sl82c105.c 11 KB
Newer Older
Linus Torvalds's avatar
Linus Torvalds committed
1 2 3 4 5 6 7 8 9 10 11 12 13
/*
 * linux/drivers/ide/pci/sl82c105.c
 *
 * SL82C105/Winbond 553 IDE driver
 *
 * Maintainer unknown.
 *
 * Drive tuning added from Rebel.com's kernel sources
 *  -- Russell King (15/11/98) linux@arm.linux.org.uk
 * 
 * Merge in Russell's HW workarounds, fix various problems
 * with the timing registers setup.
 *  -- Benjamin Herrenschmidt (01/11/03) benh@kernel.crashing.org
14 15
 *
 * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
Linus Torvalds's avatar
Linus Torvalds committed
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
 */

#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/pci.h>
#include <linux/ide.h>

#include <asm/io.h>
#include <asm/dma.h>

#undef DEBUG

#ifdef DEBUG
#define DBG(arg) printk arg
#else
#define DBG(fmt,...)
#endif
/*
 * SL82C105 PCI config register 0x40 bits.
 */
#define CTRL_IDE_IRQB   (1 << 30)
#define CTRL_IDE_IRQA   (1 << 28)
#define CTRL_LEGIRQ     (1 << 11)
#define CTRL_P1F16      (1 << 5)
#define CTRL_P1EN       (1 << 4)
#define CTRL_P0F16      (1 << 1)
#define CTRL_P0EN       (1 << 0)

/*
52 53
 * Convert a PIO mode and cycle time to the required on/off times
 * for the interface.  This has protection against runaway timings.
Linus Torvalds's avatar
Linus Torvalds committed
54
 */
55
static unsigned int get_pio_timings(ide_pio_data_t *p)
Linus Torvalds's avatar
Linus Torvalds committed
56
{
57
	unsigned int cmd_on, cmd_off;
Linus Torvalds's avatar
Linus Torvalds committed
58

59
	cmd_on  = (ide_pio_timings[p->pio_mode].active_time + 29) / 30;
Linus Torvalds's avatar
Linus Torvalds committed
60 61 62 63 64 65 66 67 68 69 70 71
	cmd_off = (p->cycle_time - 30 * cmd_on + 29) / 30;

	if (cmd_on == 0)
		cmd_on = 1;

	if (cmd_off == 0)
		cmd_off = 1;

	return (cmd_on - 1) << 8 | (cmd_off - 1) | (p->use_iordy ? 0x40 : 0x00);
}

/*
72
 * Configure the chipset for PIO mode.
Linus Torvalds's avatar
Linus Torvalds committed
73
 */
74
static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio)
Linus Torvalds's avatar
Linus Torvalds committed
75
{
76 77
	struct pci_dev *dev	= HWIF(drive)->pci_dev;
	int reg			= 0x44 + drive->dn * 4;
Linus Torvalds's avatar
Linus Torvalds committed
78
	ide_pio_data_t p;
79
	u16 drv_ctrl;
Linus Torvalds's avatar
Linus Torvalds committed
80

81
	DBG(("sl82c105_tune_pio(drive:%s, pio:%u)\n", drive->name, pio));
Linus Torvalds's avatar
Linus Torvalds committed
82 83 84

	pio = ide_get_best_pio_mode(drive, pio, 5, &p);

85
	drive->drive_data = drv_ctrl = get_pio_timings(&p);
Linus Torvalds's avatar
Linus Torvalds committed
86

87
	if (!drive->using_dma) {
Linus Torvalds's avatar
Linus Torvalds committed
88 89 90 91
		/*
		 * If we are actually using MW DMA, then we can not
		 * reprogram the interface drive control register.
		 */
92 93
		pci_write_config_word(dev, reg,  drv_ctrl);
		pci_read_config_word (dev, reg, &drv_ctrl);
Linus Torvalds's avatar
Linus Torvalds committed
94
	}
95 96 97 98 99

	printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name,
	       ide_xfer_verbose(pio + XFER_PIO_0), p.cycle_time, drv_ctrl);

	return pio;
Linus Torvalds's avatar
Linus Torvalds committed
100 101 102
}

/*
103 104
 * Configure the drive for DMA.
 * We'll program the chipset only when DMA is actually turned on.
Linus Torvalds's avatar
Linus Torvalds committed
105
 */
106
static int config_for_dma(ide_drive_t *drive)
Linus Torvalds's avatar
Linus Torvalds committed
107 108 109 110
{
	DBG(("config_for_dma(drive:%s)\n", drive->name));

	if (ide_config_drive_speed(drive, XFER_MW_DMA_2) != 0)
111
		return 0;
Linus Torvalds's avatar
Linus Torvalds committed
112

113
	return ide_dma_enable(drive);
Linus Torvalds's avatar
Linus Torvalds committed
114 115 116
}

/*
117
 * Check to see if the drive and chipset are capable of DMA mode.
Linus Torvalds's avatar
Linus Torvalds committed
118
 */
119
static int sl82c105_ide_dma_check(ide_drive_t *drive)
Linus Torvalds's avatar
Linus Torvalds committed
120
{
121
	DBG(("sl82c105_ide_dma_check(drive:%s)\n", drive->name));
Linus Torvalds's avatar
Linus Torvalds committed
122

123 124
	if (ide_use_dma(drive) && config_for_dma(drive))
		return 0;
Linus Torvalds's avatar
Linus Torvalds committed
125

126
	return -1;
Linus Torvalds's avatar
Linus Torvalds committed
127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152
}

/*
 * The SL82C105 holds off all IDE interrupts while in DMA mode until
 * all DMA activity is completed.  Sometimes this causes problems (eg,
 * when the drive wants to report an error condition).
 *
 * 0x7e is a "chip testing" register.  Bit 2 resets the DMA controller
 * state machine.  We need to kick this to work around various bugs.
 */
static inline void sl82c105_reset_host(struct pci_dev *dev)
{
	u16 val;

	pci_read_config_word(dev, 0x7e, &val);
	pci_write_config_word(dev, 0x7e, val | (1 << 2));
	pci_write_config_word(dev, 0x7e, val & ~(1 << 2));
}

/*
 * If we get an IRQ timeout, it might be that the DMA state machine
 * got confused.  Fix from Todd Inglett.  Details from Winbond.
 *
 * This function is called when the IDE timer expires, the drive
 * indicates that it is READY, and we were waiting for DMA to complete.
 */
153
static int sl82c105_ide_dma_lostirq(ide_drive_t *drive)
Linus Torvalds's avatar
Linus Torvalds committed
154
{
155 156 157 158
	ide_hwif_t *hwif	= HWIF(drive);
	struct pci_dev *dev	= hwif->pci_dev;
	u32 val, mask		= hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA;
	u8 dma_cmd;
Linus Torvalds's avatar
Linus Torvalds committed
159

160
	printk("sl82c105: lost IRQ, resetting host\n");
Linus Torvalds's avatar
Linus Torvalds committed
161 162 163 164 165 166 167 168 169 170 171 172

	/*
	 * Check the raw interrupt from the drive.
	 */
	pci_read_config_dword(dev, 0x40, &val);
	if (val & mask)
		printk("sl82c105: drive was requesting IRQ, but host lost it\n");

	/*
	 * Was DMA enabled?  If so, disable it - we're resetting the
	 * host.  The IDE layer will be handling the drive for us.
	 */
173 174 175
	dma_cmd = inb(hwif->dma_command);
	if (dma_cmd & 1) {
		outb(dma_cmd & ~1, hwif->dma_command);
Linus Torvalds's avatar
Linus Torvalds committed
176 177 178 179 180
		printk("sl82c105: DMA was enabled\n");
	}

	sl82c105_reset_host(dev);

181
	/* __ide_dma_lostirq would return 1, so we do as well */
Linus Torvalds's avatar
Linus Torvalds committed
182 183 184 185 186 187 188 189 190 191 192
	return 1;
}

/*
 * ATAPI devices can cause the SL82C105 DMA state machine to go gaga.
 * Winbond recommend that the DMA state machine is reset prior to
 * setting the bus master DMA enable bit.
 *
 * The generic IDE core will have disabled the BMEN bit before this
 * function is called.
 */
193
static void sl82c105_dma_start(ide_drive_t *drive)
Linus Torvalds's avatar
Linus Torvalds committed
194
{
195 196
	ide_hwif_t *hwif	= HWIF(drive);
	struct pci_dev *dev	= hwif->pci_dev;
Linus Torvalds's avatar
Linus Torvalds committed
197 198 199 200 201 202 203

	sl82c105_reset_host(dev);
	ide_dma_start(drive);
}

static int sl82c105_ide_dma_timeout(ide_drive_t *drive)
{
204 205
	ide_hwif_t *hwif	= HWIF(drive);
	struct pci_dev *dev	= hwif->pci_dev;
Linus Torvalds's avatar
Linus Torvalds committed
206 207 208 209 210 211 212

	DBG(("sl82c105_ide_dma_timeout(drive:%s)\n", drive->name));

	sl82c105_reset_host(dev);
	return __ide_dma_timeout(drive);
}

213
static int sl82c105_ide_dma_on(ide_drive_t *drive)
Linus Torvalds's avatar
Linus Torvalds committed
214
{
215 216 217
	struct pci_dev *dev	= HWIF(drive)->pci_dev;
	int rc, reg 		= 0x44 + drive->dn * 4;

Linus Torvalds's avatar
Linus Torvalds committed
218 219
	DBG(("sl82c105_ide_dma_on(drive:%s)\n", drive->name));

220 221 222 223 224 225 226
	rc = __ide_dma_on(drive);
	if (rc == 0) {
		pci_write_config_word(dev, reg, 0x0200);

		printk(KERN_INFO "%s: DMA enabled\n", drive->name);
	}
	return rc;
Linus Torvalds's avatar
Linus Torvalds committed
227 228
}

229
static void sl82c105_dma_off_quietly(ide_drive_t *drive)
Linus Torvalds's avatar
Linus Torvalds committed
230
{
231 232
	struct pci_dev *dev	= HWIF(drive)->pci_dev;
	int reg 		= 0x44 + drive->dn * 4;
Linus Torvalds's avatar
Linus Torvalds committed
233

234 235
	DBG(("sl82c105_dma_off_quietly(drive:%s)\n", drive->name));

236 237
	pci_write_config_word(dev, reg, drive->drive_data);

238
	ide_dma_off_quietly(drive);
Linus Torvalds's avatar
Linus Torvalds committed
239 240 241 242 243 244 245 246 247 248 249
}

/*
 * Ok, that is nasty, but we must make sure the DMA timings
 * won't be used for a PIO access. The solution here is
 * to make sure the 16 bits mode is diabled on the channel
 * when DMA is enabled, thus causing the chip to use PIO0
 * timings for those operations.
 */
static void sl82c105_selectproc(ide_drive_t *drive)
{
250 251
	ide_hwif_t *hwif	= HWIF(drive);
	struct pci_dev *dev	= hwif->pci_dev;
Linus Torvalds's avatar
Linus Torvalds committed
252 253 254 255 256
	u32 val, old, mask;

	//DBG(("sl82c105_selectproc(drive:%s)\n", drive->name));

	mask = hwif->channel ? CTRL_P1F16 : CTRL_P0F16;
257
	old = val = (u32)pci_get_drvdata(dev);
Linus Torvalds's avatar
Linus Torvalds committed
258 259 260 261 262 263
	if (drive->using_dma)
		val &= ~mask;
	else
		val |= mask;
	if (old != val) {
		pci_write_config_dword(dev, 0x40, val);	
264
		pci_set_drvdata(dev, (void *)val);
Linus Torvalds's avatar
Linus Torvalds committed
265 266 267 268 269 270 271 272 273
	}
}

/*
 * ATA reset will clear the 16 bits mode in the control
 * register, we need to update our cache
 */
static void sl82c105_resetproc(ide_drive_t *drive)
{
274
	struct pci_dev *dev = HWIF(drive)->pci_dev;
Linus Torvalds's avatar
Linus Torvalds committed
275 276 277 278 279
	u32 val;

	DBG(("sl82c105_resetproc(drive:%s)\n", drive->name));

	pci_read_config_dword(dev, 0x40, &val);
280
	pci_set_drvdata(dev, (void *)val);
Linus Torvalds's avatar
Linus Torvalds committed
281 282 283 284 285 286
}
	
/*
 * We only deal with PIO mode here - DMA mode 'using_dma' is not
 * initialised at the point that this function is called.
 */
287
static void sl82c105_tune_drive(ide_drive_t *drive, u8 pio)
Linus Torvalds's avatar
Linus Torvalds committed
288
{
289
	DBG(("sl82c105_tune_drive(drive:%s, pio:%u)\n", drive->name, pio));
Linus Torvalds's avatar
Linus Torvalds committed
290

291 292
	pio = sl82c105_tune_pio(drive, pio);
	(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
Linus Torvalds's avatar
Linus Torvalds committed
293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335
}

/*
 * Return the revision of the Winbond bridge
 * which this function is part of.
 */
static unsigned int sl82c105_bridge_revision(struct pci_dev *dev)
{
	struct pci_dev *bridge;
	u8 rev;

	/*
	 * The bridge should be part of the same device, but function 0.
	 */
	bridge = pci_find_slot(dev->bus->number,
			       PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
	if (!bridge)
		return -1;

	/*
	 * Make sure it is a Winbond 553 and is an ISA bridge.
	 */
	if (bridge->vendor != PCI_VENDOR_ID_WINBOND ||
	    bridge->device != PCI_DEVICE_ID_WINBOND_83C553 ||
	    bridge->class >> 8 != PCI_CLASS_BRIDGE_ISA)
		return -1;

	/*
	 * We need to find function 0's revision, not function 1
	 */
	pci_read_config_byte(bridge, PCI_REVISION_ID, &rev);

	return rev;
}

/*
 * Enable the PCI device
 * 
 * --BenH: It's arch fixup code that should enable channels that
 * have not been enabled by firmware. I decided we can still enable
 * channel 0 here at least, but channel 1 has to be enabled by
 * firmware or arch code. We still set both to 16 bits mode.
 */
336
static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const char *msg)
Linus Torvalds's avatar
Linus Torvalds committed
337 338 339 340 341 342 343 344
{
	u32 val;

	DBG(("init_chipset_sl82c105()\n"));

	pci_read_config_dword(dev, 0x40, &val);
	val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
	pci_write_config_dword(dev, 0x40, val);
345
	pci_set_drvdata(dev, (void *)val);
Linus Torvalds's avatar
Linus Torvalds committed
346 347 348 349 350

	return dev->irq;
}

/*
351
 * Initialise IDE channel
Linus Torvalds's avatar
Linus Torvalds committed
352
 */
353
static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
Linus Torvalds's avatar
Linus Torvalds committed
354
{
355
	unsigned int rev;
356

Linus Torvalds's avatar
Linus Torvalds committed
357 358
	DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index));

359 360 361 362 363 364 365 366 367 368
	hwif->tuneproc		= &sl82c105_tune_drive;
	hwif->selectproc	= &sl82c105_selectproc;
	hwif->resetproc 	= &sl82c105_resetproc;

	/*
	 * We support 32-bit I/O on this interface, and
	 * it doesn't have problems with interrupts.
	 */
	hwif->drives[0].io_32bit = hwif->drives[1].io_32bit = 1;
	hwif->drives[0].unmask   = hwif->drives[1].unmask   = 1;
369 370 371 372 373

	/*
	 * We always autotune PIO,  this is done before DMA is checked,
	 * so there's no risk of accidentally disabling DMA
	 */
374
	hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
Linus Torvalds's avatar
Linus Torvalds committed
375 376 377 378

	if (!hwif->dma_base)
		return;

379 380 381 382 383 384
	rev = sl82c105_bridge_revision(hwif->pci_dev);
	if (rev <= 5) {
		/*
		 * Never ever EVER under any circumstances enable
		 * DMA when the bridge is this old.
		 */
385 386 387
		printk("    %s: Winbond W83C553 bridge revision %d, "
		       "BM-DMA disabled\n", hwif->name, rev);
		return;
388
	}
389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405

	hwif->atapi_dma  = 1;
	hwif->mwdma_mask = 0x04;

	hwif->ide_dma_check		= &sl82c105_ide_dma_check;
	hwif->ide_dma_on		= &sl82c105_ide_dma_on;
	hwif->dma_off_quietly		= &sl82c105_dma_off_quietly;
	hwif->ide_dma_lostirq		= &sl82c105_ide_dma_lostirq;
	hwif->dma_start			= &sl82c105_dma_start;
	hwif->ide_dma_timeout		= &sl82c105_ide_dma_timeout;

	if (!noautodma)
		hwif->autodma = 1;
	hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;

	if (hwif->mate)
		hwif->serialized = hwif->mate->serialized = 1;
Linus Torvalds's avatar
Linus Torvalds committed
406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423
}

static ide_pci_device_t sl82c105_chipset __devinitdata = {
	.name		= "W82C105",
	.init_chipset	= init_chipset_sl82c105,
	.init_hwif	= init_hwif_sl82c105,
	.channels	= 2,
	.autodma	= NOAUTODMA,
	.enablebits	= {{0x40,0x01,0x01}, {0x40,0x10,0x10}},
	.bootable	= ON_BOARD,
};

static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
	return ide_setup_pci_device(dev, &sl82c105_chipset);
}

static struct pci_device_id sl82c105_pci_tbl[] = {
424
	{ PCI_DEVICE(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105), 0},
Linus Torvalds's avatar
Linus Torvalds committed
425 426 427 428 429 430 431 432 433 434
	{ 0, },
};
MODULE_DEVICE_TABLE(pci, sl82c105_pci_tbl);

static struct pci_driver driver = {
	.name		= "W82C105_IDE",
	.id_table	= sl82c105_pci_tbl,
	.probe		= sl82c105_init_one,
};

435
static int __init sl82c105_ide_init(void)
Linus Torvalds's avatar
Linus Torvalds committed
436 437 438 439 440 441 442 443
{
	return ide_pci_register_driver(&driver);
}

module_init(sl82c105_ide_init);

MODULE_DESCRIPTION("PCI driver module for W82C105 IDE");
MODULE_LICENSE("GPL");