Skip to content

GitLab

Commit 337dd532 authored by Russ Fish's avatar Russ Fish
Browse files

Enable networking and other rc scripts on CygWin.

parent 1ec51476
Hide whitespace changes
Inline Side-by-side
tmcd/common/config/rc.config
View file @ 337dd532
......@@ -84,13 +84,13 @@ if (MFS()) {
"rc.rpms", "rc.startcmd");
}
elsif (WINDOWS()) {
@bootscripts = ("rc.misc", #"rc.localize",
@bootscripts = ("rc.misc", ##"rc.localize",
"rc.keys", "rc.mounts",
"rc.accounts" ##, "rc.topomap",
##"rc.route", "rc.ifconfig",
##"rc.hostnames", ##"rc.syncserver", "rc.progagent",
##"rc.tarfiles", "rc.rpms",
##"rc.startcmd"
"rc.route", "rc.ifconfig",
"rc.hostnames", ##"rc.syncserver", "rc.progagent",
"rc.tarfiles", "rc.rpms",
"rc.startcmd"
);
}
else {
......
tmcd/common/config/rc.mounts
View file @ 337dd532
......@@ -171,7 +171,7 @@ sub doboot()
# server. All that's left is to wrap the //fs names in symlinks.
if (WINDOWS()) {
while (($remote, $local) = each %mounts) {
my $host = "fs";
my $host = "fs.bsd-fs.testbed.emulab.net"; ###"fs";
print "Link $local to //$host\n";
os_samba_mount($local, $host, 0);
}
......
tmcd/common/rc.bootsetup
View file @ 337dd532
......@@ -118,8 +118,8 @@ sub doboot()
# Check for an os dependent initialization script.
#
my $os_script = "rc." . lc($OSNAME);
if (-x "$RCDIR/$os_script") {
print("Running os dependent initialization script $os_script\n");
system("$RCDIR/$os_script");
if ($?) {
fatal("Error running $RCDIR/$os_script");
......@@ -186,7 +186,7 @@ sub doboot()
}
}
if (-x "$BINDIR/watchdog" && ! WINDOWS()) {
if (-x "$BINDIR/watchdog") {
print("Starting testbed update watchdog\n");
system("$BINDIR/watchdog start");
if ($?) {
......
tmcd/cygwinxp/GNUmakefile.in
View file @ 337dd532
......@@ -56,11 +56,16 @@ common-install: dir-install
sup-install: dir-install
SYSTEM32 = /cygdrive/c/Windows/System32
WBEM = $(SYSTEM32)/Wbem
bin-install: dir-install
# These are found in the /share/windows directory.
$(INSTALL) -m 755 $(SRCDIR)/WSName.exe $(BINDIR)/WSName.exe
$(INSTALL) -m 755 $(SRCDIR)/addusers.exe $(BINDIR)/addusers.exe
$(INSTALL) -m 755 $(SRCDIR)/addusers.exe $(BINDIR)/usrtogrp.exe
# These are used by tmcd/findif.
$(INSTALL) -m 755 $(SYSTEM32)/getmac.exe $(BINDIR)/getmac.exe
$(INSTALL) -m 755 $(WBEM)/framedyn.dll $(BINDIR)/framedyn.dll
etc-install: dir-install sysetc-remove sysetc-install
......@@ -71,7 +76,12 @@ sysetc-install: dir-install ###ifcfgs
-cp /etc/ssh_host_dsa_key /etc/ssh_host_dsa_key.user
-cp /etc/ssh_host_rsa_key /etc/ssh_host_rsa_key.user
chmod g-r /etc/ssh_host*key /etc/ssh_host*key.user
# Install an /etc/shells file.
# Watchdog assumes the ssh keys are in /etc/ssh.
ln -f -s /etc /etc/ssh
# Boot log files have to be writable by SYSTEM under rc.cygwin.
$(INSTALL) -c -m 775 -o root -g wheel -d /var/log
$(INSTALL) -c -m 775 -o root -g wheel -d /var/db
# Need an /etc/shells file for rc.acounts.
$(INSTALL) -m 755 $(SRCDIR)/shells /etc/shells
sysetc-remove:
......@@ -81,12 +91,12 @@ script-install: dir-install $(SCRIPTS)
$(INSTALL) -m 755 $(SRCDIR)/liblocsetup.pm $(BINDIR)/liblocsetup.pm
$(INSTALL) -m 755 $(SRCDIR)/startsshd $(BINDIR)/startsshd
$(INSTALL) -m 755 $(SRCDIR)/stopsshd $(BINDIR)/stopsshd
-mkdir -m 755 /sbin
$(INSTALL) -c -m 755 -o root -g wheel -d /sbin
$(INSTALL) -m 755 $(SRCDIR)/reboot /sbin/reboot
ln -f -s /bin/shutdown /sbin/shutdown
$(INSTALL) -m 755 $(SRCDIR)/rc.cygwinxp $(BINDIR)/rc/rc.cygwinxp
$(INSTALL) -m 755 $(SRCDIR)/rc.cygwinxp $(BINDIR)/rc/rc.cygwin
# The following will fail if the user login script is still busy in a shell.
$(INSTALL) -m 755 $(SRCDIR)/rc.cygwinxp-user $(BINDIR)/rc/rc.cygwinxp-user
-$(INSTALL) -m 755 $(SRCDIR)/rc.cygwinxp-user $(BINDIR)/rc/rc.cygwinxp-user
sfs-install:
......
tmcd/cygwinxp/liblocsetup.pm
View file @ 337dd532
......@@ -13,7 +13,7 @@ use Exporter;
@ISA = "Exporter";
@EXPORT =
qw ( $CP $LN $RM $CHOWN $EGREP
$NFSMOUNT $UMOUNT $SFCMOUNT $SFCUMOUNT $NTS $NET
$NFSMOUNT $UMOUNT $SFCMOUNT $SFCUMOUNT $NTS $NET $HOSTSFILE
$TMPASSWD $SFSSD $SFSCD $RPMCMD
os_account_cleanup os_accounts_start os_accounts_end
os_ifconfig_line os_etchosts_line
......@@ -71,14 +71,18 @@ $SFCUMOUNT = "$SFC/umount";
$NTS = "/cygdrive/c/WINDOWS/system32";
$NET = "$NTS/net";
$NETSH = "$NTS/netsh";
$NTE = "$NTS/drivers/etc";
$HOSTSFILE = "$NTE/hosts";
$BASH = "/bin/bash";
#
# These are not exported
#
my $ADDUSERS = "$BINDIR/addusers.exe";
my $IFCONFIGBIN = "/sbin/ifconfig";
my $IFCONFIG = "$IFCONFIGBIN %s inet %s netmask %s";
my $IFCONFIGBIN = "$NETSH interface ip set address";
my $IFCONFIG = "$IFCONFIGBIN name=\"%s\" source=static addr=%s mask=%s";
my $IFC_1000MBS = "1000baseTx";
my $IFC_100MBS = "100baseTx";
my $IFC_10MBS = "10baseT";
......@@ -132,192 +136,8 @@ sub os_ifconfig_line($$$$$$$;$$)
{
my ($iface, $inet, $mask, $speed, $duplex, $aliases,
$iface_type, $settings, $rtabid) = @_;
my ($miirest, $miisleep, $miisetspd, $media);
my ($uplines, $downlines);
#
# Special handling for new style interfaces (which have settings).
# This should all move into per-type modules at some point.
#
if (defined($settings) && exists($settings->{"protocol"}) &&
$settings->{"protocol"} ne "ethernet") {
#
# Setting the protocol is special and appears to be card specific.
# How stupid is that!
#
my $protocol = $settings->{"protocol"};
my $privcmd = "";
if ($iface_type eq "ath") {
$privcmd = "/sbin/iwpriv $iface mode ";
SWITCH1: for ($protocol) {
/^80211a$/ && do {
$privcmd .= "1";
last SWITCH1;
};
/^80211b$/ && do {
$privcmd .= "2";
last SWITCH1;
};
/^80211g$/ && do {
$privcmd .= "3";
last SWITCH1;
};
}
}
else {
warn("*** WARNING: Unsupported interface type $iface_type!\n");
return undef;
}
#
# At the moment, we expect just the various flavors of 80211, and
# we treat them all the same, configuring with iwconfig and iwpriv.
#
my $iwcmd = "/sbin/iwconfig $iface ";
#
# We demand to be given an ssid.
#
if (!exists($settings->{"ssid"})) {
warn("*** WARNING: No SSID provided for $iface!\n");
return undef;
}
$iwcmd .= "essid ". $settings->{"ssid"};
# If we do not get a channel, pick one.
if (exists($settings->{"channel"})) {
$iwcmd .= " channel " . $settings->{"channel"};
}
else {
$iwcmd .= " channel 3";
}
# txpower and rate default to auto if not specified.
if (exists($settings->{"rate"})) {
$iwcmd .= " rate " . $settings->{"rate"};
}
else {
$iwcmd .= " rate auto";
}
if (exists($settings->{"txpower"})) {
$iwcmd .= " txpower " . $settings->{"txpower"};
}
else {
$iwcmd .= " txpower auto";
}
# Allow this too.
if (exists($settings->{"sensitivity"})) {
$iwcmd .= " sens " . $settings->{"sensitivity"};
}
#
# We demand to be told if we are the master or a peon.
# This needs to be last for some reason.
#
if (!exists($settings->{"accesspoint"})) {
warn("*** WARNING: No accesspoint provided for $iface!\n");
return undef;
}
my $accesspoint = $settings->{"accesspoint"};
my $accesspointwdots;
# Allow either dotted or undotted notation!
if ($accesspoint =~ /^(\w{2})(\w{2})(\w{2})(\w{2})(\w{2})(\w{2})$/) {
$accesspointwdots = "$1:$2:$3:$4:$5:$6";
}
elsif ($accesspoint =~
/^(\w{2}):(\w{2}):(\w{2}):(\w{2}):(\w{2}):(\w{2})$/) {
$accesspointwdots = $accesspoint;
$accesspoint = "${1}${2}${3}${4}${5}${6}";
}
else {
warn("*** WARNING: Improper format for MAC ($accesspoint) ".
"provided for $iface!\n");
return undef;
}
if (libsetup::findiface($accesspoint) eq $iface) {
$iwcmd .= " mode Master";
}
else {
$iwcmd .= " mode Managed ap $accesspointwdots";
}
$uplines = sprintf($IFCONFIG, $iface, $inet, $mask) . "\n";
$uplines .= $privcmd . "\n";
$uplines .= $iwcmd;
$downlines = "$IFCONFIGBIN $iface down";
return ($uplines, $downlines);
}
#
# Need to check units on the speed. Just in case.
#
if ($speed =~ /(\d*)([A-Za-z]*)/) {
if ($2 eq "Mbps") {
$speed = $1;
}
elsif ($2 eq "Kbps") {
$speed = $1 / 1000;
}
else {
warn("*** Bad speed units $2 in ifconfig, default to 100Mbps\n");
$speed = 100;
}
if ($speed == 1000) {
$media = $IFC_1000MBS;
}
elsif ($speed == 100) {
$media = $IFC_100MBS;
}
elsif ($speed == 10) {
$media = $IFC_10MBS;
}
else {
warn("*** Bad Speed $speed in ifconfig, default to 100Mbps\n");
$speed = 100;
$media = $IFC_100MBS;
}
}
if ($duplex eq "full") {
$media = "$media-$IFC_FDUPLEX";
}
elsif ($duplex eq "half") {
$media = "$media-$IFC_HDUPLEX";
}
else {
warn("*** Bad duplex $duplex in ifconfig, default to full\n");
$duplex = "full";
$media = "$media-$IFC_FDUPLEX";
}
#
# Linux is apparently changing from mii-tool to ethtool but some drivers
# don't support the new interface (3c59x), some don't support the old
# interface (e1000), and some (eepro100) support the new interface just
# enough that they can report success but not actually do anything. Sweet!
#
my $ethtool;
if (-e "/sbin/ethtool") {
$ethtool = "/sbin/ethtool";
} elsif (-e "/usr/sbin/ethtool") {
$ethtool = "/usr/sbin/ethtool";
}
if (defined($ethtool)) {
# this seems to work for returning an error on eepro100
$uplines =
"if $ethtool $iface >/dev/null 2>&1; then\n " .
" $ethtool -s $iface autoneg off speed $speed duplex $duplex\n " .
"else\n " .
" /sbin/mii-tool --force=$media $iface\n " .
"fi\n ";
} else {
$uplines = "/sbin/mii-tool --force=$media $iface\n ";
}
if ($inet ne "") {
$uplines .= sprintf($IFCONFIG, $iface, $inet, $mask);
$downlines = "$IFCONFIGBIN $iface down";
......@@ -342,7 +162,8 @@ sub os_etchosts_line($$$)
{
my ($name, $ip, $aliases) = @_;
return sprintf("%s\t%s %s", $ip, $name, $aliases);
# Note: space rather than tab after the host name on Windows.
return sprintf("%s %s %s", $ip, $name, $aliases);
}
#
......
tmcd/cygwinxp/rc.cygwinxp
View file @ 337dd532
......@@ -18,7 +18,8 @@ uname -r > $iscygwin
chmod g+w $iscygwin
chmod -f g-w /etc/emulab
# Set up for autologin as the swapin user.
# Set up for autologin as the swapin user after reboot.
# Also run rc.cygwinxp-user as part of all logins.
tmcc=/usr/local/etc/emulab/tmcc.bin
swapper=`$tmcc creator | sed 's|.*SWAPPER=\([^ ]*\).*|\1|'`
echo "`date`: Set to autologin as $swapper." >> $logfile
......@@ -26,18 +27,22 @@ alogdir=/var/emulab/boot
autologin=$alogdir/autologin.reg
chmod -f g+w $alogdir
rm -f $autologin
# Note the double-doubled backslashes below. Bash and regedit each eat a level.
cat <<EOF > $autologin
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
"AutoAdminLogon"="1"
"DefaultUserName"="$swapper"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"EmulabLogin"="C:\\\\cygwin\\\\bin\\\\bash /usr/local/etc/emulab/rc/rc.cygwinxp-user"
EOF
chmod g+rw $autologin
chmod -f g-w $alogdir
winautologin=`cygpath -w $autologin`
if ! regedit -s $winautologin ; then
echo "`date`: regedit -s $winautologin failed with code $?." >> $logfile
regedit=/cygdrive/c/WINDOWS/regedit
if ! $regedit -s "$winautologin" ; then
echo "`date`: $regedit -s $winautologin failed with code $?." >> $logfile
fi
# Make sure the computer name is right, reboots to change it if necessary.
......
tmcd/cygwinxp/rc.cygwinxp-user
View file @ 337dd532
......@@ -20,7 +20,8 @@ fi
# Shares are local to the Win32 login session context.
# We must process a user name and password for the first one to be opened, and it
# has to go onto a drive letter. After that, we can use UNC //host paths freely.
host=fs
###host=fs
host=fs.bsd-fs.testbed.emulab.net
pswd=`tmcc accounts | awk '/LOGIN='$user' /{print substr($0,index($0," PSWD=")+9,8)}'`
echo "Connecting to //$host as $user."
while ! net use Z: '\\'$host'\'$user "$pswd" /user:$user /persistent:no
......
tmcd/cygwinxp/startsshd
View file @ 337dd532
......@@ -51,6 +51,7 @@ chmod o-r /etc/ssh*key.user
echo "Starting new sshd daemon as $user."
(CYGWIN="ntsec tty" /usr/sbin/sshd -p 2222 -o "UsePrivilegeSeparation no" \
-h /etc/ssh_host_key.user -h /etc/ssh_host_dsa_key.user &)
sleep 2
# Remember this one separately from the SYSTEM sshd.
chmod -f g+w $upidfile
......
tmcd/findif.c
View file @ 337dd532
......@@ -223,7 +223,10 @@ find_iface(char *macaddr)
static int
find_iface(char *macaddr)
{
FILE *fp = popen("getmac /nh /v /fo csv", "r");
/* We copy the Windows getmac.exe and library framedyn.dll into $BINDIR
* because our path gets "untainted" into a pure Unix form in rc scripts.
*/
FILE *fp = popen("bash -c 'cd $BINDIR; getmac /nh /v /fo csv'", "r");
char buf[BUFSIZ];
while (fgets(buf, BUFSIZ, fp) != NULL) {
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment