwise, some other chipset has already claimed it..  :(
	 */
	for (h = 0; h < MAX_HWIFS; ++h) {
		hwif = &ide_hwifs[h];
		if (hwif->io_ports[IDE_DATA_OFFSET] == io_base) {
			if (hwif->chipset == ide_unknown)
				return hwif; /* match */
			printk(KERN_ERR "%s: port 0x%04lx already claimed by %s\n",
				name, io_base, hwif->name);
			return NULL;	/* already claimed */
		}
	}
	/*
	 * Okay, there is no hwif matching our io_base,
	 * so we'll just claim an unassigned slot.
	 * Give preference to claiming other slots before claiming ide0/ide1,
	 * just in case there's another interface yet-to-be-scanned
	 * which uses ports 1f0/170 (the ide0/ide1 defaults).
	 *
	 * Unless there is a bootable card that does not use the standard
	 * ports 1f0/170 (the ide0/ide1 defaults). The (bootable) flag.
	 */
	if (bootable) {
		for (h = 0; h < MAX_HWIFS; ++h) {
			hwif = &ide_hwifs[h];
			if (hwif->chipset == ide_unknown)
				return hwif;	/* pick an unused entry */
		}
	} else {
		for (h = 2; h < MAX_HWIFS; ++h) {
			hwif = ide_hwifs + h;
			if (hwif->chipset == ide_unknown)
				return hwif;	/* pick an unused entry */
		}
	}
93
	for (h = 0; h < 2 && h < MAX_HWIFS; ++h) {
Linus Torvalds's avatar
Linus Torvalds committed
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
		hwif = ide_hwifs + h;
		if (hwif->chipset == ide_unknown)
			return hwif;	/* pick an unused entry */
	}
	printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", name);
	return NULL;
}

/**
 *	ide_setup_pci_baseregs	-	place a PCI IDE controller native
 *	@dev: PCI device of interface to switch native
 *	@name: Name of interface
 *
 *	We attempt to place the PCI interface into PCI native mode. If
 *	we succeed the BARs are ok and the controller is in PCI mode.
 *	Returns 0 on success or an errno code. 
 *
 *	FIXME: if we program the interface and then fail to set the BARS
 *	we don't switch it back to legacy mode. Do we actually care ??
 */
 
static int ide_setup_pci_baseregs (struct pci_dev *dev, const char *name)
{
	u8 progif = 0;

	/*
	 * Place both IDE interfaces into PCI "native" mode:
	 */
	if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
			 (progif & 5) != 5) {
		if ((progif & 0xa) != 0xa) {
			printk(KERN_INFO "%s: device not capable of full "
				"native PCI mode\n", name);
			return -EOPNOTSUPP;
		}
		printk("%s: placing both ports into native PCI mode\n", name);
		(void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
		if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
		    (progif & 5) != 5) {
			printk(KERN_ERR "%s: rewrite of PROGIF failed, wanted "
				"0x%04x, got 0x%04x\n",
				name, progif|5, progif);
			return -EOPNOTSUPP;
		}
	}
	return 0;
}

#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
/**
 *	ide_get_or_set_dma_base		-	setup BMIBA
145
146
 *	@d: IDE port info
 *	@hwif: IDE interface
Linus Torvalds's avatar
Linus Torvalds committed
147
 *
148
149
150
 *	Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space.
 *	Where a device has a partner that is already in DMA mode we check
 *	and enforce IDE simplex rules.
Linus Torvalds's avatar
Linus Torvalds committed
151
152
 */

153
static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_hwif_t *hwif)
Linus Torvalds's avatar
Linus Torvalds committed
154
155
156
157
158
159
160
161
162
163
{
	unsigned long	dma_base = 0;
	struct pci_dev	*dev = hwif->pci_dev;

	if (hwif->mmio)
		return hwif->dma_base;

	if (hwif->mate && hwif->mate->dma_base) {
		dma_base = hwif->mate->dma_base - (hwif->channel ? 0 : 8);
	} else {
164
165
166
167
		u8 baridx = (d->host_flags & IDE_HFLAG_CS5520) ? 2 : 4;

		dma_base = pci_resource_start(dev, baridx);

168
		if (dma_base == 0) {
169
			printk(KERN_ERR "%s: DMA base is invalid\n", d->name);
170
171
			return 0;
		}
Linus Torvalds's avatar
Linus Torvalds committed
172
173
	}

174
175
176
177
	if (hwif->channel)
		dma_base += 8;

	if ((d->host_flags & IDE_HFLAG_CS5520) == 0) {
Linus Torvalds's avatar
Linus Torvalds committed
178
179
180
181
182
183
184
185
		u8 simplex_stat = 0;

		switch(dev->device) {
			case PCI_DEVICE_ID_AL_M5219:
			case PCI_DEVICE_ID_AL_M5229:
			case PCI_DEVICE_ID_AMD_VIPER_7409:
			case PCI_DEVICE_ID_CMD_643:
			case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
186
			case PCI_DEVICE_ID_REVOLUTION:
187
188
189
				simplex_stat = inb(dma_base + 2);
				outb(simplex_stat & 0x60, dma_base + 2);
				simplex_stat = inb(dma_base + 2);
Linus Torvalds's avatar
Linus Torvalds committed
190
191
				if (simplex_stat & 0x80) {
					printk(KERN_INFO "%s: simplex device: "
192
193
							 "DMA forced\n",
							 d->name);
Linus Torvalds's avatar
Linus Torvalds committed
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
				}
				break;
			default:
				/*
				 * If the device claims "simplex" DMA,
				 * this means only one of the two interfaces
				 * can be trusted with DMA at any point in time.
				 * So we should enable DMA only on one of the
				 * two interfaces.
				 */
				simplex_stat = hwif->INB(dma_base + 2);
				if (simplex_stat & 0x80) {
					/* simplex device? */
/*
 *	At this point we haven't probed the drives so we can't make the
 *	appropriate decision. Really we should defer this problem
 *	until we tune the drive then try to grab DMA ownership if we want
 *	to be the DMA end. This has to be become dynamic to handle hot
 *	plug.
 */
					if (hwif->mate && hwif->mate->dma_base) {
						printk(KERN_INFO "%s: simplex device: "
216
217
								 "DMA disabled\n",
								 d->name);
Linus Torvalds's avatar
Linus Torvalds committed
218
219
220
221
222
223
224
225
226
						dma_base = 0;
					}
				}
		}
	}
	return dma_base;
}
#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */

227
void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d)
Linus Torvalds's avatar
Linus Torvalds committed
228
{
229
230
231
	printk(KERN_INFO "%s: IDE controller (0x%04x:0x%04x rev 0x%02x) at "
			 " PCI slot %s\n", d->name, dev->vendor, dev->device,
			 dev->revision, pci_name(dev));
Linus Torvalds's avatar
Linus Torvalds committed
232
233
234
235
236
237
238
239
}

EXPORT_SYMBOL_GPL(ide_setup_pci_noise);


/**
 *	ide_pci_enable	-	do PCI enables
 *	@dev: PCI device
240
 *	@d: IDE port info
Linus Torvalds's avatar
Linus Torvalds committed
241
242
243
244
245
246
 *
 *	Enable the IDE PCI device. We attempt to enable the device in full
 *	but if that fails then we only need BAR4 so we will enable that.
 *	
 *	Returns zero on success or an error code
 */
247

248
static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d)
Linus Torvalds's avatar
Linus Torvalds committed
249
250
251
252
253
254
255
256
257
258
259
260
261
262
{
	int ret;

	if (pci_enable_device(dev)) {
		ret = pci_enable_device_bars(dev, 1 << 4);
		if (ret < 0) {
			printk(KERN_WARNING "%s: (ide_setup_pci_device:) "
				"Could not enable device.\n", d->name);
			goto out;
		}
		printk(KERN_WARNING "%s: BIOS configuration fixed.\n", d->name);
	}

	/*
263
264
265
	 * assume all devices can do 32-bit DMA for now, we can add
	 * a DMA mask field to the struct ide_port_info if we need it
	 * (or let lower level driver set the DMA mask)
Linus Torvalds's avatar
Linus Torvalds committed
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
	 */
	ret = pci_set_dma_mask(dev, DMA_32BIT_MASK);
	if (ret < 0) {
		printk(KERN_ERR "%s: can't set dma mask\n", d->name);
		goto out;
	}

	/* FIXME: Temporary - until we put in the hotplug interface logic
	   Check that the bits we want are not in use by someone else. */
	ret = pci_request_region(dev, 4, "ide_tmp");
	if (ret < 0)
		goto out;

	pci_release_region(dev, 4);
out:
	return ret;
}

/**
 *	ide_pci_configure	-	configure an unconfigured device
 *	@dev: PCI device
287
 *	@d: IDE port info
Linus Torvalds's avatar
Linus Torvalds committed
288
289
290
291
 *
 *	Enable and configure the PCI device we have been passed.
 *	Returns zero on success or an error code.
 */
292

293
static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d)
Linus Torvalds's avatar
Linus Torvalds committed
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
{
	u16 pcicmd = 0;
	/*
	 * PnP BIOS was *supposed* to have setup this device, but we
	 * can do it ourselves, so long as the BIOS has assigned an IRQ
	 * (or possibly the device is using a "legacy header" for IRQs).
	 * Maybe the user deliberately *disabled* the device,
	 * but we'll eventually ignore it again if no drives respond.
	 */
	if (ide_setup_pci_baseregs(dev, d->name) || pci_write_config_word(dev, PCI_COMMAND, pcicmd|PCI_COMMAND_IO)) 
	{
		printk(KERN_INFO "%s: device disabled (BIOS)\n", d->name);
		return -ENODEV;
	}
	if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd)) {
		printk(KERN_ERR "%s: error accessing PCI regs\n", d->name);
		return -EIO;
	}
	if (!(pcicmd & PCI_COMMAND_IO)) {
		printk(KERN_ERR "%s: unable to enable IDE controller\n", d->name);
		return -ENXIO;
	}
	return 0;
}

/**
 *	ide_pci_check_iomem	-	check a register is I/O
321
322
323
 *	@dev: PCI device
 *	@d: IDE port info
 *	@bar: BAR number
Linus Torvalds's avatar
Linus Torvalds committed
324
325
326
327
 *
 *	Checks if a BAR is configured and points to MMIO space. If so
 *	print an error and return an error code. Otherwise return 0
 */
328

329
static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *d, int bar)
Linus Torvalds's avatar
Linus Torvalds committed
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
{
	ulong flags = pci_resource_flags(dev, bar);
	
	/* Unconfigured ? */
	if (!flags || pci_resource_len(dev, bar) == 0)
		return 0;

	/* I/O space */		
	if(flags & PCI_BASE_ADDRESS_IO_MASK)
		return 0;
		
	/* Bad */
	printk(KERN_ERR "%s: IO baseregs (BIOS) are reported "
			"as MEM, report to "
			"<andre@linux-ide.org>.\n", d->name);
	return -EINVAL;
}

/**
 *	ide_hwif_configure	-	configure an IDE interface
 *	@dev: PCI device holding interface
351
 *	@d: IDE port info
Linus Torvalds's avatar
Linus Torvalds committed
352
353
354
355
356
357
358
359
 *	@mate: Paired interface if any
 *
 *	Perform the initial set up for the hardware interface structure. This
 *	is done per interface port rather than per PCI device. There may be
 *	more than one port per device.
 *
 *	Returns the new hardware interface structure, or NULL on a failure
 */
360

361
static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, const struct ide_port_info *d, ide_hwif_t *mate, int port, int irq)
Linus Torvalds's avatar
Linus Torvalds committed
362
363
364
{
	unsigned long ctl = 0, base = 0;
	ide_hwif_t *hwif;
365
	u8 bootable = (d->host_flags & IDE_HFLAG_BOOTABLE) ? 1 : 0;
Linus Torvalds's avatar
Linus Torvalds committed
366

367
	if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) {
Linus Torvalds's avatar
Linus Torvalds committed
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
		/*  Possibly we should fail if these checks report true */
		ide_pci_check_iomem(dev, d, 2*port);
		ide_pci_check_iomem(dev, d, 2*port+1);
 
		ctl  = pci_resource_start(dev, 2*port+1);
		base = pci_resource_start(dev, 2*port);
		if ((ctl && !base) || (base && !ctl)) {
			printk(KERN_ERR "%s: inconsistent baseregs (BIOS) "
				"for port %d, skipping\n", d->name, port);
			return NULL;
		}
	}
	if (!ctl)
	{
		/* Use default values */
		ctl = port ? 0x374 : 0x3f4;
		base = port ? 0x170 : 0x1f0;
	}
386
	if ((hwif = ide_match_hwif(base, bootable, d->name)) == NULL)
Linus Torvalds's avatar
Linus Torvalds committed
387
388
389
		return NULL;	/* no room in ide_hwifs[] */
	if (hwif->io_ports[IDE_DATA_OFFSET] != base ||
	    hwif->io_ports[IDE_CONTROL_OFFSET] != (ctl | 2)) {
390
391
392
393
394
		hw_regs_t hw;

		memset(&hw, 0, sizeof(hw));
		ide_std_init_ports(&hw, base, ctl | 2);
		memcpy(hwif->io_ports, hw.io_ports, sizeof(hwif->io_ports));
395
		hwif->noprobe = 0;
Linus Torvalds's avatar
Linus Torvalds committed
396
	}
397
	hwif->chipset = d->chipset ? d->chipset : ide_pci;
Linus Torvalds's avatar
Linus Torvalds committed
398
	hwif->pci_dev = dev;
399
	hwif->cds = d;
Linus Torvalds's avatar
Linus Torvalds committed
400
401
402
403
404
405
406
407
408
409
410
411
412
413
	hwif->channel = port;

	if (!hwif->irq)
		hwif->irq = irq;
	if (mate) {
		hwif->mate = mate;
		mate->mate = hwif;
	}
	return hwif;
}

/**
 *	ide_hwif_setup_dma	-	configure DMA interface
 *	@dev: PCI device
414
415
 *	@d: IDE port info
 *	@hwif: IDE interface
Linus Torvalds's avatar
Linus Torvalds committed
416
417
418
419
420
 *
 *	Set up the DMA base for the interface. Enable the master bits as
 *	necessary and attempt to bring the device DMA into a ready to use
 *	state
 */
421

422
static void ide_hwif_setup_dma(struct pci_dev *dev, const struct ide_port_info *d, ide_hwif_t *hwif)
Linus Torvalds's avatar
Linus Torvalds committed
423
{
424
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
Linus Torvalds's avatar
Linus Torvalds committed
425
	u16 pcicmd;
426

Linus Torvalds's avatar
Linus Torvalds committed
427
428
	pci_read_config_word(dev, PCI_COMMAND, &pcicmd);

429
	if ((d->host_flags & IDE_HFLAG_NO_AUTODMA) == 0 ||
Linus Torvalds's avatar
Linus Torvalds committed
430
431
	    ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
	     (dev->class & 0x80))) {
432
		unsigned long dma_base = ide_get_or_set_dma_base(d, hwif);
Linus Torvalds's avatar
Linus Torvalds committed
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
		if (dma_base && !(pcicmd & PCI_COMMAND_MASTER)) {
			/*
 			 * Set up BM-DMA capability
			 * (PnP BIOS should have done this)
 			 */
			pci_set_master(dev);
			if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) || !(pcicmd & PCI_COMMAND_MASTER)) {
				printk(KERN_ERR "%s: %s error updating PCICMD\n",
					hwif->name, d->name);
				dma_base = 0;
			}
		}
		if (dma_base) {
			if (d->init_dma) {
				d->init_dma(hwif, dma_base);
			} else {
				ide_setup_dma(hwif, dma_base, 8);
			}
		} else {
			printk(KERN_INFO "%s: %s Bus-Master DMA disabled "
				"(BIOS)\n", hwif->name, d->name);
		}
	}
#endif /* CONFIG_BLK_DEV_IDEDMA_PCI*/
457
}
Linus Torvalds's avatar
Linus Torvalds committed
458
459
460
461

/**
 *	ide_setup_pci_controller	-	set up IDE PCI
 *	@dev: PCI device
462
 *	@d: IDE port info
Linus Torvalds's avatar
Linus Torvalds committed
463
464
465
466
467
468
469
 *	@noisy: verbose flag
 *	@config: returned as 1 if we configured the hardware
 *
 *	Set up the PCI and controller side of the IDE interface. This brings
 *	up the PCI side of the device, checks that the device is enabled
 *	and enables it if need be
 */
470

471
static int ide_setup_pci_controller(struct pci_dev *dev, const struct ide_port_info *d, int noisy, int *config)
Linus Torvalds's avatar
Linus Torvalds committed
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
{
	int ret;
	u16 pcicmd;

	if (noisy)
		ide_setup_pci_noise(dev, d);

	ret = ide_pci_enable(dev, d);
	if (ret < 0)
		goto out;

	ret = pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
	if (ret < 0) {
		printk(KERN_ERR "%s: error accessing PCI regs\n", d->name);
		goto out;
	}
	if (!(pcicmd & PCI_COMMAND_IO)) {	/* is device disabled? */
		ret = ide_pci_configure(dev, d);
		if (ret < 0)
			goto out;
		*config = 1;
		printk(KERN_INFO "%s: device enabled (Linux)\n", d->name);
	}

out:
	return ret;
}

/**
 *	ide_pci_setup_ports	-	configure ports/devices on PCI IDE
 *	@dev: PCI device
503
 *	@d: IDE port info
Linus Torvalds's avatar
Linus Torvalds committed
504
 *	@pciirq: IRQ line
505
 *	@idx: ATA index table to update
Linus Torvalds's avatar
Linus Torvalds committed
506
507
508
509
510
511
512
513
514
 *
 *	Scan the interfaces attached to this device and do any
 *	necessary per port setup. Attach the devices and ask the
 *	generic DMA layer to do its work for us.
 *
 *	Normally called automaticall from do_ide_pci_setup_device,
 *	but is also used directly as a helper function by some controllers
 *	where the chipset setup is not the default PCI IDE one.
 */
515

516
void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int pciirq, u8 *idx)
Linus Torvalds's avatar
Linus Torvalds committed
517
{
518
	int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port;
Linus Torvalds's avatar
Linus Torvalds committed
519
520
521
522
523
524
	ide_hwif_t *hwif, *mate = NULL;
	u8 tmp;

	/*
	 * Set up the IDE ports
	 */
525

526
	for (port = 0; port < channels; ++port) {
527
528
		const ide_pci_enablebit_t *e = &(d->enablebits[port]);

Linus Torvalds's avatar
Linus Torvalds committed
529
		if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) ||
530
531
		    (tmp & e->mask) != e->val)) {
			printk(KERN_INFO "%s: IDE port disabled\n", d->name);
Linus Torvalds's avatar
Linus Torvalds committed
532
			continue;	/* port not enabled */
533
		}
Linus Torvalds's avatar
Linus Torvalds committed
534
535
536
537
538
539
540

		if ((hwif = ide_hwif_configure(dev, d, mate, port, pciirq)) == NULL)
			continue;

		/* setup proper ancestral information */
		hwif->gendev.parent = &dev->dev;

541
		*(idx + port) = hwif->index;
Linus Torvalds's avatar
Linus Torvalds committed
542
543
544
545
546

		
		if (d->init_iops)
			d->init_iops(hwif);

547
		if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0)
Linus Torvalds's avatar
Linus Torvalds committed
548
			ide_hwif_setup_dma(dev, d, hwif);
549

550
551
		if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) ||
		    (d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS))
552
553
			hwif->irq = port ? 15 : 14;

554
		hwif->host_flags = d->host_flags;
Bartlomiej Zolnierkiewicz's avatar
Bartlomiej Zolnierkiewicz committed
555
		hwif->pio_mask = d->pio_mask;
556

557
558
559
		if ((d->host_flags & IDE_HFLAG_SERIALIZE) && hwif->mate)
			hwif->mate->serialized = hwif->serialized = 1;

560
561
562
563
564
565
566
567
568
569
		if (d->host_flags & IDE_HFLAG_IO_32BIT) {
			hwif->drives[0].io_32bit = 1;
			hwif->drives[1].io_32bit = 1;
		}

		if (d->host_flags & IDE_HFLAG_UNMASK_IRQS) {
			hwif->drives[0].unmask = 1;
			hwif->drives[1].unmask = 1;
		}

570
571
572
573
574
575
		if (hwif->dma_base) {
			hwif->swdma_mask = d->swdma_mask;
			hwif->mwdma_mask = d->mwdma_mask;
			hwif->ultra_mask = d->udma_mask;
		}

576
577
578
		hwif->drives[0].autotune = 1;
		hwif->drives[1].autotune = 1;

579
580
581
		if (d->host_flags & IDE_HFLAG_RQSIZE_256)
			hwif->rqsize = 256;

Linus Torvalds's avatar
Linus Torvalds committed
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
		if (d->init_hwif)
			/* Call chipset-specific routine
			 * for each enabled hwif
			 */
			d->init_hwif(hwif);

		mate = hwif;
	}
}

EXPORT_SYMBOL_GPL(ide_pci_setup_ports);

/*
 * ide_setup_pci_device() looks at the primary/secondary interfaces
 * on a PCI IDE device and, if they are enabled, prepares the IDE driver
 * for use with them.  This generic code works for most PCI chipsets.
 *
 * One thing that is not standardized is the location of the
 * primary/secondary interface "enable/disable" bits.  For chipsets that
601
 * we "know" about, this information is in the struct ide_port_info;
Linus Torvalds's avatar
Linus Torvalds committed
602
603
 * for all other chipsets, we just assume both interfaces are enabled.
 */
604
static int do_ide_setup_pci_device(struct pci_dev *dev,
605
				   const struct ide_port_info *d,
606
				   u8 *idx, u8 noisy)
Linus Torvalds's avatar
Linus Torvalds committed
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
{
	int tried_config = 0;
	int pciirq, ret;

	ret = ide_setup_pci_controller(dev, d, noisy, &tried_config);
	if (ret < 0)
		goto out;

	/*
	 * Can we trust the reported IRQ?
	 */
	pciirq = dev->irq;

	/* Is it an "IDE storage" device in non-PCI mode? */
	if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5) {
		if (noisy)
			printk(KERN_INFO "%s: not 100%% native mode: "
				"will probe irqs later\n", d->name);
		/*
		 * This allows offboard ide-pci cards the enable a BIOS,
		 * verify interrupt settings of split-mirror pci-config
		 * space, place chipset into init-mode, and/or preserve
		 * an interrupt if the card is not native ide support.
		 */
		ret = d->init_chipset ? d->init_chipset(dev, d->name) : 0;
		if (ret < 0)
			goto out;
		pciirq = ret;
	} else if (tried_config) {
		if (noisy)
			printk(KERN_INFO "%s: will probe irqs later\n", d->name);
		pciirq = 0;
	} else if (!pciirq) {
		if (noisy)
			printk(KERN_WARNING "%s: bad irq (%d): will probe later\n",
				d->name, pciirq);
		pciirq = 0;
	} else {
		if (d->init_chipset) {
			ret = d->init_chipset(dev, d->name);
			if (ret < 0)
				goto out;
		}
		if (noisy)
			printk(KERN_INFO "%s: 100%% native mode on irq %d\n",
				d->name, pciirq);
	}

	/* FIXME: silent failure can happen */

657
	ide_pci_setup_ports(dev, d, pciirq, idx);
Linus Torvalds's avatar
Linus Torvalds committed
658
659
660
661
out:
	return ret;
}

662
int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d)
Linus Torvalds's avatar
Linus Torvalds committed
663
{
664
	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
Linus Torvalds's avatar
Linus Torvalds committed
665
666
	int ret;

667
	ret = do_ide_setup_pci_device(dev, d, &idx[0], 1);
Linus Torvalds's avatar
Linus Torvalds committed
668

669
670
	if (ret >= 0)
		ide_device_add(idx);
Linus Torvalds's avatar
Linus Torvalds committed
671
672
673
674
675
676
677

	return ret;
}

EXPORT_SYMBOL_GPL(ide_setup_pci_device);

int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
678
			  const struct ide_port_info *d)
Linus Torvalds's avatar
Linus Torvalds committed
679
680
681
{
	struct pci_dev *pdev[] = { dev1, dev2 };
	int ret, i;
682
	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
Linus Torvalds's avatar
Linus Torvalds committed
683
684

	for (i = 0; i < 2; i++) {
685
		ret = do_ide_setup_pci_device(pdev[i], d, &idx[i*2], !i);
Linus Torvalds's avatar
Linus Torvalds committed
686
687
688
689
690
691
692
693
		/*
		 * FIXME: Mom, mom, they stole me the helper function to undo
		 * do_ide_setup_pci_device() on the first device!
		 */
		if (ret < 0)
			goto out;
	}

694
	ide_device_add(idx);
Linus Torvalds's avatar
Linus Torvalds committed
695
696
697
698
699
700
out:
	return ret;
}

EXPORT_SYMBOL_GPL(ide_setup_pci_devices);

701
#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
Linus Torvalds's avatar
Linus Torvalds committed
702
703
704
/*
 *	Module interfaces
 */
705

Linus Torvalds's avatar
Linus Torvalds committed
706
707
708
709
static int pre_init = 1;		/* Before first ordered IDE scan */
static LIST_HEAD(ide_pci_drivers);

/*
710
 *	__ide_pci_register_driver	-	attach IDE driver
Linus Torvalds's avatar
Linus Torvalds committed
711
 *	@driver: pci driver
712
 *	@module: owner module of the driver
Linus Torvalds's avatar
Linus Torvalds committed
713
714
 *
 *	Registers a driver with the IDE layer. The IDE layer arranges that
715
 *	boot time setup is done in the expected device order and then
Linus Torvalds's avatar
Linus Torvalds committed
716
717
718
719
720
721
 *	hands the controllers off to the core PCI code to do the rest of
 *	the work.
 *
 *	Returns are the same as for pci_register_driver
 */

722
723
int __ide_pci_register_driver(struct pci_driver *driver, struct module *module,
			      const char *mod_name)
Linus Torvalds's avatar
Linus Torvalds committed
724
{
725
	if (!pre_init)
726
		return __pci_register_driver(driver, module, mod_name);
727
	driver->driver.owner = module;
Linus Torvalds's avatar
Linus Torvalds committed
728
729
730
	list_add_tail(&driver->node, &ide_pci_drivers);
	return 0;
}
731
EXPORT_SYMBOL_GPL(__ide_pci_register_driver);
Linus Torvalds's avatar
Linus Torvalds committed
732
733
734
735
736
737
738
739
740

/**
 *	ide_scan_pcidev		-	find an IDE driver for a device
 *	@dev: PCI device to check
 *
 *	Look for an IDE driver to handle the device we are considering.
 *	This is only used during boot up to get the ordering correct. After
 *	boot up the pci layer takes over the job.
 */
741

Linus Torvalds's avatar
Linus Torvalds committed
742
743
744
745
static int __init ide_scan_pcidev(struct pci_dev *dev)
{
	struct list_head *l;
	struct pci_driver *d;
746

Sergei Shtylyov's avatar
Sergei Shtylyov committed
747
	list_for_each(l, &ide_pci_drivers) {
Linus Torvalds's avatar
Linus Torvalds committed
748
		d = list_entry(l, struct pci_driver, node);
Sergei Shtylyov's avatar
Sergei Shtylyov committed
749
		if (d->id_table) {
750
751
752
			const struct pci_device_id *id =
				pci_match_id(d->id_table, dev);

Sergei Shtylyov's avatar
Sergei Shtylyov committed
753
754
755
756
			if (id != NULL && d->probe(dev, id) >= 0) {
				dev->driver = d;
				pci_dev_get(dev);
				return 1;
Linus Torvalds's avatar
Linus Torvalds committed
757
758
759
760
761
762
763
764
765
766
767
768
769
			}
		}
	}
	return 0;
}

/**
 *	ide_scan_pcibus		-	perform the initial IDE driver scan
 *
 *	Perform the initial bus rather than driver ordered scan of the
 *	PCI drivers. After this all IDE pci handling becomes standard
 *	module ordering not traditionally ordered.
 */
770
771

int __init ide_scan_pcibus(void)
Linus Torvalds's avatar
Linus Torvalds committed
772
773
774
775
776
777
{
	struct pci_dev *dev = NULL;
	struct pci_driver *d;
	struct list_head *l, *n;

	pre_init = 0;
778
	if (!ide_scan_direction)
779
		while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)))
Linus Torvalds's avatar
Linus Torvalds committed
780
			ide_scan_pcidev(dev);
Sergei Shtylyov's avatar
Sergei Shtylyov committed
781
	else
782
783
		while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID,
						     dev)))
Linus Torvalds's avatar
Linus Torvalds committed
784
			ide_scan_pcidev(dev);
785

Linus Torvalds's avatar
Linus Torvalds committed
786
787
788
789
790
	/*
	 *	Hand the drivers over to the PCI layer now we
	 *	are post init.
	 */

791
	list_for_each_safe(l, n, &ide_pci_drivers) {
Linus Torvalds's avatar
Linus Torvalds committed
792
793
		list_del(l);
		d = list_entry(l, struct pci_driver, node);
794
795
796
797
		if (__pci_register_driver(d, d->driver.owner,
					  d->driver.mod_name))
			printk(KERN_ERR "%s: failed to register %s driver\n",
					__FUNCTION__, d->driver.mod_name);
Linus Torvalds's avatar
Linus Torvalds committed
798
	}
799
800

	return 0;
Linus Torvalds's avatar
Linus Torvalds committed
801
}
802
#endif