osp-capnet.py 49.8 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14
#!/usr/bin/env python

import geni.portal as portal
import geni.rspec.pg as RSpec
import geni.rspec.igext as IG
from lxml import etree as ET
import crypt
import random

# Don't want this as a param yet
TBURL = "http://www.emulab.net/downloads/openstack-setup-v26-capnet.tar.gz"
TBCMD = "sudo mkdir -p /root/setup && sudo -H /tmp/setup/setup-driver.sh 2>&1 | sudo tee /root/setup/setup-driver.log"
EXT_TARBALLS = []

15
CAPNET_TBURL = "http://www.emulab.net/downloads/openstack-setup-ext-capnet-v9.tar.gz"
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

#
# Create our in-memory model of the RSpec -- the resources we're going to request
# in our experiment, and their configuration.
#
rspec = RSpec.Request()

#
# This geni-lib script is designed to run in the CloudLab Portal.
#
pc = portal.Context()

#
# Define *many* parameters; see the help docs in geni-lib to learn how to modify.
#
31
# ,("kilo","Kilo"),("juno","Juno")],
32
pc.defineParameter("release","OpenStack Release",
33 34
                   portal.ParameterType.STRING,"liberty",[("liberty","Liberty")],
                   longDescription="We provide CapNet support only for OpenStack Liberty (Ubuntu 15.10).  OpenStack is installed from packages available on this distributions.")
35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91
pc.defineParameter("computeNodeCount", "Number of compute nodes (at Site 1)",
                   portal.ParameterType.INTEGER, 1)
pc.defineParameter("publicIPCount", "Number of public IP addresses",
                   portal.ParameterType.INTEGER, 4,
                   longDescription="Make sure to include both the number of floating IP addresses you plan to need for instances; and also for OpenVSwitch interface IP addresses.  Each OpenStack network this profile creates for you is bridged to the external, public network, so you also need a public IP address for each of those switch interfaces.  So, if you ask for one GRE tunnel network, and one flat data network (the default configuration), you would need two public IPs for switch interfaces, and then you request two additional public IPs that can be bound to instances as floating IPs.  If you ask for more networks, make sure to increase this number appropriately.")
pc.defineParameter("osNodeType", "Hardware type of all nodes",
                   portal.ParameterType.NODETYPE, "",
                   longDescription="A specific hardware type to use for each node.  Cloudlab clusters all have machines of specific types.  When you set this field to a value that is a specific hardware type, you will only be able to instantiate this profile on clusters with machines of that type.  If unset, when you instantiate the profile, the resulting experiment may have machines of any available type allocated.")
pc.defineParameter("osLinkSpeed", "Experiment Link Speed of all nodes",
                   portal.ParameterType.INTEGER, 0,
                   [(0,"Any"),(1000000,"1Gb/s"),(10000000,"10Gb/s")],
                   longDescription="A specific link speed to use for each node.  All experiment network interfaces will request this speed.")
pc.defineParameter("extTarballs", "Extra Setup Script Tarballs",
                   portal.ParameterType.STRING,CAPNET_TBURL,
                   longDescription="A comma-separated list of tarballs to fetch and unpack in /tmp/setup/ext; each tarball should have one dir containing an executable script named setup.sh, and any supporting files setup.sh requires.  These extension tarballs and scripts will execute on the controller node after the regular setup scripts have finished.")


pc.defineParameter("capnetDataLanCount","Number of Capnet Data Networks",
                   portal.ParameterType.INTEGER,1,
                   longDescription="Create a number of Capnet physical OpenStack networks.  If you do not select the Multiplex Flat Networks option below, each of these networks requires a physical network interface.  If you attempt to instantiate this profile on nodes with only 1 experiment interface, and ask for more than one flat network, your profile will not instantiate correctly.  Many CloudLab nodes have only a single experiment interface.")
pc.defineParameter("flatDataLanCount","Number of Flat Data Networks",
                   portal.ParameterType.INTEGER,1,
                   longDescription="Create a number of flat OpenStack networks.  If you do not select the Multiplex Flat Networks option below, each of these networks requires a physical network interface.  If you attempt to instantiate this profile on nodes with only 1 experiment interface, and ask for more than one flat network, your profile will not instantiate correctly.  Many CloudLab nodes have only a single experiment interface.")
pc.defineParameter("greDataLanCount","Number of GRE Tunnel Data Networks",
                   portal.ParameterType.INTEGER,1,
                   longDescription="To use GRE tunnels, you must have at least one flat data network; all tunnels are implemented using the first flat network!")
pc.defineParameter("vlanDataLanCount","Number of VLAN Data Networks",
                   portal.ParameterType.INTEGER,0,
                   longDescription="If you want to play with OpenStack networks that are implemented using real VLAN tags, create VLAN-backed networks with this parameter.  Currently, however, you cannot combine it with Flat nor Tunnel data networks.")
pc.defineParameter("multiplexFlatLans", "Multiplex Flat Networks",
                   portal.ParameterType.BOOLEAN, False,
                   longDescription="Multiplex any flat networks (i.e., management and all of the flat data networks) over physical interfaces, using VLANs.  These VLANs are invisible to OpenStack, unlike the NUmber of VLAN Data Networks option, where OpenStack assigns the real VLAN tags to create its networks.  On CloudLab, many physical machines have only a single experiment network interface, so if you want multiple flat networks, you have to multiplex.  Currently, if you select this option, you *must* specify 0 for VLAN Data Networks; we cannot support both simultaneously yet.")

pc.defineParameter("libcapRepo","Capnet: libcap Repo",
                   portal.ParameterType.STRING,
                   "https://gitlab.flux.utah.edu/xcap/libcap.git",
                   longDescription="The libcap source code repository")
pc.defineParameter("libcapBranch","Capnet: libcap branch",
                   portal.ParameterType.STRING,"master",
                   longDescription="The branch to checkout and build in the libcap source code repository")
pc.defineParameter("openmulRepo","Capnet: openmul Repo",
                   portal.ParameterType.STRING,
                   "https://gitlab.flux.utah.edu/tcloud/openmul.git",
                   longDescription="The openmul source code repository")
pc.defineParameter("openmulBranch","Capnet: openmul branch",
                   portal.ParameterType.STRING,"capnet",
                   longDescription="The branch to checkout and build in the openmul source code repository")
pc.defineParameter("capnetRepo","Capnet: capnet Repo",
                   portal.ParameterType.STRING,
                   "https://gitlab.flux.utah.edu/tcloud/capnet.git",
                   longDescription="The capnet source code repository")
pc.defineParameter("capnetBranch","Capnet: capnet branch",
                   portal.ParameterType.STRING,"master",
                   longDescription="The branch to checkout and build in the capnet source code repository")
pc.defineParameter("capnetPluginRepo",
                   "Capnet: networking-capnet OpenStack Plugin Repo",
                   portal.ParameterType.STRING,
92
                   "https://gitlab.flux.utah.edu/tcloud/networking-capnet.git",
93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364
                   longDescription="The networking-capnet Capnet OpenStack Neutron Plugin source code repository")
pc.defineParameter("capnetPluginBranch",
                   "Capnet: networking-capnet Capnet OpenStack Neutron Plugin branch",
                   portal.ParameterType.STRING,"master",
                   longDescription="The branch to checkout and build in the networking-capnet OpenStack plugin source code repository")


pc.defineParameter("doAptUpgrade","Upgrade OpenStack packages and dependencies to the latest versions",
                   portal.ParameterType.BOOLEAN, False,advanced=True,
                   longDescription="The default images this profile uses have OpenStack and dependent packages preloaded.  To guarantee that these scripts always work, we no longer upgrade to the latest packages by default, to avoid changes.  If you want to ensure you have the latest packages, you should enable this option -- but if there are setup failures, we can't guarantee support.  NOTE: selecting this option requires that you also select the option to update the Apt package cache!")
pc.defineParameter("doAptInstall","Install required OpenStack packages and dependencies",
                   portal.ParameterType.BOOLEAN, True,advanced=True,
                   longDescription="This option allows you to tell the setup scripts not to install or upgrade any packages (other than the absolute dependencies without which the scripts cannot run).  If you start from bare images, or select a profile option that may trigger a package to be installed, we may need to install packages for you; and if you have disabled it, we might not be able to configure these features.  This option is really only for people who want to configure only the openstack packages that are already installed on their disk images, and not be surprised by package or database schema upgrades.  NOTE: this option requires that you also select the option to update the Apt package cache!")
pc.defineParameter("doAptUpdate","Update the Apt package cache before installing any packages",
                   portal.ParameterType.BOOLEAN, True,advanced=True,
                   longDescription="This parameter is a bit dangerous.  We update the Apt package cache by default in case we need to install any packages (i.e., if your base image doesn't have OpenStack packages preinstalled, or is missing some package that the scripts must have).  If the cache is outdated, and Apt tries to download a package, that package version may no longer exist on the mirrors.  Only disable this option if you want to minimize the risk that currently-installed pacakges will be upgraded due to dependency pull-in.  Of course, by not updating the package cache, you may not be able to install any packages (and if these scripts need to install packages for you, they may fail!), so be careful with this option.")
pc.defineParameter("fromScratch","Install OpenStack packages on a bare image",
                   portal.ParameterType.BOOLEAN,False,advanced=True,
                   longDescription="If you do not mind waiting awhile for your experiment and OpenStack instance to be available, you can select this option to start from one of our standard Ubuntu disk images; the profile setup scripts will then install all necessary packages.  NOTE: this option may only be used at x86 cluster (i.e., not the \"Utah Cluster\") for now!  NOTE: this option requires that you select both the Apt update and install package options above!")
pc.defineParameter("vxlanDataLanCount","Number of VXLAN Data Networks",
                   portal.ParameterType.INTEGER,0,
                   longDescription="To use VXLAN networks, you must have at least one flat data network; all tunnels are implemented using the first flat network!",
                   advanced=True)

pc.defineParameter("managementLanType","Management Network Type",
                   portal.ParameterType.STRING,"vpn",[("vpn","VPN"),("flat","Flat")],
                   advanced=True,longDescription="This profile creates a classic OpenStack setup, where services communicate not over the public network, but over an isolated private management network.  By default, that management network is implemented as a VPN hosted on the public network; this allows us to not use up a physical experiment network interface just to host the management network, and leaves that unused interface available for OpenStack data networks.  However, if you are using multiplexed Flat networks, you can also make this a Flat network, and it will be multiplexed along with your other flat networks---isolated by VLAN tags.  These VLAN tags are internal to CloudLab, and are invisible to OpenStack.")

pc.defineParameter("computeNodeCountSite2", "Number of compute nodes at Site 2",
                   portal.ParameterType.INTEGER, 0,advanced=True,
                   longDescription="You can add additional compute nodes from other CloudLab clusters, allowing you to experiment with remote VMs controlled from the central controller at the first site.")

pc.defineParameter("blockstoreURN", "Remote Block Store URN",
                   portal.ParameterType.STRING, "",advanced=True,
                   longDescription="The URN of a remote block store that already exists that you want attached to the node you specified (defaults to the ctl node).  The block store must exist at the cluster at which you instantiate the profile!")
pc.defineParameter("blockstoreMountNode", "Remote Block Store Mount Node",
                   portal.ParameterType.STRING, "ctl",advanced=True,
                   longDescription="The node on which you want your remote block store mounted; defaults to the controller node.")
pc.defineParameter("blockstoreMountPoint", "Remote Block Store Mount Point",
                   portal.ParameterType.STRING, "/dataset",advanced=True,
                   longDescription="The mount point at which you want your remote block store mounted.  Be careful where you mount it -- something might already be there (i.e., /storage is already taken).  Note also that this option requires a network interface, because it creates a link between the dataset and the node where the dataset is available.  Thus, just as for creating extra LANs, you might need to select the Multiplex Flat Networks option, which will also multiplex the blockstore link here.")

pc.defineParameter("ipAllocationStrategy","IP Addressing",
                   portal.ParameterType.STRING,"script",[("cloudlab","CloudLab"),("script","This Script")],
                   longDescription="Either let CloudLab auto-generate IP addresses for the nodes in your OpenStack networks, or let this script generate them.  If you include nodes at multiple sites, you must choose this script!  The default is this script, because the subnets CloudLab generates for flat networks are sized according to the number of physical nodes in your topology.  However, when the profile sets up your flat OpenStack networks, it tries to enable your VMs and physical nodes to talk to each other---so they all must be on the same subnet.  Thus, you may not have many IPs left for VMs.  However, if the script IP address generation is buggy or otherwise insufficient, you can fall back to CloudLab and see if that improves things.",
                   advanced=True)

pc.defineParameter("tokenTimeout","Keystone Token Expiration in Seconds",
                   portal.ParameterType.INTEGER,14400,advanced=True,
                   longDescription="Keystone token expiration in seconds.")

pc.defineParameter("sessionTimeout","Horizon Session Timeout in Seconds",
                   portal.ParameterType.INTEGER,14400,advanced=True,
                   longDescription="Horizon session timeout in seconds.")

pc.defineParameter("keystoneVersion","Keystone API Version",
                   portal.ParameterType.INTEGER,
                   0, [ (0,"(default)"),(2,"v2.0"),(3,"v3") ],advanced=True,
                   longDescription="Keystone API Version.  Defaults to v2.0 on Juno and Kilo; defaults to v3 on Liberty and onwards.  You can try to force v2.0 on Liberty and onwards, but we cannot guarantee support for this configuration.")
pc.defineParameter("keystoneUseMemcache","Keystone Uses Memcache",
                   portal.ParameterType.BOOLEAN,False,advanced=True,
                   longDescription="Specify whether or not Keystone should use Memcache as its token backend.  In our testing, this has seemed to exacerbate intermittent Keystone internal errors, so it is off by default, and by default, the SQL token backend is used instead.")
pc.defineParameter("keystoneUseWSGI","Keystone Uses WSGI",
                   portal.ParameterType.INTEGER,
                   2, [ (2,"(default)"),(1,"Yes"),(0,"No") ],advanced=True,
                   longDescription="Specify whether or not Keystone should use Apache/WSGI instead of its own server.  This is the default from Kilo onwards.  In our testing, this has seemed to slow down Keystone.")
pc.defineParameter("quotasOff","Unlimit Default Quotas",
                   portal.ParameterType.BOOLEAN,True,advanced=True,
                   longDescription="Set the default Nova and Cinder quotas to unlimited, at least those that can be set via CLI utils (some cannot be set, but the significant ones can be set).")

pc.defineParameter("disableSecurityGroups","Disable Security Group Enforcement",
                   portal.ParameterType.BOOLEAN,False,advanced=True,
                   longDescription="Sometimes it can be easier to play with OpenStack if you do not have to mess around with security groups at all.  This option selects a null security group driver, if set.  This means security groups are enabled, but are not enforced (we set the firewall_driver neutron option to neutron.agent.firewall.NoopFirewallDriver to accomplish this).")

pc.defineParameter("enableInboundSshAndIcmp","Enable Inbound SSH and ICMP",
                   portal.ParameterType.BOOLEAN,True,advanced=True,
                   longDescription="Enable inbound SSH and ICMP into your instances in the default security group, if you have security groups enabled.")

pc.defineParameter("enableNewSerialSupport","Enable new Juno serial consoles",
                   portal.ParameterType.BOOLEAN,False,advanced=True,
                   longDescription="Enable new serial console support added in Juno.  This means you can access serial consoles via web sockets from a CLI tool (not in the dashboard yet), but the serial console log will no longer be available for viewing!  Until it supports both interactivity and logging, you will have to choose.  We download software for you and create a simple frontend script on your controller node, /root/setup/novaconsole.sh , that when given the name of an instance as its sole argument, will connect you to its serial console.  The escape sequence is ~. (tilde,period), but make sure to use multiple tildes to escape through your ssh connection(s), so that those are not disconnected along with your console session.")

pc.defineParameter("ceilometerUseMongoDB","Use MongoDB in Ceilometer",
                   portal.ParameterType.BOOLEAN,False,advanced=True,
                   longDescription="Use MongoDB for Ceilometer instead of MySQL (with Ubuntu 14 and Juno, we have observed crashy behavior with MongoDB, so the default is MySQL; YMMV.")

pc.defineParameter("enableVerboseLogging","Enable Verbose Logging",
                   portal.ParameterType.BOOLEAN,False,advanced=True,
                   longDescription="Enable verbose logging for OpenStack components.")
pc.defineParameter("enableDebugLogging","Enable Debug Logging",
                   portal.ParameterType.BOOLEAN,False,advanced=True,
                   longDescription="Enable debug logging for OpenStack components.")

pc.defineParameter("controllerHost", "Name of controller node",
                   portal.ParameterType.STRING, "ctl", advanced=True,
                   longDescription="The short name of the controller node.  You shold leave this alone unless you really want the hostname to change.")
pc.defineParameter("networkManagerHost", "Name of network manager node",
                   portal.ParameterType.STRING, "nm",advanced=True,
                   longDescription="The short name of the network manager (neutron) node.  You shold leave this alone unless you really want the hostname to change.")
pc.defineParameter("computeHostBaseName", "Base name of compute node(s)",
                   portal.ParameterType.STRING, "cp", advanced=True,
                   longDescription="The base string of the short name of the compute nodes (node names will look like cp-1, cp-2, ... or cp-s2-1, cp-s2-2, ... (for nodes at Site 2, if you request those)).  You shold leave this alone unless you really want the hostname to change.")
#pc.defineParameter("blockStorageHost", "Name of block storage server node",
#                   portal.ParameterType.STRING, "ctl")
#pc.defineParameter("objectStorageHost", "Name of object storage server node",
#                   portal.ParameterType.STRING, "ctl")
#pc.defineParameter("blockStorageNodeCount", "Number of block storage nodes",
#                   portal.ParameterType.INTEGER, 0)
#pc.defineParameter("objectStorageNodeCount", "Number of object storage nodes",
#                   portal.ParameterType.STRING, 0)
###pc.defineParameter("adminPass","The OpenStack admin password",
###                   portal.ParameterType.STRING,"",advanced=True,
###                   longDescription="You should choose a unique password at least 8 characters long, with uppercase and lowercase characters, numbers, and special characters.  CAREFULLY NOTE this password; but if you forget, you can find it later on the experiment status page.  If you don't provide a password, it will be randomly generated, and you can find it on your experiment status page after you instantiate the profile.")

#
# Get any input parameter values that will override our defaults.
#
params = pc.bindParameters()

#
# Verify our parameters and throw errors.
#
###
### XXX: get rid of custom root password support for now
###
###if len(params.adminPass) > 0:
###    pwel = []
###    up = low = num = none = total = 0
###    for ch in params.adminPass:
###        if ch.isupper(): up += 1
###        if ch.islower(): low += 1
###        if ch.isdigit(): num += 1
###        if not ch.isalpha(): none += 1
###        total += 1
###        pass
###    if total < 8:
###        pwel.append("Your password should be at least 8 characters in length!")
###    if up == 0 or low == 0 or num == 0 or none == 0:
###        pwel.append("Your password should contain a mix of lowercase, uppercase, digits, and non-alphanumeric characters!")
###    if params.adminPass == "N!ceD3m0":
###        pwel.append("This password cannot be used.")
###    for err in pwel:
###        pc.reportError(portal.ParameterError(err,['adminPass']))
###        pass
###    pass
###elif False:
####    pc.reportError(portal.ParameterError("You cannot set a null password!",
####                                         ['adminPass']))
###    # Generate a random password that conforms to the above requirements.
###    # We only generate passwds with easy nonalpha chars, but we accept any
###    # nonalpha char to satisfy the requirements...
###    nonalphaChars = [33,35,36,37,38,40,41,42,43,64,94]
###    upperChars = range(65,90)
###    lowerChars = range(97,122)
###    decChars = range(48,57)
###    random.shuffle(nonalphaChars)
###    random.shuffle(upperChars)
###    random.shuffle(lowerChars)
###    random.shuffle(decChars)
    
###    passwdList = [nonalphaChars[0],nonalphaChars[1],upperChars[0],upperChars[1],
###                  lowerChars[0],lowerChars[1],decChars[0],decChars[1]]
###    random.shuffle(passwdList)
###    params.adminPass = ''
###    for i in passwdList:
###        params.adminPass += chr(i)
###        pass
###    pass
###else:
###    #
###    # For now, let Cloudlab generate the random password for us; this will
###    # eventually change to the above code.
###    #
###    pass

EXT_TARBALLS = params.extTarballs.split(',')

if params.computeNodeCount > 8:
    perr = portal.ParameterWarning("Are you creating a real cloud?  Otherwise, do you really need more than 8 compute nodes?  Think of your fellow users scrambling to get nodes :).",['computeNodeCount'])
    pc.reportWarning(perr)
    pass
if params.computeNodeCountSite2 > 8:
    perr = portal.ParameterWarning("Are you creating a real cloud?  Otherwise, do you really need more than 8 compute nodes?  Think of your fellow users scrambling to get nodes :).",['computeNodeCountSite2'])
    pc.reportWarning(perr)
    pass
if params.computeNodeCountSite2 > 0 and not params.multiplexFlatLans:
    perr = portal.ParameterError("If you request nodes at Site 2, you must enable multiplexing for flat lans!",['computeNodeCountSite2','multiplexFlatLans'])
    pc.reportError(perr)
    pass

if params.fromScratch and not params.doAptInstall:
    perr = portal.ParameterError("You cannot start from a bare image and choose not to install any OpenStack packages!",['fromScratch','doAptInstall'])
    pc.reportError(perr)
    pass
if params.doAptUpgrade and not params.doAptInstall:
    perr = portal.ParameterWarning("If you disable package installation, and request package upgrades, nothing will happen; you'll have to comb through the setup script logfiles to see what packages would have been upgraded.",['doAptUpgrade','doAptInstall'])
    pc.reportWarning(perr)
    pass

if params.publicIPCount > 16:
    perr = portal.ParameterError("You cannot request more than 16 public IP addresses, at least not without creating your own modified version of this profile!",['publicIPCount'])
    pc.reportError(perr)
    pass
if (params.vlanDataLanCount + params.vxlanDataLanCount \
    + params.greDataLanCount + params.flatDataLanCount \
    + params.capnetDataLanCount) \
    > (params.publicIPCount - 1):
    perr = portal.ParameterWarning("You did not request enough public IPs to cover all your data networks and still leave you at least one floating IP; you may want to read this parameter's help documentation and change your parameters!",['publicIPCount'])
    pc.reportWarning(perr)
    pass

if params.vlanDataLanCount > 0 and params.flatDataLanCount > 0:
    perr = portal.ParameterError("You cannot specify vlanDataLanCount > 0 and flatDataLanCount > 0",['vlanDataLanCount','flatDataLanCount'])
    pc.reportError(perr)
    pass
if params.vlanDataLanCount > 0 and params.greDataLanCount > 0:
    perr = portal.ParameterError("You cannot specify vlanDataLanCount > 0 and greDataLanCount > 0",['vlanDataLanCount','greDataLanCount'])
    pc.reportError(perr)
    pass
if params.vlanDataLanCount > 0 and params.capnetDataLanCount > 0:
    perr = portal.ParameterError("You cannot specify vlanDataLanCount > 0 and capnetDataLanCount > 0",['vlanDataLanCount','capnetDataLanCount'])
    pc.reportError(perr)
    pass

if params.greDataLanCount > 0 and params.flatDataLanCount < 1:
    perr = portal.ParameterError("You must specifiy at least one flat data network to request one or more GRE data networks!",['greDataLanCount','flatDataLanCount'])
    pc.reportError(perr)
    pass
if params.vxlanDataLanCount > 0 and params.flatDataLanCount < 1:
    perr = portal.ParameterError("You must specifiy at least one flat data network to request one or more VXLAN data networks!",['vxlanDataLanCount','flatDataLanCount'])
    pc.reportError(perr)
    pass

if params.computeNodeCountSite2 > 0 and params.ipAllocationStrategy != "script":
    # or params.computeNodeCountSite3 > 0)
    badpl = ['ipAllocationStrategy']
    if params.computeNodeCountSite2 > 0:
        badpl.append('computeNodeCountSite2')
#    if params.computeNodeCountSite3 > 0:
#        badpl.append('computeNodeCountSite3')
    perr = portal.ParameterError("You must choose an ipAllocationStrategy of 'script' when including compute nodes at multiple sites!",
                                   badpl)
    pc.reportError(perr)
    params.ipAllocationStrategy = "script"
    pass

if params.ipAllocationStrategy == 'script':
    generateIPs = True
else:
    generateIPs = False
    pass

#
# Give the library a chance to return nice JSON-formatted exception(s) and/or
# warnings; this might sys.exit().
#
pc.verifyParameters()

detailedParamAutoDocs = ''
for param in pc._parameterOrder:
    if not pc._parameters.has_key(param):
        continue
    detailedParamAutoDocs += \
      """
  - *%s*

    %s
    (default value: *%s*)
      """ % (pc._parameters[param]['description'],pc._parameters[param]['longDescription'],pc._parameters[param]['defaultValue'])
    pass

tourDescription = \
365
  "This profile provides a highly-configurable, CapNet-enabled OpenStack instance with a controller, network manager, and one or more compute nodes (potentially at multiple Cloudlab sites). This profile runs x86 or ARM64 nodes. It sets up OpenStack Liberty on Ubuntu 15.10, and configures all OpenStack services, pulls in some VM disk images, and creates basic networks accessible via floating IPs.  You'll be able to create instances and access them over the Internet in just a few minutes. When you click the Instantiate button, you'll be presented with a list of parameters that you can change to control what your OpenStack instance will look like; **carefully** read the parameter documentation on that page (or in the Instructions) to understand the various features available to you."
366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440

###if not params.adminPass or len(params.adminPass) == 0:
passwdHelp = "Your OpenStack admin and instance VM password is randomly-generated by Cloudlab, and it is: `{password-adminPass}` ."
###else:
###    passwdHelp = "Your OpenStack dashboard and instance VM password is `the one you specified in parameter selection`; hopefully you memorized or memoized it!"
###    pass
passwdHelp += "  When logging in to the Dashboard, use the `admin` user; when logging into instance VMs, use the `ubuntu` user."

tourInstructions = \
  """
### Basic Instructions
Once your experiment nodes have booted, and this profile's configuration scripts have finished configuring OpenStack inside your experiment, you'll be able to visit [the OpenStack Dashboard WWW interface](http://{host-%s}/horizon/auth/login/?next=/horizon/project/instances/) (approx. 5-15 minutes).  %s

Please wait to login to the OpenStack dashboard until the setup scripts have completed (we've seen Dashboard issues with content not appearing if you login before configuration is complete).  There are multiple ways to determine if the scripts have finished:
  - First, you can watch the experiment status page: the overall State will say \"booted (startup services are still running)\" to indicate that the nodes have booted up, but the setup scripts are still running.
  - Second, the Topology View will show you, for each node, the status of the startup command on each node (the startup command kicks off the setup scripts on each node).  Once the startup command has finished on each node, the overall State field will change to \"ready\".  If any of the startup scripts fail, you can mouse over the failed node in the topology viewer for the status code.
  - Finally, the profile configuration scripts also send you two emails: once to notify you that controller setup has started, and a second to notify you that setup has completed.  Once you receive the second email, you can login to the Openstack Dashboard and begin your work.

**NOTE:** If the web interface rejects your password or gives another error, the scripts might simply need more time to set up the backend. Wait a few minutes and try again.  If you don't receive any email notifications, you can SSH to the 'ctl' node, become root, and check the primary setup script's logfile (/root/setup/setup-controller.log).  If near the bottom there's a line that includes 'Your OpenStack instance has completed setup'), the scripts have finished, and it's safe to login to the Dashboard.

If you need to run the OpenStack CLI tools, or your own scripts that use the OpenStack APIs, you'll find authentication credentials in /root/setup/admin-openrc.sh .  Be aware that the username in this file is `adminapi`, not `admin`; this is an artifact of the days when the profile used to allow you to customize the admin password (it was necessary because the nodes did not have the plaintext password, but only the hash).

*Do not* add any VMs on the `ext-net` network; instead, give them floating IP addresses from the pool this profile requests on your behalf (and increase the size of that pool when you instantiate by changing the `Number of public IP addresses` parameter).  If you try to use any public IP addresses on the `ext-net` network that are not part of your experiment (i.e., any that are not either the control network public IPs for the physical machines, or the public IPs used as floating IPs), those packets will be blocked, and you will be confused.

The profile's setup scripts are automatically installed on each node in `/tmp/setup` .  They execute as `root`, and keep state and downloaded files in `/root/setup/`.  More importantly, they write copious logfiles in that directory; so if you think there's a problem with the configuration, you could take a quick look through these logs --- especially `setup-controller.log` on the `ctl` node.


### Detailed Parameter Documentation
%s
""" % (params.controllerHost,passwdHelp,detailedParamAutoDocs)

#
# Setup the Tour info with the above description and instructions.
#  
tour = IG.Tour()
tour.Description(IG.Tour.TEXT,tourDescription)
tour.Instructions(IG.Tour.MARKDOWN,tourInstructions)
rspec.addTour(tour)

#
# Ok, get down to business -- we are going to create CloudLab LANs to be used as
# (openstack networks), based on user's parameters.  We might also generate IP
# addresses for the nodes, so set up some quick, brutally stupid IP address
# generation for each LAN.
#
capnetlanstrs = {}
flatlanstrs = {}
vlanstrs = {}
ipdb = {}
if params.managementLanType == 'flat':
    ipdb['mgmt-lan'] = { 'base':'192.168','netmask':'255.255.0.0','values':[-1,-1,0,0] }
    pass
dataOffset = 10
ipSubnetsUsed = 0
for i in range(1,params.flatDataLanCount + 1):
    dlanstr = "%s-%d" % ('flat-lan',i)
    ipdb[dlanstr] = { 'base' : '10.%d' % (i + dataOffset + ipSubnetsUsed,),'netmask' : '255.255.0.0',
                      'values' : [-1,-1,10,0] }
    flatlanstrs[i] = dlanstr
    ipSubnetsUsed += 1
    pass
for i in range(1,params.vlanDataLanCount + 1):
    dlanstr = "%s-%d" % ('vlan-lan',i)
    ipdb[dlanstr] = { 'base' : '10.%d' % (i + dataOffset + ipSubnetsUsed,),'netmask' : '255.255.0.0',
                      'values' : [-1,-1,10,0] }
    vlanstrs[i] = dlanstr
    ipSubnetsUsed += 1
    pass
for i in range(1,params.vxlanDataLanCount + 1):
    dlanstr = "%s-%d" % ('vxlan-lan',i)
    ipdb[dlanstr] = { 'base' : '10.%d' % (i + dataOffset + ipSubnetsUsed,),'netmask' : '255.255.0.0',
                      'values' : [-1,-1,10,0] }
    ipSubnetsUsed += 1
    pass
for i in range(1,params.capnetDataLanCount + 1):
441
    dlanstr = "%s-%d" % ('capnetlan',i)
442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895
    ipdb[dlanstr] = { 'base' : '10.%d' % (i + dataOffset + ipSubnetsUsed,),'netmask' : '255.255.0.0',
                      'values' : [-1,-1,10,0] }
    capnetlanstrs[i] = dlanstr
    ipSubnetsUsed += 1
    pass

# Assume a /16 for every network
def get_next_ipaddr(lan):
    ipaddr = ipdb[lan]['base']
    backpart = ''

    idxlist = range(1,4)
    idxlist.reverse()
    didinc = False
    for i in idxlist:
        if ipdb[lan]['values'][i] is -1:
            break
        if not didinc:
            didinc = True
            ipdb[lan]['values'][i] += 1
            if ipdb[lan]['values'][i] > 254:
                if ipdb[lan]['values'][i-1] is -1:
                    return ''
                else:
                    ipdb[lan]['values'][i-1] += 1
                    pass
                pass
            pass
        backpart = '.' + str(ipdb[lan]['values'][i]) + backpart
        pass

    return ipaddr + backpart

def get_netmask(lan):
    return ipdb[lan]['netmask']

#
# Ok, actually build the data LANs now...
#
capnetlans = {}
flatlans = {}
vlans = {}
alllans = []

for i in range(1,params.flatDataLanCount + 1):
    datalan = RSpec.LAN(flatlanstrs[i])
    if params.osLinkSpeed > 0:
        datalan.bandwidth = int(params.osLinkSpeed)
        pass
    if params.multiplexFlatLans:
        datalan.link_multiplexing = True
        datalan.best_effort = True
        # Need this cause LAN() sets the link type to lan, not sure why.
        datalan.type = "vlan"
        pass
    flatlans[i] = datalan
    alllans.append(datalan)
    pass
for i in range(1,params.vlanDataLanCount + 1):
    datalan = RSpec.LAN("vlan-lan-%d" % (i,))
    if params.osLinkSpeed > 0:
        datalan.bandwidth = int(params.osLinkSpeed)
        pass
    datalan.link_multiplexing = True
    datalan.best_effort = True
    # Need this cause LAN() sets the link type to lan, not sure why.
    datalan.type = "vlan"
    vlans[i] = datalan
    alllans.append(datalan)
    pass
for i in range(1,params.capnetDataLanCount + 1):
    datalan = RSpec.LAN(capnetlanstrs[i])
    if params.osLinkSpeed > 0:
        datalan.bandwidth = int(params.osLinkSpeed)
        pass
    if params.multiplexFlatLans:
        datalan.link_multiplexing = True
        datalan.best_effort = True
        # Need this cause LAN() sets the link type to lan, not sure why.
        datalan.type = "vlan"
        pass
    capnetlans[i] = datalan
    alllans.append(datalan)
    pass

#
# Ok, also build a management LAN if requested.  If we build one, it runs over
# a dedicated experiment interface, not the Cloudlab public control network.
#
if params.managementLanType == 'flat':
    mgmtlan = RSpec.LAN('mgmt-lan')
    if params.multiplexFlatLans:
        mgmtlan.link_multiplexing = True
        mgmtlan.best_effort = True
        # Need this cause LAN() sets the link type to lan, not sure why.
        mgmtlan.type = "vlan"
        pass
    pass
else:
    mgmtlan = None
    pass

#
# Construct the disk image URNs we're going to set the various nodes to load.
#
if params.release == "juno":
    image_os = 'UBUNTU14-10-64'
elif params.release == "kilo":
    image_os = 'UBUNTU15-04-64'
else:
    image_os = 'UBUNTU15-10-64'
    pass
if params.fromScratch:
    image_tag_cn = 'STD'
    image_tag_nm = 'STD'
    image_tag_cp = 'STD'
else:
    image_tag_cn = 'OSCN'
    image_tag_nm = 'OSNM'
    image_tag_cp = 'OSCP'
    pass

nodes = dict({})

#
# Add the controller node.
#
controller = RSpec.RawPC(params.controllerHost)
nodes[params.controllerHost] = controller
if params.osNodeType:
    controller.hardware_type = params.osNodeType
    pass
controller.Site("1")
controller.disk_image = "urn:publicid:IDN+utah.cloudlab.us+image+emulab-ops//%s-%s" % (image_os,image_tag_cn)
i = 0
for datalan in alllans:
    iface = controller.addInterface("if%d" % (i,))
    datalan.addInterface(iface)
    if generateIPs:
        iface.addAddress(RSpec.IPv4Address(get_next_ipaddr(datalan.client_id),
                                           get_netmask(datalan.client_id)))
        pass
    i += 1
    pass
if mgmtlan:
    iface = controller.addInterface("ifM")
    mgmtlan.addInterface(iface)
    if generateIPs:
        iface.addAddress(RSpec.IPv4Address(get_next_ipaddr(mgmtlan.client_id),
                                           get_netmask(mgmtlan.client_id)))
        pass
    pass
controller.addService(RSpec.Install(url=TBURL, path="/tmp"))
controller.addService(RSpec.Execute(shell="sh",command=TBCMD))
for et in EXT_TARBALLS:
    controller.addService(RSpec.Install(url=et, path="/tmp/setup/ext"))
    pass

#
# Add the network manager (neutron) node.
#
networkManager = RSpec.RawPC(params.networkManagerHost)
nodes[params.networkManagerHost] = networkManager
if params.osNodeType:
    networkManager.hardware_type = params.osNodeType
    pass
networkManager.Site("1")
networkManager.disk_image = "urn:publicid:IDN+utah.cloudlab.us+image+emulab-ops//%s-%s" % (image_os,image_tag_nm)
i = 0
for datalan in alllans:
    iface = networkManager.addInterface("if%d" % (i,))
    datalan.addInterface(iface)
    if generateIPs:
        iface.addAddress(RSpec.IPv4Address(get_next_ipaddr(datalan.client_id),
                                           get_netmask(datalan.client_id)))
        pass
    i += 1
    pass
if mgmtlan:
    iface = networkManager.addInterface("ifM")
    mgmtlan.addInterface(iface)
    if generateIPs:
        iface.addAddress(RSpec.IPv4Address(get_next_ipaddr(mgmtlan.client_id),
                                           get_netmask(mgmtlan.client_id)))
        pass
    pass
networkManager.addService(RSpec.Install(url=TBURL, path="/tmp"))
networkManager.addService(RSpec.Execute(shell="sh",command=TBCMD))
for et in EXT_TARBALLS:
    networkManager.addService(RSpec.Install(url=et, path="/tmp/setup/ext"))
    pass


#
# Add the compute nodes.  First we generate names for each node at each site;
# then we create those nodes at each site.
#
computeNodeNamesBySite = {}
computeNodeList = ""
for i in range(1,params.computeNodeCount + 1):
    cpname = "%s-%d" % (params.computeHostBaseName,i)
    if not computeNodeNamesBySite.has_key(1):
        computeNodeNamesBySite[1] = []
        pass
    computeNodeNamesBySite[1].append(cpname)
    pass
for i in range(1,params.computeNodeCountSite2 + 1):
    cpname = "%s-s2-%d" % (params.computeHostBaseName,i)
    if not computeNodeNamesBySite.has_key(2):
        computeNodeNamesBySite[2] = []
        pass
    computeNodeNamesBySite[2].append(cpname)
    pass

for (siteNumber,cpnameList) in computeNodeNamesBySite.iteritems():
    for cpname in cpnameList:
        cpnode = RSpec.RawPC(cpname)
        nodes[cpname] = cpnode
        if params.osNodeType:
            cpnode.hardware_type = params.osNodeType
        pass
        cpnode.Site(str(siteNumber))
        cpnode.disk_image = "urn:publicid:IDN+utah.cloudlab.us+image+emulab-ops//%s-%s" % (image_os,image_tag_cp)
        i = 0
        for datalan in alllans:
            iface = cpnode.addInterface("if%d" % (i,))
            datalan.addInterface(iface)
            if generateIPs:
                iface.addAddress(RSpec.IPv4Address(get_next_ipaddr(datalan.client_id),
                                                   get_netmask(datalan.client_id)))
                pass
            i += 1
            pass
        if mgmtlan:
            iface = cpnode.addInterface("ifM")
            mgmtlan.addInterface(iface)
            if generateIPs:
                iface.addAddress(RSpec.IPv4Address(get_next_ipaddr(mgmtlan.client_id),
                                                   get_netmask(mgmtlan.client_id)))
                pass
            pass
        cpnode.addService(RSpec.Install(url=TBURL, path="/tmp"))
        cpnode.addService(RSpec.Execute(shell="sh",command=TBCMD))
        for et in EXT_TARBALLS:
            cpnode.addService(RSpec.Install(url=et, path="/tmp/setup/ext"))
            pass

        computeNodeList += cpname + ' '
        pass
    pass

#
# Add the blockstore, if requested.
#
bsnode = None
bslink = None
if params.blockstoreURN != "":
    if not nodes.has_key(params.blockstoreMountNode):
        #
        # This is a very late time to generate a warning, but that's ok!
        #
        perr = portal.ParameterError("The node on which you mount your block store must exist, and does not!",
                                     ['blockstoreMountNode'])
        pc.reportError(perr)
        pc.verifyParameters()
        pass
    
    rbsn = nodes[params.blockstoreMountNode]
    myintf = rbsn.addInterface("ifbs0")
    
    bsnode = IG.RemoteBlockstore("bsnode",params.blockstoreMountPoint)
    bsnode.Site("1")
    bsintf = bsnode.interface
    bsnode.dataset = params.blockstoreURN
    #bsnode.size = params.N
    
    bslink = RSpec.Link("bslink")
    bslink.addInterface(myintf)
    bslink.addInterface(bsintf)
    # Special blockstore attributes for this link.
    bslink.best_effort = True
    bslink.vlan_tagging = True
    pass

for nname in nodes.keys():
    rspec.addResource(nodes[nname])
if bsnode:
    rspec.addResource(bsnode)
for datalan in alllans:
    rspec.addResource(datalan)
if mgmtlan:
    rspec.addResource(mgmtlan)
if bslink:
    rspec.addResource(bslink)
    pass

#
# Grab a few public IP addresses.
#
apool = IG.AddressPool("nm",params.publicIPCount)
rspec.addResource(apool)

class EmulabEncrypt(RSpec.Resource):
    def _write(self, root):
        ns = "{http://www.protogeni.net/resources/rspec/ext/emulab/1}"

#        el = ET.SubElement(root,"%sencrypt" % (ns,),attrib={'name':'adminPass'})
#        el.text = params.adminPass
        el = ET.SubElement(root,"%spassword" % (ns,),attrib={'name':'adminPass'})
        pass
    pass

#
# Add our parameters to the request so we can get their values to our nodes.
# The nodes download the manifest(s), and the setup scripts read the parameter
# values when they run.
#
class Parameters(RSpec.Resource):
    def _write(self, root):
        ns = "{http://www.protogeni.net/resources/rspec/ext/johnsond/1}"
        paramXML = "%sparameter" % (ns,)
        
        el = ET.SubElement(root,"%sprofile_parameters" % (ns,))

        param = ET.SubElement(el,paramXML)
        param.text = 'CONTROLLER="%s"' % (params.controllerHost,)
        param = ET.SubElement(el,paramXML)
        param.text = 'NETWORKMANAGER="%s"' % (params.networkManagerHost,)
        param = ET.SubElement(el,paramXML)
        param.text = 'COMPUTENODES="%s"' % (computeNodeList,)
#        param = ET.SubElement(el,paramXML)
#        param.text = 'STORAGEHOST="%s"' % (params.blockStorageHost,)
#        param = ET.SubElement(el,paramXML)
#        param.text = 'OBJECTHOST="%s"' % (params.objectStorageHost,)
        param = ET.SubElement(el,paramXML)
        param.text = 'DATALANS="%s"' % (' '.join(map(lambda(lan): lan.client_id,alllans)))
        param = ET.SubElement(el,paramXML)
        param.text = 'DATAFLATLANS="%s"' % (' '.join(map(lambda(i): flatlans[i].client_id,range(1,params.flatDataLanCount + 1))))
        param = ET.SubElement(el,paramXML)
        param.text = 'DATAVLANS="%s"' % (' '.join(map(lambda(i): vlans[i].client_id,range(1,params.vlanDataLanCount + 1))))
        param = ET.SubElement(el,paramXML)
        param.text = 'DATAVXLANS="%d"' % (params.vxlanDataLanCount,)
        param = ET.SubElement(el,paramXML)
        param.text = 'DATATUNNELS=%d' % (params.greDataLanCount,)
        param = ET.SubElement(el,paramXML)
        param.text = 'DATAOTHERLANS="%s"' % (' '.join(map(lambda(i): capnetlans[i].client_id,range(1,params.capnetDataLanCount + 1))))
        param = ET.SubElement(el,paramXML)
        param.text = 'DATACAPNETLANS="%s"' % (' '.join(map(lambda(i): capnetlans[i].client_id,range(1,params.capnetDataLanCount + 1))))
        param = ET.SubElement(el,paramXML)
        if mgmtlan:
            param.text = 'MGMTLAN="%s"' % (mgmtlan.client_id,)
        else:
            param.text = 'MGMTLAN=""'
            pass
#        param = ET.SubElement(el,paramXML)
#        param.text = 'STORAGEHOST="%s"' % (params.blockStorageHost,)
        param = ET.SubElement(el,paramXML)
        param.text = 'DO_APT_INSTALL=%d' % (int(params.doAptInstall),)
        param = ET.SubElement(el,paramXML)
        param.text = 'DO_APT_UPGRADE=%d' % (int(params.doAptUpgrade),)
        param = ET.SubElement(el,paramXML)
        param.text = 'DO_APT_UPDATE=%d' % (int(params.doAptUpdate),)
        
        param = ET.SubElement(el,paramXML)
        param.text = 'LIBCAP_REPO="%s"' % (params.libcapRepo,)
        param = ET.SubElement(el,paramXML)
        param.text = 'LIBCAP_BRANCH="%s"' % (params.libcapBranch,)
        param = ET.SubElement(el,paramXML)
        param.text = 'OPENMUL_REPO="%s"' % (params.openmulRepo,)
        param = ET.SubElement(el,paramXML)
        param.text = 'OPENMUL_BRANCH="%s"' % (params.openmulBranch,)
        param = ET.SubElement(el,paramXML)
        param.text = 'CAPNET_REPO="%s"' % (params.capnetRepo,)
        param = ET.SubElement(el,paramXML)
        param.text = 'CAPNET_BRANCH="%s"' % (params.capnetBranch,)
        param = ET.SubElement(el,paramXML)
        param.text = 'CAPNET_PLUGIN_REPO="%s"' % (params.capnetPluginRepo,)
        param = ET.SubElement(el,paramXML)
        param.text = 'CAPNET_PLUGIN_BRANCH="%s"' % (params.capnetPluginBranch,)

###        if params.adminPass and len(params.adminPass) > 0:
###            random.seed()
###            salt = ""
###            schars = [46,47]
###            schars.extend(range(48,58))
###            schars.extend(range(97,123))
###            schars.extend(range(65,91))
###            for i in random.sample(schars,16):
###                salt += chr(i)
###                pass
###            hpass = crypt.crypt(params.adminPass,'$6$%s' % (salt,))
###            param = ET.SubElement(el,paramXML)
###            param.text = "ADMIN_PASS_HASH='%s'" % (hpass,)
###            pass
###        else:
        param = ET.SubElement(el,paramXML)
        param.text = "ADMIN_PASS_HASH=''"
###            pass
        
        param = ET.SubElement(el,paramXML)
        param.text = "ENABLE_NEW_SERIAL_SUPPORT=%d" % (int(params.enableNewSerialSupport))
        
        param = ET.SubElement(el,paramXML)
        param.text = "DISABLE_SECURITY_GROUPS=%d" % (int(params.disableSecurityGroups))
        
        param = ET.SubElement(el,paramXML)
        param.text = "DEFAULT_SECGROUP_ENABLE_SSH_ICMP=%d" % (int(params.enableInboundSshAndIcmp))
        
        param = ET.SubElement(el,paramXML)
        param.text = "CEILOMETER_USE_MONGODB=%d" % (int(params.ceilometerUseMongoDB))
        
        param = ET.SubElement(el,paramXML)
        param.text = "VERBOSE_LOGGING=\"%s\"" % (str(bool(params.enableVerboseLogging)))
        param = ET.SubElement(el,paramXML)
        param.text = "DEBUG_LOGGING=\"%s\"" % (str(bool(params.enableDebugLogging)))
        
        param = ET.SubElement(el,paramXML)
        param.text = "TOKENTIMEOUT=%d" % (int(params.tokenTimeout))
        param = ET.SubElement(el,paramXML)
        param.text = "SESSIONTIMEOUT=%d" % (int(params.sessionTimeout))
        
        if params.keystoneVersion > 0:
            param = ET.SubElement(el,paramXML)
            param.text = "KEYSTONEAPIVERSION=%d" % (int(params.keystoneVersion))
            pass
        
        param = ET.SubElement(el,paramXML)
        param.text = "KEYSTONEUSEMEMCACHE=%d" % (int(bool(params.keystoneUseMemcache)))
        
        if params.keystoneUseWSGI == 0:
            param = ET.SubElement(el,paramXML)
            param.text = "KEYSTONEUSEWSGI=0"
        elif params.keystoneUseWSGI == 1:
            param = ET.SubElement(el,paramXML)
            param.text = "KEYSTONEUSEWSGI=1"
        else:
            pass
        
        param = ET.SubElement(el,paramXML)
        param.text = "QUOTASOFF=%d" % (int(bool(params.quotasOff)))

        return el
    pass

parameters = Parameters()
rspec.addResource(parameters)

###if not params.adminPass or len(params.adminPass) == 0:
if True:
    stuffToEncrypt = EmulabEncrypt()
    rspec.addResource(stuffToEncrypt)
    pass

pc.printRequestRSpec(rspec)