core.c 70.4 KB
Newer Older
Linus Torvalds's avatar
Linus Torvalds committed
1
/*
2
 *  linux/drivers/mmc/core/core.c
Linus Torvalds's avatar
Linus Torvalds committed
3 4
 *
 *  Copyright (C) 2003-2004 Russell King, All Rights Reserved.
5
 *  SD support Copyright (C) 2004 Ian Molton, All Rights Reserved.
6
 *  Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
7
 *  MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved.
Linus Torvalds's avatar
Linus Torvalds committed
8 9 10 11 12 13 14 15 16 17 18 19 20
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/completion.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/pagemap.h>
#include <linux/err.h>
Pierre Ossman's avatar
Pierre Ossman committed
21
#include <linux/leds.h>
Pierre Ossman's avatar
Pierre Ossman committed
22
#include <linux/scatterlist.h>
23
#include <linux/log2.h>
David Brownell's avatar
David Brownell committed
24
#include <linux/regulator/consumer.h>
25
#include <linux/pm_runtime.h>
26
#include <linux/pm_wakeup.h>
27
#include <linux/suspend.h>
28 29
#include <linux/fault-inject.h>
#include <linux/random.h>
30
#include <linux/slab.h>
31
#include <linux/of.h>
Linus Torvalds's avatar
Linus Torvalds committed
32 33 34

#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
Pierre Ossman's avatar
Pierre Ossman committed
35 36
#include <linux/mmc/mmc.h>
#include <linux/mmc/sd.h>
37
#include <linux/mmc/slot-gpio.h>
Linus Torvalds's avatar
Linus Torvalds committed
38

39
#include "core.h"
40 41
#include "bus.h"
#include "host.h"
Pierre Ossman's avatar
Pierre Ossman committed
42
#include "sdio_bus.h"
43
#include "pwrseq.h"
Pierre Ossman's avatar
Pierre Ossman committed
44 45 46

#include "mmc_ops.h"
#include "sd_ops.h"
Pierre Ossman's avatar
Pierre Ossman committed
47
#include "sdio_ops.h"
Linus Torvalds's avatar
Linus Torvalds committed
48

49 50 51
/* If the device is not responding */
#define MMC_CORE_TIMEOUT_MS	(10 * 60 * 1000) /* 10 minute timeout */

52 53 54 55 56 57
/*
 * Background operations can take a long time, depending on the housekeeping
 * operations the card has to perform.
 */
#define MMC_BKOPS_MAX_TIMEOUT	(4 * 60 * 1000) /* max time to wait in ms */

58
static struct workqueue_struct *workqueue;
59
static const unsigned freqs[] = { 400000, 300000, 200000, 100000 };
60

David Brownell's avatar
David Brownell committed
61 62 63 64 65
/*
 * Enabling software CRCs on the data blocks can be a significant (30%)
 * performance cost, and for other reasons may not always be desired.
 * So we allow it it to be disabled.
 */
66
bool use_spi_crc = 1;
David Brownell's avatar
David Brownell committed
67 68
module_param(use_spi_crc, bool, 0);

69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85
/*
 * Internal function. Schedule delayed work in the MMC work queue.
 */
static int mmc_schedule_delayed_work(struct delayed_work *work,
				     unsigned long delay)
{
	return queue_delayed_work(workqueue, work, delay);
}

/*
 * Internal function. Flush all scheduled work from the MMC work queue.
 */
static void mmc_flush_scheduled_work(void)
{
	flush_workqueue(workqueue);
}

86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109
#ifdef CONFIG_FAIL_MMC_REQUEST

/*
 * Internal function. Inject random data errors.
 * If mmc_data is NULL no errors are injected.
 */
static void mmc_should_fail_request(struct mmc_host *host,
				    struct mmc_request *mrq)
{
	struct mmc_command *cmd = mrq->cmd;
	struct mmc_data *data = mrq->data;
	static const int data_errors[] = {
		-ETIMEDOUT,
		-EILSEQ,
		-EIO,
	};

	if (!data)
		return;

	if (cmd->error || data->error ||
	    !should_fail(&host->fail_mmc_request, data->blksz * data->blocks))
		return;

110 111
	data->error = data_errors[prandom_u32() % ARRAY_SIZE(data_errors)];
	data->bytes_xfered = (prandom_u32() % (data->bytes_xfered >> 9)) << 9;
112 113 114 115 116 117 118 119 120 121 122
}

#else /* CONFIG_FAIL_MMC_REQUEST */

static inline void mmc_should_fail_request(struct mmc_host *host,
					   struct mmc_request *mrq)
{
}

#endif /* CONFIG_FAIL_MMC_REQUEST */

Linus Torvalds's avatar
Linus Torvalds committed
123
/**
124 125 126
 *	mmc_request_done - finish processing an MMC request
 *	@host: MMC host which completed request
 *	@mrq: MMC request which request
Linus Torvalds's avatar
Linus Torvalds committed
127 128
 *
 *	MMC drivers should call this function when they have completed
129
 *	their processing of a request.
Linus Torvalds's avatar
Linus Torvalds committed
130 131 132 133
 */
void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
{
	struct mmc_command *cmd = mrq->cmd;
134 135
	int err = cmd->error;

136
	/* Flag re-tuning needed on CRC errors */
137 138 139
	if ((cmd->opcode != MMC_SEND_TUNING_BLOCK &&
	    cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) &&
	    (err == -EILSEQ || (mrq->sbc && mrq->sbc->error == -EILSEQ) ||
140
	    (mrq->data && mrq->data->error == -EILSEQ) ||
141
	    (mrq->stop && mrq->stop->error == -EILSEQ)))
142 143
		mmc_retune_needed(host);

David Brownell's avatar
David Brownell committed
144 145 146 147 148
	if (err && cmd->retries && mmc_host_is_spi(host)) {
		if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND)
			cmd->retries = 0;
	}

149
	if (err && cmd->retries && !mmc_card_removed(host->card)) {
150 151 152 153 154 155
		/*
		 * Request starter must handle retries - see
		 * mmc_wait_for_req_done().
		 */
		if (mrq->done)
			mrq->done(mrq);
156
	} else {
157 158
		mmc_should_fail_request(host, mrq);

Pierre Ossman's avatar
Pierre Ossman committed
159 160
		led_trigger_event(host->led, LED_OFF);

161 162 163 164 165 166 167 168
		if (mrq->sbc) {
			pr_debug("%s: req done <CMD%u>: %d: %08x %08x %08x %08x\n",
				mmc_hostname(host), mrq->sbc->opcode,
				mrq->sbc->error,
				mrq->sbc->resp[0], mrq->sbc->resp[1],
				mrq->sbc->resp[2], mrq->sbc->resp[3]);
		}

169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189
		pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
			mmc_hostname(host), cmd->opcode, err,
			cmd->resp[0], cmd->resp[1],
			cmd->resp[2], cmd->resp[3]);

		if (mrq->data) {
			pr_debug("%s:     %d bytes transferred: %d\n",
				mmc_hostname(host),
				mrq->data->bytes_xfered, mrq->data->error);
		}

		if (mrq->stop) {
			pr_debug("%s:     (CMD%u): %d: %08x %08x %08x %08x\n",
				mmc_hostname(host), mrq->stop->opcode,
				mrq->stop->error,
				mrq->stop->resp[0], mrq->stop->resp[1],
				mrq->stop->resp[2], mrq->stop->resp[3]);
		}

		if (mrq->done)
			mrq->done(mrq);
Linus Torvalds's avatar
Linus Torvalds committed
190 191 192 193 194
	}
}

EXPORT_SYMBOL(mmc_request_done);

195 196 197 198 199 200 201 202 203 204 205 206
static void __mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
{
	int err;

	/* Assumes host controller has been runtime resumed by mmc_claim_host */
	err = mmc_retune(host);
	if (err) {
		mrq->cmd->error = err;
		mmc_request_done(host, mrq);
		return;
	}

207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223
	/*
	 * For sdio rw commands we must wait for card busy otherwise some
	 * sdio devices won't work properly.
	 */
	if (mmc_is_io_op(mrq->cmd->opcode) && host->ops->card_busy) {
		int tries = 500; /* Wait aprox 500ms at maximum */

		while (host->ops->card_busy(host) && --tries)
			mmc_delay(1);

		if (tries == 0) {
			mrq->cmd->error = -EBUSY;
			mmc_request_done(host, mrq);
			return;
		}
	}

224 225 226
	host->ops->request(host, mrq);
}

227
static int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
Linus Torvalds's avatar
Linus Torvalds committed
228
{
Pierre Ossman's avatar
Pierre Ossman committed
229 230
#ifdef CONFIG_MMC_DEBUG
	unsigned int i, sz;
231
	struct scatterlist *sg;
Pierre Ossman's avatar
Pierre Ossman committed
232
#endif
233 234
	mmc_retune_hold(host);

235 236
	if (mmc_card_removed(host->card))
		return -ENOMEDIUM;
Pierre Ossman's avatar
Pierre Ossman committed
237

238 239 240 241 242 243
	if (mrq->sbc) {
		pr_debug("<%s: starting CMD%u arg %08x flags %08x>\n",
			 mmc_hostname(host), mrq->sbc->opcode,
			 mrq->sbc->arg, mrq->sbc->flags);
	}

244 245 246
	pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
		 mmc_hostname(host), mrq->cmd->opcode,
		 mrq->cmd->arg, mrq->cmd->flags);
Linus Torvalds's avatar
Linus Torvalds committed
247

248 249 250 251 252
	if (mrq->data) {
		pr_debug("%s:     blksz %d blocks %d flags %08x "
			"tsac %d ms nsac %d\n",
			mmc_hostname(host), mrq->data->blksz,
			mrq->data->blocks, mrq->data->flags,
253
			mrq->data->timeout_ns / 1000000,
254 255 256 257 258 259 260 261 262
			mrq->data->timeout_clks);
	}

	if (mrq->stop) {
		pr_debug("%s:     CMD%u arg %08x flags %08x\n",
			 mmc_hostname(host), mrq->stop->opcode,
			 mrq->stop->arg, mrq->stop->flags);
	}

Pierre Ossman's avatar
Pierre Ossman committed
263
	WARN_ON(!host->claimed);
Linus Torvalds's avatar
Linus Torvalds committed
264 265 266

	mrq->cmd->error = 0;
	mrq->cmd->mrq = mrq;
267 268 269 270
	if (mrq->sbc) {
		mrq->sbc->error = 0;
		mrq->sbc->mrq = mrq;
	}
Linus Torvalds's avatar
Linus Torvalds committed
271
	if (mrq->data) {
272
		BUG_ON(mrq->data->blksz > host->max_blk_size);
273 274 275
		BUG_ON(mrq->data->blocks > host->max_blk_count);
		BUG_ON(mrq->data->blocks * mrq->data->blksz >
			host->max_req_size);
276

Pierre Ossman's avatar
Pierre Ossman committed
277 278
#ifdef CONFIG_MMC_DEBUG
		sz = 0;
279 280
		for_each_sg(mrq->data->sg, sg, mrq->data->sg_len, i)
			sz += sg->length;
Pierre Ossman's avatar
Pierre Ossman committed
281 282 283
		BUG_ON(sz != mrq->data->blocks * mrq->data->blksz);
#endif

Linus Torvalds's avatar
Linus Torvalds committed
284 285 286 287 288 289 290 291 292
		mrq->cmd->data = mrq->data;
		mrq->data->error = 0;
		mrq->data->mrq = mrq;
		if (mrq->stop) {
			mrq->data->stop = mrq->stop;
			mrq->stop->error = 0;
			mrq->stop->mrq = mrq;
		}
	}
293
	led_trigger_event(host->led, LED_FULL);
294
	__mmc_start_request(host, mrq);
295 296

	return 0;
Linus Torvalds's avatar
Linus Torvalds committed
297 298
}

299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316
/**
 *	mmc_start_bkops - start BKOPS for supported cards
 *	@card: MMC card to start BKOPS
 *	@form_exception: A flag to indicate if this function was
 *			 called due to an exception raised by the card
 *
 *	Start background operations whenever requested.
 *	When the urgent BKOPS bit is set in a R1 command response
 *	then background operations should be started immediately.
*/
void mmc_start_bkops(struct mmc_card *card, bool from_exception)
{
	int err;
	int timeout;
	bool use_busy_signal;

	BUG_ON(!card);

317
	if (!card->ext_csd.man_bkops_en || mmc_card_doing_bkops(card))
318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342
		return;

	err = mmc_read_bkops_status(card);
	if (err) {
		pr_err("%s: Failed to read bkops status: %d\n",
		       mmc_hostname(card->host), err);
		return;
	}

	if (!card->ext_csd.raw_bkops_status)
		return;

	if (card->ext_csd.raw_bkops_status < EXT_CSD_BKOPS_LEVEL_2 &&
	    from_exception)
		return;

	mmc_claim_host(card->host);
	if (card->ext_csd.raw_bkops_status >= EXT_CSD_BKOPS_LEVEL_2) {
		timeout = MMC_BKOPS_MAX_TIMEOUT;
		use_busy_signal = true;
	} else {
		timeout = 0;
		use_busy_signal = false;
	}

343 344
	mmc_retune_hold(card->host);

345
	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
346 347
			EXT_CSD_BKOPS_START, 1, timeout,
			use_busy_signal, true, false);
348 349 350
	if (err) {
		pr_warn("%s: Error %d starting bkops\n",
			mmc_hostname(card->host), err);
351
		mmc_retune_release(card->host);
352 353 354 355 356 357 358 359 360 361
		goto out;
	}

	/*
	 * For urgent bkops status (LEVEL_2 and more)
	 * bkops executed synchronously, otherwise
	 * the operation is in progress
	 */
	if (!use_busy_signal)
		mmc_card_set_doing_bkops(card);
362 363
	else
		mmc_retune_release(card->host);
364 365 366 367 368
out:
	mmc_release_host(card->host);
}
EXPORT_SYMBOL(mmc_start_bkops);

369 370 371 372 373 374 375 376
/*
 * mmc_wait_data_done() - done callback for data request
 * @mrq: done data request
 *
 * Wakes up mmc context, passed as a callback to host controller driver
 */
static void mmc_wait_data_done(struct mmc_request *mrq)
{
377 378 379 380
	struct mmc_context_info *context_info = &mrq->host->context_info;

	context_info->is_done_rcv = true;
	wake_up_interruptible(&context_info->wait);
381 382
}

Linus Torvalds's avatar
Linus Torvalds committed
383 384
static void mmc_wait_done(struct mmc_request *mrq)
{
385 386 387
	complete(&mrq->completion);
}

388 389 390 391 392 393 394 395 396 397
/*
 *__mmc_start_data_req() - starts data request
 * @host: MMC host to start the request
 * @mrq: data request to start
 *
 * Sets the done callback to be called when request is completed by the card.
 * Starts data mmc request execution
 */
static int __mmc_start_data_req(struct mmc_host *host, struct mmc_request *mrq)
{
398 399
	int err;

400 401
	mrq->done = mmc_wait_data_done;
	mrq->host = host;
402 403 404 405

	err = mmc_start_request(host, mrq);
	if (err) {
		mrq->cmd->error = err;
406
		mmc_wait_data_done(mrq);
407 408
	}

409
	return err;
410 411
}

412
static int __mmc_start_req(struct mmc_host *host, struct mmc_request *mrq)
413
{
414 415
	int err;

416 417
	init_completion(&mrq->completion);
	mrq->done = mmc_wait_done;
418 419 420 421

	err = mmc_start_request(host, mrq);
	if (err) {
		mrq->cmd->error = err;
422 423
		complete(&mrq->completion);
	}
424 425

	return err;
426 427
}

428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458
/*
 * mmc_wait_for_data_req_done() - wait for request completed
 * @host: MMC host to prepare the command.
 * @mrq: MMC request to wait for
 *
 * Blocks MMC context till host controller will ack end of data request
 * execution or new request notification arrives from the block layer.
 * Handles command retries.
 *
 * Returns enum mmc_blk_status after checking errors.
 */
static int mmc_wait_for_data_req_done(struct mmc_host *host,
				      struct mmc_request *mrq,
				      struct mmc_async_req *next_req)
{
	struct mmc_command *cmd;
	struct mmc_context_info *context_info = &host->context_info;
	int err;
	unsigned long flags;

	while (1) {
		wait_event_interruptible(context_info->wait,
				(context_info->is_done_rcv ||
				 context_info->is_new_req));
		spin_lock_irqsave(&context_info->lock, flags);
		context_info->is_waiting_last_req = false;
		spin_unlock_irqrestore(&context_info->lock, flags);
		if (context_info->is_done_rcv) {
			context_info->is_done_rcv = false;
			context_info->is_new_req = false;
			cmd = mrq->cmd;
459

460 461 462 463 464 465
			if (!cmd->error || !cmd->retries ||
			    mmc_card_removed(host->card)) {
				err = host->areq->err_check(host->card,
							    host->areq);
				break; /* return err */
			} else {
466
				mmc_retune_recheck(host);
467 468 469 470 471
				pr_info("%s: req failed (CMD%u): %d, retrying...\n",
					mmc_hostname(host),
					cmd->opcode, cmd->error);
				cmd->retries--;
				cmd->error = 0;
472
				__mmc_start_request(host, mrq);
473 474 475 476
				continue; /* wait for done/new event again */
			}
		} else if (context_info->is_new_req) {
			context_info->is_new_req = false;
477 478
			if (!next_req)
				return MMC_BLK_NEW_REQUEST;
479 480
		}
	}
481
	mmc_retune_release(host);
482 483 484
	return err;
}

485 486 487
static void mmc_wait_for_req_done(struct mmc_host *host,
				  struct mmc_request *mrq)
{
488 489 490 491 492 493
	struct mmc_command *cmd;

	while (1) {
		wait_for_completion(&mrq->completion);

		cmd = mrq->cmd;
494 495 496 497 498 499 500 501 502

		/*
		 * If host has timed out waiting for the sanitize
		 * to complete, card might be still in programming state
		 * so let's try to bring the card out of programming
		 * state.
		 */
		if (cmd->sanitize_busy && cmd->error == -ETIMEDOUT) {
			if (!mmc_interrupt_hpi(host->card)) {
503 504
				pr_warn("%s: %s: Interrupted sanitize\n",
					mmc_hostname(host), __func__);
505 506 507 508 509 510 511
				cmd->error = 0;
				break;
			} else {
				pr_err("%s: %s: Failed to interrupt sanitize\n",
				       mmc_hostname(host), __func__);
			}
		}
512 513
		if (!cmd->error || !cmd->retries ||
		    mmc_card_removed(host->card))
514 515
			break;

516 517
		mmc_retune_recheck(host);

518 519 520 521
		pr_debug("%s: req failed (CMD%u): %d, retrying...\n",
			 mmc_hostname(host), cmd->opcode, cmd->error);
		cmd->retries--;
		cmd->error = 0;
522
		__mmc_start_request(host, mrq);
523
	}
524 525

	mmc_retune_release(host);
526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541
}

/**
 *	mmc_pre_req - Prepare for a new request
 *	@host: MMC host to prepare command
 *	@mrq: MMC request to prepare for
 *	@is_first_req: true if there is no previous started request
 *                     that may run in parellel to this call, otherwise false
 *
 *	mmc_pre_req() is called in prior to mmc_start_req() to let
 *	host prepare for the new request. Preparation of a request may be
 *	performed while another request is running on the host.
 */
static void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq,
		 bool is_first_req)
{
Ulf Hansson's avatar
Ulf Hansson committed
542
	if (host->ops->pre_req)
543 544 545 546 547 548 549 550 551 552 553 554 555 556 557
		host->ops->pre_req(host, mrq, is_first_req);
}

/**
 *	mmc_post_req - Post process a completed request
 *	@host: MMC host to post process command
 *	@mrq: MMC request to post process for
 *	@err: Error, if non zero, clean up any resources made in pre_req
 *
 *	Let the host post process a completed request. Post processing of
 *	a request may be performed while another reuqest is running.
 */
static void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq,
			 int err)
{
Ulf Hansson's avatar
Ulf Hansson committed
558
	if (host->ops->post_req)
559
		host->ops->post_req(host, mrq, err);
Linus Torvalds's avatar
Linus Torvalds committed
560 561
}

562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581
/**
 *	mmc_start_req - start a non-blocking request
 *	@host: MMC host to start command
 *	@areq: async request to start
 *	@error: out parameter returns 0 for success, otherwise non zero
 *
 *	Start a new MMC custom command request for a host.
 *	If there is on ongoing async request wait for completion
 *	of that request and start the new one and return.
 *	Does not wait for the new request to complete.
 *
 *      Returns the completed request, NULL in case of none completed.
 *	Wait for the an ongoing request (previoulsy started) to complete and
 *	return the completed request. If there is no ongoing request, NULL
 *	is returned without waiting. NULL is not an error condition.
 */
struct mmc_async_req *mmc_start_req(struct mmc_host *host,
				    struct mmc_async_req *areq, int *error)
{
	int err = 0;
582
	int start_err = 0;
583 584 585 586 587 588 589
	struct mmc_async_req *data = host->areq;

	/* Prepare a new request */
	if (areq)
		mmc_pre_req(host, areq->mrq, !host->areq);

	if (host->areq) {
Jaehoon Chung's avatar
Jaehoon Chung committed
590 591 592 593 594 595 596 597 598 599
		err = mmc_wait_for_data_req_done(host, host->areq->mrq,	areq);
		if (err == MMC_BLK_NEW_REQUEST) {
			if (error)
				*error = err;
			/*
			 * The previous request was not completed,
			 * nothing to return
			 */
			return NULL;
		}
600 601 602 603 604 605
		/*
		 * Check BKOPS urgency for each R1 response
		 */
		if (host->card && mmc_card_mmc(host->card) &&
		    ((mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1) ||
		     (mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1B)) &&
606 607 608 609 610 611
		    (host->areq->mrq->cmd->resp[0] & R1_EXCEPTION_EVENT)) {

			/* Cancel the prepared request */
			if (areq)
				mmc_post_req(host, areq->mrq, -EINVAL);

612
			mmc_start_bkops(host->card, true);
613 614 615 616 617

			/* prepare the request again */
			if (areq)
				mmc_pre_req(host, areq->mrq, !host->areq);
		}
618 619
	}

620
	if (!err && areq)
621
		start_err = __mmc_start_data_req(host, areq->mrq);
622 623 624 625

	if (host->areq)
		mmc_post_req(host, host->areq->mrq, 0);

626 627
	 /* Cancel a prepared request if it was not started. */
	if ((err || start_err) && areq)
Jaehoon Chung's avatar
Jaehoon Chung committed
628
		mmc_post_req(host, areq->mrq, -EINVAL);
629 630 631 632 633 634

	if (err)
		host->areq = NULL;
	else
		host->areq = areq;

635 636 637 638 639 640
	if (error)
		*error = err;
	return data;
}
EXPORT_SYMBOL(mmc_start_req);

Pierre Ossman's avatar
Pierre Ossman committed
641 642 643 644 645 646 647 648 649 650
/**
 *	mmc_wait_for_req - start a request and wait for completion
 *	@host: MMC host to start command
 *	@mrq: MMC request to start
 *
 *	Start a new MMC custom command request for a host, and wait
 *	for the command to complete. Does not attempt to parse the
 *	response.
 */
void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq)
Linus Torvalds's avatar
Linus Torvalds committed
651
{
652 653
	__mmc_start_req(host, mrq);
	mmc_wait_for_req_done(host, mrq);
Linus Torvalds's avatar
Linus Torvalds committed
654 655 656
}
EXPORT_SYMBOL(mmc_wait_for_req);

657 658 659 660 661
/**
 *	mmc_interrupt_hpi - Issue for High priority Interrupt
 *	@card: the MMC card associated with the HPI transfer
 *
 *	Issued High Priority Interrupt, and check for card status
662
 *	until out-of prg-state.
663 664 665 666 667
 */
int mmc_interrupt_hpi(struct mmc_card *card)
{
	int err;
	u32 status;
668
	unsigned long prg_wait;
669 670 671 672 673 674 675 676 677 678 679 680 681 682 683

	BUG_ON(!card);

	if (!card->ext_csd.hpi_en) {
		pr_info("%s: HPI enable bit unset\n", mmc_hostname(card->host));
		return 1;
	}

	mmc_claim_host(card->host);
	err = mmc_send_status(card, &status);
	if (err) {
		pr_err("%s: Get card status fail\n", mmc_hostname(card->host));
		goto out;
	}

684 685 686 687
	switch (R1_CURRENT_STATE(status)) {
	case R1_STATE_IDLE:
	case R1_STATE_READY:
	case R1_STATE_STBY:
688
	case R1_STATE_TRAN:
689
		/*
690
		 * In idle and transfer states, HPI is not needed and the caller
691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716
		 * can issue the next intended command immediately
		 */
		goto out;
	case R1_STATE_PRG:
		break;
	default:
		/* In all other states, it's illegal to issue HPI */
		pr_debug("%s: HPI cannot be sent. Card state=%d\n",
			mmc_hostname(card->host), R1_CURRENT_STATE(status));
		err = -EINVAL;
		goto out;
	}

	err = mmc_send_hpi_cmd(card, &status);
	if (err)
		goto out;

	prg_wait = jiffies + msecs_to_jiffies(card->ext_csd.out_of_int_time);
	do {
		err = mmc_send_status(card, &status);

		if (!err && R1_CURRENT_STATE(status) == R1_STATE_TRAN)
			break;
		if (time_after(jiffies, prg_wait))
			err = -ETIMEDOUT;
	} while (!err);
717 718 719 720 721 722 723

out:
	mmc_release_host(card->host);
	return err;
}
EXPORT_SYMBOL(mmc_interrupt_hpi);

Linus Torvalds's avatar
Linus Torvalds committed
724 725 726 727 728 729 730 731 732 733 734 735
/**
 *	mmc_wait_for_cmd - start a command and wait for completion
 *	@host: MMC host to start command
 *	@cmd: MMC command to start
 *	@retries: maximum number of retries
 *
 *	Start a new MMC command for a host, and wait for the command
 *	to complete.  Return any error that occurred while the command
 *	was executing.  Do not attempt to parse the response.
 */
int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries)
{
736
	struct mmc_request mrq = {NULL};
Linus Torvalds's avatar
Linus Torvalds committed
737

738
	WARN_ON(!host->claimed);
Linus Torvalds's avatar
Linus Torvalds committed
739 740 741 742 743 744 745 746 747 748 749 750 751 752

	memset(cmd->resp, 0, sizeof(cmd->resp));
	cmd->retries = retries;

	mrq.cmd = cmd;
	cmd->data = NULL;

	mmc_wait_for_req(host, &mrq);

	return cmd->error;
}

EXPORT_SYMBOL(mmc_wait_for_cmd);

753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774
/**
 *	mmc_stop_bkops - stop ongoing BKOPS
 *	@card: MMC card to check BKOPS
 *
 *	Send HPI command to stop ongoing background operations to
 *	allow rapid servicing of foreground operations, e.g. read/
 *	writes. Wait until the card comes out of the programming state
 *	to avoid errors in servicing read/write requests.
 */
int mmc_stop_bkops(struct mmc_card *card)
{
	int err = 0;

	BUG_ON(!card);
	err = mmc_interrupt_hpi(card);

	/*
	 * If err is EINVAL, we can't issue an HPI.
	 * It should complete the BKOPS.
	 */
	if (!err || (err == -EINVAL)) {
		mmc_card_clr_doing_bkops(card);
775
		mmc_retune_release(card->host);
776 777 778 779 780 781 782 783 784 785 786 787 788
		err = 0;
	}

	return err;
}
EXPORT_SYMBOL(mmc_stop_bkops);

int mmc_read_bkops_status(struct mmc_card *card)
{
	int err;
	u8 *ext_csd;

	mmc_claim_host(card->host);
789
	err = mmc_get_ext_csd(card, &ext_csd);
790 791
	mmc_release_host(card->host);
	if (err)
792
		return err;
793 794 795 796

	card->ext_csd.raw_bkops_status = ext_csd[EXT_CSD_BKOPS_STATUS];
	card->ext_csd.raw_exception_status = ext_csd[EXT_CSD_EXP_EVENTS_STATUS];
	kfree(ext_csd);
797
	return 0;
798 799 800
}
EXPORT_SYMBOL(mmc_read_bkops_status);

801 802 803 804
/**
 *	mmc_set_data_timeout - set the timeout for a data command
 *	@data: data phase for command
 *	@card: the MMC card associated with the data transfer
Pierre Ossman's avatar
Pierre Ossman committed
805 806 807
 *
 *	Computes the data timeout parameters according to the
 *	correct algorithm given the card type.
808
 */
809
void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
810 811 812
{
	unsigned int mult;

813 814 815 816 817 818 819 820 821
	/*
	 * SDIO cards only define an upper 1 s limit on access.
	 */
	if (mmc_card_sdio(card)) {
		data->timeout_ns = 1000000000;
		data->timeout_clks = 0;
		return;
	}

822 823 824 825 826 827 828 829 830
	/*
	 * SD cards use a 100 multiplier rather than 10
	 */
	mult = mmc_card_sd(card) ? 100 : 10;

	/*
	 * Scale up the multiplier (and therefore the timeout) by
	 * the r2w factor for writes.
	 */
831
	if (data->flags & MMC_DATA_WRITE)
832 833 834 835 836 837 838 839 840 841 842 843
		mult <<= card->csd.r2w_factor;

	data->timeout_ns = card->csd.tacc_ns * mult;
	data->timeout_clks = card->csd.tacc_clks * mult;

	/*
	 * SD cards also have an upper limit on the timeout.
	 */
	if (mmc_card_sd(card)) {
		unsigned int timeout_us, limit_us;

		timeout_us = data->timeout_ns / 1000;
Ulf Hansson's avatar
Ulf Hansson committed
844
		if (card->host->ios.clock)
845
			timeout_us += data->timeout_clks * 1000 /
Ulf Hansson's avatar
Ulf Hansson committed
846
				(card->host->ios.clock / 1000);
847

848
		if (data->flags & MMC_DATA_WRITE)
849
			/*
850 851 852 853 854 855
			 * The MMC spec "It is strongly recommended
			 * for hosts to implement more than 500ms
			 * timeout value even if the card indicates
			 * the 250ms maximum busy length."  Even the
			 * previous value of 300ms is known to be
			 * insufficient for some cards.
856
			 */
857
			limit_us = 3000000;
858 859 860
		else
			limit_us = 100000;

861 862 863 864
		/*
		 * SDHC cards always use these fixed values.
		 */
		if (timeout_us > limit_us || mmc_card_blockaddr(card)) {
865 866 867
			data->timeout_ns = limit_us * 1000;
			data->timeout_clks = 0;
		}
868 869 870 871

		/* assign limit value if invalid */
		if (timeout_us == 0)
			data->timeout_ns = limit_us * 1000;
872
	}
873 874 875 876 877 878 879 880 881 882 883 884

	/*
	 * Some cards require longer data read timeout than indicated in CSD.
	 * Address this by setting the read timeout to a "reasonably high"
	 * value. For the cards tested, 300ms has proven enough. If necessary,
	 * this value can be increased if other problematic cards require this.
	 */
	if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) {
		data->timeout_ns = 300000000;
		data->timeout_clks = 0;
	}

885 886 887 888 889 890 891 892 893 894 895 896 897 898 899
	/*
	 * Some cards need very high timeouts if driven in SPI mode.
	 * The worst observed timeout was 900ms after writing a
	 * continuous stream of data until the internal logic
	 * overflowed.
	 */
	if (mmc_host_is_spi(card->host)) {
		if (data->flags & MMC_DATA_WRITE) {
			if (data->timeout_ns < 1000000000)
				data->timeout_ns = 1000000000;	/* 1s */
		} else {
			if (data->timeout_ns < 100000000)
				data->timeout_ns =  100000000;	/* 100ms */
		}
	}
900 901 902
}
EXPORT_SYMBOL(mmc_set_data_timeout);

903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929
/**
 *	mmc_align_data_size - pads a transfer size to a more optimal value
 *	@card: the MMC card associated with the data transfer
 *	@sz: original transfer size
 *
 *	Pads the original data size with a number of extra bytes in
 *	order to avoid controller bugs and/or performance hits
 *	(e.g. some controllers revert to PIO for certain sizes).
 *
 *	Returns the improved size, which might be unmodified.
 *
 *	Note that this function is only relevant when issuing a
 *	single scatter gather entry.
 */
unsigned int mmc_align_data_size(struct mmc_card *card, unsigned int sz)
{
	/*
	 * FIXME: We don't have a system for the controller to tell
	 * the core about its problems yet, so for now we just 32-bit
	 * align the size.
	 */
	sz = ((sz + 3) / 4) * 4;

	return sz;
}
EXPORT_SYMBOL(mmc_align_data_size);

Linus Torvalds's avatar
Linus Torvalds committed
930
/**
931
 *	__mmc_claim_host - exclusively claim a host
Linus Torvalds's avatar
Linus Torvalds committed
932
 *	@host: mmc host to claim
933
 *	@abort: whether or not the operation should be aborted
Linus Torvalds's avatar
Linus Torvalds committed
934
 *
935 936 937 938
 *	Claim a host for a set of operations.  If @abort is non null and
 *	dereference a non-zero value then this will return prematurely with
 *	that non-zero value without acquiring the lock.  Returns zero
 *	with the lock held otherwise.
Linus Torvalds's avatar
Linus Torvalds committed
939
 */
940
int __mmc_claim_host(struct mmc_host *host, atomic_t *abort)
Linus Torvalds's avatar
Linus Torvalds committed
941 942 943
{
	DECLARE_WAITQUEUE(wait, current);
	unsigned long flags;
944
	int stop;
945
	bool pm = false;
Linus Torvalds's avatar
Linus Torvalds committed
946

947 948
	might_sleep();

Linus Torvalds's avatar
Linus Torvalds committed
949 950 951 952
	add_wait_queue(&host->wq, &wait);
	spin_lock_irqsave(&host->lock, flags);
	while (1) {
		set_current_state(TASK_UNINTERRUPTIBLE);
953
		stop = abort ? atomic_read(abort) : 0;
954
		if (stop || !host->claimed || host->claimer == current)
Linus Torvalds's avatar
Linus Torvalds committed
955 956 957 958 959 960
			break;
		spin_unlock_irqrestore(&host->lock, flags);
		schedule();
		spin_lock_irqsave(&host->lock, flags);
	}
	set_current_state(TASK_RUNNING);
961
	if (!stop) {
962
		host->claimed = 1;
963 964
		host->claimer = current;
		host->claim_cnt += 1;
965 966
		if (host->claim_cnt == 1)
			pm = true;
967
	} else
968
		wake_up(&host->wq);
Linus Torvalds's avatar
Linus Torvalds committed
969 970
	spin_unlock_irqrestore(&host->lock, flags);
	remove_wait_queue(&host->wq, &wait);
971 972 973 974

	if (pm)
		pm_runtime_get_sync(mmc_dev(host));

975
	return stop;
Linus Torvalds's avatar
Linus Torvalds committed
976
}
977
EXPORT_SYMBOL(__mmc_claim_host);
978

979
/**
980
 *	mmc_release_host - release a host
981 982
 *	@host: mmc host to release
 *
983 984
 *	Release a MMC host, allowing others to claim the host
 *	for their operations.
985
 */
986
void mmc_release_host(struct mmc_host *host)
987 988 989
{
	unsigned long flags;

990 991
	WARN_ON(!host->claimed);

992
	spin_lock_irqsave(&host->lock, flags);
993 994 995 996 997 998 999 1000
	if (--host->claim_cnt) {
		/* Release for nested claim */
		spin_unlock_irqrestore(&host->lock, flags);
	} else {
		host->claimed = 0;
		host->claimer = NULL;
		spin_unlock_irqrestore(&host->lock, flags);
		wake_up(&host->wq);
1001 1002
		pm_runtime_mark_last_busy(mmc_dev(host));
		pm_runtime_put_autosuspend(mmc_dev(host));
1003
	}
1004
}
Linus Torvalds's avatar
Linus Torvalds committed
1005 1006
EXPORT_SYMBOL(mmc_release_host);

1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029
/*
 * This is a helper function, which fetches a runtime pm reference for the
 * card device and also claims the host.
 */
void mmc_get_card(struct mmc_card *card)
{
	pm_runtime_get_sync(&card->dev);
	mmc_claim_host(card->host);
}
EXPORT_SYMBOL(mmc_get_card);

/*
 * This is a helper function, which releases the host and drops the runtime
 * pm reference for the card device.
 */
void mmc_put_card(struct mmc_card *card)
{
	mmc_release_host(card->host);
	pm_runtime_mark_last_busy(&card->dev);
	pm_runtime_put_autosuspend(&card->dev);
}
EXPORT_SYMBOL(mmc_put_card);

Pierre Ossman's avatar
Pierre Ossman committed
1030 1031 1032 1033
/*
 * Internal function that does the actual ios call to the host driver,
 * optionally printing some debug output.
 */
1034 1035 1036 1037
static inline void mmc_set_ios(struct mmc_host *host)
{
	struct mmc_ios *ios = &host->ios;

1038 1039
	pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u "
		"width %u timing %u\n",
1040 1041
		 mmc_hostname(host), ios->clock, ios->bus_mode,
		 ios->power_mode, ios->chip_select, ios->vdd,
1042
		 ios->bus_width, ios->timing);
1043

1044 1045 1046
	host->ops->set_ios(host, ios);
}

Pierre Ossman's avatar
Pierre Ossman committed
1047 1048 1049
/*
 * Control chip select pin on a host.
 */
Pierre Ossman's avatar
Pierre Ossman committed
1050
void mmc_set_chip_select(struct mmc_host *host, int mode)
Linus Torvalds's avatar
Linus Torvalds committed
1051
{
Pierre Ossman's avatar
Pierre Ossman committed
1052 1053
	host->ios.chip_select = mode;
	mmc_set_ios(host);
Linus Torvalds's avatar
Linus Torvalds committed
1054 1055
}

Pierre Ossman's avatar
Pierre Ossman committed
1056 1057 1058 1059
/*
 * Sets the host clock to the highest possible frequency that
 * is below "hz".
 */
Ulf Hansson's avatar
Ulf Hansson committed
1060
void mmc_set_clock(struct mmc_host *host, unsigned int hz)
Pierre Ossman's avatar
Pierre Ossman committed
1061
{
1062
	WARN_ON(hz && hz < host->f_min);
Pierre Ossman's avatar
Pierre Ossman committed
1063 1064 1065 1066 1067 1068 1069 1070

	if (hz > host->f_max)
		hz = host->f_max;

	host->ios.clock = hz;
	mmc_set_ios(host);
}

1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088
int mmc_execute_tuning(struct mmc_card *card)
{
	struct mmc_host *host = card->host;
	u32 opcode;
	int err;

	if (!host->ops->execute_tuning)
		return 0;

	if (mmc_card_mmc(card))
		opcode = MMC_SEND_TUNING_BLOCK_HS200;
	else
		opcode = MMC_SEND_TUNING_BLOCK;

	err = host->ops->execute_tuning(host, opcode);

	if (err)
		pr_err("%s: tuning execution failed\n", mmc_hostname(host));
1089 1090
	else
		mmc_retune_enable(host);
1091 1092 1093 1094

	return err;
}

Pierre Ossman's avatar
Pierre Ossman committed
1095 1096 1097 1098 1099 1100 1101 1102 1103
/*
 * Change the bus mode (open drain/push-pull) of a host.
 */
void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode)
{
	host->ios.bus_mode = mode;
	mmc_set_ios(host);
}

1104 1105 1106 1107 1108
/*
 * Change data bus width of a host.
 */
void mmc_set_bus_width(struct mmc_host *host, unsigned int width)
{
1109 1110
	host->ios.bus_width = width;
	mmc_set_ios(host);
1111 1112
}

1113 1114 1115 1116 1117
/*
 * Set initial state after a power cycle or a hw_reset.
 */
void mmc_set_initial_state(struct mmc_host *host)
{
1118 1119
	mmc_retune_disable(host);

1120 1121 1122 1123 1124 1125 1126
	if (mmc_host_is_spi(host))
		host->ios.chip_select = MMC_CS_HIGH;
	else
		host->ios.chip_select = MMC_CS_DONTCARE;
	host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
	host->ios.bus_width = MMC_BUS_WIDTH_1;
	host->ios.timing = MMC_TIMING_LEGACY;
1127
	host->ios.drv_type = 0;
1128 1129 1130 1131

	mmc_set_ios(host);
}

1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205
/**
 * mmc_vdd_to_ocrbitnum - Convert a voltage to the OCR bit number
 * @vdd:	voltage (mV)
 * @low_bits:	prefer low bits in boundary cases
 *
 * This function returns the OCR bit number according to the provided @vdd
 * value. If conversion is not possible a negative errno value returned.
 *
 * Depending on the @low_bits flag the function prefers low or high OCR bits
 * on boundary voltages. For example,
 * with @low_bits = true, 3300 mV translates to ilog2(MMC_VDD_32_33);
 * with @low_bits = false, 3300 mV translates to ilog2(MMC_VDD_33_34);
 *
 * Any value in the [1951:1999] range translates to the ilog2(MMC_VDD_20_21).
 */
static int mmc_vdd_to_ocrbitnum(int vdd, bool low_bits)
{
	const int max_bit = ilog2(MMC_VDD_35_36);
	int bit;

	if (vdd < 1650 || vdd > 3600)
		return -EINVAL;

	if (vdd >= 1650 && vdd <= 1950)
		return ilog2(MMC_VDD_165_195);

	if (low_bits)
		vdd -= 1;

	/* Base 2000 mV, step 100 mV, bit's base 8. */
	bit = (vdd - 2000) / 100 + 8;
	if (bit > max_bit)
		return max_bit;
	return bit;
}

/**
 * mmc_vddrange_to_ocrmask - Convert a voltage range to the OCR mask
 * @vdd_min:	minimum voltage value (mV)
 * @vdd_max:	maximum voltage value (mV)
 *
 * This function returns the OCR mask bits according to the provided @vdd_min
 * and @vdd_max values. If conversion is not possible the function returns 0.
 *
 * Notes wrt boundary cases:
 * This function sets the OCR bits for all boundary voltages, for example
 * [3300:3400] range is translated to MMC_VDD_32_33 | MMC_VDD_33_34 |
 * MMC_VDD_34_35 mask.
 */
u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max)
{
	u32 mask = 0;

	if (vdd_max < vdd_min)
		return 0;

	/* Prefer high bits for the boundary vdd_max values. */
	vdd_max = mmc_vdd_to_ocrbitnum(vdd_max, false);
	if (vdd_max < 0)
		return 0;

	/* Prefer low bits for the boundary vdd_min values. */
	vdd_min = mmc_vdd_to_ocrbitnum(vdd_min, true);
	if (vdd_min < 0)
		return 0;

	/* Fill the mask, from max bit to min bit. */
	while (vdd_max >= vdd_min)
		mask |= 1 << vdd_max--;

	return mask;
}
EXPORT_SYMBOL(mmc_vddrange_to_ocrmask);

1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248
#ifdef CONFIG_OF

/**
 * mmc_of_parse_voltage - return mask of supported voltages
 * @np: The device node need to be parsed.
 * @mask: mask of voltages available for MMC/SD/SDIO
 *
 * 1. Return zero on success.
 * 2. Return negative errno: voltage-range is invalid.
 */
int mmc_of_parse_voltage(struct device_node *np, u32 *mask)
{
	const u32 *voltage_ranges;
	int num_ranges, i;

	voltage_ranges = of_get_property(np, "voltage-ranges", &num_ranges);
	num_ranges = num_ranges / sizeof(*voltage_ranges) / 2;
	if (!voltage_ranges || !num_ranges) {
		pr_info("%s: voltage-ranges unspecified\n", np->full_name);
		return -EINVAL;
	}

	for (i = 0; i < num_ranges; i++) {
		const int j = i * 2;
		u32 ocr_mask;

		ocr_mask = mmc_vddrange_to_ocrmask(
				be32_to_cpu(voltage_ranges[j]),
				be32_to_cpu(voltage_ranges[j + 1]));
		if (!ocr_mask) {
			pr_err("%s: voltage-range #%d is invalid\n",
				np->full_name, i);
			return -EINVAL;
		}
		*mask |= ocr_mask;
	}

	return 0;
}
EXPORT_SYMBOL(mmc_of_parse_voltage);

#endif /* CONFIG_OF */

1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276
static int mmc_of_get_func_num(struct device_node *node)
{
	u32 reg;
	int ret;

	ret = of_property_read_u32(node, "reg", &reg);
	if (ret < 0)
		return ret;

	return reg;
}

struct device_node *mmc_of_find_child_device(struct mmc_host *host,
		unsigned func_num)
{
	struct device_node *node;

	if (!host->parent || !host->parent->of_node)
		return NULL;

	for_each_child_of_node(host->parent->of_node, node) {
		if (mmc_of_get_func_num(node) == func_num)
			return node;
	}

	return NULL;
}

David Brownell's avatar
David Brownell committed
1277 1278
#ifdef CONFIG_REGULATOR

1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312
/**
 * mmc_ocrbitnum_to_vdd - Convert a OCR bit number to its voltage
 * @vdd_bit:	OCR bit number
 * @min_uV:	minimum voltage value (mV)
 * @max_uV:	maximum voltage value (mV)
 *
 * This function returns the voltage range according to the provided OCR
 * bit number. If conversion is not possible a negative errno value returned.
 */
static int mmc_ocrbitnum_to_vdd(int vdd_bit, int *min_uV, int *max_uV)
{
	int		tmp;

	if (!vdd_bit)
		return -EINVAL;

	/*
	 * REVISIT mmc_vddrange_to_ocrmask() may have set some
	 * bits this regulator doesn't quite support ... don't
	 * be too picky, most cards and regulators are OK with
	 * a 0.1V range goof (it's a small error percentage).
	 */
	tmp = vdd_bit - ilog2(MMC_VDD_165_195);
	if (tmp == 0) {
		*min_uV = 1650 * 1000;
		*max_uV = 1950 * 1000;
	} else {
		*min_uV = 1900 * 1000 + tmp * 100 * 1000;
		*max_uV = *min_uV + 100 * 1000;
	}

	return 0;
}

David Brownell's avatar
David Brownell committed
1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326
/**
 * mmc_regulator_get_ocrmask - return mask of supported voltages
 * @supply: regulator to use
 *
 * This returns either a negative errno, or a mask of voltages that
 * can be provided to MMC/SD/SDIO devices using the specified voltage
 * regulator.  This would normally be called before registering the
 * MMC host adapter.
 */
int mmc_regulator_get_ocrmask(struct regulator *supply)
{
	int			result = 0;
	int			count;
	int			i;
1327 1328
	int			vdd_uV;
	int			vdd_mV;
David Brownell's avatar
David Brownell committed
1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342

	count = regulator_count_voltages(supply);
	if (count < 0)
		return count;

	for (i = 0; i < count; i++) {
		vdd_uV = regulator_list_voltage(supply, i);
		if (vdd_uV <= 0)
			continue;

		vdd_mV = vdd_uV / 1000;
		result |= mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV);
	}

1343 1344 1345 1346 1347 1348 1349 1350 1351
	if (!result) {
		vdd_uV = regulator_get_voltage(supply);
		if (vdd_uV <= 0)
			return vdd_uV;

		vdd_mV = vdd_uV / 1000;
		result = mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV);
	}

David Brownell's avatar
David Brownell committed
1352 1353
	return result;
}
1354
EXPORT_SYMBOL_GPL(mmc_regulator_get_ocrmask);
David Brownell's avatar
David Brownell committed
1355 1356 1357

/**
 * mmc_regulator_set_ocr - set regulator to match host->ios voltage
1358
 * @mmc: the host to regulate
David Brownell's avatar
David Brownell committed
1359
 * @supply: regulator to use
1360
 * @vdd_bit: zero for power off, else a bit number (host->ios.vdd)
David Brownell's avatar
David Brownell committed
1361 1362 1363 1364 1365 1366 1367
 *
 * Returns zero on success, else negative errno.
 *
 * MMC host drivers may use this to enable or disable a regulator using
 * a particular supply voltage.  This would normally be called from the
 * set_ios() method.
 */
1368 1369 1370
int mmc_regulator_set_ocr(struct mmc_host *mmc,
			struct regulator *supply,
			unsigned short vdd_bit)
David Brownell's avatar
David Brownell committed
1371 1372 1373 1374 1375
{
	int			result = 0;
	int			min_uV, max_uV;

	if (vdd_bit) {
1376
		mmc_ocrbitnum_to_vdd(vdd_bit, &min_uV, &max_uV);
David Brownell's avatar
David Brownell committed
1377