cfg80211.h 121 KB
Newer Older
1 2
#ifndef __NET_CFG80211_H
#define __NET_CFG80211_H
Johannes Berg's avatar
Johannes Berg committed
3 4 5
/*
 * 802.11 device and configuration interface
 *
6
 * Copyright 2006-2010	Johannes Berg <johannes@sipsolutions.net>
Johannes Berg's avatar
Johannes Berg committed
7 8 9 10 11
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
12

Johannes Berg's avatar
Johannes Berg committed
13 14 15
#include <linux/netdevice.h>
#include <linux/debugfs.h>
#include <linux/list.h>
16
#include <linux/bug.h>
17 18
#include <linux/netlink.h>
#include <linux/skbuff.h>
19
#include <linux/nl80211.h>
20 21
#include <linux/if_ether.h>
#include <linux/ieee80211.h>
Johannes Berg's avatar
Johannes Berg committed
22 23
#include <net/regulatory.h>

24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
/**
 * DOC: Introduction
 *
 * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges
 * userspace and drivers, and offers some utility functionality associated
 * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used
 * by all modern wireless drivers in Linux, so that they offer a consistent
 * API through nl80211. For backward compatibility, cfg80211 also offers
 * wireless extensions to userspace, but hides them from drivers completely.
 *
 * Additionally, cfg80211 contains code to help enforce regulatory spectrum
 * use restrictions.
 */


/**
 * DOC: Device registration
 *
 * In order for a driver to use cfg80211, it must register the hardware device
 * with cfg80211. This happens through a number of hardware capability structs
 * described below.
 *
 * The fundamental structure for each device is the 'wiphy', of which each
 * instance describes a physical wireless device connected to the system. Each
 * such wiphy can have zero, one, or many virtual interfaces associated with
 * it, which need to be identified as such by pointing the network interface's
 * @ieee80211_ptr pointer to a &struct wireless_dev which further describes
 * the wireless part of the interface, normally this struct is embedded in the
 * network interface's private data area. Drivers can optionally allow creating
 * or destroying virtual interfaces on the fly, but without at least one or the
 * ability to create some the wireless device isn't useful.
 *
 * Each wiphy structure contains device capability information, and also has
 * a pointer to the various operations the driver offers. The definitions and
 * structures here describe these capabilities in detail.
 */

61
/*
Johannes Berg's avatar
Johannes Berg committed
62 63 64 65 66 67 68 69
 * wireless hardware capability structures
 */

/**
 * enum ieee80211_band - supported frequency bands
 *
 * The bands are assigned this way because the supported
 * bitrates differ in these bands.
70
 *
Johannes Berg's avatar
Johannes Berg committed
71 72
 * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
 * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
Johannes Berg's avatar
Johannes Berg committed
73
 * @IEEE80211_NUM_BANDS: number of defined bands
74
 */
Johannes Berg's avatar
Johannes Berg committed
75
enum ieee80211_band {
76 77
	IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
	IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
Johannes Berg's avatar
Johannes Berg committed
78 79 80 81

	/* keep last */
	IEEE80211_NUM_BANDS
};
82

83
/**
Johannes Berg's avatar
Johannes Berg committed
84 85 86 87 88 89 90 91 92
 * enum ieee80211_channel_flags - channel flags
 *
 * Channel flags set by the regulatory control code.
 *
 * @IEEE80211_CHAN_DISABLED: This channel is disabled.
 * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
 *	on this channel.
 * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
 * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
93
 * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
Johannes Berg's avatar
Johannes Berg committed
94
 * 	is not permitted.
95
 * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
Johannes Berg's avatar
Johannes Berg committed
96
 * 	is not permitted.
97
 */
Johannes Berg's avatar
Johannes Berg committed
98 99 100 101 102
enum ieee80211_channel_flags {
	IEEE80211_CHAN_DISABLED		= 1<<0,
	IEEE80211_CHAN_PASSIVE_SCAN	= 1<<1,
	IEEE80211_CHAN_NO_IBSS		= 1<<2,
	IEEE80211_CHAN_RADAR		= 1<<3,
103 104
	IEEE80211_CHAN_NO_HT40PLUS	= 1<<4,
	IEEE80211_CHAN_NO_HT40MINUS	= 1<<5,
105 106
};

107
#define IEEE80211_CHAN_NO_HT40 \
108
	(IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
109

Johannes Berg's avatar
Johannes Berg committed
110 111 112 113 114 115 116 117 118 119 120 121 122 123
/**
 * struct ieee80211_channel - channel definition
 *
 * This structure describes a single channel for use
 * with cfg80211.
 *
 * @center_freq: center frequency in MHz
 * @hw_value: hardware-specific value for the channel
 * @flags: channel flags from &enum ieee80211_channel_flags.
 * @orig_flags: channel flags at registration time, used by regulatory
 *	code to support devices with additional restrictions
 * @band: band this channel belongs to.
 * @max_antenna_gain: maximum antenna gain in dBi
 * @max_power: maximum transmission power (in dBm)
124
 * @max_reg_power: maximum regulatory transmission power (in dBm)
Johannes Berg's avatar
Johannes Berg committed
125 126
 * @beacon_found: helper to regulatory code to indicate when a beacon
 *	has been found on this channel. Use regulatory_hint_found_beacon()
127
 *	to enable this, this is useful only on 5 GHz band.
Johannes Berg's avatar
Johannes Berg committed
128 129
 * @orig_mag: internal use
 * @orig_mpwr: internal use
Andy Green's avatar
Andy Green committed
130
 */
Johannes Berg's avatar
Johannes Berg committed
131 132 133 134 135 136 137
struct ieee80211_channel {
	enum ieee80211_band band;
	u16 center_freq;
	u16 hw_value;
	u32 flags;
	int max_antenna_gain;
	int max_power;
138
	int max_reg_power;
Johannes Berg's avatar
Johannes Berg committed
139 140 141 142 143
	bool beacon_found;
	u32 orig_flags;
	int orig_mag, orig_mpwr;
};

Andy Green's avatar
Andy Green committed
144
/**
Johannes Berg's avatar
Johannes Berg committed
145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163
 * enum ieee80211_rate_flags - rate flags
 *
 * Hardware/specification flags for rates. These are structured
 * in a way that allows using the same bitrate structure for
 * different bands/PHY modes.
 *
 * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
 *	preamble on this bitrate; only relevant in 2.4GHz band and
 *	with CCK rates.
 * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
 *	when used with 802.11a (on the 5 GHz band); filled by the
 *	core code when registering the wiphy.
 * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
 *	when used with 802.11b (on the 2.4 GHz band); filled by the
 *	core code when registering the wiphy.
 * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
 *	when used with 802.11g (on the 2.4 GHz band); filled by the
 *	core code when registering the wiphy.
 * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
Andy Green's avatar
Andy Green committed
164
 */
Johannes Berg's avatar
Johannes Berg committed
165 166 167 168 169 170 171
enum ieee80211_rate_flags {
	IEEE80211_RATE_SHORT_PREAMBLE	= 1<<0,
	IEEE80211_RATE_MANDATORY_A	= 1<<1,
	IEEE80211_RATE_MANDATORY_B	= 1<<2,
	IEEE80211_RATE_MANDATORY_G	= 1<<3,
	IEEE80211_RATE_ERP_G		= 1<<4,
};
Andy Green's avatar
Andy Green committed
172

Johannes Berg's avatar
Johannes Berg committed
173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191
/**
 * struct ieee80211_rate - bitrate definition
 *
 * This structure describes a bitrate that an 802.11 PHY can
 * operate with. The two values @hw_value and @hw_value_short
 * are only for driver use when pointers to this structure are
 * passed around.
 *
 * @flags: rate-specific flags
 * @bitrate: bitrate in units of 100 Kbps
 * @hw_value: driver/hardware value for this rate
 * @hw_value_short: driver/hardware value for this rate when
 *	short preamble is used
 */
struct ieee80211_rate {
	u32 flags;
	u16 bitrate;
	u16 hw_value, hw_value_short;
};
Andy Green's avatar
Andy Green committed
192

Johannes Berg's avatar
Johannes Berg committed
193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210
/**
 * struct ieee80211_sta_ht_cap - STA's HT capabilities
 *
 * This structure describes most essential parameters needed
 * to describe 802.11n HT capabilities for an STA.
 *
 * @ht_supported: is HT supported by the STA
 * @cap: HT capabilities map as described in 802.11n spec
 * @ampdu_factor: Maximum A-MPDU length factor
 * @ampdu_density: Minimum A-MPDU spacing
 * @mcs: Supported MCS rates
 */
struct ieee80211_sta_ht_cap {
	u16 cap; /* use IEEE80211_HT_CAP_ */
	bool ht_supported;
	u8 ampdu_factor;
	u8 ampdu_density;
	struct ieee80211_mcs_info mcs;
Andy Green's avatar
Andy Green committed
211 212
};

Johannes Berg's avatar
Johannes Berg committed
213 214 215 216 217 218 219 220 221 222 223 224 225 226
/**
 * struct ieee80211_supported_band - frequency band definition
 *
 * This structure describes a frequency band a wiphy
 * is able to operate in.
 *
 * @channels: Array of channels the hardware can operate in
 *	in this band.
 * @band: the band this structure represents
 * @n_channels: Number of channels in @channels
 * @bitrates: Array of bitrates the hardware can operate with
 *	in this band. Must be sorted to give a valid "supported
 *	rates" IE, i.e. CCK rates first, then OFDM.
 * @n_bitrates: Number of bitrates in @bitrates
Johannes Berg's avatar
Johannes Berg committed
227
 * @ht_cap: HT capabilities in this band
Johannes Berg's avatar
Johannes Berg committed
228 229 230 231 232 233 234 235 236
 */
struct ieee80211_supported_band {
	struct ieee80211_channel *channels;
	struct ieee80211_rate *bitrates;
	enum ieee80211_band band;
	int n_channels;
	int n_bitrates;
	struct ieee80211_sta_ht_cap ht_cap;
};
Andy Green's avatar
Andy Green committed
237

Johannes Berg's avatar
Johannes Berg committed
238 239 240
/*
 * Wireless hardware/device configuration structures and methods
 */
Andy Green's avatar
Andy Green committed
241

242 243 244 245 246 247 248 249 250 251 252 253 254 255 256
/**
 * DOC: Actions and configuration
 *
 * Each wireless device and each virtual interface offer a set of configuration
 * operations and other actions that are invoked by userspace. Each of these
 * actions is described in the operations structure, and the parameters these
 * operations use are described separately.
 *
 * Additionally, some operations are asynchronous and expect to get status
 * information via some functions that drivers need to call.
 *
 * Scanning and BSS list handling with its associated functionality is described
 * in a separate chapter.
 */

Johannes Berg's avatar
Johannes Berg committed
257 258
/**
 * struct vif_params - describes virtual interface parameters
259
 * @use_4addr: use 4-address frames
Johannes Berg's avatar
Johannes Berg committed
260 261
 */
struct vif_params {
262
       int use_4addr;
Johannes Berg's avatar
Johannes Berg committed
263
};
Andy Green's avatar
Andy Green committed
264

Johannes Berg's avatar
Johannes Berg committed
265
/**
266 267 268 269 270 271 272 273 274 275
 * struct key_params - key information
 *
 * Information about a key
 *
 * @key: key material
 * @key_len: length of key material
 * @cipher: cipher suite selector
 * @seq: sequence counter (IV/PN) for TKIP and CCMP keys, only used
 *	with the get_key() callback, must be in little endian,
 *	length given by @seq_len.
Johannes Berg's avatar
Johannes Berg committed
276
 * @seq_len: length of @seq.
277 278 279 280 281 282 283 284 285
 */
struct key_params {
	u8 *key;
	u8 *seq;
	int key_len;
	int seq_len;
	u32 cipher;
};

286 287 288
/**
 * enum survey_info_flags - survey information flags
 *
Johannes Berg's avatar
Johannes Berg committed
289
 * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in
290
 * @SURVEY_INFO_IN_USE: channel is currently being used
291 292 293 294 295
 * @SURVEY_INFO_CHANNEL_TIME: channel active time (in ms) was filled in
 * @SURVEY_INFO_CHANNEL_TIME_BUSY: channel busy time was filled in
 * @SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: extension channel busy time was filled in
 * @SURVEY_INFO_CHANNEL_TIME_RX: channel receive time was filled in
 * @SURVEY_INFO_CHANNEL_TIME_TX: channel transmit time was filled in
Johannes Berg's avatar
Johannes Berg committed
296
 *
297 298 299 300 301
 * Used by the driver to indicate which info in &struct survey_info
 * it has filled in during the get_survey().
 */
enum survey_info_flags {
	SURVEY_INFO_NOISE_DBM = 1<<0,
302
	SURVEY_INFO_IN_USE = 1<<1,
303 304 305 306 307
	SURVEY_INFO_CHANNEL_TIME = 1<<2,
	SURVEY_INFO_CHANNEL_TIME_BUSY = 1<<3,
	SURVEY_INFO_CHANNEL_TIME_EXT_BUSY = 1<<4,
	SURVEY_INFO_CHANNEL_TIME_RX = 1<<5,
	SURVEY_INFO_CHANNEL_TIME_TX = 1<<6,
308 309 310 311 312 313 314 315 316
};

/**
 * struct survey_info - channel survey response
 *
 * @channel: the channel this survey record reports, mandatory
 * @filled: bitflag of flags from &enum survey_info_flags
 * @noise: channel noise in dBm. This and all following fields are
 *     optional
317 318 319 320 321
 * @channel_time: amount of time in ms the radio spent on the channel
 * @channel_time_busy: amount of time the primary channel was sensed busy
 * @channel_time_ext_busy: amount of time the extension channel was sensed busy
 * @channel_time_rx: amount of time the radio spent receiving data
 * @channel_time_tx: amount of time the radio spent transmitting data
322
 *
Johannes Berg's avatar
Johannes Berg committed
323 324
 * Used by dump_survey() to report back per-channel survey information.
 *
325 326 327 328 329
 * This structure can later be expanded with things like
 * channel duty cycle etc.
 */
struct survey_info {
	struct ieee80211_channel *channel;
330 331 332 333 334
	u64 channel_time;
	u64 channel_time_busy;
	u64 channel_time_ext_busy;
	u64 channel_time_rx;
	u64 channel_time_tx;
335 336 337 338
	u32 filled;
	s8 noise;
};

339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368
/**
 * struct cfg80211_crypto_settings - Crypto settings
 * @wpa_versions: indicates which, if any, WPA versions are enabled
 *	(from enum nl80211_wpa_versions)
 * @cipher_group: group key cipher suite (or 0 if unset)
 * @n_ciphers_pairwise: number of AP supported unicast ciphers
 * @ciphers_pairwise: unicast key cipher suites
 * @n_akm_suites: number of AKM suites
 * @akm_suites: AKM suites
 * @control_port: Whether user space controls IEEE 802.1X port, i.e.,
 *	sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
 *	required to assume that the port is unauthorized until authorized by
 *	user space. Otherwise, port is marked authorized by default.
 * @control_port_ethertype: the control port protocol that should be
 *	allowed through even on unauthorized ports
 * @control_port_no_encrypt: TRUE to prevent encryption of control port
 *	protocol frames.
 */
struct cfg80211_crypto_settings {
	u32 wpa_versions;
	u32 cipher_group;
	int n_ciphers_pairwise;
	u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES];
	int n_akm_suites;
	u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
	bool control_port;
	__be16 control_port_ethertype;
	bool control_port_no_encrypt;
};

369
/**
370
 * struct cfg80211_beacon_data - beacon data
371 372 373 374 375 376
 * @head: head portion of beacon (before TIM IE)
 *     or %NULL if not changed
 * @tail: tail portion of beacon (after TIM IE)
 *     or %NULL if not changed
 * @head_len: length of @head
 * @tail_len: length of @tail
377 378 379 380 381 382 383 384
 * @beacon_ies: extra information element(s) to add into Beacon frames or %NULL
 * @beacon_ies_len: length of beacon_ies in octets
 * @proberesp_ies: extra information element(s) to add into Probe Response
 *	frames or %NULL
 * @proberesp_ies_len: length of proberesp_ies in octets
 * @assocresp_ies: extra information element(s) to add into (Re)Association
 *	Response frames or %NULL
 * @assocresp_ies_len: length of assocresp_ies in octets
385 386
 * @probe_resp_len: length of probe response template (@probe_resp)
 * @probe_resp: probe response template (AP mode only)
387
 */
388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406
struct cfg80211_beacon_data {
	const u8 *head, *tail;
	const u8 *beacon_ies;
	const u8 *proberesp_ies;
	const u8 *assocresp_ies;
	const u8 *probe_resp;

	size_t head_len, tail_len;
	size_t beacon_ies_len;
	size_t proberesp_ies_len;
	size_t assocresp_ies_len;
	size_t probe_resp_len;
};

/**
 * struct cfg80211_ap_settings - AP configuration
 *
 * Used to configure an AP interface.
 *
407 408
 * @channel: the channel to start the AP on
 * @channel_type: the channel type to use
409 410 411 412 413 414 415 416 417 418
 * @beacon: beacon data
 * @beacon_interval: beacon interval
 * @dtim_period: DTIM period
 * @ssid: SSID to be used in the BSS (note: may be %NULL if not provided from
 *	user space)
 * @ssid_len: length of @ssid
 * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames
 * @crypto: crypto settings
 * @privacy: the BSS uses privacy
 * @auth_type: Authentication type (algorithm)
419
 * @inactivity_timeout: time in seconds to determine station's inactivity.
420 421
 */
struct cfg80211_ap_settings {
422 423 424
	struct ieee80211_channel *channel;
	enum nl80211_channel_type channel_type;

425 426 427
	struct cfg80211_beacon_data beacon;

	int beacon_interval, dtim_period;
428 429 430
	const u8 *ssid;
	size_t ssid_len;
	enum nl80211_hidden_ssid hidden_ssid;
431 432 433
	struct cfg80211_crypto_settings crypto;
	bool privacy;
	enum nl80211_auth_type auth_type;
434
	int inactivity_timeout;
435 436
};

437 438 439 440 441
/**
 * enum plink_action - actions to perform in mesh peers
 *
 * @PLINK_ACTION_INVALID: action 0 is reserved
 * @PLINK_ACTION_OPEN: start mesh peer link establishment
Johannes Berg's avatar
Johannes Berg committed
442
 * @PLINK_ACTION_BLOCK: block traffic from this mesh peer
443 444 445 446 447 448 449
 */
enum plink_actions {
	PLINK_ACTION_INVALID,
	PLINK_ACTION_OPEN,
	PLINK_ACTION_BLOCK,
};

450 451 452 453 454 455 456 457 458 459 460
/**
 * enum station_parameters_apply_mask - station parameter values to apply
 * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
 *
 * Not all station parameters have in-band "no change" signalling,
 * for those that don't these flags will are used.
 */
enum station_parameters_apply_mask {
	STATION_PARAM_APPLY_UAPSD = BIT(0),
};

461 462 463 464 465 466 467 468 469
/**
 * struct station_parameters - station parameters
 *
 * Used to change and create a new station.
 *
 * @vlan: vlan interface station should belong to
 * @supported_rates: supported rates in IEEE 802.11 format
 *	(or NULL for no change)
 * @supported_rates_len: number of supported rates
470 471 472 473
 * @sta_flags_mask: station flags that changed
 *	(bitmask of BIT(NL80211_STA_FLAG_...))
 * @sta_flags_set: station flags values
 *	(bitmask of BIT(NL80211_STA_FLAG_...))
474 475
 * @listen_interval: listen interval or -1 for no change
 * @aid: AID or zero for no change
Johannes Berg's avatar
Johannes Berg committed
476
 * @plink_action: plink action to take
477
 * @plink_state: set the peer link state for a station
Johannes Berg's avatar
Johannes Berg committed
478
 * @ht_capa: HT capabilities of station
479 480 481 482
 * @uapsd_queues: bitmap of queues configured for uapsd. same format
 *	as the AC bitmap in the QoS info field
 * @max_sp: max Service Period. same format as the MAX_SP in the
 *	QoS info field (but already shifted down)
483 484 485
 * @sta_modify_mask: bitmap indicating which parameters changed
 *	(for those that don't have a natural "no change" value),
 *	see &enum station_parameters_apply_mask
486 487 488 489
 */
struct station_parameters {
	u8 *supported_rates;
	struct net_device *vlan;
490
	u32 sta_flags_mask, sta_flags_set;
491
	u32 sta_modify_mask;
492 493 494
	int listen_interval;
	u16 aid;
	u8 supported_rates_len;
495
	u8 plink_action;
496
	u8 plink_state;
497
	struct ieee80211_ht_cap *ht_capa;
498 499
	u8 uapsd_queues;
	u8 max_sp;
500 501
};

502
/**
503
 * enum station_info_flags - station information flags
504
 *
505 506
 * Used by the driver to indicate which info in &struct station_info
 * it has filled in during get_station() or dump_station().
507
 *
508 509 510 511 512 513
 * @STATION_INFO_INACTIVE_TIME: @inactive_time filled
 * @STATION_INFO_RX_BYTES: @rx_bytes filled
 * @STATION_INFO_TX_BYTES: @tx_bytes filled
 * @STATION_INFO_LLID: @llid filled
 * @STATION_INFO_PLID: @plid filled
 * @STATION_INFO_PLINK_STATE: @plink_state filled
514
 * @STATION_INFO_SIGNAL: @signal filled
515
 * @STATION_INFO_TX_BITRATE: @txrate fields are filled
516
 *  (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
517 518
 * @STATION_INFO_RX_PACKETS: @rx_packets filled
 * @STATION_INFO_TX_PACKETS: @tx_packets filled
519 520
 * @STATION_INFO_TX_RETRIES: @tx_retries filled
 * @STATION_INFO_TX_FAILED: @tx_failed filled
521
 * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
522
 * @STATION_INFO_SIGNAL_AVG: @signal_avg filled
523
 * @STATION_INFO_RX_BITRATE: @rxrate fields are filled
524
 * @STATION_INFO_BSS_PARAM: @bss_param filled
525
 * @STATION_INFO_CONNECTED_TIME: @connected_time filled
526
 * @STATION_INFO_ASSOC_REQ_IES: @assoc_req_ies filled
527
 * @STATION_INFO_STA_FLAGS: @sta_flags filled
528
 * @STATION_INFO_BEACON_LOSS_COUNT: @beacon_loss_count filled
529
 * @STATION_INFO_T_OFFSET: @t_offset filled
530
 */
531 532 533 534 535 536 537
enum station_info_flags {
	STATION_INFO_INACTIVE_TIME	= 1<<0,
	STATION_INFO_RX_BYTES		= 1<<1,
	STATION_INFO_TX_BYTES		= 1<<2,
	STATION_INFO_LLID		= 1<<3,
	STATION_INFO_PLID		= 1<<4,
	STATION_INFO_PLINK_STATE	= 1<<5,
538 539
	STATION_INFO_SIGNAL		= 1<<6,
	STATION_INFO_TX_BITRATE		= 1<<7,
540 541
	STATION_INFO_RX_PACKETS		= 1<<8,
	STATION_INFO_TX_PACKETS		= 1<<9,
542 543
	STATION_INFO_TX_RETRIES		= 1<<10,
	STATION_INFO_TX_FAILED		= 1<<11,
544
	STATION_INFO_RX_DROP_MISC	= 1<<12,
545
	STATION_INFO_SIGNAL_AVG		= 1<<13,
546
	STATION_INFO_RX_BITRATE		= 1<<14,
547
	STATION_INFO_BSS_PARAM          = 1<<15,
548
	STATION_INFO_CONNECTED_TIME	= 1<<16,
549
	STATION_INFO_ASSOC_REQ_IES	= 1<<17,
550
	STATION_INFO_STA_FLAGS		= 1<<18,
551 552
	STATION_INFO_BEACON_LOSS_COUNT	= 1<<19,
	STATION_INFO_T_OFFSET		= 1<<20,
553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583
};

/**
 * enum station_info_rate_flags - bitrate info flags
 *
 * Used by the driver to indicate the specific rate transmission
 * type for 802.11n transmissions.
 *
 * @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled
 * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission
 * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
 */
enum rate_info_flags {
	RATE_INFO_FLAGS_MCS		= 1<<0,
	RATE_INFO_FLAGS_40_MHZ_WIDTH	= 1<<1,
	RATE_INFO_FLAGS_SHORT_GI	= 1<<2,
};

/**
 * struct rate_info - bitrate information
 *
 * Information about a receiving or transmitting bitrate
 *
 * @flags: bitflag of flags from &enum rate_info_flags
 * @mcs: mcs index if struct describes a 802.11n bitrate
 * @legacy: bitrate in 100kbit/s for 802.11abg
 */
struct rate_info {
	u8 flags;
	u8 mcs;
	u16 legacy;
584 585
};

586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616
/**
 * enum station_info_rate_flags - bitrate info flags
 *
 * Used by the driver to indicate the specific rate transmission
 * type for 802.11n transmissions.
 *
 * @BSS_PARAM_FLAGS_CTS_PROT: whether CTS protection is enabled
 * @BSS_PARAM_FLAGS_SHORT_PREAMBLE: whether short preamble is enabled
 * @BSS_PARAM_FLAGS_SHORT_SLOT_TIME: whether short slot time is enabled
 */
enum bss_param_flags {
	BSS_PARAM_FLAGS_CTS_PROT	= 1<<0,
	BSS_PARAM_FLAGS_SHORT_PREAMBLE	= 1<<1,
	BSS_PARAM_FLAGS_SHORT_SLOT_TIME	= 1<<2,
};

/**
 * struct sta_bss_parameters - BSS parameters for the attached station
 *
 * Information about the currently associated BSS
 *
 * @flags: bitflag of flags from &enum bss_param_flags
 * @dtim_period: DTIM period for the BSS
 * @beacon_interval: beacon interval
 */
struct sta_bss_parameters {
	u8 flags;
	u8 dtim_period;
	u16 beacon_interval;
};

617
/**
618
 * struct station_info - station information
619
 *
620
 * Station information filled by driver for get_station() and dump_station.
621
 *
622
 * @filled: bitflag of flags from &enum station_info_flags
623
 * @connected_time: time(in secs) since a station is last connected
624 625 626
 * @inactive_time: time since last station activity (tx/rx) in milliseconds
 * @rx_bytes: bytes received from this station
 * @tx_bytes: bytes transmitted to this station
627 628 629
 * @llid: mesh local link id
 * @plid: mesh peer link id
 * @plink_state: mesh peer link state
630 631 632 633
 * @signal: the signal strength, type depends on the wiphy's signal_type
	NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
 * @signal_avg: avg signal strength, type depends on the wiphy's signal_type
	NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
634 635
 * @txrate: current unicast bitrate from this station
 * @rxrate: current unicast bitrate to this station
636 637
 * @rx_packets: packets received from this station
 * @tx_packets: packets transmitted to this station
638 639
 * @tx_retries: cumulative retry counts
 * @tx_failed: number of failed transmissions (retries exceeded, no ACK)
640
 * @rx_dropped_misc:  Dropped for un-specified reason.
641
 * @bss_param: current BSS parameters
642 643 644 645
 * @generation: generation number for nl80211 dumps.
 *	This number should increase every time the list of stations
 *	changes, i.e. when a station is added or removed, so that
 *	userspace can tell whether it got a consistent snapshot.
646 647 648 649 650
 * @assoc_req_ies: IEs from (Re)Association Request.
 *	This is used only when in AP mode with drivers that do not use
 *	user space MLME/SME implementation. The information is provided for
 *	the cfg80211_new_sta() calls to notify user space of the IEs.
 * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets.
651
 * @sta_flags: station flags mask & values
652
 * @beacon_loss_count: Number of times beacon loss event has triggered.
653
 * @t_offset: Time offset of the station relative to this host.
654
 */
655
struct station_info {
656
	u32 filled;
657
	u32 connected_time;
658 659 660
	u32 inactive_time;
	u32 rx_bytes;
	u32 tx_bytes;
661 662 663
	u16 llid;
	u16 plid;
	u8 plink_state;
664
	s8 signal;
665
	s8 signal_avg;
666
	struct rate_info txrate;
667
	struct rate_info rxrate;
668 669
	u32 rx_packets;
	u32 tx_packets;
670 671
	u32 tx_retries;
	u32 tx_failed;
672
	u32 rx_dropped_misc;
673
	struct sta_bss_parameters bss_param;
674
	struct nl80211_sta_flag_update sta_flags;
675 676

	int generation;
677 678 679

	const u8 *assoc_req_ies;
	size_t assoc_req_ies_len;
680

681
	u32 beacon_loss_count;
682
	s64 t_offset;
683

684 685 686 687
	/*
	 * Note: Add a new enum station_info_flags value for each new field and
	 * use it to check which fields are initialized.
	 */
688 689
};

690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709
/**
 * enum monitor_flags - monitor flags
 *
 * Monitor interface configuration flags. Note that these must be the bits
 * according to the nl80211 flags.
 *
 * @MONITOR_FLAG_FCSFAIL: pass frames with bad FCS
 * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP
 * @MONITOR_FLAG_CONTROL: pass control frames
 * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering
 * @MONITOR_FLAG_COOK_FRAMES: report frames after processing
 */
enum monitor_flags {
	MONITOR_FLAG_FCSFAIL		= 1<<NL80211_MNTR_FLAG_FCSFAIL,
	MONITOR_FLAG_PLCPFAIL		= 1<<NL80211_MNTR_FLAG_PLCPFAIL,
	MONITOR_FLAG_CONTROL		= 1<<NL80211_MNTR_FLAG_CONTROL,
	MONITOR_FLAG_OTHER_BSS		= 1<<NL80211_MNTR_FLAG_OTHER_BSS,
	MONITOR_FLAG_COOK_FRAMES	= 1<<NL80211_MNTR_FLAG_COOK_FRAMES,
};

710 711 712 713 714 715
/**
 * enum mpath_info_flags -  mesh path information flags
 *
 * Used by the driver to indicate which info in &struct mpath_info it has filled
 * in during get_station() or dump_station().
 *
Johannes Berg's avatar
Johannes Berg committed
716 717 718 719 720 721 722
 * @MPATH_INFO_FRAME_QLEN: @frame_qlen filled
 * @MPATH_INFO_SN: @sn filled
 * @MPATH_INFO_METRIC: @metric filled
 * @MPATH_INFO_EXPTIME: @exptime filled
 * @MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled
 * @MPATH_INFO_DISCOVERY_RETRIES: @discovery_retries filled
 * @MPATH_INFO_FLAGS: @flags filled
723 724 725
 */
enum mpath_info_flags {
	MPATH_INFO_FRAME_QLEN		= BIT(0),
726
	MPATH_INFO_SN			= BIT(1),
727 728 729 730 731 732 733 734 735 736 737 738 739 740
	MPATH_INFO_METRIC		= BIT(2),
	MPATH_INFO_EXPTIME		= BIT(3),
	MPATH_INFO_DISCOVERY_TIMEOUT	= BIT(4),
	MPATH_INFO_DISCOVERY_RETRIES	= BIT(5),
	MPATH_INFO_FLAGS		= BIT(6),
};

/**
 * struct mpath_info - mesh path information
 *
 * Mesh path information filled by driver for get_mpath() and dump_mpath().
 *
 * @filled: bitfield of flags from &enum mpath_info_flags
 * @frame_qlen: number of queued frames for this destination
741
 * @sn: target sequence number
742 743 744 745 746
 * @metric: metric (cost) of this mesh path
 * @exptime: expiration time for the mesh path from now, in msecs
 * @flags: mesh path flags
 * @discovery_timeout: total mesh path discovery timeout, in msecs
 * @discovery_retries: mesh path discovery retries
747 748 749 750
 * @generation: generation number for nl80211 dumps.
 *	This number should increase every time the list of mesh paths
 *	changes, i.e. when a station is added or removed, so that
 *	userspace can tell whether it got a consistent snapshot.
751 752 753 754
 */
struct mpath_info {
	u32 filled;
	u32 frame_qlen;
755
	u32 sn;
756 757 758 759 760
	u32 metric;
	u32 exptime;
	u32 discovery_timeout;
	u8 discovery_retries;
	u8 flags;
761 762

	int generation;
763 764
};

765 766 767 768 769 770 771 772 773 774 775
/**
 * struct bss_parameters - BSS parameters
 *
 * Used to change BSS parameters (mainly for AP mode).
 *
 * @use_cts_prot: Whether to use CTS protection
 *	(0 = no, 1 = yes, -1 = do not change)
 * @use_short_preamble: Whether the use of short preambles is allowed
 *	(0 = no, 1 = yes, -1 = do not change)
 * @use_short_slot_time: Whether the use of short slot time is allowed
 *	(0 = no, 1 = yes, -1 = do not change)
776 777 778
 * @basic_rates: basic rates in IEEE 802.11 format
 *	(or NULL for no change)
 * @basic_rates_len: number of basic rates
779
 * @ap_isolate: do not forward packets between connected stations
780 781
 * @ht_opmode: HT Operation mode
 * 	(u16 = opmode, -1 = do not change)
782 783 784 785 786
 */
struct bss_parameters {
	int use_cts_prot;
	int use_short_preamble;
	int use_short_slot_time;
787 788
	u8 *basic_rates;
	u8 basic_rates_len;
789
	int ap_isolate;
790
	int ht_opmode;
791
};
792

793
/**
794 795 796
 * struct mesh_config - 802.11s mesh configuration
 *
 * These parameters can be changed while the mesh is active.
797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844
 *
 * @dot11MeshRetryTimeout: the initial retry timeout in millisecond units used
 *	by the Mesh Peering Open message
 * @dot11MeshConfirmTimeout: the initial retry timeout in millisecond units
 *	used by the Mesh Peering Open message
 * @dot11MeshHoldingTimeout: the confirm timeout in millisecond units used by
 *	the mesh peering management to close a mesh peering
 * @dot11MeshMaxPeerLinks: the maximum number of peer links allowed on this
 *	mesh interface
 * @dot11MeshMaxRetries: the maximum number of peer link open retries that can
 *	be sent to establish a new peer link instance in a mesh
 * @dot11MeshTTL: the value of TTL field set at a source mesh STA
 * @element_ttl: the value of TTL field set at a mesh STA for path selection
 *	elements
 * @auto_open_plinks: whether we should automatically open peer links when we
 *	detect compatible mesh peers
 * @dot11MeshNbrOffsetMaxNeighbor: the maximum number of neighbors to
 *	synchronize to for 11s default synchronization method
 * @dot11MeshHWMPmaxPREQretries: the number of action frames containing a PREQ
 *	that an originator mesh STA can send to a particular path target
 * @path_refresh_time: how frequently to refresh mesh paths in milliseconds
 * @min_discovery_timeout: the minimum length of time to wait until giving up on
 *	a path discovery in milliseconds
 * @dot11MeshHWMPactivePathTimeout: the time (in TUs) for which mesh STAs
 *	receiving a PREQ shall consider the forwarding information from the
 *	root to be valid. (TU = time unit)
 * @dot11MeshHWMPpreqMinInterval: the minimum interval of time (in TUs) during
 *	which a mesh STA can send only one action frame containing a PREQ
 *	element
 * @dot11MeshHWMPperrMinInterval: the minimum interval of time (in TUs) during
 *	which a mesh STA can send only one Action frame containing a PERR
 *	element
 * @dot11MeshHWMPnetDiameterTraversalTime: the interval of time (in TUs) that
 *	it takes for an HWMP information element to propagate across the mesh
 * @dot11MeshHWMPRootMode: the configuration of a mesh STA as root mesh STA
 * @dot11MeshHWMPRannInterval: the interval of time (in TUs) between root
 *	announcements are transmitted
 * @dot11MeshGateAnnouncementProtocol: whether to advertise that this mesh
 *	station has access to a broader network beyond the MBSS. (This is
 *	missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol set to true
 *	only means that the station will announce others it's a mesh gate, but
 *	not necessarily using the gate announcement protocol. Still keeping the
 *	same nomenclature to be in sync with the spec)
 * @dot11MeshForwarding: whether the Mesh STA is forwarding or non-forwarding
 *	entity (default is TRUE - forwarding entity)
 * @rssi_threshold: the threshold for average signal strength of candidate
 *	station to establish a peer link
 * @ht_opmode: mesh HT protection mode
845
 */
846 847 848 849 850
struct mesh_config {
	u16 dot11MeshRetryTimeout;
	u16 dot11MeshConfirmTimeout;
	u16 dot11MeshHoldingTimeout;
	u16 dot11MeshMaxPeerLinks;
851 852 853
	u8 dot11MeshMaxRetries;
	u8 dot11MeshTTL;
	u8 element_ttl;
854
	bool auto_open_plinks;
855
	u32 dot11MeshNbrOffsetMaxNeighbor;
856
	u8 dot11MeshHWMPmaxPREQretries;
857 858 859 860
	u32 path_refresh_time;
	u16 min_discovery_timeout;
	u32 dot11MeshHWMPactivePathTimeout;
	u16 dot11MeshHWMPpreqMinInterval;
861
	u16 dot11MeshHWMPperrMinInterval;
862
	u16 dot11MeshHWMPnetDiameterTraversalTime;
863
	u8 dot11MeshHWMPRootMode;
864
	u16 dot11MeshHWMPRannInterval;
865
	bool dot11MeshGateAnnouncementProtocol;
866
	bool dot11MeshForwarding;
867
	s32 rssi_threshold;
868
	u16 ht_opmode;
869 870
};

871 872
/**
 * struct mesh_setup - 802.11s mesh setup configuration
873 874
 * @channel: the channel to start the mesh network on
 * @channel_type: the channel type to use
875 876
 * @mesh_id: the mesh ID
 * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes
877
 * @sync_method: which synchronization method to use
878 879
 * @path_sel_proto: which path selection protocol to use
 * @path_metric: which metric to use
880 881
 * @ie: vendor information elements (optional)
 * @ie_len: length of vendor information elements
882 883
 * @is_authenticated: this mesh requires authentication
 * @is_secure: this mesh uses security
884
 * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a]
885 886 887 888
 *
 * These parameters are fixed when the mesh is created.
 */
struct mesh_setup {
889 890
	struct ieee80211_channel *channel;
	enum nl80211_channel_type channel_type;
891 892
	const u8 *mesh_id;
	u8 mesh_id_len;
893 894 895
	u8 sync_method;
	u8 path_sel_proto;
	u8 path_metric;
896 897
	const u8 *ie;
	u8 ie_len;
898
	bool is_authenticated;
899
	bool is_secure;
900
	int mcast_rate[IEEE80211_NUM_BANDS];
901 902
};

903 904
/**
 * struct ieee80211_txq_params - TX queue parameters
905
 * @ac: AC identifier
906 907 908 909 910 911 912 913
 * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
 * @cwmin: Minimum contention window [a value of the form 2^n-1 in the range
 *	1..32767]
 * @cwmax: Maximum contention window [a value of the form 2^n-1 in the range
 *	1..32767]
 * @aifs: Arbitration interframe space [0..255]
 */
struct ieee80211_txq_params {
914
	enum nl80211_ac ac;
915 916 917 918 919 920
	u16 txop;
	u16 cwmin;
	u16 cwmax;
	u8 aifs;
};

921 922 923
/* from net/wireless.h */
struct wiphy;

924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945
/**
 * DOC: Scanning and BSS list handling
 *
 * The scanning process itself is fairly simple, but cfg80211 offers quite
 * a bit of helper functionality. To start a scan, the scan operation will
 * be invoked with a scan definition. This scan definition contains the
 * channels to scan, and the SSIDs to send probe requests for (including the
 * wildcard, if desired). A passive scan is indicated by having no SSIDs to
 * probe. Additionally, a scan request may contain extra information elements
 * that should be added to the probe request. The IEs are guaranteed to be
 * well-formed, and will not exceed the maximum length the driver advertised
 * in the wiphy structure.
 *
 * When scanning finds a BSS, cfg80211 needs to be notified of that, because
 * it is responsible for maintaining the BSS list; the driver should not
 * maintain a list itself. For this notification, various functions exist.
 *
 * Since drivers do not maintain a BSS list, there are also a number of
 * functions to search for a BSS and obtain information about it from the
 * BSS structure cfg80211 maintains. The BSS list is also made available
 * to userspace.
 */
946

947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962
/**
 * struct cfg80211_ssid - SSID description
 * @ssid: the SSID
 * @ssid_len: length of the ssid
 */
struct cfg80211_ssid {
	u8 ssid[IEEE80211_MAX_SSID_LEN];
	u8 ssid_len;
};

/**
 * struct cfg80211_scan_request - scan request description
 *
 * @ssids: SSIDs to scan for (active scan only)
 * @n_ssids: number of SSIDs
 * @channels: channels to scan on.
963
 * @n_channels: total number of channels to scan
964 965
 * @ie: optional information element(s) to add into Probe Request or %NULL
 * @ie_len: length of ie in octets
966
 * @rates: bitmap of rates to advertise for each band
967
 * @wiphy: the wiphy this was for
968
 * @dev: the interface
Johannes Berg's avatar
Johannes Berg committed
969
 * @aborted: (internal) scan request was notified as aborted
970
 * @no_cck: used to send probe requests at non CCK rate in 2GHz band
971 972 973 974 975
 */
struct cfg80211_scan_request {
	struct cfg80211_ssid *ssids;
	int n_ssids;
	u32 n_channels;
976
	const u8 *ie;
977
	size_t ie_len;
978

979 980
	u32 rates[IEEE80211_NUM_BANDS];

981 982
	/* internal */
	struct wiphy *wiphy;
983
	struct net_device *dev;
Johannes Berg's avatar
Johannes Berg committed
984
	bool aborted;
985
	bool no_cck;
986 987 988

	/* keep last */
	struct ieee80211_channel *channels[0];
989 990
};

991 992 993 994 995 996 997 998 999
/**
 * struct cfg80211_match_set - sets of attributes to match
 *
 * @ssid: SSID to be matched
 */
struct cfg80211_match_set {
	struct cfg80211_ssid ssid;
};

1000 1001 1002 1003 1004 1005
/**
 * struct cfg80211_sched_scan_request - scheduled scan request description
 *
 * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
 * @n_ssids: number of SSIDs
 * @n_channels: total number of channels to scan
1006
 * @interval: interval between each scheduled scan cycle
1007 1008
 * @ie: optional information element(s) to add into Probe Request or %NULL
 * @ie_len: length of ie in octets
1009 1010 1011 1012 1013
 * @match_sets: sets of parameters to be matched for a scan result
 * 	entry to be considered valid and to be passed to the host
 * 	(others are filtered out).
 *	If ommited, all results are passed.
 * @n_match_sets: number of match sets
1014 1015 1016 1017 1018 1019 1020 1021
 * @wiphy: the wiphy this was for
 * @dev: the interface
 * @channels: channels to scan
 */
struct cfg80211_sched_scan_request {
	struct cfg80211_ssid *ssids;
	int n_ssids;
	u32 n_channels;
1022
	u32 interval;
1023 1024
	const u8 *ie;
	size_t ie_len;
1025 1026
	struct cfg80211_match_set *match_sets;
	int n_match_sets;
1027 1028 1029 1030 1031 1032 1033 1034 1035

	/* internal */
	struct wiphy *wiphy;
	struct net_device *dev;

	/* keep last */
	struct ieee80211_channel *channels[0];
};

1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054
/**
 * enum cfg80211_signal_type - signal type
 *
 * @CFG80211_SIGNAL_TYPE_NONE: no signal strength information available
 * @CFG80211_SIGNAL_TYPE_MBM: signal strength in mBm (100*dBm)
 * @CFG80211_SIGNAL_TYPE_UNSPEC: signal strength, increasing from 0 through 100
 */
enum cfg80211_signal_type {
	CFG80211_SIGNAL_TYPE_NONE,
	CFG80211_SIGNAL_TYPE_MBM,
	CFG80211_SIGNAL_TYPE_UNSPEC,
};

/**
 * struct cfg80211_bss - BSS description
 *
 * This structure describes a BSS (which may also be a mesh network)
 * for use in scan results and similar.
 *
Johannes Berg's avatar
Johannes Berg committed
1055
 * @channel: channel this BSS is on
1056 1057 1058 1059 1060
 * @bssid: BSSID of the BSS
 * @tsf: timestamp of last received update
 * @beacon_interval: the beacon interval as from the frame
 * @capability: the capability field in host byte order
 * @information_elements: the information elements (Note that there
1061 1062 1063
 *	is no guarantee that these are well-formed!); this is a pointer to
 *	either the beacon_ies or proberesp_ies depending on whether Probe
 *	Response frame has been received
1064
 * @len_information_elements: total length of the information elements
1065 1066 1067 1068
 * @beacon_ies: the information elements from the last Beacon frame
 * @len_beacon_ies: total length of the beacon_ies
 * @proberesp_ies: the information elements from the last Probe Response frame
 * @len_proberesp_ies: total length of the proberesp_ies
Johannes Berg's avatar
Johannes Berg committed
1069
 * @signal: signal strength value (type depends on the wiphy's signal_type)
1070
 * @free_priv: function pointer to free private data
1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081
 * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes
 */
struct cfg80211_bss {
	struct ieee80211_channel *channel;

	u8 bssid[ETH_ALEN];
	u64 tsf;
	u16 beacon_interval;
	u16 capability;
	u8 *information_elements;
	size_t len_information_elements;
1082 1083 1084 1085
	u8 *beacon_ies;
	size_t len_beacon_ies;
	u8 *proberesp_ies;
	size_t len_proberesp_ies;
1086 1087 1088

	s32 signal;

1089
	void (*free_priv)(struct cfg80211_bss *bss);
1090 1091 1092
	u8 priv[0] __attribute__((__aligned__(sizeof(void *))));
};

1093 1094 1095 1096 1097 1098 1099 1100 1101
/**
 * ieee80211_bss_get_ie - find IE with given ID
 * @bss: the bss to search
 * @ie: the IE ID
 * Returns %NULL if not found.
 */
const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);


1102 1103 1104 1105 1106
/**
 * struct cfg80211_auth_request - Authentication request data
 *
 * This structure provides information needed to complete IEEE 802.11
 * authentication.
Johannes Berg's avatar
Johannes Berg committed
1107 1108
 *
 * @bss: The BSS to authenticate with.
1109 1110 1111
 * @auth_type: Authentication type (algorithm)
 * @ie: Extra IEs to add to Authentication frame or %NULL
 * @ie_len: Length of ie buffer in octets
Johannes Berg's avatar
Johannes Berg committed
1112 1113 1114
 * @key_len: length of WEP key for shared key authentication
 * @key_idx: index of WEP key for shared key authentication
 * @key: WEP key for shared key authentication
1115 1116
 */
struct cfg80211_auth_request {
Johannes Berg's avatar
Johannes Berg committed
1117
	struct cfg80211_bss *bss;
1118 1119
	const u8 *ie;
	size_t ie_len;
Johannes Berg's avatar
Johannes Berg committed
1120
	enum nl80211_auth_type auth_type;
Johannes Berg's avatar
Johannes Berg committed
1121 1122
	const u8 *key;
	u8 key_len, key_idx;
1123 1124
};

1125 1126 1127 1128 1129 1130 1131 1132 1133
/**
 * enum cfg80211_assoc_req_flags - Over-ride default behaviour in association.
 *
 * @ASSOC_REQ_DISABLE_HT:  Disable HT (802.11n)
 */
enum cfg80211_assoc_req_flags {
	ASSOC_REQ_DISABLE_HT		= BIT(0),
};

1134 1135 1136 1137 1138
/**
 * struct cfg80211_assoc_request - (Re)Association request data
 *
 * This structure provides information needed to complete IEEE 802.11
 * (re)association.
1139 1140 1141 1142 1143
 * @bss: The BSS to associate with. If the call is successful the driver
 *	is given a reference that it must release, normally via a call to
 *	cfg80211_send_rx_assoc(), or, if association timed out, with a
 *	call to cfg80211_put_bss() (in addition to calling
 *	cfg80211_send_assoc_timeout())
1144 1145
 * @ie: Extra IEs to add to (Re)Association Request frame or %NULL
 * @ie_len: Length of ie buffer in octets
1146
 * @use_mfp: Use management frame protection (IEEE 802.11w) in this association
1147
 * @crypto: crypto settings
1148
 * @prev_bssid: previous BSSID, if not %NULL use reassociate frame
1149 1150 1151 1152
 * @flags:  See &enum cfg80211_assoc_req_flags
 * @ht_capa:  HT Capabilities over-rides.  Values set in ht_capa_mask
 *   will be used in ht_capa.  Un-supported values will be ignored.
 * @ht_capa_mask:  The bits of ht_capa which are to be used.
1153 1154
 */
struct cfg80211_assoc_request {
Johannes Berg's avatar
Johannes Berg committed
1155
	struct cfg80211_bss *bss;
1156
	const u8 *ie, *prev_bssid;
1157
	size_t ie_len;
1158
	struct cfg80211_crypto_settings crypto;
Johannes Berg's avatar
Johannes Berg committed
1159
	bool use_mfp;
1160 1161 1162
	u32 flags;
	struct ieee80211_ht_cap ht_capa;
	struct ieee80211_ht_cap ht_capa_mask;
1163 1164 1165 1166 1167 1168 1169 1170
};

/**
 * struct cfg80211_deauth_request - Deauthentication request data
 *
 * This structure provides information needed to complete IEEE 802.11
 * deauthentication.
 *
1171
 * @bssid: the BSSID of the BSS to deauthenticate from
1172 1173
 * @ie: Extra IEs to add to Deauthentication frame or %NULL
 * @ie_len: Length of ie buffer in octets
Johannes Berg's avatar
Johannes Berg committed
1174
 * @reason_code: The reason code for the deauthentication
1175 1176
 */
struct cfg80211_deauth_request {
1177
	const u8 *bssid;
1178 1179
	const u8 *ie;
	size_t ie_len;
Johannes Berg's avatar
Johannes Berg committed
1180
	u16 reason_code;
1181 1182 1183 1184 1185 1186 1187 1188
};

/**
 * struct cfg80211_disassoc_request - Disassociation request data
 *
 * This structure provides information needed to complete IEEE 802.11
 * disassocation.
 *
Johannes Berg's avatar
Johannes Berg committed
1189
 * @bss: the BSS to disassociate from
1190 1191
 * @ie: Extra IEs to add to Disassociation frame or %NULL
 * @ie_len: Length of ie buffer in octets
Johannes Berg's avatar
Johannes Berg committed
1192
 * @reason_code: The reason code for the disassociation
1193 1194
 * @local_state_change: This is a request for a local state only, i.e., no
 *	Disassociation frame is to be transmitted.
1195 1196
 */
struct cfg80211_disassoc_request {
Johannes Berg's avatar
Johannes Berg committed
1197
	struct cfg80211_bss *bss;
1198 1199
	const u8 *ie;
	size_t ie_len;
Johannes Berg's avatar
Johannes Berg committed
1200
	u16 reason_code;
1201
	bool local_state_change;
1202 1203
};

Johannes Berg's avatar
Johannes Berg committed
1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214
/**
 * struct cfg80211_ibss_params - IBSS parameters
 *
 * This structure defines the IBSS parameters for the join_ibss()
 * method.
 *
 * @ssid: The SSID, will always be non-null.
 * @ssid_len: The length of the SSID, will always be non-zero.
 * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not
 *	search for IBSSs with a different BSSID.
 * @channel: The channel to use if no IBSS can be found to join.
1215
 * @channel_type: channel type (HT mode)
Johannes Berg's avatar
Johannes Berg committed
1216 1217 1218 1219
 * @channel_fixed: The channel should be fixed -- do not search for
 *	IBSSs to join on other channels.
 * @ie: information element(s) to include in the beacon
 * @ie_len: length of that
1220
 * @beacon_interval: beacon interval to use
Johannes Berg's avatar
Johannes Berg committed
1221 1222
 * @privacy: this is a protected network, keys will be configured
 *	after joining
1223 1224 1225 1226
 * @control_port: whether user space controls IEEE 802.1X port, i.e.,
 *	sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
 *	required to assume that the port is unauthorized until authorized by
 *	user space. Otherwise, port is marked authorized by default.
1227
 * @basic_rates: bitmap of basic rates to use when creating the IBSS
1228
 * @mcast_rate: per-band multicast rate index + 1 (0: disabled)
Johannes Berg's avatar
Johannes Berg committed
1229 1230 1231 1232 1233
 */
struct cfg80211_ibss_params {
	u8 *ssid;
	u8 *bssid;
	struct ieee80211_channel *channel;
1234
	enum nl80211_channel_type channel_type;
Johannes Berg's avatar
Johannes Berg committed
1235 1236
	u8 *ie;
	u8 ssid_len, ie_len;