#
# Stub file for setting up elab in elab.
#
# Use the --with-TBDEFS=filename to specify your own file.
# If you add a variable, be sure to go and update configure.in.
#
TBDBNAME=tbdb
TBADMINGROUP=tbadmin
TBOPSEMAIL=testbed-ops@ops.utah.cloudlab.us
TBLOGSEMAIL=testbed-logs@ops.utah.cloudlab.us
TBWWWEMAIL=testbed-www@ops.utah.cloudlab.us
TBAPPROVALEMAIL=testbed-approval@ops.utah.cloudlab.us
TBAUDITEMAIL=testbed-audit@ops.utah.cloudlab.us
TBSTATEDEMAIL=testbed-stated@ops.utah.cloudlab.us
TBTESTSUITEEMAIL=testbed-testsuite@ops.utah.cloudlab.us
TBAUTOMAILEMAIL=testbed-automail@ops.utah.cloudlab.us
TBACTIVEARCHIVE=testbed-active-users-archive@ops.utah.cloudlab.us
TBUSERSARCHIVE=testbed-users-archive@ops.utah.cloudlab.us
TBERRORSEMAIL=testbed-errors@ops.utah.cloudlab.us
TBCOOKIESUFFIX="CLOUDLAB"
JAILIPBASE=172.17.0.0
JAILIPMASK=255.240.0.0
DELAYCAPACITY=1
BOSSNODE=boss.utah.cloudlab.us
USERNODE=ops.utah.cloudlab.us
FSNODE=ops.utah.cloudlab.us
OURDOMAIN=utah.cloudlab.us
FSDIR_GROUPS=/groups
FSDIR_PROJ=/proj
FSDIR_USERS=/users
FSDIR_SHARE=/share
FSDIR_SCRATCH=
FS_WITH_QUOTAS=""
WWWHOST=www.utah.cloudlab.us
TBMAINSITE=0
THISHOMEBASE=CLOUDLAB
PLABSUPPORT=0
PELABSUPPORT=0
WIKISUPPORT=0
BUGDBSUPPORT=0
MAILMANSUPPORT=1
OPSDBSUPPORT=0
WINSUPPORT=0
NSVERIFY=0
NOSHAREDFS=0
NFSRACY=0
SFSSUPPORT=0
CVSSUPPORT=0
NFSTRACESUPPORT=0
ARCHIVESUPPORT=0
NTPSERVER=ops
#EXTERNAL_NTPSERVER1=ntp1.emulab.net
#EXTERNAL_NTPSERVER2=ntp1.emulab.net
#EXTERNAL_NTPSERVER3=ntp1.emulab.net
#EXTERNAL_NTPSERVER4=ntp1.emulab.net
DISABLE_NSE=1
# This means it is an inner elab!
#ELABINELAB=1
# If we can run old images ... depends on whther elvind is installed.
ELVIN_COMPAT=0
# XXX hack to work around perl bug
# Start a multicast IGMP querier
NEEDMCQUERIER=0
TBUSEDBI=1
#
# SSL Certificate stuff. Used to customize config files in ssl directory.
# Note that OrganizationalUnit is set in the cnf file.
# CommonName is typically set to BOSSNODE and emailAddress to TBOPSEMAIL
#
SSLCERT_COUNTRY="US"
SSLCERT_STATE="Utah"
SSLCERT_LOCALITY="Cloudlab"
SSLCERT_ORGNAME="Cloudlab Cluster"
#
# Network config stuff. Used to generate initial named and dhcpd config files.
#
TESTBED_NETWORK=128.110.156.0
TESTBED_NETMASK=255.255.255.0
BOSSNODE_IP=128.110.156.4
USERNODE_IP=128.110.156.34
FSNODE_IP=128.110.156.34
CONTROL_ROUTER_IP=128.110.152.1
CONTROL_NETWORK=128.110.152.0
CONTROL_NETMASK=255.255.252.0
PRIVATE_NETWORK=128.110.156.0
PRIVATE_ROUTER=128.110.156.1
PRIVATE_NETMASK=255.255.255.224
PUBLIC_NETWORK=128.110.156.32
PUBLIC_ROUTER=128.110.156.33
PUBLIC_NETMASK=255.255.255.224
DHCPD_DYNRANGE="128.110.152.230 128.110.152.250"
NAMED_FORWARDERS="155.98.32.70"
NAMED_ALSONOTIFY="155.98.32.70"
#
# Must localize to avoid conflict with outer emulab frisbeed.
#
FRISEBEEMCASTADDR="235.4.156"
FRISEBEEMCASTPORT="6000"
FRISEBEENUMPORTS="0"
#
# Ops can be a VM on boss.
#
OPSVM_ENABLE=0

# So we do not conflict with real users.
MIN_UNIX_UID=2000
MIN_UNIX_GID=2000

# Which console to use in pxeboot and the MFSes.
NODECONSOLE="vga"

# Which version of the MFS.
MFSVERSION="82"
PROTOGENI_SUPPORT=1
PROTOGENI_GENIRACK=0
PROTOGENI_DOMAIN="cloudlab"
FANCYBANNER=1
ISOLATEADMINS=0
EC2META_ENABLE=1
PROTOGENI_LOCALUSER=1
PROTOGENI_GENIWEBLOGIN=0
PROTOGENI_MAXSERVERLOAD=24
PROTOGENI_NONFSMOUNTS=0

#
# Fancy new browser in the console support
#
BROWSER_CONSOLE_ENABLE=1
NOVIRTNFSMOUNTS=1

# Image versioning and deltas.
IMAGEPROVENANCE=1
IMAGEDELTAS=1

# ZFS.
WITHZFS=1
ZFS_ROOT=z
ZFS_QUOTA_USER="1G"
ZFS_QUOTA_PROJECT="100G"
ZFS_QUOTA_GROUP="10G"
WITHAMD=1
AMD_ROOT=/.amd_mnt/ops

# Blockstores
BS_IQN_PREFIX=iqn.2014-11.us.cloudlab.utah

#
# If enabled, needs setup, see:
#   http://users.emulab.net/trac/emulab/wiki/NodeUsageInstall
#
NODE_USAGE_SUPPORT=1