sl82c105.c 12.1 KB
Newer Older
Linus Torvalds's avatar
Linus Torvalds committed
1 2 3 4 5 6 7 8 9 10 11 12 13
/*
 * linux/drivers/ide/pci/sl82c105.c
 *
 * SL82C105/Winbond 553 IDE driver
 *
 * Maintainer unknown.
 *
 * Drive tuning added from Rebel.com's kernel sources
 *  -- Russell King (15/11/98) linux@arm.linux.org.uk
 * 
 * Merge in Russell's HW workarounds, fix various problems
 * with the timing registers setup.
 *  -- Benjamin Herrenschmidt (01/11/03) benh@kernel.crashing.org
14 15
 *
 * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
Linus Torvalds's avatar
Linus Torvalds committed
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
 */

#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/pci.h>
#include <linux/ide.h>

#include <asm/io.h>
#include <asm/dma.h>

#undef DEBUG

#ifdef DEBUG
#define DBG(arg) printk arg
#else
#define DBG(fmt,...)
#endif
/*
 * SL82C105 PCI config register 0x40 bits.
 */
#define CTRL_IDE_IRQB   (1 << 30)
#define CTRL_IDE_IRQA   (1 << 28)
#define CTRL_LEGIRQ     (1 << 11)
#define CTRL_P1F16      (1 << 5)
#define CTRL_P1EN       (1 << 4)
#define CTRL_P0F16      (1 << 1)
#define CTRL_P0EN       (1 << 0)

/*
52 53
 * Convert a PIO mode and cycle time to the required on/off times
 * for the interface.  This has protection against runaway timings.
Linus Torvalds's avatar
Linus Torvalds committed
54
 */
55
static unsigned int get_pio_timings(ide_pio_data_t *p)
Linus Torvalds's avatar
Linus Torvalds committed
56
{
57
	unsigned int cmd_on, cmd_off;
Linus Torvalds's avatar
Linus Torvalds committed
58

59
	cmd_on  = (ide_pio_timings[p->pio_mode].active_time + 29) / 30;
Linus Torvalds's avatar
Linus Torvalds committed
60 61 62 63 64 65 66 67 68 69 70 71
	cmd_off = (p->cycle_time - 30 * cmd_on + 29) / 30;

	if (cmd_on == 0)
		cmd_on = 1;

	if (cmd_off == 0)
		cmd_off = 1;

	return (cmd_on - 1) << 8 | (cmd_off - 1) | (p->use_iordy ? 0x40 : 0x00);
}

/*
72
 * Configure the chipset for PIO mode.
Linus Torvalds's avatar
Linus Torvalds committed
73
 */
74
static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio)
Linus Torvalds's avatar
Linus Torvalds committed
75
{
76 77
	struct pci_dev *dev	= HWIF(drive)->pci_dev;
	int reg			= 0x44 + drive->dn * 4;
Linus Torvalds's avatar
Linus Torvalds committed
78
	ide_pio_data_t p;
79
	u16 drv_ctrl;
Linus Torvalds's avatar
Linus Torvalds committed
80

81
	DBG(("sl82c105_tune_pio(drive:%s, pio:%u)\n", drive->name, pio));
Linus Torvalds's avatar
Linus Torvalds committed
82 83 84

	pio = ide_get_best_pio_mode(drive, pio, 5, &p);

85 86 87 88 89 90 91 92
	drv_ctrl = get_pio_timings(&p);

	/*
	 * Store the PIO timings so that we can restore them
	 * in case DMA will be turned off...
	 */
	drive->drive_data &= 0xffff0000;
	drive->drive_data |= drv_ctrl;
Linus Torvalds's avatar
Linus Torvalds committed
93

94
	if (!drive->using_dma) {
Linus Torvalds's avatar
Linus Torvalds committed
95 96 97 98
		/*
		 * If we are actually using MW DMA, then we can not
		 * reprogram the interface drive control register.
		 */
99 100
		pci_write_config_word(dev, reg,  drv_ctrl);
		pci_read_config_word (dev, reg, &drv_ctrl);
Linus Torvalds's avatar
Linus Torvalds committed
101
	}
102 103 104 105 106

	printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name,
	       ide_xfer_verbose(pio + XFER_PIO_0), p.cycle_time, drv_ctrl);

	return pio;
Linus Torvalds's avatar
Linus Torvalds committed
107 108
}

109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160
/*
 * Configure the drive and chipset for a new transfer speed.
 */
static int sl82c105_tune_chipset(ide_drive_t *drive, u8 speed)
{
	static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200};
	u16 drv_ctrl;

 	DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n",
	     drive->name, ide_xfer_verbose(speed)));

	speed = ide_rate_filter(drive, speed);

	switch (speed) {
	case XFER_MW_DMA_2:
	case XFER_MW_DMA_1:
	case XFER_MW_DMA_0:
		drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];

		/*
		 * Store the DMA timings so that we can actually program
		 * them when DMA will be turned on...
		 */
		drive->drive_data &= 0x0000ffff;
		drive->drive_data |= (unsigned long)drv_ctrl << 16;

		/*
		 * If we are already using DMA, we just reprogram
		 * the drive control register.
		 */
		if (drive->using_dma) {
			struct pci_dev *dev	= HWIF(drive)->pci_dev;
			int reg 		= 0x44 + drive->dn * 4;

			pci_write_config_word(dev, reg, drv_ctrl);
		}
		break;
	case XFER_PIO_5:
	case XFER_PIO_4:
	case XFER_PIO_3:
	case XFER_PIO_2:
	case XFER_PIO_1:
	case XFER_PIO_0:
		(void) sl82c105_tune_pio(drive, speed - XFER_PIO_0);
		break;
	default:
		return -1;
	}

	return ide_config_drive_speed(drive, speed);
}

Linus Torvalds's avatar
Linus Torvalds committed
161
/*
162
 * Check to see if the drive and chipset are capable of DMA mode.
Linus Torvalds's avatar
Linus Torvalds committed
163
 */
164
static int sl82c105_ide_dma_check(ide_drive_t *drive)
Linus Torvalds's avatar
Linus Torvalds committed
165
{
166
	DBG(("sl82c105_ide_dma_check(drive:%s)\n", drive->name));
Linus Torvalds's avatar
Linus Torvalds committed
167

168
	if (ide_tune_dma(drive))
169
		return 0;
Linus Torvalds's avatar
Linus Torvalds committed
170

171
	return -1;
Linus Torvalds's avatar
Linus Torvalds committed
172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197
}

/*
 * The SL82C105 holds off all IDE interrupts while in DMA mode until
 * all DMA activity is completed.  Sometimes this causes problems (eg,
 * when the drive wants to report an error condition).
 *
 * 0x7e is a "chip testing" register.  Bit 2 resets the DMA controller
 * state machine.  We need to kick this to work around various bugs.
 */
static inline void sl82c105_reset_host(struct pci_dev *dev)
{
	u16 val;

	pci_read_config_word(dev, 0x7e, &val);
	pci_write_config_word(dev, 0x7e, val | (1 << 2));
	pci_write_config_word(dev, 0x7e, val & ~(1 << 2));
}

/*
 * If we get an IRQ timeout, it might be that the DMA state machine
 * got confused.  Fix from Todd Inglett.  Details from Winbond.
 *
 * This function is called when the IDE timer expires, the drive
 * indicates that it is READY, and we were waiting for DMA to complete.
 */
198
static int sl82c105_ide_dma_lostirq(ide_drive_t *drive)
Linus Torvalds's avatar
Linus Torvalds committed
199
{
200 201 202 203
	ide_hwif_t *hwif	= HWIF(drive);
	struct pci_dev *dev	= hwif->pci_dev;
	u32 val, mask		= hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA;
	u8 dma_cmd;
Linus Torvalds's avatar
Linus Torvalds committed
204

205
	printk("sl82c105: lost IRQ, resetting host\n");
Linus Torvalds's avatar
Linus Torvalds committed
206 207 208 209 210 211 212 213 214 215 216 217

	/*
	 * Check the raw interrupt from the drive.
	 */
	pci_read_config_dword(dev, 0x40, &val);
	if (val & mask)
		printk("sl82c105: drive was requesting IRQ, but host lost it\n");

	/*
	 * Was DMA enabled?  If so, disable it - we're resetting the
	 * host.  The IDE layer will be handling the drive for us.
	 */
218 219 220
	dma_cmd = inb(hwif->dma_command);
	if (dma_cmd & 1) {
		outb(dma_cmd & ~1, hwif->dma_command);
Linus Torvalds's avatar
Linus Torvalds committed
221 222 223 224 225
		printk("sl82c105: DMA was enabled\n");
	}

	sl82c105_reset_host(dev);

226
	/* __ide_dma_lostirq would return 1, so we do as well */
Linus Torvalds's avatar
Linus Torvalds committed
227 228 229 230 231 232 233 234 235 236 237
	return 1;
}

/*
 * ATAPI devices can cause the SL82C105 DMA state machine to go gaga.
 * Winbond recommend that the DMA state machine is reset prior to
 * setting the bus master DMA enable bit.
 *
 * The generic IDE core will have disabled the BMEN bit before this
 * function is called.
 */
238
static void sl82c105_dma_start(ide_drive_t *drive)
Linus Torvalds's avatar
Linus Torvalds committed
239
{
240 241
	ide_hwif_t *hwif	= HWIF(drive);
	struct pci_dev *dev	= hwif->pci_dev;
Linus Torvalds's avatar
Linus Torvalds committed
242 243 244 245 246 247 248

	sl82c105_reset_host(dev);
	ide_dma_start(drive);
}

static int sl82c105_ide_dma_timeout(ide_drive_t *drive)
{
249 250
	ide_hwif_t *hwif	= HWIF(drive);
	struct pci_dev *dev	= hwif->pci_dev;
Linus Torvalds's avatar
Linus Torvalds committed
251 252 253 254 255 256 257

	DBG(("sl82c105_ide_dma_timeout(drive:%s)\n", drive->name));

	sl82c105_reset_host(dev);
	return __ide_dma_timeout(drive);
}

258
static int sl82c105_ide_dma_on(ide_drive_t *drive)
Linus Torvalds's avatar
Linus Torvalds committed
259
{
260 261 262
	struct pci_dev *dev	= HWIF(drive)->pci_dev;
	int rc, reg 		= 0x44 + drive->dn * 4;

Linus Torvalds's avatar
Linus Torvalds committed
263 264
	DBG(("sl82c105_ide_dma_on(drive:%s)\n", drive->name));

265 266
	rc = __ide_dma_on(drive);
	if (rc == 0) {
267
		pci_write_config_word(dev, reg, drive->drive_data >> 16);
268 269 270 271

		printk(KERN_INFO "%s: DMA enabled\n", drive->name);
	}
	return rc;
Linus Torvalds's avatar
Linus Torvalds committed
272 273
}

274
static void sl82c105_dma_off_quietly(ide_drive_t *drive)
Linus Torvalds's avatar
Linus Torvalds committed
275
{
276 277
	struct pci_dev *dev	= HWIF(drive)->pci_dev;
	int reg 		= 0x44 + drive->dn * 4;
Linus Torvalds's avatar
Linus Torvalds committed
278

279 280
	DBG(("sl82c105_dma_off_quietly(drive:%s)\n", drive->name));

281 282
	pci_write_config_word(dev, reg, drive->drive_data);

283
	ide_dma_off_quietly(drive);
Linus Torvalds's avatar
Linus Torvalds committed
284 285 286 287 288 289 290 291 292 293 294
}

/*
 * Ok, that is nasty, but we must make sure the DMA timings
 * won't be used for a PIO access. The solution here is
 * to make sure the 16 bits mode is diabled on the channel
 * when DMA is enabled, thus causing the chip to use PIO0
 * timings for those operations.
 */
static void sl82c105_selectproc(ide_drive_t *drive)
{
295 296
	ide_hwif_t *hwif	= HWIF(drive);
	struct pci_dev *dev	= hwif->pci_dev;
Linus Torvalds's avatar
Linus Torvalds committed
297 298 299 300 301
	u32 val, old, mask;

	//DBG(("sl82c105_selectproc(drive:%s)\n", drive->name));

	mask = hwif->channel ? CTRL_P1F16 : CTRL_P0F16;
302
	old = val = (u32)pci_get_drvdata(dev);
Linus Torvalds's avatar
Linus Torvalds committed
303 304 305 306 307 308
	if (drive->using_dma)
		val &= ~mask;
	else
		val |= mask;
	if (old != val) {
		pci_write_config_dword(dev, 0x40, val);	
309
		pci_set_drvdata(dev, (void *)val);
Linus Torvalds's avatar
Linus Torvalds committed
310 311 312 313 314 315 316 317 318
	}
}

/*
 * ATA reset will clear the 16 bits mode in the control
 * register, we need to update our cache
 */
static void sl82c105_resetproc(ide_drive_t *drive)
{
319
	struct pci_dev *dev = HWIF(drive)->pci_dev;
Linus Torvalds's avatar
Linus Torvalds committed
320 321 322 323 324
	u32 val;

	DBG(("sl82c105_resetproc(drive:%s)\n", drive->name));

	pci_read_config_dword(dev, 0x40, &val);
325
	pci_set_drvdata(dev, (void *)val);
Linus Torvalds's avatar
Linus Torvalds committed
326 327 328 329 330 331
}
	
/*
 * We only deal with PIO mode here - DMA mode 'using_dma' is not
 * initialised at the point that this function is called.
 */
332
static void sl82c105_tune_drive(ide_drive_t *drive, u8 pio)
Linus Torvalds's avatar
Linus Torvalds committed
333
{
334
	DBG(("sl82c105_tune_drive(drive:%s, pio:%u)\n", drive->name, pio));
Linus Torvalds's avatar
Linus Torvalds committed
335

336 337
	pio = sl82c105_tune_pio(drive, pio);
	(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
Linus Torvalds's avatar
Linus Torvalds committed
338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380
}

/*
 * Return the revision of the Winbond bridge
 * which this function is part of.
 */
static unsigned int sl82c105_bridge_revision(struct pci_dev *dev)
{
	struct pci_dev *bridge;
	u8 rev;

	/*
	 * The bridge should be part of the same device, but function 0.
	 */
	bridge = pci_find_slot(dev->bus->number,
			       PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
	if (!bridge)
		return -1;

	/*
	 * Make sure it is a Winbond 553 and is an ISA bridge.
	 */
	if (bridge->vendor != PCI_VENDOR_ID_WINBOND ||
	    bridge->device != PCI_DEVICE_ID_WINBOND_83C553 ||
	    bridge->class >> 8 != PCI_CLASS_BRIDGE_ISA)
		return -1;

	/*
	 * We need to find function 0's revision, not function 1
	 */
	pci_read_config_byte(bridge, PCI_REVISION_ID, &rev);

	return rev;
}

/*
 * Enable the PCI device
 * 
 * --BenH: It's arch fixup code that should enable channels that
 * have not been enabled by firmware. I decided we can still enable
 * channel 0 here at least, but channel 1 has to be enabled by
 * firmware or arch code. We still set both to 16 bits mode.
 */
381
static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const char *msg)
Linus Torvalds's avatar
Linus Torvalds committed
382 383 384 385 386 387 388 389
{
	u32 val;

	DBG(("init_chipset_sl82c105()\n"));

	pci_read_config_dword(dev, 0x40, &val);
	val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
	pci_write_config_dword(dev, 0x40, val);
390
	pci_set_drvdata(dev, (void *)val);
Linus Torvalds's avatar
Linus Torvalds committed
391 392 393 394 395

	return dev->irq;
}

/*
396
 * Initialise IDE channel
Linus Torvalds's avatar
Linus Torvalds committed
397
 */
398
static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
Linus Torvalds's avatar
Linus Torvalds committed
399
{
400
	unsigned int rev;
401

Linus Torvalds's avatar
Linus Torvalds committed
402 403
	DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index));

404
	hwif->tuneproc		= &sl82c105_tune_drive;
405
	hwif->speedproc 	= &sl82c105_tune_chipset;
406 407 408 409 410 411 412 413 414
	hwif->selectproc	= &sl82c105_selectproc;
	hwif->resetproc 	= &sl82c105_resetproc;

	/*
	 * We support 32-bit I/O on this interface, and
	 * it doesn't have problems with interrupts.
	 */
	hwif->drives[0].io_32bit = hwif->drives[1].io_32bit = 1;
	hwif->drives[0].unmask   = hwif->drives[1].unmask   = 1;
415 416 417 418 419

	/*
	 * We always autotune PIO,  this is done before DMA is checked,
	 * so there's no risk of accidentally disabling DMA
	 */
420
	hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
Linus Torvalds's avatar
Linus Torvalds committed
421 422 423 424

	if (!hwif->dma_base)
		return;

425 426 427 428 429 430
	rev = sl82c105_bridge_revision(hwif->pci_dev);
	if (rev <= 5) {
		/*
		 * Never ever EVER under any circumstances enable
		 * DMA when the bridge is this old.
		 */
431 432 433
		printk("    %s: Winbond W83C553 bridge revision %d, "
		       "BM-DMA disabled\n", hwif->name, rev);
		return;
434
	}
435 436

	hwif->atapi_dma  = 1;
437
	hwif->mwdma_mask = 0x07;
438 439 440 441 442 443 444 445 446 447 448 449 450 451

	hwif->ide_dma_check		= &sl82c105_ide_dma_check;
	hwif->ide_dma_on		= &sl82c105_ide_dma_on;
	hwif->dma_off_quietly		= &sl82c105_dma_off_quietly;
	hwif->ide_dma_lostirq		= &sl82c105_ide_dma_lostirq;
	hwif->dma_start			= &sl82c105_dma_start;
	hwif->ide_dma_timeout		= &sl82c105_ide_dma_timeout;

	if (!noautodma)
		hwif->autodma = 1;
	hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;

	if (hwif->mate)
		hwif->serialized = hwif->mate->serialized = 1;
Linus Torvalds's avatar
Linus Torvalds committed
452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469
}

static ide_pci_device_t sl82c105_chipset __devinitdata = {
	.name		= "W82C105",
	.init_chipset	= init_chipset_sl82c105,
	.init_hwif	= init_hwif_sl82c105,
	.channels	= 2,
	.autodma	= NOAUTODMA,
	.enablebits	= {{0x40,0x01,0x01}, {0x40,0x10,0x10}},
	.bootable	= ON_BOARD,
};

static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
	return ide_setup_pci_device(dev, &sl82c105_chipset);
}

static struct pci_device_id sl82c105_pci_tbl[] = {
470
	{ PCI_DEVICE(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105), 0},
Linus Torvalds's avatar
Linus Torvalds committed
471 472 473 474 475 476 477 478 479 480
	{ 0, },
};
MODULE_DEVICE_TABLE(pci, sl82c105_pci_tbl);

static struct pci_driver driver = {
	.name		= "W82C105_IDE",
	.id_table	= sl82c105_pci_tbl,
	.probe		= sl82c105_init_one,
};

481
static int __init sl82c105_ide_init(void)
Linus Torvalds's avatar
Linus Torvalds committed
482 483 484 485 486 487 488 489
{
	return ide_pci_register_driver(&driver);
}

module_init(sl82c105_ide_init);

MODULE_DESCRIPTION("PCI driver module for W82C105 IDE");
MODULE_LICENSE("GPL");