cfg80211.h 103 KB
Newer Older
1 2
#ifndef __NET_CFG80211_H
#define __NET_CFG80211_H
Johannes Berg's avatar
Johannes Berg committed
3 4 5
/*
 * 802.11 device and configuration interface
 *
6
 * Copyright 2006-2010	Johannes Berg <johannes@sipsolutions.net>
Johannes Berg's avatar
Johannes Berg committed
7 8 9 10 11
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
12

Johannes Berg's avatar
Johannes Berg committed
13 14 15
#include <linux/netdevice.h>
#include <linux/debugfs.h>
#include <linux/list.h>
16 17
#include <linux/netlink.h>
#include <linux/skbuff.h>
18
#include <linux/nl80211.h>
19 20
#include <linux/if_ether.h>
#include <linux/ieee80211.h>
Johannes Berg's avatar
Johannes Berg committed
21 22
#include <net/regulatory.h>

23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
/**
 * DOC: Introduction
 *
 * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges
 * userspace and drivers, and offers some utility functionality associated
 * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used
 * by all modern wireless drivers in Linux, so that they offer a consistent
 * API through nl80211. For backward compatibility, cfg80211 also offers
 * wireless extensions to userspace, but hides them from drivers completely.
 *
 * Additionally, cfg80211 contains code to help enforce regulatory spectrum
 * use restrictions.
 */


/**
 * DOC: Device registration
 *
 * In order for a driver to use cfg80211, it must register the hardware device
 * with cfg80211. This happens through a number of hardware capability structs
 * described below.
 *
 * The fundamental structure for each device is the 'wiphy', of which each
 * instance describes a physical wireless device connected to the system. Each
 * such wiphy can have zero, one, or many virtual interfaces associated with
 * it, which need to be identified as such by pointing the network interface's
 * @ieee80211_ptr pointer to a &struct wireless_dev which further describes
 * the wireless part of the interface, normally this struct is embedded in the
 * network interface's private data area. Drivers can optionally allow creating
 * or destroying virtual interfaces on the fly, but without at least one or the
 * ability to create some the wireless device isn't useful.
 *
 * Each wiphy structure contains device capability information, and also has
 * a pointer to the various operations the driver offers. The definitions and
 * structures here describe these capabilities in detail.
 */

60
/*
Johannes Berg's avatar
Johannes Berg committed
61 62 63 64 65 66 67 68
 * wireless hardware capability structures
 */

/**
 * enum ieee80211_band - supported frequency bands
 *
 * The bands are assigned this way because the supported
 * bitrates differ in these bands.
69
 *
Johannes Berg's avatar
Johannes Berg committed
70 71
 * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
 * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
Johannes Berg's avatar
Johannes Berg committed
72
 * @IEEE80211_NUM_BANDS: number of defined bands
73
 */
Johannes Berg's avatar
Johannes Berg committed
74
enum ieee80211_band {
75 76
	IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
	IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
Johannes Berg's avatar
Johannes Berg committed
77 78 79 80

	/* keep last */
	IEEE80211_NUM_BANDS
};
81

82
/**
Johannes Berg's avatar
Johannes Berg committed
83 84 85 86 87 88 89 90 91
 * enum ieee80211_channel_flags - channel flags
 *
 * Channel flags set by the regulatory control code.
 *
 * @IEEE80211_CHAN_DISABLED: This channel is disabled.
 * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
 *	on this channel.
 * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
 * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
92
 * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
Johannes Berg's avatar
Johannes Berg committed
93
 * 	is not permitted.
94
 * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
Johannes Berg's avatar
Johannes Berg committed
95
 * 	is not permitted.
96
 */
Johannes Berg's avatar
Johannes Berg committed
97 98 99 100 101
enum ieee80211_channel_flags {
	IEEE80211_CHAN_DISABLED		= 1<<0,
	IEEE80211_CHAN_PASSIVE_SCAN	= 1<<1,
	IEEE80211_CHAN_NO_IBSS		= 1<<2,
	IEEE80211_CHAN_RADAR		= 1<<3,
102 103
	IEEE80211_CHAN_NO_HT40PLUS	= 1<<4,
	IEEE80211_CHAN_NO_HT40MINUS	= 1<<5,
104 105
};

106
#define IEEE80211_CHAN_NO_HT40 \
107
	(IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
108

Johannes Berg's avatar
Johannes Berg committed
109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124
/**
 * struct ieee80211_channel - channel definition
 *
 * This structure describes a single channel for use
 * with cfg80211.
 *
 * @center_freq: center frequency in MHz
 * @hw_value: hardware-specific value for the channel
 * @flags: channel flags from &enum ieee80211_channel_flags.
 * @orig_flags: channel flags at registration time, used by regulatory
 *	code to support devices with additional restrictions
 * @band: band this channel belongs to.
 * @max_antenna_gain: maximum antenna gain in dBi
 * @max_power: maximum transmission power (in dBm)
 * @beacon_found: helper to regulatory code to indicate when a beacon
 *	has been found on this channel. Use regulatory_hint_found_beacon()
125
 *	to enable this, this is useful only on 5 GHz band.
Johannes Berg's avatar
Johannes Berg committed
126 127
 * @orig_mag: internal use
 * @orig_mpwr: internal use
Andy Green's avatar
Andy Green committed
128
 */
Johannes Berg's avatar
Johannes Berg committed
129 130 131 132 133 134 135 136 137 138 139 140
struct ieee80211_channel {
	enum ieee80211_band band;
	u16 center_freq;
	u16 hw_value;
	u32 flags;
	int max_antenna_gain;
	int max_power;
	bool beacon_found;
	u32 orig_flags;
	int orig_mag, orig_mpwr;
};

Andy Green's avatar
Andy Green committed
141
/**
Johannes Berg's avatar
Johannes Berg committed
142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160
 * enum ieee80211_rate_flags - rate flags
 *
 * Hardware/specification flags for rates. These are structured
 * in a way that allows using the same bitrate structure for
 * different bands/PHY modes.
 *
 * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
 *	preamble on this bitrate; only relevant in 2.4GHz band and
 *	with CCK rates.
 * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
 *	when used with 802.11a (on the 5 GHz band); filled by the
 *	core code when registering the wiphy.
 * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
 *	when used with 802.11b (on the 2.4 GHz band); filled by the
 *	core code when registering the wiphy.
 * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
 *	when used with 802.11g (on the 2.4 GHz band); filled by the
 *	core code when registering the wiphy.
 * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
Andy Green's avatar
Andy Green committed
161
 */
Johannes Berg's avatar
Johannes Berg committed
162 163 164 165 166 167 168
enum ieee80211_rate_flags {
	IEEE80211_RATE_SHORT_PREAMBLE	= 1<<0,
	IEEE80211_RATE_MANDATORY_A	= 1<<1,
	IEEE80211_RATE_MANDATORY_B	= 1<<2,
	IEEE80211_RATE_MANDATORY_G	= 1<<3,
	IEEE80211_RATE_ERP_G		= 1<<4,
};
Andy Green's avatar
Andy Green committed
169

Johannes Berg's avatar
Johannes Berg committed
170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188
/**
 * struct ieee80211_rate - bitrate definition
 *
 * This structure describes a bitrate that an 802.11 PHY can
 * operate with. The two values @hw_value and @hw_value_short
 * are only for driver use when pointers to this structure are
 * passed around.
 *
 * @flags: rate-specific flags
 * @bitrate: bitrate in units of 100 Kbps
 * @hw_value: driver/hardware value for this rate
 * @hw_value_short: driver/hardware value for this rate when
 *	short preamble is used
 */
struct ieee80211_rate {
	u32 flags;
	u16 bitrate;
	u16 hw_value, hw_value_short;
};
Andy Green's avatar
Andy Green committed
189

Johannes Berg's avatar
Johannes Berg committed
190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207
/**
 * struct ieee80211_sta_ht_cap - STA's HT capabilities
 *
 * This structure describes most essential parameters needed
 * to describe 802.11n HT capabilities for an STA.
 *
 * @ht_supported: is HT supported by the STA
 * @cap: HT capabilities map as described in 802.11n spec
 * @ampdu_factor: Maximum A-MPDU length factor
 * @ampdu_density: Minimum A-MPDU spacing
 * @mcs: Supported MCS rates
 */
struct ieee80211_sta_ht_cap {
	u16 cap; /* use IEEE80211_HT_CAP_ */
	bool ht_supported;
	u8 ampdu_factor;
	u8 ampdu_density;
	struct ieee80211_mcs_info mcs;
Andy Green's avatar
Andy Green committed
208 209
};

Johannes Berg's avatar
Johannes Berg committed
210 211 212 213 214 215 216 217 218 219 220 221 222 223
/**
 * struct ieee80211_supported_band - frequency band definition
 *
 * This structure describes a frequency band a wiphy
 * is able to operate in.
 *
 * @channels: Array of channels the hardware can operate in
 *	in this band.
 * @band: the band this structure represents
 * @n_channels: Number of channels in @channels
 * @bitrates: Array of bitrates the hardware can operate with
 *	in this band. Must be sorted to give a valid "supported
 *	rates" IE, i.e. CCK rates first, then OFDM.
 * @n_bitrates: Number of bitrates in @bitrates
Johannes Berg's avatar
Johannes Berg committed
224
 * @ht_cap: HT capabilities in this band
Johannes Berg's avatar
Johannes Berg committed
225 226 227 228 229 230 231 232 233
 */
struct ieee80211_supported_band {
	struct ieee80211_channel *channels;
	struct ieee80211_rate *bitrates;
	enum ieee80211_band band;
	int n_channels;
	int n_bitrates;
	struct ieee80211_sta_ht_cap ht_cap;
};
Andy Green's avatar
Andy Green committed
234

Johannes Berg's avatar
Johannes Berg committed
235 236 237
/*
 * Wireless hardware/device configuration structures and methods
 */
Andy Green's avatar
Andy Green committed
238

239 240 241 242 243 244 245 246 247 248 249 250 251 252 253
/**
 * DOC: Actions and configuration
 *
 * Each wireless device and each virtual interface offer a set of configuration
 * operations and other actions that are invoked by userspace. Each of these
 * actions is described in the operations structure, and the parameters these
 * operations use are described separately.
 *
 * Additionally, some operations are asynchronous and expect to get status
 * information via some functions that drivers need to call.
 *
 * Scanning and BSS list handling with its associated functionality is described
 * in a separate chapter.
 */

Johannes Berg's avatar
Johannes Berg committed
254 255
/**
 * struct vif_params - describes virtual interface parameters
256
 * @use_4addr: use 4-address frames
Johannes Berg's avatar
Johannes Berg committed
257 258
 */
struct vif_params {
259
       int use_4addr;
Johannes Berg's avatar
Johannes Berg committed
260
};
Andy Green's avatar
Andy Green committed
261

Johannes Berg's avatar
Johannes Berg committed
262
/**
263 264 265 266 267 268 269 270 271 272
 * struct key_params - key information
 *
 * Information about a key
 *
 * @key: key material
 * @key_len: length of key material
 * @cipher: cipher suite selector
 * @seq: sequence counter (IV/PN) for TKIP and CCMP keys, only used
 *	with the get_key() callback, must be in little endian,
 *	length given by @seq_len.
Johannes Berg's avatar
Johannes Berg committed
273
 * @seq_len: length of @seq.
274 275 276 277 278 279 280 281 282
 */
struct key_params {
	u8 *key;
	u8 *seq;
	int key_len;
	int seq_len;
	u32 cipher;
};

283 284 285
/**
 * enum survey_info_flags - survey information flags
 *
Johannes Berg's avatar
Johannes Berg committed
286
 * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in
287
 * @SURVEY_INFO_IN_USE: channel is currently being used
288 289 290 291 292
 * @SURVEY_INFO_CHANNEL_TIME: channel active time (in ms) was filled in
 * @SURVEY_INFO_CHANNEL_TIME_BUSY: channel busy time was filled in
 * @SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: extension channel busy time was filled in
 * @SURVEY_INFO_CHANNEL_TIME_RX: channel receive time was filled in
 * @SURVEY_INFO_CHANNEL_TIME_TX: channel transmit time was filled in
Johannes Berg's avatar
Johannes Berg committed
293
 *
294 295 296 297 298
 * Used by the driver to indicate which info in &struct survey_info
 * it has filled in during the get_survey().
 */
enum survey_info_flags {
	SURVEY_INFO_NOISE_DBM = 1<<0,
299
	SURVEY_INFO_IN_USE = 1<<1,
300 301 302 303 304
	SURVEY_INFO_CHANNEL_TIME = 1<<2,
	SURVEY_INFO_CHANNEL_TIME_BUSY = 1<<3,
	SURVEY_INFO_CHANNEL_TIME_EXT_BUSY = 1<<4,
	SURVEY_INFO_CHANNEL_TIME_RX = 1<<5,
	SURVEY_INFO_CHANNEL_TIME_TX = 1<<6,
305 306 307 308 309 310 311 312 313
};

/**
 * struct survey_info - channel survey response
 *
 * @channel: the channel this survey record reports, mandatory
 * @filled: bitflag of flags from &enum survey_info_flags
 * @noise: channel noise in dBm. This and all following fields are
 *     optional
314 315 316 317 318
 * @channel_time: amount of time in ms the radio spent on the channel
 * @channel_time_busy: amount of time the primary channel was sensed busy
 * @channel_time_ext_busy: amount of time the extension channel was sensed busy
 * @channel_time_rx: amount of time the radio spent receiving data
 * @channel_time_tx: amount of time the radio spent transmitting data
319
 *
Johannes Berg's avatar
Johannes Berg committed
320 321
 * Used by dump_survey() to report back per-channel survey information.
 *
322 323 324 325 326
 * This structure can later be expanded with things like
 * channel duty cycle etc.
 */
struct survey_info {
	struct ieee80211_channel *channel;
327 328 329 330 331
	u64 channel_time;
	u64 channel_time_busy;
	u64 channel_time_ext_busy;
	u64 channel_time_rx;
	u64 channel_time_tx;
332 333 334 335
	u32 filled;
	s8 noise;
};

336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355
/**
 * struct beacon_parameters - beacon parameters
 *
 * Used to configure the beacon for an interface.
 *
 * @head: head portion of beacon (before TIM IE)
 *     or %NULL if not changed
 * @tail: tail portion of beacon (after TIM IE)
 *     or %NULL if not changed
 * @interval: beacon interval or zero if not changed
 * @dtim_period: DTIM period or zero if not changed
 * @head_len: length of @head
 * @tail_len: length of @tail
 */
struct beacon_parameters {
	u8 *head, *tail;
	int interval, dtim_period;
	int head_len, tail_len;
};

356 357 358 359 360
/**
 * enum plink_action - actions to perform in mesh peers
 *
 * @PLINK_ACTION_INVALID: action 0 is reserved
 * @PLINK_ACTION_OPEN: start mesh peer link establishment
Johannes Berg's avatar
Johannes Berg committed
361
 * @PLINK_ACTION_BLOCK: block traffic from this mesh peer
362 363 364 365 366 367 368
 */
enum plink_actions {
	PLINK_ACTION_INVALID,
	PLINK_ACTION_OPEN,
	PLINK_ACTION_BLOCK,
};

369 370 371 372 373 374 375 376 377
/**
 * struct station_parameters - station parameters
 *
 * Used to change and create a new station.
 *
 * @vlan: vlan interface station should belong to
 * @supported_rates: supported rates in IEEE 802.11 format
 *	(or NULL for no change)
 * @supported_rates_len: number of supported rates
378 379 380 381
 * @sta_flags_mask: station flags that changed
 *	(bitmask of BIT(NL80211_STA_FLAG_...))
 * @sta_flags_set: station flags values
 *	(bitmask of BIT(NL80211_STA_FLAG_...))
382 383
 * @listen_interval: listen interval or -1 for no change
 * @aid: AID or zero for no change
Johannes Berg's avatar
Johannes Berg committed
384
 * @plink_action: plink action to take
385
 * @plink_state: set the peer link state for a station
Johannes Berg's avatar
Johannes Berg committed
386
 * @ht_capa: HT capabilities of station
387 388 389 390
 */
struct station_parameters {
	u8 *supported_rates;
	struct net_device *vlan;
391
	u32 sta_flags_mask, sta_flags_set;
392 393 394
	int listen_interval;
	u16 aid;
	u8 supported_rates_len;
395
	u8 plink_action;
396
	u8 plink_state;
397
	struct ieee80211_ht_cap *ht_capa;
398 399
};

400
/**
401
 * enum station_info_flags - station information flags
402
 *
403 404
 * Used by the driver to indicate which info in &struct station_info
 * it has filled in during get_station() or dump_station().
405
 *
406 407 408 409 410 411
 * @STATION_INFO_INACTIVE_TIME: @inactive_time filled
 * @STATION_INFO_RX_BYTES: @rx_bytes filled
 * @STATION_INFO_TX_BYTES: @tx_bytes filled
 * @STATION_INFO_LLID: @llid filled
 * @STATION_INFO_PLID: @plid filled
 * @STATION_INFO_PLINK_STATE: @plink_state filled
412
 * @STATION_INFO_SIGNAL: @signal filled
413
 * @STATION_INFO_TX_BITRATE: @txrate fields are filled
414
 *  (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
415 416
 * @STATION_INFO_RX_PACKETS: @rx_packets filled
 * @STATION_INFO_TX_PACKETS: @tx_packets filled
417 418
 * @STATION_INFO_TX_RETRIES: @tx_retries filled
 * @STATION_INFO_TX_FAILED: @tx_failed filled
419
 * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
420
 * @STATION_INFO_SIGNAL_AVG: @signal_avg filled
421
 * @STATION_INFO_RX_BITRATE: @rxrate fields are filled
422
 * @STATION_INFO_BSS_PARAM: @bss_param filled
423
 * @STATION_INFO_CONNECTED_TIME: @connected_time filled
424
 * @STATION_INFO_ASSOC_REQ_IES: @assoc_req_ies filled
425
 */
426 427 428 429 430 431 432
enum station_info_flags {
	STATION_INFO_INACTIVE_TIME	= 1<<0,
	STATION_INFO_RX_BYTES		= 1<<1,
	STATION_INFO_TX_BYTES		= 1<<2,
	STATION_INFO_LLID		= 1<<3,
	STATION_INFO_PLID		= 1<<4,
	STATION_INFO_PLINK_STATE	= 1<<5,
433 434
	STATION_INFO_SIGNAL		= 1<<6,
	STATION_INFO_TX_BITRATE		= 1<<7,
435 436
	STATION_INFO_RX_PACKETS		= 1<<8,
	STATION_INFO_TX_PACKETS		= 1<<9,
437 438
	STATION_INFO_TX_RETRIES		= 1<<10,
	STATION_INFO_TX_FAILED		= 1<<11,
439
	STATION_INFO_RX_DROP_MISC	= 1<<12,
440
	STATION_INFO_SIGNAL_AVG		= 1<<13,
441
	STATION_INFO_RX_BITRATE		= 1<<14,
442
	STATION_INFO_BSS_PARAM          = 1<<15,
443 444
	STATION_INFO_CONNECTED_TIME	= 1<<16,
	STATION_INFO_ASSOC_REQ_IES	= 1<<17
445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475
};

/**
 * enum station_info_rate_flags - bitrate info flags
 *
 * Used by the driver to indicate the specific rate transmission
 * type for 802.11n transmissions.
 *
 * @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled
 * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission
 * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
 */
enum rate_info_flags {
	RATE_INFO_FLAGS_MCS		= 1<<0,
	RATE_INFO_FLAGS_40_MHZ_WIDTH	= 1<<1,
	RATE_INFO_FLAGS_SHORT_GI	= 1<<2,
};

/**
 * struct rate_info - bitrate information
 *
 * Information about a receiving or transmitting bitrate
 *
 * @flags: bitflag of flags from &enum rate_info_flags
 * @mcs: mcs index if struct describes a 802.11n bitrate
 * @legacy: bitrate in 100kbit/s for 802.11abg
 */
struct rate_info {
	u8 flags;
	u8 mcs;
	u16 legacy;
476 477
};

478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508
/**
 * enum station_info_rate_flags - bitrate info flags
 *
 * Used by the driver to indicate the specific rate transmission
 * type for 802.11n transmissions.
 *
 * @BSS_PARAM_FLAGS_CTS_PROT: whether CTS protection is enabled
 * @BSS_PARAM_FLAGS_SHORT_PREAMBLE: whether short preamble is enabled
 * @BSS_PARAM_FLAGS_SHORT_SLOT_TIME: whether short slot time is enabled
 */
enum bss_param_flags {
	BSS_PARAM_FLAGS_CTS_PROT	= 1<<0,
	BSS_PARAM_FLAGS_SHORT_PREAMBLE	= 1<<1,
	BSS_PARAM_FLAGS_SHORT_SLOT_TIME	= 1<<2,
};

/**
 * struct sta_bss_parameters - BSS parameters for the attached station
 *
 * Information about the currently associated BSS
 *
 * @flags: bitflag of flags from &enum bss_param_flags
 * @dtim_period: DTIM period for the BSS
 * @beacon_interval: beacon interval
 */
struct sta_bss_parameters {
	u8 flags;
	u8 dtim_period;
	u16 beacon_interval;
};

509
/**
510
 * struct station_info - station information
511
 *
512
 * Station information filled by driver for get_station() and dump_station.
513
 *
514
 * @filled: bitflag of flags from &enum station_info_flags
515
 * @connected_time: time(in secs) since a station is last connected
516 517 518
 * @inactive_time: time since last station activity (tx/rx) in milliseconds
 * @rx_bytes: bytes received from this station
 * @tx_bytes: bytes transmitted to this station
519 520 521
 * @llid: mesh local link id
 * @plid: mesh peer link id
 * @plink_state: mesh peer link state
522
 * @signal: signal strength of last received packet in dBm
523
 * @signal_avg: signal strength average in dBm
524 525
 * @txrate: current unicast bitrate from this station
 * @rxrate: current unicast bitrate to this station
526 527
 * @rx_packets: packets received from this station
 * @tx_packets: packets transmitted to this station
528 529
 * @tx_retries: cumulative retry counts
 * @tx_failed: number of failed transmissions (retries exceeded, no ACK)
530
 * @rx_dropped_misc:  Dropped for un-specified reason.
531
 * @bss_param: current BSS parameters
532 533 534 535
 * @generation: generation number for nl80211 dumps.
 *	This number should increase every time the list of stations
 *	changes, i.e. when a station is added or removed, so that
 *	userspace can tell whether it got a consistent snapshot.
536 537 538 539 540
 * @assoc_req_ies: IEs from (Re)Association Request.
 *	This is used only when in AP mode with drivers that do not use
 *	user space MLME/SME implementation. The information is provided for
 *	the cfg80211_new_sta() calls to notify user space of the IEs.
 * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets.
541
 */
542
struct station_info {
543
	u32 filled;
544
	u32 connected_time;
545 546 547
	u32 inactive_time;
	u32 rx_bytes;
	u32 tx_bytes;
548 549 550
	u16 llid;
	u16 plid;
	u8 plink_state;
551
	s8 signal;
552
	s8 signal_avg;
553
	struct rate_info txrate;
554
	struct rate_info rxrate;
555 556
	u32 rx_packets;
	u32 tx_packets;
557 558
	u32 tx_retries;
	u32 tx_failed;
559
	u32 rx_dropped_misc;
560
	struct sta_bss_parameters bss_param;
561 562

	int generation;
563 564 565

	const u8 *assoc_req_ies;
	size_t assoc_req_ies_len;
566 567
};

568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587
/**
 * enum monitor_flags - monitor flags
 *
 * Monitor interface configuration flags. Note that these must be the bits
 * according to the nl80211 flags.
 *
 * @MONITOR_FLAG_FCSFAIL: pass frames with bad FCS
 * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP
 * @MONITOR_FLAG_CONTROL: pass control frames
 * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering
 * @MONITOR_FLAG_COOK_FRAMES: report frames after processing
 */
enum monitor_flags {
	MONITOR_FLAG_FCSFAIL		= 1<<NL80211_MNTR_FLAG_FCSFAIL,
	MONITOR_FLAG_PLCPFAIL		= 1<<NL80211_MNTR_FLAG_PLCPFAIL,
	MONITOR_FLAG_CONTROL		= 1<<NL80211_MNTR_FLAG_CONTROL,
	MONITOR_FLAG_OTHER_BSS		= 1<<NL80211_MNTR_FLAG_OTHER_BSS,
	MONITOR_FLAG_COOK_FRAMES	= 1<<NL80211_MNTR_FLAG_COOK_FRAMES,
};

588 589 590 591 592 593
/**
 * enum mpath_info_flags -  mesh path information flags
 *
 * Used by the driver to indicate which info in &struct mpath_info it has filled
 * in during get_station() or dump_station().
 *
Johannes Berg's avatar
Johannes Berg committed
594 595 596 597 598 599 600
 * @MPATH_INFO_FRAME_QLEN: @frame_qlen filled
 * @MPATH_INFO_SN: @sn filled
 * @MPATH_INFO_METRIC: @metric filled
 * @MPATH_INFO_EXPTIME: @exptime filled
 * @MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled
 * @MPATH_INFO_DISCOVERY_RETRIES: @discovery_retries filled
 * @MPATH_INFO_FLAGS: @flags filled
601 602 603
 */
enum mpath_info_flags {
	MPATH_INFO_FRAME_QLEN		= BIT(0),
604
	MPATH_INFO_SN			= BIT(1),
605 606 607 608 609 610 611 612 613 614 615 616 617 618
	MPATH_INFO_METRIC		= BIT(2),
	MPATH_INFO_EXPTIME		= BIT(3),
	MPATH_INFO_DISCOVERY_TIMEOUT	= BIT(4),
	MPATH_INFO_DISCOVERY_RETRIES	= BIT(5),
	MPATH_INFO_FLAGS		= BIT(6),
};

/**
 * struct mpath_info - mesh path information
 *
 * Mesh path information filled by driver for get_mpath() and dump_mpath().
 *
 * @filled: bitfield of flags from &enum mpath_info_flags
 * @frame_qlen: number of queued frames for this destination
619
 * @sn: target sequence number
620 621 622 623 624
 * @metric: metric (cost) of this mesh path
 * @exptime: expiration time for the mesh path from now, in msecs
 * @flags: mesh path flags
 * @discovery_timeout: total mesh path discovery timeout, in msecs
 * @discovery_retries: mesh path discovery retries
625 626 627 628
 * @generation: generation number for nl80211 dumps.
 *	This number should increase every time the list of mesh paths
 *	changes, i.e. when a station is added or removed, so that
 *	userspace can tell whether it got a consistent snapshot.
629 630 631 632
 */
struct mpath_info {
	u32 filled;
	u32 frame_qlen;
633
	u32 sn;
634 635 636 637 638
	u32 metric;
	u32 exptime;
	u32 discovery_timeout;
	u8 discovery_retries;
	u8 flags;
639 640

	int generation;
641 642
};

643 644 645 646 647 648 649 650 651 652 653
/**
 * struct bss_parameters - BSS parameters
 *
 * Used to change BSS parameters (mainly for AP mode).
 *
 * @use_cts_prot: Whether to use CTS protection
 *	(0 = no, 1 = yes, -1 = do not change)
 * @use_short_preamble: Whether the use of short preambles is allowed
 *	(0 = no, 1 = yes, -1 = do not change)
 * @use_short_slot_time: Whether the use of short slot time is allowed
 *	(0 = no, 1 = yes, -1 = do not change)
654 655 656
 * @basic_rates: basic rates in IEEE 802.11 format
 *	(or NULL for no change)
 * @basic_rates_len: number of basic rates
657
 * @ap_isolate: do not forward packets between connected stations
658 659
 * @ht_opmode: HT Operation mode
 * 	(u16 = opmode, -1 = do not change)
660 661 662 663 664
 */
struct bss_parameters {
	int use_cts_prot;
	int use_short_preamble;
	int use_short_slot_time;
665 666
	u8 *basic_rates;
	u8 basic_rates_len;
667
	int ap_isolate;
668
	int ht_opmode;
669
};
670

671 672 673 674 675
/*
 * struct mesh_config - 802.11s mesh configuration
 *
 * These parameters can be changed while the mesh is active.
 */
676 677 678 679 680 681 682 683 684
struct mesh_config {
	/* Timeouts in ms */
	/* Mesh plink management parameters */
	u16 dot11MeshRetryTimeout;
	u16 dot11MeshConfirmTimeout;
	u16 dot11MeshHoldingTimeout;
	u16 dot11MeshMaxPeerLinks;
	u8  dot11MeshMaxRetries;
	u8  dot11MeshTTL;
685 686
	/* ttl used in path selection information elements */
	u8  element_ttl;
687 688 689 690 691 692 693 694
	bool auto_open_plinks;
	/* HWMP parameters */
	u8  dot11MeshHWMPmaxPREQretries;
	u32 path_refresh_time;
	u16 min_discovery_timeout;
	u32 dot11MeshHWMPactivePathTimeout;
	u16 dot11MeshHWMPpreqMinInterval;
	u16 dot11MeshHWMPnetDiameterTraversalTime;
695
	u8  dot11MeshHWMPRootMode;
696 697
};

698 699 700 701
/**
 * struct mesh_setup - 802.11s mesh setup configuration
 * @mesh_id: the mesh ID
 * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes
702 703
 * @path_sel_proto: which path selection protocol to use
 * @path_metric: which metric to use
704 705
 * @ie: vendor information elements (optional)
 * @ie_len: length of vendor information elements
706 707
 * @is_authenticated: this mesh requires authentication
 * @is_secure: this mesh uses security
708 709 710 711 712 713
 *
 * These parameters are fixed when the mesh is created.
 */
struct mesh_setup {
	const u8 *mesh_id;
	u8 mesh_id_len;
714 715
	u8  path_sel_proto;
	u8  path_metric;
716 717
	const u8 *ie;
	u8 ie_len;
718
	bool is_authenticated;
719
	bool is_secure;
720 721
};

722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739
/**
 * struct ieee80211_txq_params - TX queue parameters
 * @queue: TX queue identifier (NL80211_TXQ_Q_*)
 * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
 * @cwmin: Minimum contention window [a value of the form 2^n-1 in the range
 *	1..32767]
 * @cwmax: Maximum contention window [a value of the form 2^n-1 in the range
 *	1..32767]
 * @aifs: Arbitration interframe space [0..255]
 */
struct ieee80211_txq_params {
	enum nl80211_txq_q queue;
	u16 txop;
	u16 cwmin;
	u16 cwmax;
	u8 aifs;
};

740 741 742
/* from net/wireless.h */
struct wiphy;

743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764
/**
 * DOC: Scanning and BSS list handling
 *
 * The scanning process itself is fairly simple, but cfg80211 offers quite
 * a bit of helper functionality. To start a scan, the scan operation will
 * be invoked with a scan definition. This scan definition contains the
 * channels to scan, and the SSIDs to send probe requests for (including the
 * wildcard, if desired). A passive scan is indicated by having no SSIDs to
 * probe. Additionally, a scan request may contain extra information elements
 * that should be added to the probe request. The IEs are guaranteed to be
 * well-formed, and will not exceed the maximum length the driver advertised
 * in the wiphy structure.
 *
 * When scanning finds a BSS, cfg80211 needs to be notified of that, because
 * it is responsible for maintaining the BSS list; the driver should not
 * maintain a list itself. For this notification, various functions exist.
 *
 * Since drivers do not maintain a BSS list, there are also a number of
 * functions to search for a BSS and obtain information about it from the
 * BSS structure cfg80211 maintains. The BSS list is also made available
 * to userspace.
 */
765

766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781
/**
 * struct cfg80211_ssid - SSID description
 * @ssid: the SSID
 * @ssid_len: length of the ssid
 */
struct cfg80211_ssid {
	u8 ssid[IEEE80211_MAX_SSID_LEN];
	u8 ssid_len;
};

/**
 * struct cfg80211_scan_request - scan request description
 *
 * @ssids: SSIDs to scan for (active scan only)
 * @n_ssids: number of SSIDs
 * @channels: channels to scan on.
782
 * @n_channels: total number of channels to scan
783 784
 * @ie: optional information element(s) to add into Probe Request or %NULL
 * @ie_len: length of ie in octets
785
 * @rates: bitmap of rates to advertise for each band
786
 * @wiphy: the wiphy this was for
787
 * @dev: the interface
Johannes Berg's avatar
Johannes Berg committed
788
 * @aborted: (internal) scan request was notified as aborted
789 790 791 792 793
 */
struct cfg80211_scan_request {
	struct cfg80211_ssid *ssids;
	int n_ssids;
	u32 n_channels;
794
	const u8 *ie;
795
	size_t ie_len;
796

797 798
	u32 rates[IEEE80211_NUM_BANDS];

799 800
	/* internal */
	struct wiphy *wiphy;
801
	struct net_device *dev;
Johannes Berg's avatar
Johannes Berg committed
802
	bool aborted;
803 804 805

	/* keep last */
	struct ieee80211_channel *channels[0];
806 807
};

808 809 810 811 812 813
/**
 * struct cfg80211_sched_scan_request - scheduled scan request description
 *
 * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
 * @n_ssids: number of SSIDs
 * @n_channels: total number of channels to scan
814
 * @interval: interval between each scheduled scan cycle
815 816 817 818 819 820 821 822 823 824
 * @ie: optional information element(s) to add into Probe Request or %NULL
 * @ie_len: length of ie in octets
 * @wiphy: the wiphy this was for
 * @dev: the interface
 * @channels: channels to scan
 */
struct cfg80211_sched_scan_request {
	struct cfg80211_ssid *ssids;
	int n_ssids;
	u32 n_channels;
825
	u32 interval;
826 827 828 829 830 831 832 833 834 835 836
	const u8 *ie;
	size_t ie_len;

	/* internal */
	struct wiphy *wiphy;
	struct net_device *dev;

	/* keep last */
	struct ieee80211_channel *channels[0];
};

837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855
/**
 * enum cfg80211_signal_type - signal type
 *
 * @CFG80211_SIGNAL_TYPE_NONE: no signal strength information available
 * @CFG80211_SIGNAL_TYPE_MBM: signal strength in mBm (100*dBm)
 * @CFG80211_SIGNAL_TYPE_UNSPEC: signal strength, increasing from 0 through 100
 */
enum cfg80211_signal_type {
	CFG80211_SIGNAL_TYPE_NONE,
	CFG80211_SIGNAL_TYPE_MBM,
	CFG80211_SIGNAL_TYPE_UNSPEC,
};

/**
 * struct cfg80211_bss - BSS description
 *
 * This structure describes a BSS (which may also be a mesh network)
 * for use in scan results and similar.
 *
Johannes Berg's avatar
Johannes Berg committed
856
 * @channel: channel this BSS is on
857 858 859 860 861
 * @bssid: BSSID of the BSS
 * @tsf: timestamp of last received update
 * @beacon_interval: the beacon interval as from the frame
 * @capability: the capability field in host byte order
 * @information_elements: the information elements (Note that there
862 863 864
 *	is no guarantee that these are well-formed!); this is a pointer to
 *	either the beacon_ies or proberesp_ies depending on whether Probe
 *	Response frame has been received
865
 * @len_information_elements: total length of the information elements
866 867 868 869
 * @beacon_ies: the information elements from the last Beacon frame
 * @len_beacon_ies: total length of the beacon_ies
 * @proberesp_ies: the information elements from the last Probe Response frame
 * @len_proberesp_ies: total length of the proberesp_ies
Johannes Berg's avatar
Johannes Berg committed
870
 * @signal: signal strength value (type depends on the wiphy's signal_type)
871
 * @free_priv: function pointer to free private data
872 873 874 875 876 877 878 879 880 881 882
 * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes
 */
struct cfg80211_bss {
	struct ieee80211_channel *channel;

	u8 bssid[ETH_ALEN];
	u64 tsf;
	u16 beacon_interval;
	u16 capability;
	u8 *information_elements;
	size_t len_information_elements;
883 884 885 886
	u8 *beacon_ies;
	size_t len_beacon_ies;
	u8 *proberesp_ies;
	size_t len_proberesp_ies;
887 888 889

	s32 signal;

890
	void (*free_priv)(struct cfg80211_bss *bss);
891 892 893
	u8 priv[0] __attribute__((__aligned__(sizeof(void *))));
};

894 895 896 897 898 899 900 901 902
/**
 * ieee80211_bss_get_ie - find IE with given ID
 * @bss: the bss to search
 * @ie: the IE ID
 * Returns %NULL if not found.
 */
const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);


903 904 905 906 907 908 909 910 911 912 913 914 915
/**
 * struct cfg80211_crypto_settings - Crypto settings
 * @wpa_versions: indicates which, if any, WPA versions are enabled
 *	(from enum nl80211_wpa_versions)
 * @cipher_group: group key cipher suite (or 0 if unset)
 * @n_ciphers_pairwise: number of AP supported unicast ciphers
 * @ciphers_pairwise: unicast key cipher suites
 * @n_akm_suites: number of AKM suites
 * @akm_suites: AKM suites
 * @control_port: Whether user space controls IEEE 802.1X port, i.e.,
 *	sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
 *	required to assume that the port is unauthorized until authorized by
 *	user space. Otherwise, port is marked authorized by default.
916 917 918 919
 * @control_port_ethertype: the control port protocol that should be
 *	allowed through even on unauthorized ports
 * @control_port_no_encrypt: TRUE to prevent encryption of control port
 *	protocol frames.
920 921 922 923 924 925 926 927 928
 */
struct cfg80211_crypto_settings {
	u32 wpa_versions;
	u32 cipher_group;
	int n_ciphers_pairwise;
	u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES];
	int n_akm_suites;
	u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
	bool control_port;
929 930
	__be16 control_port_ethertype;
	bool control_port_no_encrypt;
931 932
};

933 934 935 936 937
/**
 * struct cfg80211_auth_request - Authentication request data
 *
 * This structure provides information needed to complete IEEE 802.11
 * authentication.
Johannes Berg's avatar
Johannes Berg committed
938 939
 *
 * @bss: The BSS to authenticate with.
940 941 942
 * @auth_type: Authentication type (algorithm)
 * @ie: Extra IEs to add to Authentication frame or %NULL
 * @ie_len: Length of ie buffer in octets
Johannes Berg's avatar
Johannes Berg committed
943 944 945
 * @key_len: length of WEP key for shared key authentication
 * @key_idx: index of WEP key for shared key authentication
 * @key: WEP key for shared key authentication
946 947 948 949
 * @local_state_change: This is a request for a local state only, i.e., no
 *	Authentication frame is to be transmitted and authentication state is
 *	to be changed without having to wait for a response from the peer STA
 *	(AP).
950 951
 */
struct cfg80211_auth_request {
Johannes Berg's avatar
Johannes Berg committed
952
	struct cfg80211_bss *bss;
953 954
	const u8 *ie;
	size_t ie_len;
Johannes Berg's avatar
Johannes Berg committed
955
	enum nl80211_auth_type auth_type;
Johannes Berg's avatar
Johannes Berg committed
956 957
	const u8 *key;
	u8 key_len, key_idx;
958
	bool local_state_change;
959 960 961 962 963 964 965
};

/**
 * struct cfg80211_assoc_request - (Re)Association request data
 *
 * This structure provides information needed to complete IEEE 802.11
 * (re)association.
Johannes Berg's avatar
Johannes Berg committed
966
 * @bss: The BSS to associate with.
967 968
 * @ie: Extra IEs to add to (Re)Association Request frame or %NULL
 * @ie_len: Length of ie buffer in octets
969
 * @use_mfp: Use management frame protection (IEEE 802.11w) in this association
970
 * @crypto: crypto settings
971
 * @prev_bssid: previous BSSID, if not %NULL use reassociate frame
972 973
 */
struct cfg80211_assoc_request {
Johannes Berg's avatar
Johannes Berg committed
974
	struct cfg80211_bss *bss;
975
	const u8 *ie, *prev_bssid;
976
	size_t ie_len;
977
	struct cfg80211_crypto_settings crypto;
Johannes Berg's avatar
Johannes Berg committed
978
	bool use_mfp;
979 980 981 982 983 984 985 986
};

/**
 * struct cfg80211_deauth_request - Deauthentication request data
 *
 * This structure provides information needed to complete IEEE 802.11
 * deauthentication.
 *
Johannes Berg's avatar
Johannes Berg committed
987
 * @bss: the BSS to deauthenticate from
988 989
 * @ie: Extra IEs to add to Deauthentication frame or %NULL
 * @ie_len: Length of ie buffer in octets
Johannes Berg's avatar
Johannes Berg committed
990
 * @reason_code: The reason code for the deauthentication
991 992
 * @local_state_change: This is a request for a local state only, i.e., no
 *	Deauthentication frame is to be transmitted.
993 994
 */
struct cfg80211_deauth_request {
Johannes Berg's avatar
Johannes Berg committed
995
	struct cfg80211_bss *bss;
996 997
	const u8 *ie;
	size_t ie_len;
Johannes Berg's avatar
Johannes Berg committed
998
	u16 reason_code;
999
	bool local_state_change;
1000 1001 1002 1003 1004 1005 1006 1007
};

/**
 * struct cfg80211_disassoc_request - Disassociation request data
 *
 * This structure provides information needed to complete IEEE 802.11
 * disassocation.
 *
Johannes Berg's avatar
Johannes Berg committed
1008
 * @bss: the BSS to disassociate from
1009 1010
 * @ie: Extra IEs to add to Disassociation frame or %NULL
 * @ie_len: Length of ie buffer in octets
Johannes Berg's avatar
Johannes Berg committed
1011
 * @reason_code: The reason code for the disassociation
1012 1013
 * @local_state_change: This is a request for a local state only, i.e., no
 *	Disassociation frame is to be transmitted.
1014 1015
 */
struct cfg80211_disassoc_request {
Johannes Berg's avatar
Johannes Berg committed
1016
	struct cfg80211_bss *bss;
1017 1018
	const u8 *ie;
	size_t ie_len;
Johannes Berg's avatar
Johannes Berg committed
1019
	u16 reason_code;
1020
	bool local_state_change;
1021 1022
};

Johannes Berg's avatar
Johannes Berg committed
1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037
/**
 * struct cfg80211_ibss_params - IBSS parameters
 *
 * This structure defines the IBSS parameters for the join_ibss()
 * method.
 *
 * @ssid: The SSID, will always be non-null.
 * @ssid_len: The length of the SSID, will always be non-zero.
 * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not
 *	search for IBSSs with a different BSSID.
 * @channel: The channel to use if no IBSS can be found to join.
 * @channel_fixed: The channel should be fixed -- do not search for
 *	IBSSs to join on other channels.
 * @ie: information element(s) to include in the beacon
 * @ie_len: length of that
1038
 * @beacon_interval: beacon interval to use
Johannes Berg's avatar
Johannes Berg committed
1039 1040
 * @privacy: this is a protected network, keys will be configured
 *	after joining
1041
 * @basic_rates: bitmap of basic rates to use when creating the IBSS
1042
 * @mcast_rate: per-band multicast rate index + 1 (0: disabled)
Johannes Berg's avatar
Johannes Berg committed
1043 1044 1045 1046 1047 1048 1049
 */
struct cfg80211_ibss_params {
	u8 *ssid;
	u8 *bssid;
	struct ieee80211_channel *channel;
	u8 *ie;
	u8 ssid_len, ie_len;
1050
	u16 beacon_interval;
1051
	u32 basic_rates;
Johannes Berg's avatar
Johannes Berg committed
1052
	bool channel_fixed;
Johannes Berg's avatar
Johannes Berg committed
1053
	bool privacy;
1054
	int mcast_rate[IEEE80211_NUM_BANDS];
Johannes Berg's avatar
Johannes Berg committed
1055 1056
};

1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069
/**
 * struct cfg80211_connect_params - Connection parameters
 *
 * This structure provides information needed to complete IEEE 802.11
 * authentication and association.
 *
 * @channel: The channel to use or %NULL if not specified (auto-select based
 *	on scan results)
 * @bssid: The AP BSSID or %NULL if not specified (auto-select based on scan
 *	results)
 * @ssid: SSID
 * @ssid_len: Length of ssid in octets
 * @auth_type: Authentication type (algorithm)
Johannes Berg's avatar
Johannes Berg committed
1070 1071
 * @ie: IEs for association request
 * @ie_len: Length of assoc_ie in octets
1072 1073
 * @privacy: indicates whether privacy-enabled APs should be used
 * @crypto: crypto settings
Johannes Berg's avatar
Johannes Berg committed
1074 1075 1076
 * @key_len: length of WEP key for shared key authentication
 * @key_idx: index of WEP key for shared key authentication
 * @key: WEP key for shared key authentication
1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087
 */
struct cfg80211_connect_params {
	struct ieee80211_channel *channel;
	u8 *bssid;
	u8 *ssid;
	size_t ssid_len;
	enum nl80211_auth_type auth_type;
	u8 *ie;
	size_t ie_len;
	bool privacy;
	struct cfg80211_crypto_settings crypto;
Johannes Berg's avatar
Johannes Berg committed
1088 1089
	const u8 *key;
	u8 key_len, key_idx;
1090 1091
};

1092 1093
/**
 * enum wiphy_params_flags - set_wiphy_params bitfield values
Johannes Berg's avatar
Johannes Berg committed
1094 1095 1096 1097 1098
 * @WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed
 * @WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed
 * @WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed
 * @WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed
 * @WIPHY_PARAM_COVERAGE_CLASS: coverage class changed
1099 1100 1101 1102 1103 1104
 */
enum wiphy_params_flags {
	WIPHY_PARAM_RETRY_SHORT		= 1 << 0,
	WIPHY_PARAM_RETRY_LONG		= 1 << 1,
	WIPHY_PARAM_FRAG_THRESHOLD	= 1 << 2,
	WIPHY_PARAM_RTS_THRESHOLD	= 1 << 3,
1105
	WIPHY_PARAM_COVERAGE_CLASS	= 1 << 4,
1106 1107
};

Johannes Berg's avatar
Johannes Berg committed
1108 1109 1110 1111 1112 1113
/*
 * cfg80211_bitrate_mask - masks for bitrate control
 */
struct cfg80211_bitrate_mask {
	struct {
		u32 legacy;
1114 1115
		/* TODO: add support for masking MCS rates; e.g.: */
		/* u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; */
Johannes Berg's avatar
Johannes Berg committed
1116 1117
	} control[IEEE80211_NUM_BANDS];
};
Samuel Ortiz's avatar
Samuel Ortiz committed
1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130
/**
 * struct cfg80211_pmksa - PMK Security Association
 *
 * This structure is passed to the set/del_pmksa() method for PMKSA
 * caching.
 *
 * @bssid: The AP's BSSID.
 * @pmkid: The PMK material itself.
 */
struct cfg80211_pmksa {
	u8 *bssid;
	u8 *pmkid;
};
Johannes Berg's avatar
Johannes Berg committed
1131

1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156
/**
 * struct cfg80211_wowlan_trig_pkt_pattern - packet pattern
 * @mask: bitmask where to match pattern and where to ignore bytes,
 *	one bit per byte, in same format as nl80211
 * @pattern: bytes to match where bitmask is 1
 * @pattern_len: length of pattern (in bytes)
 *
 * Internal note: @mask and @pattern are allocated in one chunk of
 * memory, free @mask only!
 */
struct cfg80211_wowlan_trig_pkt_pattern {
	u8 *mask, *pattern;
	int pattern_len;
};

/**
 * struct cfg80211_wowlan - Wake on Wireless-LAN support info
 *
 * This structure defines the enabled WoWLAN triggers for the device.
 * @any: wake up on any activity -- special trigger if device continues
 *	operating as normal during suspend
 * @disconnect: wake up if getting disconnected
 * @magic_pkt: wake up on receiving magic packet
 * @patterns: wake up on receiving packet matching a pattern
 * @n_patterns: number of patterns
1157 1158 1159 1160
 * @gtk_rekey_failure: wake up on GTK rekey failure
 * @eap_identity_req: wake up on EAP identity request packet
 * @four_way_handshake: wake up on 4-way handshake
 * @rfkill_release: wake up when rfkill is released
1161 1162
 */
struct cfg80211_wowlan {
1163 1164 1165
	bool any, disconnect, magic_pkt, gtk_rekey_failure,
	     eap_identity_req, four_way_handshake,
	     rfkill_release;
1166 1167 1168 1169
	struct cfg80211_wowlan_trig_pkt_pattern *patterns;
	int n_patterns;
};

1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181
/**
 * struct cfg80211_gtk_rekey_data - rekey data
 * @kek: key encryption key
 * @kck: key confirmation key
 * @replay_ctr: replay counter
 */
struct cfg80211_gtk_rekey_data {
	u8 kek[NL80211_KEK_LEN];
	u8 kck[NL80211_KCK_LEN];
	u8 replay_ctr[NL80211_REPLAY_CTR_LEN];
};

1182 1183 1184 1185 1186 1187 1188 1189 1190
/**
 * struct cfg80211_ops - backend description for wireless configuration
 *
 * This struct is registered by fullmac card drivers and/or wireless stacks
 * in order to handle configuration requests on their interfaces.
 *
 * All callbacks except where otherwise noted should return 0
 * on success or a negative error code.
 *
1191 1192 1193 1194
 * All operations are currently invoked under rtnl for consistency with the
 * wireless extensions but this is subject to reevaluation as soon as this
 * code is used more widely and we have a first user without wext.
 *
1195 1196 1197
 * @suspend: wiphy device needs to be suspended. The variable @wow will
 *	be %NULL or contain the enabled Wake-on-Wireless triggers that are
 *	configured for the device.
Johannes Berg's avatar
Johannes Berg committed
1198 1199
 * @resume: wiphy device needs to be resumed
 *
Johannes Berg's avatar
Johannes Berg committed
1200
 * @add_virtual_intf: create a new virtual interface with the given name,
1201
 *	must set the struct wireless_dev's iftype. Beware: You must create
1202 1203
 *	the new netdev in the wiphy's network namespace! Returns the netdev,
 *	or an ERR_PTR.
1204 1205
 *
 * @del_virtual_intf: remove the virtual interface determined by ifindex.
1206
 *
Johannes Berg's avatar
Johannes Berg committed
1207 1208
 * @change_virtual_intf: change type/configuration of virtual interface,
 *	keep the struct wireless_dev's iftype updated.
1209
 *
1210 1211 1212 1213 1214 1215
 * @add_key: add a key with the given parameters. @mac_addr will be %NULL
 *	when adding a group key.
 *
 * @get_key: get information about the key with the given parameters.
 *	@mac_addr will be %NULL when requesting information for a group
 *	key. All pointers given to the @callback function need not be valid
1216 1217
 *	after it returns. This function should return an error if it is
 *	not possible to retrieve the key, -ENOENT if it doesn't exist.
1218 1219
 *
 * @del_key: remove a key given the @mac_addr (%NULL for a group key)
1220
 *	and @key_index, return -ENOENT if the key doesn't exist.
1221 1222
 *
 * @set_default_key: set the default key on an interface
1223
 *
1224 1225
 * @set_default_mgmt_key: set the default management frame key on an interface
 *
1226 1227
 * @set_rekey_data: give the data necessary for GTK rekeying to the driver
 *
1228 1229 1230 1231 1232 1233
 * @add_beacon: Add a beacon with given parameters, @head, @interval
 *	and @dtim_period will be valid, @tail is optional.
 * @set_beacon: Change the beacon parameters for an access point mode
 *	interface. This should reject the call when no beacon has been
 *	configured.
 * @del_beacon: Remove beacon configuration and stop sending the beacon.
1234 1235 1236 1237
 *
 * @add_station: Add a new station.
 * @del_station: Remove a station; @mac may be NULL to remove all stations.
 * @change_station: Modify a given station.
Johannes Berg's avatar
Johannes Berg committed
1238 1239 1240 1241 1242 1243 1244 1245
 * @get_station: get station information for the station identified by @mac
 * @dump_station: dump station callback -- resume dump at index @idx
 *
 * @add_mpath: add a fixed mesh path
 * @del_mpath: delete a given mesh path
 * @change_mpath: change a given mesh path
 * @get_mpath: get a mesh path for the given parameters
 * @dump_mpath: dump mesh path callback -- resume dump at index @idx
1246 1247
 * @join_mesh: join the mesh network with the specified parameters
 * @leave_mesh: leave the current mesh network
1248
 *
1249
 * @get_mesh_config: Get the current mesh configuration
1250
 *
1251
 * @update_mesh_config: Update mesh parameters on a running mesh.
1252 1253 1254
 *	The mask is a bitfield which tells us which parameters to
 *	set, and which to leave alone.
 *
1255
 * @change_bss: Modify parameters for a given BSS.
1256 1257
 *
 * @set_txq_params: Set TX queue parameters
1258
 *
1259 1260 1261 1262 1263
 * @set_channel: Set channel for a given wireless interface. Some devices
 *	may support multi-channel operation (by channel hopping) so cfg80211
 *	doesn't verify much. Note, however, that the passed netdev may be
 *	%NULL as well if the user requested changing the channel for the
 *	device itself, or for a monitor interface.
1264
 *
1265 1266 1267 1268
 * @scan: Request to do a scan. If returning zero, the scan request is given
 *	the driver, and will be valid until passed to cfg80211_scan_done().
 *	For scan results, call cfg80211_inform_bss(); you can call this outside
 *	the scan/scan_done bracket too.
1269 1270 1271 1272 1273
 *
 * @auth: Request to authenticate with the specified peer
 * @assoc: Request to (re)associate with the specified peer
 * @deauth: Request to deauthenticate from the specified peer
 * @disassoc: Request to disassociate from the specified peer
Johannes Berg's avatar
Johannes Berg committed
1274
 *
Samuel Ortiz's avatar
<