All new accounts created on Gitlab now require administrator approval. If you invite any collaborators, please let Flux staff know so they can approve the accounts.

Commit 2b89effa authored by Leigh B. Stoller's avatar Leigh B. Stoller

First round of configure changes. Lots of makefile rewriting.

parent 34f6d836
# Testbed wide makefile.
#
# Testbed Makefile
#
SRCDIR = @srcdir@
TESTBED_SRCDIR = @top_srcdir@
SUBDIRS = assign capture db discvr lib os pxe security tbsetup tip tmcd www
include Makeconf
SUBDIRS = lib assign discvr tbsetup db os security pxe tmcd www tip capture
all: all-subdirs
install: all
install: install-subdirs
echo "DON'T FORGET TO RUN A POST-INSTALL AS ROOT"
post-install:
@$(MAKE) -C tbsetup post-install
@$(MAKE) -C security post-install
clean: clean-subdirs
distclean: distclean-subdirs
rm -f Makeconf GNUmakefile config.status config.cache config.log
# How to recursively descend into subdirectories to make general
# targets such as `all'.
......@@ -18,14 +27,6 @@ post-install:
# By default, make any target by descending into subdirectories.
%: %-subdirs ;
clean:
@$(MAKE) -C assign clean
@$(MAKE) -C discvr clean
@$(MAKE) -C os clean
@$(MAKE) -C tmcd clean
@$(MAKE) -C os/imagezip clean
@$(MAKE) -C tbsetup/checkpass clean
.PHONY: post-install
# Get rid of a bunch of nasty built-in implicit rules.
......
......@@ -21,5 +21,21 @@ $(INSTALL_LIBDIR)/%: %
-mkdir -p $(INSTALL_LIBDIR)
$(INSTALL_PROGRAM) $< $@
$(INSTALL_ETCDIR)/%: %
@echo "Installing $<"
-mkdir -p $(INSTALL_ETCDIR)
$(INSTALL_DATA) $< $@
$(INSTALL_WWWDIR)/%: %
@echo "Installing $<"
-mkdir -p $(INSTALL_WWWDIR)
$(INSTALL_DATA) $< $@
CFLAGS += $(LOCALCFLAGS)
vpath %.c $(SRCDIR)
clean:
distclean: clean
rm -f GNUmakefile $(DISTCLEAN_FILES)
#
# Stick all the little piddly defs in here.
#
prefix = /usr/testbed
exec_prefix = ${prefix}
INSTALL = /usr/bin/install -c
INSTALL_PROGRAM = ${INSTALL} -m 755
INSTALL_DATA = ${INSTALL} -m 444
INSTALL_DIR = $(exec_prefix)
INSTALL_BINDIR = $(exec_prefix)/bin
INSTALL_SBINDIR = $(exec_prefix)/sbin
INSTALL_LIBDIR = $(exec_prefix)/lib
INSTALL_WWWDIR = $(exec_prefix)/www
#
# Most of the configure-substitution magic is done here.
# All the other makefiles in the NodeOS include
# this fragment
#
export CC = @CC@
export CXX = @CXX@
export LD = @CC@ ${CFLAGS}
export STRIP = @STRIP@
export RANLIB = @RANLIB@
prefix = @prefix@
exec_prefix = @exec_prefix@
TBDBNAME = @TBDBNAME@
CPPFLAGS = @CPPFLAGS@
CFLAGS += @CFLAGS@
CXXFLAGS += @CXXFLAGS@
LDFLAGS = @LDFLAGS@
OPT_CFLAGS = @OPT_CFLAGS@
INSTALL_TOPDIR = @exec_prefix@
INSTALL_DIR = @exec_prefix@
INSTALL_LIBDIR = @libdir@
INSTALL_BINDIR = @bindir@
INSTALL_SBINDIR = @sbindir@
INSTALL_LIBEXECDIR = @libexecdir@
INSTALL_ETCDIR = @sysconfdir@
INSTALL_WWWDIR = @exec_prefix@/www
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL@ -m 755
INSTALL_DATA = @INSTALL@ -m 444
......@@ -2,11 +2,13 @@
# Insert Copyright Here.
#
include ../Makeconf
all: assign
include ../GNUmakerules
CXX=/usr/bin/g++
CC=/usr/bin/gcc
LEDA=/usr/testbed/LEDA/LEDA-4.0
LEDA=@LEDA@
OBJS=score.o parse_top.o parse_ptop.o
LIBS+=-L${LEDA} -lD3 -lW -lP -lG -lL -L/usr/X11R6/lib -lX11 -lm -L.
LDFLAGS+= -O3 -fomit-frame-pointer -m486
......@@ -16,8 +18,6 @@ CXXFLAGS += -Wall -O3 -fomit-frame-pointer -m486
#CXXFLAGS += -O0 -g -Wall -DSCORE_DEBUG -DVERBOSE -DSCORE_DEBUG_MORE
DEPLIBS=$(OBJS)
all: assign
assign: ${DEPLIBS} ${OBJS} assign.o
${CXX} assign.o -o assign ${LIBS} $(OBJS) ${LDFLAGS}
......@@ -31,4 +31,3 @@ install: $(INSTALL_BINDIR)/assign $(INSTALL_LIBDIR)/assign
clean:
/bin/rm -f *.o assign
#! /bin/sh
# Attempt to guess a canonical system name.
# Copyright (C) 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Written by Per Bothner <bothner@cygnus.com>.
# The master version of this file is at the FSF in /home/gd/gnu/lib.
#
# This script attempts to guess a canonical system name similar to
# config.sub. If it succeeds, it prints the system name on stdout, and
# exits with 0. Otherwise, it exits with 1.
#
# The plan is that this can be called by configure scripts if you
# don't specify an explicit system type (host/target name).
#
# Only a few systems have been added to this list; please add others
# (but try to keep the structure clean).
#
# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (ghazi@noc.rutgers.edu 8/24/94.)
if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
PATH=$PATH:/.attbin ; export PATH
fi
UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15
# Note: order is significant - the case branches are not exclusive.
case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
alpha:OSF1:V*:*)
# After 1.2, OSF1 uses "V1.3" for uname -r.
echo alpha-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^V//'`
exit 0 ;;
alpha:OSF1:*:*)
# 1.2 uses "1.2" for uname -r.
echo alpha-dec-osf${UNAME_RELEASE}
exit 0 ;;
21064:Windows_NT:50:3)
echo alpha-dec-winnt3.5
exit 0 ;;
amiga:NetBSD:*:*)
echo m68k-cbm-netbsd${UNAME_RELEASE}
exit 0 ;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
echo arm-acorn-riscix${UNAME_RELEASE}
exit 0;;
arm32:NetBSD:*:*)
echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
exit 0 ;;
Pyramid*:OSx*:*:*)
if test "`(/bin/universe) 2>/dev/null`" = att ; then
echo pyramid-pyramid-sysv3
else
echo pyramid-pyramid-bsd
fi
exit 0 ;;
sun4*:SunOS:5.*:*)
echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
i86pc:SunOS:5.*:*)
echo i386-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
sun4*:SunOS:6*:*)
# According to config.sub, this is the proper way to canonicalize
# SunOS6. Hard to guess exactly what SunOS6 will be like, but
# it's likely to be more like Solaris than SunOS4.
echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
sun4*:SunOS:*:*)
case "`/usr/bin/arch -k`" in
Series*|S4*)
UNAME_RELEASE=`uname -v`
;;
esac
# Japanese Language versions have a version number like `4.1.3-JL'.
echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
exit 0 ;;
sun3*:SunOS:*:*)
echo m68k-sun-sunos${UNAME_RELEASE}
exit 0 ;;
atari*:NetBSD:*:*)
echo m68k-atari-netbsd${UNAME_RELEASE}
exit 0 ;;
sun3*:NetBSD:*:*)
echo m68k-sun-netbsd${UNAME_RELEASE}
exit 0 ;;
mac68k:NetBSD:*:*)
echo m68k-apple-netbsd${UNAME_RELEASE}
exit 0 ;;
RISC*:ULTRIX:*:*)
echo mips-dec-ultrix${UNAME_RELEASE}
exit 0 ;;
VAX*:ULTRIX*:*:*)
echo vax-dec-ultrix${UNAME_RELEASE}
exit 0 ;;
mips:*:5*:RISCos)
echo mips-mips-riscos${UNAME_RELEASE}
exit 0 ;;
m88k:CX/UX:7*:*)
echo m88k-harris-cxux7
exit 0 ;;
m88k:*:4*:R4*)
echo m88k-motorola-sysv4
exit 0 ;;
m88k:*:3*:R3*)
echo m88k-motorola-sysv3
exit 0 ;;
AViiON:dgux:*:*)
if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
-o ${TARGET_BINARY_INTERFACE}x = x ] ; then
echo m88k-dg-dgux${UNAME_RELEASE}
else
echo m88k-dg-dguxbcs${UNAME_RELEASE}
fi
exit 0 ;;
M88*:DolphinOS:*:*) # DolphinOS (SVR3)
echo m88k-dolphin-sysv3
exit 0 ;;
M88*:*:R3*:*)
# Delta 88k system running SVR3
echo m88k-motorola-sysv3
exit 0 ;;
XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
echo m88k-tektronix-sysv3
exit 0 ;;
Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
echo m68k-tektronix-bsd
exit 0 ;;
*:IRIX*:*:*)
echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
exit 0 ;;
????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
i[34]86:AIX:*:*)
echo i386-ibm-aix
exit 0 ;;
*:AIX:2:3)
if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
sed 's/^ //' << EOF >dummy.c
#include <sys/systemcfg.h>
main()
{
if (!__power_pc())
exit(1);
puts("powerpc-ibm-aix3.2.5");
exit(0);
}
EOF
${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
rm -f dummy.c dummy
echo rs6000-ibm-aix3.2.5
elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
echo rs6000-ibm-aix3.2.4
else
echo rs6000-ibm-aix3.2
fi
exit 0 ;;
*:AIX:*:4)
if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then
IBM_ARCH=rs6000
else
IBM_ARCH=powerpc
fi
if grep bos410 /usr/include/stdio.h >/dev/null 2>&1; then
IBM_REV=4.1
elif grep bos411 /usr/include/stdio.h >/dev/null 2>&1; then
IBM_REV=4.1.1
else
IBM_REV=4.${UNAME_RELEASE}
fi
echo ${IBM_ARCH}-ibm-aix${IBM_REV}
exit 0 ;;
*:AIX:*:*)
echo rs6000-ibm-aix
exit 0 ;;
ibmrt:4.4BSD:*|romp-ibm:BSD:*)
echo romp-ibm-bsd4.4
exit 0 ;;
ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and
echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
exit 0 ;; # report: romp-ibm BSD 4.3
*:BOSX:*:*)
echo rs6000-bull-bosx
exit 0 ;;
DPX/2?00:B.O.S.:*:*)
echo m68k-bull-sysv3
exit 0 ;;
9000/[34]??:4.3bsd:1.*:*)
echo m68k-hp-bsd
exit 0 ;;
hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
echo m68k-hp-bsd4.4
exit 0 ;;
9000/[3478]??:HP-UX:*:*)
case "${UNAME_MACHINE}" in
9000/31? ) HP_ARCH=m68000 ;;
9000/[34]?? ) HP_ARCH=m68k ;;
9000/7?? | 9000/8?7 ) HP_ARCH=hppa1.1 ;;
9000/8?? ) HP_ARCH=hppa1.0 ;;
esac
HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
echo ${HP_ARCH}-hp-hpux${HPUX_REV}
exit 0 ;;
3050*:HI-UX:*:*)
sed 's/^ //' << EOF >dummy.c
#include <unistd.h>
int
main ()
{
long cpu = sysconf (_SC_CPU_VERSION);
/* The order matters, because CPU_IS_HP_MC68K erroneously returns
true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
results, however. */
if (CPU_IS_PA_RISC (cpu))
{
switch (cpu)
{
case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
default: puts ("hppa-hitachi-hiuxwe2"); break;
}
}
else if (CPU_IS_HP_MC68K (cpu))
puts ("m68k-hitachi-hiuxwe2");
else puts ("unknown-hitachi-hiuxwe2");
exit (0);
}
EOF
${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
rm -f dummy.c dummy
echo unknown-hitachi-hiuxwe2
exit 0 ;;
9000/7??:4.3bsd:*:* | 9000/8?7:4.3bsd:*:* )
echo hppa1.1-hp-bsd
exit 0 ;;
9000/8??:4.3bsd:*:*)
echo hppa1.0-hp-bsd
exit 0 ;;
hp7??:OSF1:*:* | hp8?7:OSF1:*:* )
echo hppa1.1-hp-osf
exit 0 ;;
hp8??:OSF1:*:*)
echo hppa1.0-hp-osf
exit 0 ;;
parisc*:Lites*:*:*)
echo hppa1.1-hp-lites
exit 0 ;;
C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
echo c1-convex-bsd
exit 0 ;;
C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
if getsysinfo -f scalar_acc
then echo c32-convex-bsd
else echo c2-convex-bsd
fi
exit 0 ;;
C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
echo c34-convex-bsd
exit 0 ;;
C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
echo c38-convex-bsd
exit 0 ;;
C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
echo c4-convex-bsd
exit 0 ;;
CRAY*X-MP:*:*:*)
echo xmp-cray-unicos
exit 0 ;;
CRAY*Y-MP:*:*:*)
echo ymp-cray-unicos${UNAME_RELEASE}
exit 0 ;;
CRAY*C90:*:*:*)
echo c90-cray-unicos${UNAME_RELEASE}
exit 0 ;;
CRAY-2:*:*:*)
echo cray2-cray-unicos
exit 0 ;;
hp3[0-9][05]:NetBSD:*:*)
echo m68k-hp-netbsd${UNAME_RELEASE}
exit 0 ;;
i[34]86:BSD/386:*:* | *:BSD/OS:*:*)
echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
exit 0 ;;
*:FreeBSD:*:*)
echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
exit 0 ;;
*:NetBSD:*:*)
echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
exit 0 ;;
*:GNU:*:*)
echo `echo ${UNAME_MACHINE}|sed -e 's,/.*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
exit 0 ;;
*:Linux:*:*)
# Systems without a BFD linker
if test -d /usr/lib/ldscripts/. ; then
:
else
echo "${UNAME_MACHINE}-unknown-linuxoldld"
exit 0
fi
# Determine whether the default compiler is a.out or elf
cat >dummy.c <<EOF
main(argc, argv)
int argc;
char *argv[];
{
#ifdef __ELF__
printf ("%s-unknown-linux\n", argv[1]);
#else
printf ("%s-unknown-linuxaout\n", argv[1]);
#endif
return 0;
}
EOF
${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
rm -f dummy.c dummy;;
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
# are messed up and put the nodename in both sysname and nodename.
i[34]86:DYNIX/ptx:4*:*)
echo i386-sequent-sysv4
exit 0 ;;
i[34]86:*:4.*:* | i[34]86:SYSTEM_V:4.*:*)
if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
else
echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}
fi
exit 0 ;;
i[34]86:*:3.2:*)
if test -f /usr/options/cb.name; then
UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
echo ${UNAME_MACHINE}-unknown-isc$UNAME_REL
elif /bin/uname -X 2>/dev/null >/dev/null ; then
UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
echo ${UNAME_MACHINE}-unknown-sco$UNAME_REL
else
echo ${UNAME_MACHINE}-unknown-sysv32
fi
exit 0 ;;
Intel:Mach:3*:*)
echo i386-unknown-mach3
exit 0 ;;
paragon:*:*:*)
echo i860-intel-osf1
exit 0 ;;
i860:*:4.*:*) # i860-SVR4
if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
else # Add other i860-SVR4 vendors below as they are discovered.
echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
fi
exit 0 ;;
mini*:CTIX:SYS*5:*)
# "miniframe"
echo m68010-convergent-sysv
exit 0 ;;
M680[234]0:*:R3V[567]*:*)
test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0)
uname -p 2>/dev/null | grep 86 >/dev/null \
&& echo i486-ncr-sysv4.3 && exit 0 ;;
3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
uname -p 2>/dev/null | grep 86 >/dev/null \
&& echo i486-ncr-sysv4 && exit 0 ;;
m680[234]0:LynxOS:2.2*:*)
echo m68k-lynx-lynxos${UNAME_RELEASE}
exit 0 ;;
mc68030:UNIX_System_V:4.*:*)
echo m68k-atari-sysv4
exit 0 ;;
i[34]86:LynxOS:2.2*:*)
echo i386-lynx-lynxos${UNAME_RELEASE}
exit 0 ;;
TSUNAMI:LynxOS:2.2*:*)
echo sparc-lynx-lynxos${UNAME_RELEASE}
exit 0 ;;
rs6000:LynxOS:2.2*:*)
echo rs6000-lynx-lynxos${UNAME_RELEASE}
exit 0 ;;
RM*:SINIX-*:*:*)
echo mips-sni-sysv4
exit 0 ;;
*:SINIX-*:*:*)
if uname -p 2>/dev/null >/dev/null ; then
UNAME_MACHINE=`(uname -p) 2>/dev/null`
echo ${UNAME_MACHINE}-sni-sysv4
else
echo ns32k-sni-sysv
fi
exit 0 ;;
esac
#echo '(No uname command or uname output not recognized.)' 1>&2
#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
cat >dummy.c <<EOF
main ()
{
#if defined (sony)
#if defined (MIPSEB)
/* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
I don't know.... */
printf ("mips-sony-bsd\n"); exit (0);
#else
#include <sys/param.h>
printf ("m68k-sony-newsos%s\n",
#ifdef NEWSOS4
"4"
#else
""
#endif
); exit (0);
#endif
#endif
#if defined (__arm) && defined (__acorn) && defined (__unix)
printf ("arm-acorn-riscix"); exit (0);
#endif
#if defined (hp300) && !defined (hpux)
printf ("m68k-hp-bsd\n"); exit (0);
#endif
#if defined (NeXT)
#if !defined (__ARCHITECTURE__)
#define __ARCHITECTURE__ "m68k"
#endif
int version;
version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
printf ("%s-next-nextstep%s\n", __ARCHITECTURE__, version==2 ? "2" : "3");
exit (0);
#endif
#if defined (MULTIMAX) || defined (n16)
#if defined (UMAXV)
printf ("ns32k-encore-sysv\n"); exit (0);
#else
#if defined (CMU)
printf ("ns32k-encore-mach\n"); exit (0);
#else
printf ("ns32k-encore-bsd\n"); exit (0);
#endif
#endif
#endif
#if defined (__386BSD__)
printf ("i386-unknown-bsd\n"); exit (0);
#endif
#if defined (sequent)
#if defined (i386)
printf ("i386-sequent-dynix\n"); exit (0);
#endif
#if defined (ns32000)
printf ("ns32k-sequent-dynix\n"); exit (0);
#endif
#endif
#if defined (_SEQUENT_)
printf ("i386-sequent-ptx\n"); exit (0);
#endif
#if defined (vax)
#if !defined (ultrix)
printf ("vax-dec-bsd\n"); exit (0);
#else
printf ("vax-dec-ultrix\n"); exit (0);
#endif
#endif
#if defined (alliant) && defined (i860)
printf ("i860-alliant-bsd\n"); exit (0);
#endif
exit (1);
}
EOF
${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0
rm -f dummy.c dummy
# Apollos put the system type in the environment.
test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }