setup.txt 15.6 KB
Newer Older
1
##### Setting up the Utah Network Testbed software on a boss node
2
##### Last updated  February 27, 2002
3 4
##### Tested on FreeBSD 4.3

5 6 7
Note: steps labeled "Local Only" are only required when setting up a testbed
with local nodes - they can be skipped in a widearea-only testbed.

8 9 10 11 12 13 14
##### Step 0

First of all, the machine should be configured correctly for the network it is
on, have the root password set, etc.

##### Step 1 - Package installation

15 16
Install the necessary packages. The following are necessary, and are
the default versions in the FreeBSD 4.3 "ports" collection:
17 18 19 20 21 22 23 24 25 26 27 28
(Ports marked with an 'L' are only needed if you have local nodes.)

  apache+mod_ssl-1.3.19+2.8.2 The Apache 1.3 webserver with SSL/TLS functionalit
  cvsupd-bin-16.1     A general network file distribution system optimized for C
  fping-2.2b1         Quickly ping N hosts w/o flooding the network
  gd-1.8.4_1          A graphics library for fast PNG creation
  gmake-3.79.1        GNU version of 'make' utility
  graphviz-1.7c       Graph Visualization Software from AT&T and Bell Labs
L isc-dhcp-2.0.5      ISC Dynamic Host Configuration Protocol client and server
  linuxthreads-2.1.3_2 POSIX pthreads implementation using rfork to generate ker
  mhash-0.8.9         Library provides an easy way to access strong hashes such
  mod_auth_mysql-2.20 Allows users to use MySQL databases for user authenticatio
Leigh B. Stoller's avatar
Leigh B. Stoller committed
29
  mod_php4-4.1.1      PHP4 module for Apache
30 31 32 33 34 35 36 37 38 39 40 41 42 43
  mysql-client-3.23.36 Multithreaded SQL database (client)
  mysql-server-3.23.36 Multithreaded SQL database (server)
  otcl-1.0a6          MIT Object Tcl
  p5-DBI-1.15         The perl5 Database Interface.  Required for DBD::* modules
  p5-GD-1.32_2        A perl5 interface to Gd Graphics Library
  p5-Mysql-modules-1.2215 Perl5 modules for accessing MySQL databases
L p5-SNMP-4.2.0       A perl5 module for interfacing with the CMU SNMP library
L p5-SNMP_Session-0.83 A perl5 module for providing rudimentary access to SNMPv1
  p5-BSD-Resource	    BSD resource goo
  rpm-3.0.6_5         The Red Hat Package Manager
  swig-1.1p5_5        Simplified Wrapper and Interface Generator
  tcl-8.2.3           Tool Command Language
  tcl-sql-20000114_1  TCL module for accessing MySQL databases
L ucd-snmp-4.2        An extendable SNMP implimentation
44

Leigh B. Stoller's avatar
Leigh B. Stoller committed
45 46 47
IMPORTANT: The mhash package should be installed _before_ the mod_php4 port is
built. When building mod_php4, you will be given a menu to choose the various
features you want support for. Make sure to select support for mhash.
48

49
Note on TCL: Do NOT install tcl83; otcl, which is used by some testbed
50 51 52
scripts, requires tcl82. When you install the tcl-sql package, it will be put
in the library directory for the latest version of tcl you have installed, so
if you have tcl83 installed at the time, you will have tcl-sql support under
53 54 55 56 57
8.3.X, but not under 8.2.X (which testbed scripts use) Newer versions of
the FreeBSD port have a TCL_VERSION variable you can use to get around
this problem - Stick the line:
TCL_VERSION=tcl8.2 in /etc/make.conf
before building, and you should be fine.
58

59 60 61
For the most part, subsitituting newer versions of the packages should be OK,
but know that we haven't tested them... The one exception is version 3.23.47 
of the mysql packages. In fact, we recommend 3.23.47, as it fixes some
62
boot-time problems that we've had with 3.23.36.
63

64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86
Finally, you will need to download and install elvin, which is the core of our
event system. You can download it from: http://elvin.dstc.edu.au/ . You'll
need to grab both the C 'libelvin' distribution and elvind . So far, we have
only tried releases in the 4.0 branch. Compile these two (libelvin first)
with the standard untar/configure/make procedure. When configuring libelvin,
be sure to give the '--enable-threads' option.

Many of these packages need to be started by RC scripts. First, the
mysql-client rc script needs to run before ANY testbed services are started!
You can ensure this by changing directories to /usr/local/etc/rc.d and renaming
'mysql-client.sh' to '1.mysql-client.sh'. Also, we use some different options
when staring mysqld, so remove the 'mysql-server.sh'. (We'll replace it in a
second.) Furthermore, dhcpd needs to start before proxydhcp, so rename
'dhcpd.sh' to '2.dhcpd.sh'. You will also need to install the '3.testbed.sh',
'cvsupd.sh', '2.elvind.sh', and '2.mysql-server.sh' scripts, which are in the
rc.d directory of the testbed tree - you can install them by doing a 'gmake
install' in that directory. Finally, remove the 'snmpd.sh' script, because
we don't need to be running it, and it may have security vulernabilities.

Notes for newer versions of FreeBSD: Newer versions of the mysql port install
the starup script as '00mysql-client.sh' - you're fine either leaving it with
that name, or renaming it as suggested above. Also, newer versions of the
dhcpd port install their startup script as 'isc-dhcpd.sh.sample' - just
87
rename this as suggested above.
88

89 90
##### Step 2 - LEDA

91 92 93
We rely on a software package call LEDA which we are not allowed to
distribute (source *or* binary), and is currently not being
distributed by the authors. As a result, we will distribute a binary
94 95 96 97 98
for the one program (assign) that requires linking with the LEDA
library. In the meantime we will be working on removing our dependence
on the LEDA library.

The program in question is assign (see the assign subdir). Please
99 100 101 102
contact us if you need to replace it. The default operation of
configure is to assume the existence of assign/assign.bin in the
source tree. However, you can override that by using the configure 
option --with-assignbinary=/path/to/assign/binary.
103 104 105

##### Step 3 - Testbed tree configuration/installation

106 107
It is best to add the following group before creating the following
directories. Basically, testbed software should be in the tbadmin
108 109
group. Run this command as root. (NOTE: The numeric gid used for the
tbadmin group must be greater than 100)
110

111
	pw groupadd tbadmin -g 101
112
	
113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145
Configure the testbed tree. Many of the configuration parameters are stored in
a 'defs' file. Make a copy of the defs-default file (found in the root of
the testbed tree,) and customize it for your site. The key variables
are:
WWWDEFS - The name of the defs file to use for the web pages. Instructions
	for this file are below
TBADMINGROUP - The name of the group you created above, probaby tbadmin
TBOPSEMAIL - An email address for the 'operations staff'. Copies of
	error messages, etc. will get sent to this address, and in some
	cases users are directed to this address if they have questions and/or
	problems.
TBLOGSEMAIL - An email address to which some logs (experiment
	creation/deletion, etc.) will get sent.
DELAYCAPACITY - Maximum delay capacity of any nodes. Set to 1 prevent the
	same node from acting as multiple delay nodes.
BOSSNODE - Fully-qualified hostname of the boss node
USERNODE - Fully-qualified hostname of the users node (the node to which
	users will log on to control their nodes, etc.)
FSNODE - Fully-qualified hostname of the NFS server. (In our setup, this is
	the same machine as the users node.)
OURDOMAIN - The domain in which this testbed lies
FSDIR_GROUPS - The _real_ pathname (no symbolic links, etc.) of the groups
	directory on the FSNODE. See the setup-ops.txt file for the
	instructions for creating this directory.
FSDIR_PROJ - Ditto, for the proj directory
FSDIR_USERS - Ditto, for the users (home) directory

Other variables can generally be left alone. Pass the name of this file to
configure with the --with-TBDEFS option.

You'll also need to make a defs file for the web system. This is found in
the www/ directory of the testbed source tree. Copy default-defs.php3 to
<name>-defs.php3, and put <name> into WWWDEFS in the main defs file. The
146
main variables to worry about are:
147 148 149 150 151 152 153 154
$WWWHOST, $TBAUTHDOMAIN - replace emulab.net with your domain
$THISHOMEBASE, $THISPROJECT - Use the name of your site
$TBMAIL* - These work like the mail addresses of the same names in the
	defs file above. The new addresses are the approval address, to which
	requests to start projects are sent, and the audit address, which is
	CCed on certain mail sent to users.
$TBMAINSITE - Set this to 0

155 156 157
Create the /usr/testbed directory. Make sure that this directory is writable to
the tbadmin group.

158 159 160
Now, build and install the software. For example, I have the testbed source in
~/testbed, and use the ~/tbobj directory to do my builds in. To use the
defs-ricci-emulab defs file in my home directory, I would do:
161 162

cd ~/tbobj
163
~/testbed/configure --with-TBDEFS=/users/ricci/testbed/defs-ricci-emulab
164 165
gmake
gmake boss-install
166
sudo gmake post-install
167 168

The 'post-install' target needs to be done as root, because certain scripts
169
need to be setuid root.
170

171 172 173 174 175
Also, you'll need to create the 'tbdb' database (described in the next step)
before you can do the install, because we check to make sure that the software
you're installing matches the running database. Obviously, this can't be done
until the database is running.

176 177
##### Step 4 - Database Creation

178
See the file setup-db.txt in this directory 
179

180
##### Step 5 - Directories to create, and other misc. filesystem changes
181

182 183
NFS - Make the machine an NFS server and client with the following in
/etc/rc.conf:
184 185 186 187
nfs_server_enable="YES"
nfs_server_flags="-u -t -n 16"
nfs_client_enable="YES"

188 189
You also need some cross mounts between bossnode and fs. For example, on
one of our boss nodes, we have the following in /etc/fstab
190

191 192 193 194
    fs.mini.emulab.net:/z/users     /users  nfs     rw      0       0
    fs.mini.emulab.net:/z/proj      /proj   nfs     rw      0       0
    fs.mini.emulab.net:/z/groups    /groups nfs     rw      0       0
    fs.mini.emulab.net:/var         /usr/testbed/usersvar nfs ro,soft,-b    0
195

196
Note that you will need exports on the fs node (see setup-ops.txt).
197

198 199 200 201 202 203 204 205 206 207
suidperl - In order for setuid perl scripts to work properly, you'll need to:
chmod u+s /usr/bin/suidperl

##### Step 6 - Services to set up

DNS zones - We don't have documentation for creating these yet. Best bet right
now is to ask Utah for a copy of theirs.
Stick:
named_enable="YES"
in /etc/rc.conf
208

Leigh B. Stoller's avatar
Leigh B. Stoller committed
209 210 211 212 213
apache - You should have installed apache with mod_ssl, and php4.
have an auto-generated config file that you can install by changing to
the apache subdir of your build tree and running 'gmake install'.

Some apache installations may expect to find their
214 215 216 217 218 219 220 221
config file at /usr/local/etc/apache/httpd.conf, rather than apache.conf (where
ours gets installed.) Just symlink apache.conf to httpd.conf if you have
trouble with this. Also our config file expects to find SSL certificates in:
/usr/local/etc/apache/ssl.crt/www.<sitename>.crt and
SSLCertificateKeyFile /usr/local/etc/apache/ssl.key/www.<sitename>.net.key
(where <sitename> is OURSITE from the configure defs file.) Make sure yours
go there, or edit the apache.conf file appropriately.

222 223 224 225 226
inetd - In FreeBSD, you need to prevent inetd from rate-limiting connections
(an attempt to defend against DOS attacks, but very annoying in a testbed
environment). Put the following in /etc/rc.conf:
inetd_flags="-wW -R 0"

227
Local  Only:
228 229 230 231 232 233 234 235 236 237 238 239 240
tftp - Should have the following line in /etc/inetd.conf
tftp    dgram   udp wait    nobody  /usr/libexec/tftpd  tftpd /tftpboot /proj
(make sure to HUP inetd)

ntpd: The boss node should be running ntpd. In FreeBSD, you can enable this with
the line
xntpd_enable="YES"
in /etc/rc.conf. Check out the ntpd man page for configuration information.

cvsupd - Minor changes to images can be distributed at boot time with cvsup.
See doc/newimage.txt for an overview of setting up a sup tree. Make sure to
copy over the old one (if it exists), and make sure cvsupd is running (there's
an example rc.d script in the rc.d/ directory of the testbed CVS tree.) Create
241
a group named 'root', with any gid. This is because cvsup uses the name of
242 243 244 245
the group, rather than its gid, to determine what group the file should belong
to. Since Linux uses 'root' instead of BSD's 'wheel', this is needed for the
Linux sup tree.

246
Local Only:
247 248 249 250 251 252
syslogd - Normally, sylogd on FreeBSD is run with the '-s' flag to prevent
logging to it over the network. We use network logging, so we need this
feature. Re-enable it by putting:
syslogd_flags=""
in /etc/rc.conf

253
Local Only:
254 255 256 257 258 259 260 261 262
dhcpd - Need to install the dhcpd config file. The old (deprecated) location was
/usr/site/bin/dhcp/dhcpd.conf. The new location (and the place you should
install it if you used the 'isc-dhcpd' port) is /usr/local/etc/dhcpd.conf .
After you've filled the nodes and interfaces tables, (described in the database
setup documentation) use the dhcpd_makeconf script, along with the template in
the dhcpd directory of the CVS repository, to generate the dhcpd.conf file.

##### Step 7 - Misc. Files and Services

263
Local Only:
264 265 266 267 268 269 270 271 272 273 274 275 276 277 278
SNMP MIBs - MIBs go in /usr/local/share/snmp/mibs. In addition to the ones
installed by the ucd-snmp package, you'll need MIBs for Cisco and Intel
switches. You can grab the Cisco MIBs from:
ftp.cisco.com/pub/mibs
The Intel ones can be found from the site for the 510T switches at:
http://www.intel.com/network/connectivity/products/exp510t.htm
If you have SNMP-controllable APC power controllers, grab the 'PowerNet MIB'
from:
http://www.apcc.com/tools/download/
Now, a step that involves some voodoo I don't quite understand: make sure that
/usr/local/share/snmp/mibs/.index exists (touch it if it doesn't), and chmod it
to 666. Now, do an snmpwalk of some device (eg. 'snmpwalk cisco1 public') -
this will force the .index file to get rebuilt. Suggestions of better ways to
rebuild this file are welcome!

279
SSH - You'll probably also want to add
280
PermitRootLogin yes
281
to /etc/ssh/sshd_config (and HUP sshd) so that you can log in as root remotely
282

283 284
/etc/syslog.conf needs entries for some of our own services. Example:
!bootinfo
285
*.*                     /usr/testbed/log/bootinfo.log
286
!tmcd
287
*.*                     /usr/testbed/log/tmcd.log
288
!capture
289
*.*                     /usr/testbed/log/tiplogs/capture.log
290 291
!dhcpd
*.*                     /usr/testbed/log/dhcpd.log
292 293 294 295
!capserver
*.*                     /usr/testbed/log/capserver.log
!frisbeed
*.*                     /usr/testbed/log/frisbeed.log
296 297
All of these logs should be created before you HUP syslogd or reboot - All of
them can be world-readable
298

299
cron jobs: We currently have two cron jobs running for the testbed. Both can be
300 301
run out of /etc/crontab
45	1	*	*	*	root	/usr/testbed/sbin/backup
302
*/5	*	*	*	*	root	/usr/testbed/sbin/node_status
303 304
Don't forget to HUP cron!

305
You may want a program to allow administrator-types to run stuff easily as root.
306
Here at Utah, we have two: su1 (developed locally) and sudo (installed from
307
FreeBSD ports) - don't forget to get it set up! Our strategy on boss was to
308
give everyone in the wheel group unrestricted sudo access with:
309
%wheel  ALL=(ALL) NOPASSWD: ALL
310

Mac Newbold's avatar
Mac Newbold committed
311 312 313 314 315 316 317
checkpass - in the testbed software:
    cd tbsetup/checkpass/cracklib,2.7
    make all
    make install
  Note that these steps depend on having the dictionaries 
  /usr/share/dict/{propernames,words} available (standard for FreeBSD).
  If they're in different places, edit the obvious makefile vars.
318

319

320 321 322 323
SSH keys - Generate an SSH key for root by running ssh-keygen. Put an empty
passphrase on it. You'll want to copy boss:/root/.ssh/identity.pub to
ops:/root/.ssh/authorized_keys so that boss has the appropriate access on ops.

324 325 326 327
Process accounting - We generally turn on process accounting, by putting
accounting_enable="YES"
in /etc/rc.conf .

328
##### Copying from an old boss node
329 330 331

If you're simply moving from one boss node to another, there are a few files
and trees you'll want to make sure to copy over:
332

333
/usr/testbed/images/
334
/tftpboot/ (a link to /usr/testbed/tftpboot)
335 336 337 338 339
/etc/namedb/
/etc/master.password
/etc/group
/usr/testbed/sup/
/usr/site/
340 341
/root/.ssh
/etc/ssh
342

343
Right before bringing the new boss node online (if copying from an old boss
344
node), make sure to have a copy of the latest versions of:
345 346 347 348
* The database
* The sup tree
* The dhcpd.conf file
* The DNS records
Robert Ricci's avatar
Robert Ricci committed
349
* The password file