watchdog.c 23.9 KB
Newer Older
1 2 3 4 5
/*
 * Detect hard and soft lockups on a system
 *
 * started by Don Zickus, Copyright (C) 2010 Red Hat, Inc.
 *
6 7 8
 * Note: Most of this code is borrowed heavily from the original softlockup
 * detector, so thanks to Ingo for the initial implementation.
 * Some chunks also taken from the old x86-specific nmi watchdog code, thanks
9 10 11
 * to those contributors as well.
 */

12 13
#define pr_fmt(fmt) "NMI watchdog: " fmt

14 15 16 17 18 19
#include <linux/mm.h>
#include <linux/cpu.h>
#include <linux/nmi.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/sysctl.h>
20
#include <linux/smpboot.h>
21
#include <linux/sched/rt.h>
22 23

#include <asm/irq_regs.h>
24
#include <linux/kvm_para.h>
25 26
#include <linux/perf_event.h>

27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
/*
 * The run state of the lockup detectors is controlled by the content of the
 * 'watchdog_enabled' variable. Each lockup detector has its dedicated bit -
 * bit 0 for the hard lockup detector and bit 1 for the soft lockup detector.
 *
 * 'watchdog_user_enabled', 'nmi_watchdog_enabled' and 'soft_watchdog_enabled'
 * are variables that are only used as an 'interface' between the parameters
 * in /proc/sys/kernel and the internal state bits in 'watchdog_enabled'. The
 * 'watchdog_thresh' variable is handled differently because its value is not
 * boolean, and the lockup detectors are 'suspended' while 'watchdog_thresh'
 * is equal zero.
 */
#define NMI_WATCHDOG_ENABLED_BIT   0
#define SOFT_WATCHDOG_ENABLED_BIT  1
#define NMI_WATCHDOG_ENABLED      (1 << NMI_WATCHDOG_ENABLED_BIT)
#define SOFT_WATCHDOG_ENABLED     (1 << SOFT_WATCHDOG_ENABLED_BIT)

#ifdef CONFIG_HARDLOCKUP_DETECTOR
static unsigned long __read_mostly watchdog_enabled = SOFT_WATCHDOG_ENABLED|NMI_WATCHDOG_ENABLED;
#else
static unsigned long __read_mostly watchdog_enabled = SOFT_WATCHDOG_ENABLED;
#endif
int __read_mostly nmi_watchdog_enabled;
int __read_mostly soft_watchdog_enabled;
int __read_mostly watchdog_user_enabled;
52
int __read_mostly watchdog_thresh = 10;
53

54 55 56 57 58 59
#ifdef CONFIG_SMP
int __read_mostly sysctl_softlockup_all_cpu_backtrace;
#else
#define sysctl_softlockup_all_cpu_backtrace 0
#endif

60
static int __read_mostly watchdog_running;
61
static u64 __read_mostly sample_period;
62 63 64 65 66 67

static DEFINE_PER_CPU(unsigned long, watchdog_touch_ts);
static DEFINE_PER_CPU(struct task_struct *, softlockup_watchdog);
static DEFINE_PER_CPU(struct hrtimer, watchdog_hrtimer);
static DEFINE_PER_CPU(bool, softlockup_touch_sync);
static DEFINE_PER_CPU(bool, soft_watchdog_warn);
68 69
static DEFINE_PER_CPU(unsigned long, hrtimer_interrupts);
static DEFINE_PER_CPU(unsigned long, soft_lockup_hrtimer_cnt);
70
static DEFINE_PER_CPU(struct task_struct *, softlockup_task_ptr_saved);
71
#ifdef CONFIG_HARDLOCKUP_DETECTOR
72 73
static DEFINE_PER_CPU(bool, hard_watchdog_warn);
static DEFINE_PER_CPU(bool, watchdog_nmi_touch);
74 75 76
static DEFINE_PER_CPU(unsigned long, hrtimer_interrupts_saved);
static DEFINE_PER_CPU(struct perf_event *, watchdog_ev);
#endif
77
static unsigned long soft_lockup_nmi_warn;
78 79 80 81 82

/* boot commands */
/*
 * Should we panic when a soft-lockup or hard-lockup occurs:
 */
83
#ifdef CONFIG_HARDLOCKUP_DETECTOR
84 85
static int hardlockup_panic =
			CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE;
86

87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105
static bool hardlockup_detector_enabled = true;
/*
 * We may not want to enable hard lockup detection by default in all cases,
 * for example when running the kernel as a guest on a hypervisor. In these
 * cases this function can be called to disable hard lockup detection. This
 * function should only be executed once by the boot processor before the
 * kernel command line parameters are parsed, because otherwise it is not
 * possible to override this in hardlockup_panic_setup().
 */
void watchdog_enable_hardlockup_detector(bool val)
{
	hardlockup_detector_enabled = val;
}

bool watchdog_hardlockup_detector_is_enabled(void)
{
	return hardlockup_detector_enabled;
}

106 107 108 109
static int __init hardlockup_panic_setup(char *str)
{
	if (!strncmp(str, "panic", 5))
		hardlockup_panic = 1;
110 111
	else if (!strncmp(str, "nopanic", 7))
		hardlockup_panic = 0;
112
	else if (!strncmp(str, "0", 1))
113 114 115
		watchdog_enabled &= ~NMI_WATCHDOG_ENABLED;
	else if (!strncmp(str, "1", 1))
		watchdog_enabled |= NMI_WATCHDOG_ENABLED;
116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133
	return 1;
}
__setup("nmi_watchdog=", hardlockup_panic_setup);
#endif

unsigned int __read_mostly softlockup_panic =
			CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE;

static int __init softlockup_panic_setup(char *str)
{
	softlockup_panic = simple_strtoul(str, NULL, 0);

	return 1;
}
__setup("softlockup_panic=", softlockup_panic_setup);

static int __init nowatchdog_setup(char *str)
{
134
	watchdog_enabled = 0;
135 136 137 138 139 140
	return 1;
}
__setup("nowatchdog", nowatchdog_setup);

static int __init nosoftlockup_setup(char *str)
{
141
	watchdog_enabled &= ~SOFT_WATCHDOG_ENABLED;
142 143 144
	return 1;
}
__setup("nosoftlockup", nosoftlockup_setup);
145

146 147 148 149 150 151 152 153 154
#ifdef CONFIG_SMP
static int __init softlockup_all_cpu_backtrace_setup(char *str)
{
	sysctl_softlockup_all_cpu_backtrace =
		!!simple_strtol(str, NULL, 0);
	return 1;
}
__setup("softlockup_all_cpu_backtrace=", softlockup_all_cpu_backtrace_setup);
#endif
155

156 157 158 159 160 161 162
/*
 * Hard-lockup warnings should be triggered after just a few seconds. Soft-
 * lockups can have false positives under extreme conditions. So we generally
 * want a higher threshold for soft lockups than for hard lockups. So we couple
 * the thresholds with a factor: we make the soft threshold twice the amount of
 * time the hard threshold is.
 */
163
static int get_softlockup_thresh(void)
164 165 166
{
	return watchdog_thresh * 2;
}
167 168 169 170 171 172

/*
 * Returns seconds, approximately.  We don't need nanosecond
 * resolution, and we don't need to waste time with a big divide when
 * 2^30ns == 1.074s.
 */
173
static unsigned long get_timestamp(void)
174
{
175
	return running_clock() >> 30LL;  /* 2^30 ~= 10^9 */
176 177
}

178
static void set_sample_period(void)
179 180
{
	/*
181
	 * convert watchdog_thresh from seconds to ns
182 183 184 185
	 * the divide by 5 is to give hrtimer several chances (two
	 * or three with the current relation between the soft
	 * and hard thresholds) to increment before the
	 * hardlockup detector generates a warning
186
	 */
187
	sample_period = get_softlockup_thresh() * ((u64)NSEC_PER_SEC / 5);
188 189 190 191 192
}

/* Commands for resetting the watchdog */
static void __touch_watchdog(void)
{
193
	__this_cpu_write(watchdog_touch_ts, get_timestamp());
194 195
}

196
void touch_softlockup_watchdog(void)
197
{
198 199 200 201 202
	/*
	 * Preemption can be enabled.  It doesn't matter which CPU's timestamp
	 * gets zeroed here, so use the raw_ operation.
	 */
	raw_cpu_write(watchdog_touch_ts, 0);
203
}
204
EXPORT_SYMBOL(touch_softlockup_watchdog);
205

206
void touch_all_softlockup_watchdogs(void)
207 208 209 210 211 212 213 214 215 216 217 218
{
	int cpu;

	/*
	 * this is done lockless
	 * do we care if a 0 races with a timestamp?
	 * all it means is the softlock check starts one cycle later
	 */
	for_each_online_cpu(cpu)
		per_cpu(watchdog_touch_ts, cpu) = 0;
}

219
#ifdef CONFIG_HARDLOCKUP_DETECTOR
220 221
void touch_nmi_watchdog(void)
{
222 223 224 225 226 227 228
	/*
	 * Using __raw here because some code paths have
	 * preemption enabled.  If preemption is enabled
	 * then interrupts should be enabled too, in which
	 * case we shouldn't have to worry about the watchdog
	 * going off.
	 */
229
	raw_cpu_write(watchdog_nmi_touch, true);
230
	touch_softlockup_watchdog();
231 232 233
}
EXPORT_SYMBOL(touch_nmi_watchdog);

234 235
#endif

236 237
void touch_softlockup_watchdog_sync(void)
{
238 239
	__this_cpu_write(softlockup_touch_sync, true);
	__this_cpu_write(watchdog_touch_ts, 0);
240 241
}

242
#ifdef CONFIG_HARDLOCKUP_DETECTOR
243
/* watchdog detector functions */
244
static int is_hardlockup(void)
245
{
246
	unsigned long hrint = __this_cpu_read(hrtimer_interrupts);
247

248
	if (__this_cpu_read(hrtimer_interrupts_saved) == hrint)
249 250
		return 1;

251
	__this_cpu_write(hrtimer_interrupts_saved, hrint);
252 253 254 255
	return 0;
}
#endif

256
static int is_softlockup(unsigned long touch_ts)
257
{
258
	unsigned long now = get_timestamp();
259

260 261 262 263 264
	if (watchdog_enabled & SOFT_WATCHDOG_ENABLED) {
		/* Warn about unreasonable delays. */
		if (time_after(now, touch_ts + get_softlockup_thresh()))
			return now - touch_ts;
	}
265 266 267
	return 0;
}

268
#ifdef CONFIG_HARDLOCKUP_DETECTOR
269

270 271 272 273 274 275 276 277 278
static struct perf_event_attr wd_hw_attr = {
	.type		= PERF_TYPE_HARDWARE,
	.config		= PERF_COUNT_HW_CPU_CYCLES,
	.size		= sizeof(struct perf_event_attr),
	.pinned		= 1,
	.disabled	= 1,
};

/* Callback function for perf event subsystem */
279
static void watchdog_overflow_callback(struct perf_event *event,
280 281 282
		 struct perf_sample_data *data,
		 struct pt_regs *regs)
{
283 284 285
	/* Ensure the watchdog never gets throttled */
	event->hw.interrupts = 0;

286 287
	if (__this_cpu_read(watchdog_nmi_touch) == true) {
		__this_cpu_write(watchdog_nmi_touch, false);
288 289 290 291 292 293 294 295 296
		return;
	}

	/* check for a hardlockup
	 * This is done by making sure our timer interrupt
	 * is incrementing.  The timer interrupt should have
	 * fired multiple times before we overflow'd.  If it hasn't
	 * then this is a good indication the cpu is stuck
	 */
297 298 299
	if (is_hardlockup()) {
		int this_cpu = smp_processor_id();

300
		/* only print hardlockups once */
301
		if (__this_cpu_read(hard_watchdog_warn) == true)
302 303 304
			return;

		if (hardlockup_panic)
305 306
			panic("Watchdog detected hard LOCKUP on cpu %d",
			      this_cpu);
307
		else
308 309
			WARN(1, "Watchdog detected hard LOCKUP on cpu %d",
			     this_cpu);
310

311
		__this_cpu_write(hard_watchdog_warn, true);
312 313 314
		return;
	}

315
	__this_cpu_write(hard_watchdog_warn, false);
316 317
	return;
}
318 319
#endif /* CONFIG_HARDLOCKUP_DETECTOR */

320 321
static void watchdog_interrupt_count(void)
{
322
	__this_cpu_inc(hrtimer_interrupts);
323
}
324 325 326

static int watchdog_nmi_enable(unsigned int cpu);
static void watchdog_nmi_disable(unsigned int cpu);
327 328 329 330

/* watchdog kicker functions */
static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
{
331
	unsigned long touch_ts = __this_cpu_read(watchdog_touch_ts);
332 333
	struct pt_regs *regs = get_irq_regs();
	int duration;
334
	int softlockup_all_cpu_backtrace = sysctl_softlockup_all_cpu_backtrace;
335 336 337 338 339

	/* kick the hardlockup detector */
	watchdog_interrupt_count();

	/* kick the softlockup detector */
340
	wake_up_process(__this_cpu_read(softlockup_watchdog));
341 342

	/* .. and repeat */
343
	hrtimer_forward_now(hrtimer, ns_to_ktime(sample_period));
344 345

	if (touch_ts == 0) {
346
		if (unlikely(__this_cpu_read(softlockup_touch_sync))) {
347 348 349 350
			/*
			 * If the time stamp was touched atomically
			 * make sure the scheduler tick is up to date.
			 */
351
			__this_cpu_write(softlockup_touch_sync, false);
352 353
			sched_clock_tick();
		}
354 355 356

		/* Clear the guest paused flag on watchdog reset */
		kvm_check_and_clear_guest_paused();
357 358 359 360 361 362 363 364 365 366
		__touch_watchdog();
		return HRTIMER_RESTART;
	}

	/* check for a softlockup
	 * This is done by making sure a high priority task is
	 * being scheduled.  The task touches the watchdog to
	 * indicate it is getting cpu time.  If it hasn't then
	 * this is a good indication some task is hogging the cpu
	 */
367
	duration = is_softlockup(touch_ts);
368
	if (unlikely(duration)) {
369 370 371 372 373 374 375 376
		/*
		 * If a virtual machine is stopped by the host it can look to
		 * the watchdog like a soft lockup, check to see if the host
		 * stopped the vm before we issue the warning
		 */
		if (kvm_check_and_clear_guest_paused())
			return HRTIMER_RESTART;

377
		/* only warn once */
378 379 380 381 382 383 384 385 386 387 388 389 390 391
		if (__this_cpu_read(soft_watchdog_warn) == true) {
			/*
			 * When multiple processes are causing softlockups the
			 * softlockup detector only warns on the first one
			 * because the code relies on a full quiet cycle to
			 * re-arm.  The second process prevents the quiet cycle
			 * and never gets reported.  Use task pointers to detect
			 * this.
			 */
			if (__this_cpu_read(softlockup_task_ptr_saved) !=
			    current) {
				__this_cpu_write(soft_watchdog_warn, false);
				__touch_watchdog();
			}
392
			return HRTIMER_RESTART;
393
		}
394

395 396 397 398 399 400 401 402 403 404 405
		if (softlockup_all_cpu_backtrace) {
			/* Prevent multiple soft-lockup reports if one cpu is already
			 * engaged in dumping cpu back traces
			 */
			if (test_and_set_bit(0, &soft_lockup_nmi_warn)) {
				/* Someone else will report us. Let's give up */
				__this_cpu_write(soft_watchdog_warn, true);
				return HRTIMER_RESTART;
			}
		}

406
		pr_emerg("BUG: soft lockup - CPU#%d stuck for %us! [%s:%d]\n",
407
			smp_processor_id(), duration,
408
			current->comm, task_pid_nr(current));
409
		__this_cpu_write(softlockup_task_ptr_saved, current);
410 411 412 413 414 415 416
		print_modules();
		print_irqtrace_events(current);
		if (regs)
			show_regs(regs);
		else
			dump_stack();

417 418 419 420 421 422 423 424 425 426 427
		if (softlockup_all_cpu_backtrace) {
			/* Avoid generating two back traces for current
			 * given that one is already made above
			 */
			trigger_allbutself_cpu_backtrace();

			clear_bit(0, &soft_lockup_nmi_warn);
			/* Barrier to sync with other cpus */
			smp_mb__after_atomic();
		}

Josh Hunt's avatar
Josh Hunt committed
428
		add_taint(TAINT_SOFTLOCKUP, LOCKDEP_STILL_OK);
429 430
		if (softlockup_panic)
			panic("softlockup: hung tasks");
431
		__this_cpu_write(soft_watchdog_warn, true);
432
	} else
433
		__this_cpu_write(soft_watchdog_warn, false);
434 435 436 437

	return HRTIMER_RESTART;
}

438 439 440
static void watchdog_set_prio(unsigned int policy, unsigned int prio)
{
	struct sched_param param = { .sched_priority = prio };
441

442 443 444 445
	sched_setscheduler(current, policy, &param);
}

static void watchdog_enable(unsigned int cpu)
446
{
447
	struct hrtimer *hrtimer = raw_cpu_ptr(&watchdog_hrtimer);
448

449 450 451 452
	/* kick off the timer for the hardlockup detector */
	hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
	hrtimer->function = watchdog_timer_fn;

453 454
	/* Enable the perf event */
	watchdog_nmi_enable(cpu);
455 456

	/* done here because hrtimer_start can only pin to smp_processor_id() */
457
	hrtimer_start(hrtimer, ns_to_ktime(sample_period),
458 459
		      HRTIMER_MODE_REL_PINNED);

460 461 462 463
	/* initialize timestamp */
	watchdog_set_prio(SCHED_FIFO, MAX_RT_PRIO - 1);
	__touch_watchdog();
}
464

465 466
static void watchdog_disable(unsigned int cpu)
{
467
	struct hrtimer *hrtimer = raw_cpu_ptr(&watchdog_hrtimer);
468

469 470 471 472
	watchdog_set_prio(SCHED_NORMAL, 0);
	hrtimer_cancel(hrtimer);
	/* disable the perf event */
	watchdog_nmi_disable(cpu);
473 474
}

475 476 477 478 479
static void watchdog_cleanup(unsigned int cpu, bool online)
{
	watchdog_disable(cpu);
}

480 481 482 483 484 485 486 487 488
static int watchdog_should_run(unsigned int cpu)
{
	return __this_cpu_read(hrtimer_interrupts) !=
		__this_cpu_read(soft_lockup_hrtimer_cnt);
}

/*
 * The watchdog thread function - touches the timestamp.
 *
489
 * It only runs once every sample_period seconds (4 seconds by
490 491 492 493 494 495 496 497 498
 * default) to reset the softlockup timestamp. If this gets delayed
 * for more than 2*watchdog_thresh seconds then the debug-printout
 * triggers in watchdog_timer_fn().
 */
static void watchdog(unsigned int cpu)
{
	__this_cpu_write(soft_lockup_hrtimer_cnt,
			 __this_cpu_read(hrtimer_interrupts));
	__touch_watchdog();
499 500 501 502 503 504 505 506 507 508 509 510 511 512 513

	/*
	 * watchdog_nmi_enable() clears the NMI_WATCHDOG_ENABLED bit in the
	 * failure path. Check for failures that can occur asynchronously -
	 * for example, when CPUs are on-lined - and shut down the hardware
	 * perf event on each CPU accordingly.
	 *
	 * The only non-obvious place this bit can be cleared is through
	 * watchdog_nmi_enable(), so a pr_info() is placed there.  Placing a
	 * pr_info here would be too noisy as it would result in a message
	 * every few seconds if the hardlockup was disabled but the softlockup
	 * enabled.
	 */
	if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED))
		watchdog_nmi_disable(cpu);
514
}
515

516
#ifdef CONFIG_HARDLOCKUP_DETECTOR
517 518 519 520 521 522 523
/*
 * People like the simple clean cpu node info on boot.
 * Reduce the watchdog noise by only printing messages
 * that are different from what cpu0 displayed.
 */
static unsigned long cpu0_err;

524
static int watchdog_nmi_enable(unsigned int cpu)
525 526 527 528
{
	struct perf_event_attr *wd_attr;
	struct perf_event *event = per_cpu(watchdog_ev, cpu);

529 530 531 532
	/* nothing to do if the hard lockup detector is disabled */
	if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED))
		goto out;

533 534 535 536 537 538 539 540 541
	/*
	 * Some kernels need to default hard lockup detection to
	 * 'disabled', for example a guest on a hypervisor.
	 */
	if (!watchdog_hardlockup_detector_is_enabled()) {
		event = ERR_PTR(-ENOENT);
		goto handle_err;
	}

542 543 544 545 546 547 548 549 550
	/* is it already setup and enabled? */
	if (event && event->state > PERF_EVENT_STATE_OFF)
		goto out;

	/* it is setup but not enabled */
	if (event != NULL)
		goto out_enable;

	wd_attr = &wd_hw_attr;
551
	wd_attr->sample_period = hw_nmi_get_sample_period(watchdog_thresh);
552 553

	/* Try to register using hardware perf events */
554
	event = perf_event_create_kernel_counter(wd_attr, cpu, NULL, watchdog_overflow_callback, NULL);
555

556
handle_err:
557 558 559 560
	/* save cpu0 error for future comparision */
	if (cpu == 0 && IS_ERR(event))
		cpu0_err = PTR_ERR(event);

561
	if (!IS_ERR(event)) {
562 563 564
		/* only print for cpu0 or different than cpu0 */
		if (cpu == 0 || cpu0_err)
			pr_info("enabled on all CPUs, permanently consumes one hw-PMU counter.\n");
565 566 567
		goto out_save;
	}

568 569 570 571 572 573 574 575 576 577 578 579
	/*
	 * Disable the hard lockup detector if _any_ CPU fails to set up
	 * set up the hardware perf event. The watchdog() function checks
	 * the NMI_WATCHDOG_ENABLED bit periodically.
	 *
	 * The barriers are for syncing up watchdog_enabled across all the
	 * cpus, as clear_bit() does not use barriers.
	 */
	smp_mb__before_atomic();
	clear_bit(NMI_WATCHDOG_ENABLED_BIT, &watchdog_enabled);
	smp_mb__after_atomic();

580 581 582
	/* skip displaying the same error again */
	if (cpu > 0 && (PTR_ERR(event) == cpu0_err))
		return PTR_ERR(event);
583 584 585

	/* vary the KERN level based on the returned errno */
	if (PTR_ERR(event) == -EOPNOTSUPP)
586
		pr_info("disabled (cpu%i): not supported (no LAPIC?)\n", cpu);
587
	else if (PTR_ERR(event) == -ENOENT)
588
		pr_warn("disabled (cpu%i): hardware events not enabled\n",
589
			 cpu);
590
	else
591 592
		pr_err("disabled (cpu%i): unable to create perf event: %ld\n",
			cpu, PTR_ERR(event));
593 594 595

	pr_info("Shutting down hard lockup detector on all cpus\n");

596
	return PTR_ERR(event);
597 598 599 600 601 602 603 604 605 606

	/* success path */
out_save:
	per_cpu(watchdog_ev, cpu) = event;
out_enable:
	perf_event_enable(per_cpu(watchdog_ev, cpu));
out:
	return 0;
}

607
static void watchdog_nmi_disable(unsigned int cpu)
608 609 610 611 612 613 614 615 616 617
{
	struct perf_event *event = per_cpu(watchdog_ev, cpu);

	if (event) {
		perf_event_disable(event);
		per_cpu(watchdog_ev, cpu) = NULL;

		/* should be in cleanup, but blocks oprofile */
		perf_event_release_kernel(event);
	}
618 619 620 621
	if (cpu == 0) {
		/* watchdog_nmi_enable() expects this to be zero initially. */
		cpu0_err = 0;
	}
622 623
}
#else
624 625
static int watchdog_nmi_enable(unsigned int cpu) { return 0; }
static void watchdog_nmi_disable(unsigned int cpu) { return; }
626
#endif /* CONFIG_HARDLOCKUP_DETECTOR */
627

628 629 630 631 632 633 634 635 636 637 638
static struct smp_hotplug_thread watchdog_threads = {
	.store			= &softlockup_watchdog,
	.thread_should_run	= watchdog_should_run,
	.thread_fn		= watchdog,
	.thread_comm		= "watchdog/%u",
	.setup			= watchdog_enable,
	.cleanup		= watchdog_cleanup,
	.park			= watchdog_disable,
	.unpark			= watchdog_enable,
};

639 640
static void restart_watchdog_hrtimer(void *info)
{
641
	struct hrtimer *hrtimer = raw_cpu_ptr(&watchdog_hrtimer);
642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666
	int ret;

	/*
	 * No need to cancel and restart hrtimer if it is currently executing
	 * because it will reprogram itself with the new period now.
	 * We should never see it unqueued here because we are running per-cpu
	 * with interrupts disabled.
	 */
	ret = hrtimer_try_to_cancel(hrtimer);
	if (ret == 1)
		hrtimer_start(hrtimer, ns_to_ktime(sample_period),
				HRTIMER_MODE_REL_PINNED);
}

static void update_timers(int cpu)
{
	/*
	 * Make sure that perf event counter will adopt to a new
	 * sampling period. Updating the sampling period directly would
	 * be much nicer but we do not have an API for that now so
	 * let's use a big hammer.
	 * Hrtimer will adopt the new period on the next tick but this
	 * might be late already so we have to restart the timer as well.
	 */
	watchdog_nmi_disable(cpu);
667
	smp_call_function_single(cpu, restart_watchdog_hrtimer, NULL, 1);
668 669 670 671 672 673 674 675 676 677 678 679 680 681
	watchdog_nmi_enable(cpu);
}

static void update_timers_all_cpus(void)
{
	int cpu;

	get_online_cpus();
	for_each_online_cpu(cpu)
		update_timers(cpu);
	put_online_cpus();
}

static int watchdog_enable_all_cpus(bool sample_period_changed)
682
{
683
	int err = 0;
684

685
	if (!watchdog_running) {
686 687 688 689
		err = smpboot_register_percpu_thread(&watchdog_threads);
		if (err)
			pr_err("Failed to create watchdog threads, disabled\n");
		else
690
			watchdog_running = 1;
691 692
	} else if (sample_period_changed) {
		update_timers_all_cpus();
693
	}
694 695

	return err;
696 697
}

698 699 700
/* prepare/enable/disable routines */
/* sysctl functions */
#ifdef CONFIG_SYSCTL
701 702
static void watchdog_disable_all_cpus(void)
{
703 704
	if (watchdog_running) {
		watchdog_running = 0;
705
		smpboot_unregister_percpu_thread(&watchdog_threads);
706
	}
707 708
}

709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731
/*
 * Update the run state of the lockup detectors.
 */
static int proc_watchdog_update(void)
{
	int err = 0;

	/*
	 * Watchdog threads won't be started if they are already active.
	 * The 'watchdog_running' variable in watchdog_*_all_cpus() takes
	 * care of this. If those threads are already active, the sample
	 * period will be updated and the lockup detectors will be enabled
	 * or disabled 'on the fly'.
	 */
	if (watchdog_enabled && watchdog_thresh)
		err = watchdog_enable_all_cpus(true);
	else
		watchdog_disable_all_cpus();

	return err;

}

732 733
static DEFINE_MUTEX(watchdog_proc_mutex);

734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798
/*
 * common function for watchdog, nmi_watchdog and soft_watchdog parameter
 *
 * caller             | table->data points to | 'which' contains the flag(s)
 * -------------------|-----------------------|-----------------------------
 * proc_watchdog      | watchdog_user_enabled | NMI_WATCHDOG_ENABLED or'ed
 *                    |                       | with SOFT_WATCHDOG_ENABLED
 * -------------------|-----------------------|-----------------------------
 * proc_nmi_watchdog  | nmi_watchdog_enabled  | NMI_WATCHDOG_ENABLED
 * -------------------|-----------------------|-----------------------------
 * proc_soft_watchdog | soft_watchdog_enabled | SOFT_WATCHDOG_ENABLED
 */
static int proc_watchdog_common(int which, struct ctl_table *table, int write,
				void __user *buffer, size_t *lenp, loff_t *ppos)
{
	int err, old, new;
	int *watchdog_param = (int *)table->data;

	mutex_lock(&watchdog_proc_mutex);

	/*
	 * If the parameter is being read return the state of the corresponding
	 * bit(s) in 'watchdog_enabled', else update 'watchdog_enabled' and the
	 * run state of the lockup detectors.
	 */
	if (!write) {
		*watchdog_param = (watchdog_enabled & which) != 0;
		err = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
	} else {
		err = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
		if (err)
			goto out;

		/*
		 * There is a race window between fetching the current value
		 * from 'watchdog_enabled' and storing the new value. During
		 * this race window, watchdog_nmi_enable() can sneak in and
		 * clear the NMI_WATCHDOG_ENABLED bit in 'watchdog_enabled'.
		 * The 'cmpxchg' detects this race and the loop retries.
		 */
		do {
			old = watchdog_enabled;
			/*
			 * If the parameter value is not zero set the
			 * corresponding bit(s), else clear it(them).
			 */
			if (*watchdog_param)
				new = old | which;
			else
				new = old & ~which;
		} while (cmpxchg(&watchdog_enabled, old, new) != old);

		/*
		 * Update the run state of the lockup detectors.
		 * Restore 'watchdog_enabled' on failure.
		 */
		err = proc_watchdog_update();
		if (err)
			watchdog_enabled = old;
	}
out:
	mutex_unlock(&watchdog_proc_mutex);
	return err;
}

799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856
/*
 * /proc/sys/kernel/watchdog
 */
int proc_watchdog(struct ctl_table *table, int write,
		  void __user *buffer, size_t *lenp, loff_t *ppos)
{
	return proc_watchdog_common(NMI_WATCHDOG_ENABLED|SOFT_WATCHDOG_ENABLED,
				    table, write, buffer, lenp, ppos);
}

/*
 * /proc/sys/kernel/nmi_watchdog
 */
int proc_nmi_watchdog(struct ctl_table *table, int write,
		      void __user *buffer, size_t *lenp, loff_t *ppos)
{
	return proc_watchdog_common(NMI_WATCHDOG_ENABLED,
				    table, write, buffer, lenp, ppos);
}

/*
 * /proc/sys/kernel/soft_watchdog
 */
int proc_soft_watchdog(struct ctl_table *table, int write,
			void __user *buffer, size_t *lenp, loff_t *ppos)
{
	return proc_watchdog_common(SOFT_WATCHDOG_ENABLED,
				    table, write, buffer, lenp, ppos);
}

/*
 * /proc/sys/kernel/watchdog_thresh
 */
int proc_watchdog_thresh(struct ctl_table *table, int write,
			 void __user *buffer, size_t *lenp, loff_t *ppos)
{
	int err, old;

	mutex_lock(&watchdog_proc_mutex);

	old = ACCESS_ONCE(watchdog_thresh);
	err = proc_dointvec_minmax(table, write, buffer, lenp, ppos);

	if (err || !write)
		goto out;

	/*
	 * Update the sample period.
	 * Restore 'watchdog_thresh' on failure.
	 */
	set_sample_period();
	err = proc_watchdog_update();
	if (err)
		watchdog_thresh = old;
out:
	mutex_unlock(&watchdog_proc_mutex);
	return err;
}
857 858
#endif /* CONFIG_SYSCTL */

859
void __init lockup_detector_init(void)
860
{
861
	set_sample_period();
862

863
	if (watchdog_enabled)
864
		watchdog_enable_all_cpus(false);
865
}